Filter by
Manufacturer Model Number
Container Type
Elongation
Manufacturer
Formulation
Shear Strength
Begins to Harden
Cure Type
Type
Adhesive Type
Container Size
Consistency
Mixing Required
Maximum Temperature
Peel Strength
Viscosity
Approximate Linear Coverage @ Bead Diameter
DFARS Specialty Metals
Export Control Classification Number (ECCN)
Fitting Connection
REACH
RoHS
Color
Mix Ratio
About Structural Adhesives
More
High-Strength Acrylic Structural Adhesives
With excellent shear strength, these acrylics form stronger bonds than our standard acrylic structural adhesives. Acrylics bond to the widest range of materials, especially plastics, and require the least amount of surface preparation.
The size listed is the combined total of the two parts. Use cartridges with a dispensing gun and mixer nozzle to simultaneously mix and dispense adhesives.
Container | Strength | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Mfr. Model No. | Size, fl. oz. | Type | Begins to Harden | Reaches Full Strength | Shear, lbs./sq. in. | Peel, lbs./in. wd. | Mix Ratio | Consistency (Viscosity) | Temp. Range, °F | Color | For Joining | Each | |
Loctite® Adhesives | |||||||||||||
| H3000 | 1.69 | Cartridge | 5 min. | 24 hrs. | 4,150 | 45 | 1:1 | Thick Liquid (45,000 cP) | -65° to 250° | Off-White | Metal, Plastic, Rubber | 0000000 | 000000 |
| H3000 | 13.5 | Cartridge | 5 min. | 24 hrs. | 4,150 | 45 | 1:1 | Thick Liquid (45,000 cP) | -65° to 250° | Off-White | Metal, Plastic, Rubber | 0000000 | 00000 |
Mixer Nozzles, Plungers, and Dispensing Guns