Filter by
Manufacturer Model Number
Shear Strength
For Joining
For Use On
Container Type
Viscosity
Peel Strength
Fitting Connection
Maximum Temperature
Type
Formulation
Manufacturer
Elongation
Container Size
Adhesive Type
Begins to Harden
Mix Ratio
Cure Type
Reaches Full Strength
DFARS Specialty Metals
Export Control Classification Number (ECCN)
REACH
RoHS
Consistency
Minimum Temperature
Specifications Met
About Structural Adhesives
More
Slow-Set Epoxy Structural Adhesives
To allow time to adjust and position parts, these epoxies remain workable for at least 90 minutes. The strongest and most weather- and chemical-resistant structural adhesives, epoxies work especially well on metals.
These have two parts that must be mixed. The size listed is the combined total of the two parts. Use cartridges with a dispensing gun and mixer nozzle to simultaneously mix and dispense adhesives.
M-121HP bonds dissimilar materials and withstands rapid changes in temperature.
Loctite® Adhesives
Container | Strength | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Mfr. Model No. | Size, fl. oz. | Type | Begins to Harden | Reaches Full Strength | Shear, lbs./sq. in. | Peel | Mix Ratio | Consistency (Viscosity) | Temp. Range, °F | Specifications Met | For Joining | Each | |
| M-121HP | 1.69 | Cartridge | 2 hrs. | 24 hrs. | 4,800 | Not Rated | 2:1 | Thick Liquid (11,000 cP) | -65° to 300° | ISO 10993 | Metal, Metal to Plastic, Metal to Rubber, Metal to Glass, Plastic, Plastic to Rubber, Plastic to Glass, Rubber, Rubber to Glass, Ceramic, Glass | 0000000 | 000000 |