About Ball and Roller Bearings
More
About Moment Loads
More
Low-Profile Mounted Ball Bearings with Two-Bolt Flange

Designed with a thin, compact housing, these bearings are good for space-constrained applications. Seals block out dust and contaminants.
Steel bearings are stronger than stainless steel bearings, but not as corrosion resistant.
Stainless steel bearings are more corrosion resistant than steel bearings.
Self-aligning bearings compensate for shaft misalignment.
For technical drawings and 3-D models, click on a part number.
Overall | Mounting | Radial Load Cap., lbs. | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Shaft Dia. | Ht. | Lg. | Wd. | Flange Thick. | Hole Dia. | Hole Ctr.-to-Ctr. | Dynamic | Static | Max. Speed, rpm | Min. Temp. Range, °F | Max. Temp. Range, °F | Alignment Style | Lubrication | Each | |
Sealed 440C Stainless Steel Bearings with 304 Stainless Steel Housing | |||||||||||||||
Shaft Mount Type: Set Screw | |||||||||||||||
5/8" | 2 5/16" | 3 3/16" | 1 5/64" | 5/32" | 9/32" | 2 1/2" | 1,800 | 860 | 5,800 | 0° | 210° | Self Aligning | Lubricated | 0000000 | 000000 |
3/4" | 2 5/8" | 3 9/16" | 1 7/32" | 5/32" | 11/32" | 2 13/16" | 2,450 | 1,200 | 5,800 | 0° | 210° | Self Aligning | Lubricated | 0000000 | 00000 |
1" | 2 51/64" | 3 3/4" | 1 11/32" | 5/32" | 11/32" | 3" | 2,650 | 1,400 | 5,100 | 0° | 210° | Self Aligning | Lubricated | 0000000 | 00000 |
Sealed Steel Bearings with Steel Housing | |||||||||||||||
Shaft Mount Type: Set Screw | |||||||||||||||
3/8" | 1 1/8" | 2 1/2" | 11/16" | 1/32" | 5/16" | 1 7/8" | 580 | 300 | 3,000 | Not Rated | 250° | Fixed Alignment | Lubricated | 0000000 | 00000 |
1/2" | 1 7/8" | 3 3/4" | 1 1/64" | 1/16" | 7/16" | 2 7/8" | 1,600 | 1,000 | 3,000 | Not Rated | 250° | Fixed Alignment | Lubricated | 0000000 | 00000 |
1/2" | 2 5/16" | 3 3/16" | 29/32" | 5/32" | 9/32" | 2 1/2" | 2,100 | 1,050 | 5,800 | 0° | 210° | Self Aligning | Lubricated | 0000000 | 00000 |
5/8" | 1 7/8" | 3 3/4" | 1 1/64" | 1/16" | 7/16" | 2 7/8" | 1,600 | 1,000 | 3,000 | Not Rated | 250° | Fixed Alignment | Lubricated | 0000000 | 00000 |
5/8" | 2 5/16" | 3 3/16" | 29/32" | 5/32" | 9/32" | 2 1/2" | 2,100 | 1,050 | 5,800 | 0° | 210° | Self Aligning | Lubricated | 0000000 | 00000 |
3/4" | 2 1/4" | 4 1/8" | 1 1/8" | 1/16" | 7/16" | 3 1/4" | 1,850 | 1,350 | 3,000 | Not Rated | 250° | Fixed Alignment | Lubricated | 0000000 | 00000 |
3/4" | 2 5/8" | 3 17/32" | 1 1/64" | 5/32" | 23/64" | 2 13/16" | 2,850 | 1,450 | 5,800 | 0° | 210° | Self Aligning | Lubricated | 0000000 | 00000 |
7/8" | 2 25/32" | 3 3/4" | 1 1/16" | 5/32" | 23/64" | 2 63/64" | 3,100 | 1,750 | 5,100 | 0° | 210° | Self Aligning | Lubricated | 0000000 | 00000 |
1" | 2 1/4" | 4 1/8" | 1 1/8" | 1/16" | 7/16" | 3 1/4" | 1,850 | 1,350 | 3,000 | Not Rated | 250° | Fixed Alignment | Lubricated | 0000000 | 00000 |
1" | 2 25/32" | 3 3/4" | 1 1/8" | 5/32" | 23/64" | 3" | 3,100 | 1,750 | 5,100 | 0° | 210° | Self Aligning | Lubricated | 0000000 | 00000 |
1 1/8" | 3 5/16" | 4 7/16" | 1 3/16" | 5/32" | 7/16" | 3 9/16" | 4,350 | 2,500 | 4,300 | 0° | 210° | Self Aligning | Lubricated | 0000000 | 00000 |
1 3/16" | 3 5/16" | 4 7/16" | 1 3/16" | 13/64" | 7/16" | 3 9/16" | 4,350 | 2,500 | 4,300 | 0° | 210° | Self Aligning | Lubricated | 0000000 | 00000 |
1 1/4" | 3 5/16" | 4 7/16" | 1 3/16" | 5/32" | 7/16" | 3 9/16" | 4,350 | 2,500 | 4,300 | 0° | 210° | Self Aligning | Lubricated | 0000000 | 00000 |
1 3/8" | 3 11/16" | 4 13/16" | 1 17/64" | 5/32" | 7/16" | 3 15/16" | 5,750 | 3,450 | 3,700 | 0° | 210° | Self Aligning | Lubricated | 0000000 | 00000 |
Low-Profile Mounted Ball Bearings



Designed with a thin, compact housing, these bearings are good for space-constrained applications.
Bearings with steel housing are stronger than bearings with stainless steel and aluminum housings. They are self-aligning to compensate for shaft misalignment. Seals block out dust and contaminants.
Bearings with 304 stainless steel housing are more corrosion resistant than those with steel and aluminum housings. They are self-aligning to compensate for shaft misalignment. Seals block out dust and contaminants.
Sealed bearings block out dust and other contaminants better than shielded bearings.
Shielded bearings dissipate heat more efficiently than sealed bearings.
Bearings with extended inner ring provide additional shaft support.
For technical drawings and 3-D models, click on a part number.
Overall | Mounting | Radial Load Cap., lbs. | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Shaft Dia. | Center Ht. | Ht. | Lg. | Wd. | Hole Lg. | Hole Wd. | Hole Ctr.-to-Ctr. | Dynamic | Static | Max. Speed, rpm | Temp. Range, °F | Alignment Style | Lubrication | Each | |
Sealed Steel Bearings with Steel Housing | |||||||||||||||
Shaft Mount Type: Set Screw | |||||||||||||||
1/2" | 7/8" | 1 23/32" | 3 3/8" | 1 1/8" | 1/2" | 11/32" | 2 43/64" | 2,140 | 1,070 | 5,800 | 0° to 210° | Self Aligning | Lubricated | 0000000 | 000000 |
5/8" | 7/8" | 1 23/32" | 3 3/8" | 1 1/8" | 1/2" | 11/32" | 2 43/64" | 2,140 | 1,070 | 5,800 | 0° to 210° | Self Aligning | Lubricated | 0000000 | 00000 |
3/4" | 1" | 2" | 3 27/32" | 1 21/64" | 1/2" | 13/32" | 3" | 2,870 | 1,490 | 5,800 | 0° to 210° | Self Aligning | Lubricated | 0000000 | 00000 |
7/8" | 1 1/8" | 2 7/32" | 4 1/4" | 1 25/64" | 9/16" | 13/32" | 3 25/64" | 3,140 | 1,760 | 5,100 | 0° to 210° | Self Aligning | Lubricated | 0000000 | 00000 |
1" | 1 1/8" | 2 7/32" | 4 1/4" | 1 25/64" | 9/16" | 13/32" | 3 3/8" | 3,140 | 1,760 | 5,100 | 0° to 210° | Self Aligning | Lubricated | 0000000 | 00000 |
1 1/8" | 1 5/16" | 2 5/8" | 4 19/32" | 1 39/64" | 9/16" | 13/32" | 3 3/4" | 4,380 | 2,540 | 4,300 | 0° to 210° | Self Aligning | Lubricated | 0000000 | 00000 |
1 3/16" | 1 5/16" | 2 5/8" | 4 29/32" | 1 1/2" | 9/16" | 13/32" | 3 3/4" | 4,380 | 2,540 | 4,300 | 0° to 210° | Self Aligning | Lubricated | 0000000 | 00000 |
1 3/8" | 1 9/16" | 3 1/8" | 5 3/4" | 1 39/64" | 3/4" | 17/32" | 4 1/4" | 5,770 | 3,460 | 3,700 | 0° to 210° | Self Aligning | Lubricated | 0000000 | 00000 |
Overall | Mounting | Radial Load Cap., lbs. | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Shaft Dia. | Center Ht. | Ht. | Lg. | Wd. | Hole Dia. | Hole Ctr.-to-Ctr. | Dynamic | Static | Max. Speed, rpm | Temp. Range, °F | Alignment Style | Lubrication | Each | |
Shielded Steel Bearings with Aluminum Housing | ||||||||||||||
Shaft Mount Type: Press Fit | ||||||||||||||
1/8" | 3/8" | 3/4" | 1 7/16" | 13/64" | 1/8" | 1 1/8" | 120 | 40 | 63,000 | -20° to 245° | Fixed Alignment | Lubricated | 000000 | 000000 |
3/16" | 3/8" | 3/4" | 1 7/16" | 13/64" | 1/8" | 1 1/8" | 240 | 85 | 60,000 | -20° to 245° | Fixed Alignment | Lubricated | 000000 | 00000 |
1/4" | 3/8" | 3/4" | 1 7/16" | 13/64" | 1/8" | 1 1/8" | 200 | 75 | 48,000 | -20° to 245° | Fixed Alignment | Lubricated | 000000 | 00000 |
5/16" | 3/8" | 3/4" | 1 7/16" | 13/64" | 1/8" | 1 1/8" | 100 | 45 | 45,000 | -20° to 245° | Fixed Alignment | Lubricated | 000000 | 00000 |
3/8" | 9/16" | 1 1/8" | 2 1/4" | 25/64" | 13/64" | 1 3/4" | 630 | 250 | 31,000 | -20° to 245° | Fixed Alignment | Lubricated | 000000 | 00000 |
4mm | 3/8" | 3/4" | 1 7/16" | 13/64" | 1/8" | 1 1/8" | 182 | 61 | 57,000 | -20° to 245° | Fixed Alignment | Lubricated | 000000 | 00000 |
5mm | 3/8" | 3/4" | 1 7/16" | 13/64" | 1/8" | 1 1/8" | 205 | 76 | 50,000 | -20° to 245° | Fixed Alignment | Lubricated | 0000000 | 00000 |
6mm | 3/8" | 3/4" | 1 7/16" | 13/64" | 1/8" | 1 1/8" | 135 | 52 | 50,000 | -20° to 245° | Fixed Alignment | Lubricated | 0000000 | 00000 |
8mm | 3/8" | 3/4" | 1 7/16" | 13/64" | 1/8" | 1 1/8" | 103 | 49 | 46,000 | -20° to 245° | Fixed Alignment | Lubricated | 0000000 | 00000 |
10mm | 9/16" | 1 1/8" | 2 1/4" | 25/64" | 13/64" | 1 3/4" | 326 | 151 | 34,000 | -20° to 245° | Fixed Alignment | Lubricated | 0000000 | 00000 |
Overall | Mounting | Radial Load Cap., lbs. | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Shaft Dia. | Center Ht. | Ht. | Lg. | Wd. | Hole Dia. | Hole Ctr.-to-Ctr. | Dynamic | Static | Max. Speed, rpm | Temp. Range, °F | Alignment Style | Lubrication | Each | |
Shielded Steel Bearings with Aluminum Housing and Extended Inner Ring | ||||||||||||||
Shaft Mount Type: Press Fit | ||||||||||||||
3/16" | 3/8" | 3/4" | 1 7/16" | 13/64" | 1/8" | 1 1/8" | 240 | 85 | 60,000 | -20° to 245° | Fixed Alignment | Lubricated | 000000 | 000000 |
1/4" | 3/8" | 3/4" | 1 7/16" | 13/64" | 1/8" | 1 1/8" | 200 | 75 | 48,000 | -20° to 245° | Fixed Alignment | Lubricated | 000000 | 00000 |
5/16" | 3/8" | 3/4" | 1 7/16" | 13/64" | 1/8" | 1 1/8" | 100 | 45 | 45,000 | -20° to 245° | Fixed Alignment | Lubricated | 000000 | 00000 |
Overall | Mounting | Radial Load Cap., lbs. | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Shaft Dia. | Center Ht. | Ht. | Lg. | Wd. | Hole Lg. | Hole Wd. | Hole Ctr.-to-Ctr. | Dynamic | Static | Max. Speed, rpm | Temp. Range, °F | Alignment Style | Lubrication | Each | |
Sealed 440C Stainless Steel Bearings with 304 Stainless Steel Housing | |||||||||||||||
Shaft Mount Type: Set Screw | |||||||||||||||
5/8" | 7/8" | 1 3/4" | 3 5/8" | 1 1/8" | 1/2" | 11/32" | 2 11/16" | 1,830 | 860 | 5,800 | 0° to 210° | Self Aligning | Lubricated | 0000000 | 000000 |
3/4" | 1" | 2 1/16" | 4 1/8" | 1 1/4" | 1/2" | 13/32" | 3" | 2,450 | 1,200 | 5,800 | 0° to 210° | Self Aligning | Lubricated | 0000000 | 00000 |
1" | 1 1/8" | 2 7/32" | 4 1/2" | 1 3/8" | 9/16" | 13/32" | 3 3/8" | 2,670 | 1,410 | 5,100 | 0° to 210° | Self Aligning | Lubricated | 0000000 | 00000 |
1 3/16" | 1 5/16" | 2 5/8" | 4 7/8" | 1 1/2" | 9/16" | 13/32" | 3 3/4" | 3,700 | 2,030 | 4,300 | 0° to 210° | Self Aligning | Lubricated | 0000000 | 00000 |
Low-Profile Sleeve Bearing Carriages and Guide Rails









For applications with low clearance, these carriages protrude less than 5 mm above their rails. Use them for light to moderate loads, as well as frequent starting and stopping applications where tight tolerances are not required. Sleeve bearings allow them to outperform ball bearings in wet, dirty, and high-vibration environments. Mount in any orientation without affecting load capacity.
For technical drawings and 3-D models, click on a part number.
Brass Carriages and PTFE Plastic Bearings | ||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mounting | Anodized Aluminum Guide Rails | |||||||||||||||
For Rail Wd., mm | Static Load Cap., lbs. | O'all Ht., mm | Carriage Wd., mm | Carriage Lg., mm | Max. Temp., °F | No. of Holes | Hole Thread Size | Hole Thread Pitch, mm | Hole Dp., mm | Fasteners Included | Each | Rail Lengths, mm | Per mm | |||
A | 17 | 10 | 8 | 15 | 20 | 190° | 2 | M3 | 0.5 | 5 | No | 000000 | 00000 | 000000 | 00000 |
Zinc Carriages and PTFE Plastic Bearings | |||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mounting | Anodized Aluminum Guide Rails | ||||||||||||||||
For Rail Wd., mm | Static Load Cap., lbs. | O'all Ht., mm | Carriage Wd., mm | Carriage Lg., mm | Max. Temp., °F | No. of Holes | Hole Dia., mm | Hole Thread Size | Hole Thread Pitch, mm | Hole Dp., mm | Fasteners Included | Each | Rail Lengths, mm | Per mm | |||
A | 40 | 150 | 14.5 | 34 | 50 | 190° | 2 | __ | M4 | 0.7 | 8 | No | 0000000 | 000000 | 000000 | 00000 | |
B | 27 | 110 | 10 | 24 | 40 | 190° | 2 | 4.5 | __ | __ | 5 | No | 0000000 | 0000 | 000000 | 000 | |
C | 80 | 220 | 12 | 72 | 80 | 190° | 4 | __ | M4 | 0.7 | 7 | No | 0000000 | 00000 | 000000 | 000 |
High-Cycle Low-Profile Ball Bearing Carriages and Guide Rails




Run many cycles in tight spaces before replacing or re-greasing carriages. These low-profile carriages have a plastic cage surrounding the ball bearings to keep them from colliding with each other. This reduces the noise, heat, friction, and dust they produce, so carriages can travel back and forth along the rail many times. The cage also traps grease around the balls and makes sure they roll in the same direction. Ball bearings provide accurate movement and positioning at high speeds under heavy loads. Made of stainless steel, all of these carriages and guide rails are corrosion resistant. Each carriage has end seals to keep lubricant in and dirt out.
Mounting hole plugs protect mounting fasteners from corrosion.
For technical drawings and 3-D models, click on a part number.
440 Stainless Steel Carriages | 440 Stainless Steel Guide Rails | Mounting Hole Plugs | |||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
For Rail Wd., mm | Dynamic Load Cap., lbs. | O'all Ht., mm | Carriage Wd., mm | Carriage Lg., mm | Each | Rail Lengths, mm | Per mm | Each | |||
Load Fastening From Top | |||||||||||
7 | 330 | 8 | 17 | 23.4 | 0000000 | 000000 | 000000 | 00000 | 000000 | 00 | |
9 | 600 | 10 | 20 | 30.8 | 0000000 | 00000 | 000000 | 000 | 000000 | 00 | |
9 | 780 | 10 | 20 | 40.8 | 0000000 | 000000 | 000000 | 000 | 000000 | 00 | |
12 | 890 | 13 | 27 | 34.4 | 0000000 | 00000 | 000000 | 000 | 000000 | 00000 | |
12 | 1,300 | 13 | 27 | 47.1 | 0000000 | 000000 | 000000 | 000 | 000000 | 000 | |
14 | 450 | 9 | 25 | 31 | 0000000 | 00000 | 000000 | 000 | 000000 | 00 | |
15 | 1,450 | 16 | 32 | 43 | 0000000 | 00000 | 000000 | 000 | 000000 | 000 | |
15 | 2,150 | 16 | 32 | 60.8 | 0000000 | 000000 | 000000 | 000 | 000000 | 000 | |
18 | 730 | 12 | 30 | 39 | 0000000 | 00000 | 000000 | 000 | 000000 | 000 | |
18 | 940 | 12 | 30 | 50.7 | 0000000 | 000000 | 000000 | 000 | 000000 | 000 | |
24 | 1,200 | 14 | 40 | 44.5 | 0000000 | 00000 | 000000 | 000 | 000000 | 00 | |
24 | 1,600 | 14 | 40 | 59.5 | 0000000 | 000000 | 000000 | 000 | 000000 | 00 | |
42 | 2,050 | 16 | 60 | 55.5 | 0000000 | 000000 | 000000 | 000 | 000000 | 00 | |
42 | 2,750 | 16 | 60 | 74.5 | 0000000 | 000000 | 000000 | 000 | 000000 | 00 |