Mount Type Mount Type |
|---|
 |  |
| Screw | Snap In |
 |  |
| Threaded Hole | Threaded Stud |
 | |
| Weld On |
Mounting Plate Width Mounting Plate Width |
|---|
|
|
|
Width Width |
|---|
Back Projection Back Projection |
|---|
|
|
|
For Panel Cutout Width For Panel Cutout Width |
|---|
For Panel Cutout Height For Panel Cutout Height |
|---|
Height Height |
|---|
Mounting Plate Height Mounting Plate Height |
|---|
|
|
|
RoHS (Restriction of Hazardous Substances) RoHS (Restriction ofHazardous Substances) |
|---|
|
Projection Projection |
|---|
|
|
|
Grip Style Grip Style |
|---|
 |  |
| Round | Rectangular |
 | |
| Oval |
For Panel Thickness For Panel Thickness |
|---|
|
|
DFARS (Defense Acquisition Regulations Supplement) DFARS (Defense AcquisitionRegulations Supplement)  |
|---|
REACH (Registration, Evaluation, Authorization and Restriction of Chemicals) REACH (Registration,Evaluation, Authorization and Restriction of Chemicals) |
|---|
|
Unthreaded Through-Hole Recessed Pull Handles
Fasten these handles directly to the front of your surface to open and close a variety of doors and drawers, including those on furniture, machines, and equipment. They fit into a cutout, so they are flush with the mounting surface.
Plastic handles are a lightweight alternative to metal. They resist oil, grease, and solvents.
Steel knobs are stronger than iron. They are plated or coated for rust resistance.
Stainless steel handles have excellent corrosion resistance, making them the best choice for harsh environments. They also have good chemical resistance.
For technical drawings and 3-D models, click on a part number.
For Panel Cutout | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Ht. | Wd. | Back Projection | Dia. | Ht. | Wd. | No. of Mount. Holes | Mount. Fasteners Included | Mount. Screw Size | Temp. Range, °F | Each | |
Style 1 | |||||||||||
Black Plastic | |||||||||||
| 2 3/16" | 2 3/16" | 5/8" | 1.68" | __ | __ | 4 | No | No. 6 | -30° to 280° | 00000000 | 00000 |
Style 2 | |||||||||||
Black Plastic | |||||||||||
| 3 5/8" | 2 3/8" | 11/16" | __ | 3.06" | 1.68" | 4 | No | No. 6 | -30° to 280° | 00000000 | 0000 |
Gray Plastic | |||||||||||
| 3 5/8" | 2 3/8" | 11/16" | __ | 3.06" | 1.68" | 4 | No | No. 6 | -30° to 280° | 00000000 | 0000 |
White Plastic | |||||||||||
| 3 5/8" | 2 3/8" | 11/16" | __ | 3.06" | 1.68" | 4 | No | No. 6 | -30° to 280° | 00000000 | 0000 |
Style 3 | |||||||||||
Zinc-Plated Steel—Dull | |||||||||||
| 3 1/4" | 1 3/4" | 9/16" | __ | 2.25" | 0.91" | 2 | Yes | No. 4 | __ | 000000 | 00000 |
Style 4 | |||||||||||
Beige Powder-Coated Steel | |||||||||||
| 6" | 4" | 7/8" | __ | 3.63" | 2" | 4 | Yes | 3/8", No. 12 | __ | 000000 | 00000 |
Zinc-Plated Steel—Dull | |||||||||||
| 6" | 4" | 7/8" | __ | 3.63" | 2" | 4 | Yes | 3/8", No. 12 | __ | 0000000 | 00000 |
Style 5 | |||||||||||
304 Stainless Steel—Dull | |||||||||||
| 5" | 3 1/2" | 7/8" | __ | 3.13" | 1.75" | 4 | Yes | No. 8 | __ | 0000000 | 00000 |
316 Stainless Steel—Dull | |||||||||||
| 5" | 3 1/2" | 7/8" | __ | 3.13" | 1.75" | 4 | Yes | No. 8 | __ | 0000000 | 00000 |
Style 6 | |||||||||||
Black Powder-Coated Steel | |||||||||||
| 5 1/4" | 3 3/8" | 7/8" | __ | 3.81" | 2.81" | 4 | Yes | No. 10 | __ | 0000000 | 000000 |
Style 7 | |||||||||||
Beige Powder-Coated Iron | |||||||||||
| 6 3/4" | 5 1/8" | 1 11/16" | __ | 4.88" | 4.13" | 4 | No | 5/16" | __ | 000000 | 00000 |
Concealed Unthreaded Through-Hole Recessed Pull Handles
Press on the top of the handle grip and it rotates out for use. Often used on hatches and pocket doors, these handles fit into a cutout, so they are flush with the mounting surface. Fasten them directly to the front of the surface. Made of stainless steel, these handles have excellent corrosion resistance and good chemical resistance.
Snap-In Recessed Pull Handles
Designed to snap into a cutout, these handles are flush with the mounting surface. Use them to open and close a variety of doors and drawers, including those on furniture, machines, and equipment. Made of plastic, all of these handles resist oil, grease, and solvents.
For technical drawings and 3-D models, click on a part number.
For Panel Cutout | |||||||
|---|---|---|---|---|---|---|---|
| Ht. | Wd. | Back Projection | Ht. | Wd. | For Panel Thick. | Each | |
Style A | |||||||
Black Plastic | |||||||
| 1" | 3 15/16" | 11/16" | 0.85" | 3.827" | 0.03" | 0000000 | 00000 |
| 1 7/16" | 3 11/16" | 11/16" | 1.21" | 3.45" | 0.04"-0.055" | 0000000 | 0000 |
| 1 7/16" | 3 11/16" | 11/16" | 1.21" | 3.45" | 0.055"-0.07" | 0000000 | 0000 |
| 1 7/16" | 3 11/16" | 11/16" | 1.21" | 3.45" | 0.07"-0.085" | 0000000 | 0000 |
| 1 7/16" | 3 11/16" | 11/16" | 1.21" | 3.45" | 0.085"-0.1" | 0000000 | 0000 |
| 1 7/16" | 5 7/16" | 11/16" | 1.21" | 5.2" | 0.04"-0.055" | 0000000 | 0000 |
| 1 7/16" | 5 7/16" | 11/16" | 1.21" | 5.2" | 0.055"-0.07" | 0000000 | 0000 |
| 1 7/16" | 5 7/16" | 11/16" | 1.21" | 5.2" | 0.07"-0.085" | 0000000 | 0000 |
| 1 7/16" | 5 7/16" | 11/16" | 1.21" | 5.2" | 0.085"-0.1" | 0000000 | 0000 |
| 1 1/2" | 2 3/4" | 11/16" | 1.283" | 2.587" | 0.03" | 0000000 | 0000 |
| 1 3/4" | 3 15/16" | 7/8" | 1.575" | 3.791" | 0.03" | 0000000 | 0000 |
Style B | |||||||
Black Plastic | |||||||
| 1 1/2" | 2 3/4" | 9/16" | 1.13"-1.213" | 1.811" | 0.02"-0.125" | 0000000 | 0000 |
| 1 3/4" | 3 9/16" | 9/16" | 1.366"-1.449" | 2.6" | 0.02"-0.125" | 0000000 | 0000 |
| 2" | 4 5/16" | 9/16" | 1.602"-1.685" | 3.464" | 0.02"-0.125" | 0000000 | 0000 |
| 2 1/2" | 5 1/2" | 9/16" | 2.154"-2.236" | 4.488" | 0.02"-0.125" | 0000000 | 0000 |
Off-White Plastic | |||||||
| 2" | 4 5/16" | 9/16" | 1.602"-1.685" | 3.464" | 0.02"-0.125" | 0000000 | 0000 |
| 2 1/2" | 5 1/2" | 9/16" | 2.154"-2.236" | 4.488" | 0.02"-0.125" | 0000000 | 0000 |
Threaded-Stud Recessed Pull Handles
Insert studs into holes in your surface and fasten with locknuts from the backside to open and close a variety of doors and drawers, including those on furniture, machines, and equipment. This handle fits into a cutout, so it's flush with the mounting surface. Made of stainless steel it has excellent corrosion resistance and good chemical resistance.
For technical drawings and 3-D models, click on a part number.
For Panel Cutout | Thread | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Style | Ht., mm | Wd., mm | Back Projection, mm | Ht., mm | Wd., mm | Size | Pitch, mm | Lg., mm | Mount. Fasteners Included | Each | |
304 Stainless Steel—Dull | |||||||||||
| 1 | 122 | 62 | 16 | 90 | 40 | M5 | 0.8 | 10 | Yes | 000000 | 00000 |
| 2 | 120 | 60 | 14 | 91 | 45 | M4 | 0.7 | 10 | Yes | 0000000 | 0000 |
| 3 | 152 | 114 | 50 | 115 | 98 | M5 | 0.8 | 10 | Yes | 0000000 | 00000 |
| 4 | 94 | 60 | 12 | 63 | 45 | M4 | 0.7 | 9 | Yes | 0000000 | 00000 |
| 4 | 109 | 64 | 14 | 73 | 42 | M4 | 0.7 | 9 | Yes | 0000000 | 00000 |
| 4 | 138 | 88 | 21 | 99 | 64 | M4 | 0.7 | 9 | Yes | 0000000 | 00000 |
| 5 | 153 | 135 | 35 | 108 | 107 | M5 | 0.8 | 8 | Yes | 0000000 | 00000 |
304 Stainless Steel—Polished | |||||||||||
| 4 | 94 | 60 | 12 | 63 | 45 | M4 | 0.7 | 9 | Yes | 0000000 | 00000 |
| 4 | 109 | 64 | 14 | 73 | 42 | M4 | 0.7 | 9 | Yes | 0000000 | 00000 |
| 4 | 138 | 88 | 21 | 99 | 64 | M4 | 0.7 | 9 | Yes | 0000000 | 00000 |
Weld-On Recessed Pull Handles
This handle provides a stronger connection than those attached with screws or nuts. It fits into a cutout, so it's flush with the mounting surface. Use this handle to open and close a variety of doors and drawers, including those on furniture, machines, and equipment. Made of stainless steel, it has excellent corrosion resistance and good chemical resistance.
For technical drawings and 3-D models, click on a part number.
For Panel Cutout | ||||||
|---|---|---|---|---|---|---|
| Ht., mm | Wd., mm | Back Projection, mm | Ht., mm | Wd., mm | Each | |
304 Stainless Steel—Dull | ||||||
| 122 | 62 | 16 | 90 | 40 | 000000 | 00000 |
Threaded-Hole Recessed Pull Handles
Thread screws through holes from the back of your surface into the handle to open and close a variety of doors and drawers, including those on furniture, machines, and equipment. These handles fit into a cutout, so they're flush with the mounting surface.
Stainless steel handles have excellent corrosion resistance and good chemical resistance. They have two threaded mounting holes.
Plastic handles are a lightweight alternative to metal. They resist oil, grease, and solvents. Use the included tap screws to form mounting holes on these handles.
For Panel Cutout | Mounting Screw | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Ht., mm | Wd., mm | Back Projection, mm | Ht., mm | Wd., mm | For Panel Thick., mm | Thread Dp., mm | No. of Mount. Holes | Mount. Fasteners Included | Size | Thread Pitch, mm | Lg., mm | Each | |
304 Stainless Steel—Dull | |||||||||||||
| 122 | 60 | 16 | 90 | 40 | 3.2-12.7 | 6 | 2 | Yes | M4 | 0.7 | 25 | 000000 | 00000 |
Black ABS Plastic | |||||||||||||
| 123 | 46.7 | 25 | 114 | 38 | 1-1.8 | __ | 2 | Yes | No. 6 | __ | 22 | 0000000 | 0000 |
| 123 | 46.7 | 25 | 114 | 38 | 1.8-3.3 | __ | 2 | Yes | No. 6 | __ | 22 | 0000000 | 0000 |
| 123 | 46.7 | 25 | 114 | 38 | 3.3-4.8 | __ | 2 | Yes | No. 6 | __ | 22 | 0000000 | 0000 |
| 123 | 46.7 | 25 | 114 | 38 | 4.8-6.3 | __ | 2 | Yes | No. 6 | __ | 22 | 0000000 | 0000 |
Unthreaded Through-Hole Recessed Folding Pull Handles with Mounting Plate
Fasten these handles directly to the front of your surface. They fit into a cutout, so they are flush with the mounting surface. Their grip drops out of the way when you let go. Use them to open and close a variety of doors and drawers on chests, crates, furniture, machines, and equipment.
Round grips allow your hand to pivot in any direction.
Oval grips conform to your hand and offer more control than round grips.
Rectangular grip has a flat surface that keeps your hand from slipping, but may be less comfortable than round and oval grips.
Style 5 and 6 handles have a spring-loaded hinge that keeps the grip flush with the mounting plate and prevents rattling when it's not in use.
Steel handles are plated or coated for rust resistance.
Brass and chrome-plated brass handles have good corrosion resistance and are nonmagnetic.
Stainless steel handles have excellent corrosion resistance, making them the best choice for harsh environments. They also have good chemical resistance.
For technical drawings and 3-D models, click on a part number.
Grip | For Panel Cutout | Mounting Plate | |||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Folding Angle | Dia. | Ht. | Thick. | Handle Wd. | Projection | Back Projection | Dia. | Ht. | Wd. | Dia. | Ht. | Wd. | Thick. | No. of Mount. Holes | Mount. Fasteners Included | Mount. Screw Size | Temp. Range, °F | Each | |
Style 1—Round Grip | |||||||||||||||||||
Zinc-Plated Steel—Dull | |||||||||||||||||||
| 110° | 1/4" | __ | __ | 1 7/8" | 1 3/16" | 3/8" | __ | 2 1/4" | 2 3/8" | __ | 5" | 3 1/2" | 3/32" | 3 | No | 1/4" | __ | 0000000 | 00000 |
304 Stainless Steel—Polished | |||||||||||||||||||
| 110° | 1/4" | __ | __ | 1 7/8" | 1 3/16" | 3/8" | __ | 2 1/4" | 2 3/8" | __ | 5" | 3 1/2" | 3/32" | 3 | No | 1/4" | __ | 0000000 | 00000 |
Style 2—Round Grip | |||||||||||||||||||
Zinc-Plated Steel—Polished | |||||||||||||||||||
| 110° | 5/16" | __ | __ | 1 1/2" | 2" | 7/16" | __ | 2 3/4" | 2 1/4" | __ | 3 1/2" | 3" | 1/16" | 4 | Yes | No. 7 | __ | 0000000 | 00000 |
Style 3—Oval Grip | |||||||||||||||||||
304 Stainless Steel—Polished | |||||||||||||||||||
| 90° | __ | 1/8" | 3/16" | 11/16" | 1" | 7/16" | __ | 1 3/8" | 1 1/16" | __ | 1 3/4" | 1 1/2" | 1/32" | 4 | No | No. 6 | __ | 00000000 | 0000 |
| 90° | __ | 1/4" | 1/4" | 1 1/16" | 1 1/2" | 7/16" | __ | 1 13/16" | 1 1/2" | __ | 2 9/16" | 2 3/16" | 1/32" | 4 | No | No. 8 | __ | 00000000 | 00000 |
Style 4—Oval Grip | |||||||||||||||||||
Brass—Polished | |||||||||||||||||||
| 90° | __ | 1/8" | 1/8" | 1 1/16" | 1 1/2" | 3/16" | __ | 2 3/16" | 1 11/16" | __ | 2 1/2" | 2" | 1/8" | 4 | No | No. 8 | __ | 00000000 | 00000 |
Chrome-Plated Brass—Polished | |||||||||||||||||||
| 90° | __ | 1/8" | 1/8" | 3/4" | 1 1/8" | 3/8" | __ | 1 3/8" | 1 5/16" | __ | 1 3/4" | 1 1/2" | 1/8" | 4 | No | No. 6 | __ | 00000000 | 00000 |
| 90° | __ | 1/8" | 1/8" | 1 1/16" | 1 1/2" | 3/16" | __ | 2 3/16" | 1 11/16" | __ | 2 1/2" | 2" | 1/8" | 4 | No | No. 8 | __ | 00000000 | 00000 |
316 Stainless Steel—Polished | |||||||||||||||||||
| 90° | __ | 1/8" | 1/8" | 3/4" | 1 1/16" | 3/8" | __ | 1 3/8" | 1 1/8" | __ | 1 7/8" | 1 9/16" | 1/8" | 4 | No | No. 8 | __ | 00000000 | 00000 |
Style 5—Rectangular Grip, Spring-Loaded Hinge | |||||||||||||||||||
304 Stainless Steel—Polished | |||||||||||||||||||
| 90° | __ | 1/4" | 1/4" | 1 11/16" | 1 5/16" | 15/32" | __ | 1 3/4" | 2 5/16" | __ | 2 1/4" | 3" | 1/32" | 4 | No | No. 8 | __ | 00000000 | 00000 |
Style 6—Round Grip, Spring-Loaded Hinge | |||||||||||||||||||
Zinc-Plated Steel with Rubber Grip—Dull | |||||||||||||||||||
| 90° | 7/16" | __ | __ | 4 5/16" | 2 5/8" | 3/8" | __ | 3 1/8" | 5 1/4" | __ | 4" | 6 1/8" | 1/16" | 8 | No | No. 10 | -40° to 240° | 00000000 | 0000 |
| 90° | 3/4" | __ | __ | 4 3/4" | 3" | 5/8" | __ | 3 3/4" | 5 3/4" | __ | 5" | 7" | 1/16" | 14 | No | No. 10 | -40° to 240° | 00000000 | 00000 |
Black Epoxy-Coated Steel with Rubber Grip—Dull | |||||||||||||||||||
| 90° | 3/4" | __ | __ | 4 3/4" | 3" | 5/8" | __ | 3 3/4" | 5 3/4" | __ | 5" | 7" | 1/16" | 14 | No | No. 10 | -40° to 240° | 00000000 | 00000 |
Style 7—Round Grip | |||||||||||||||||||
Zinc-Plated Steel—Dull | |||||||||||||||||||
| 150° | 1/4" | __ | __ | 1 1/4" | 1 7/8" | 1/4" | 3" | __ | __ | 3 1/2" | __ | __ | 1/16" | 2 | No | 1/4" | __ | 0000000 | 0000 |
Style 8—Rectangular Grip | |||||||||||||||||||
Chrome-Plated Brass—Polished | |||||||||||||||||||
| 90° | __ | 5/16" | 5/16" | 1 11/16" | 1 3/16" | 5/16" | __ | 1 3/4" | 2 7/16" | __ | 2 3/16" | 2 15/16" | 1/16" | 4 | No | No. 8 | __ | 00000000 | 00000 |
Style 9—Oval Grip | |||||||||||||||||||
316 Stainless Steel—Polished | |||||||||||||||||||
| 90° | __ | 1/4" | 1/4" | 2 3/8" | 1 1/4" | 1/4" | __ | 1 3/4" | 2 5/8" | __ | 2 1/8" | 3" | 1/16" | 4 | No | No. 8 | __ | 00000000 | 00000 |
Style 10—Oval Grip | |||||||||||||||||||
Brass—Polished | |||||||||||||||||||
| 90° | __ | 1/8" | 1/8" | 3/4" | 1 1/16" | 3/8" | __ | 1 3/8" | 1 1/4" | 2" | __ | __ | 1/16" | 3 | No | No. 8 | __ | 00000000 | 00000 |
| 90° | __ | 1/8" | 3/16" | 9/16" | 1 1/16" | 3/8" | __ | 1 5/16" | 1 1/8" | 1 5/8" | __ | __ | 1/16" | 3 | No | No. 8 | __ | 00000000 | 0000 |
Chrome-Plated Brass—Polished | |||||||||||||||||||
| 90° | __ | 1/8" | 1/8" | 3/4" | 1 1/16" | 3/8" | __ | 1 3/8" | 1 1/4" | 2" | __ | __ | 1/16" | 3 | No | No. 8 | __ | 00000000 | 00000 |
| 90° | __ | 1/8" | 3/16" | 9/16" | 1 1/16" | 3/8" | __ | 1 5/16" | 1 1/8" | 1 5/8" | __ | __ | 1/16" | 3 | No | No. 8 | __ | 00000000 | 0000 |
Threaded-Hole Recessed Folding Pull Handles with Mounting Plate
Thread screws through holes from the back of your surface into the handle to install. This handle fits into a cutout, so it's flush with the mounting surface. Its grip drops out of the way when you let go. When not in use, the spring-loaded hinge keeps the grip flush with the mounting plate and prevents rattling. Use this handle to open and close a variety of doors and drawers on chests, crates, furniture, machines, and equipment. Its rectangular grip has a flat surface that keeps your hand from slipping.
Chrome-plated zinc handles have good corrosion resistance.
316 stainless steel handles have excellent corrosion resistance, making them the best choice for harsh environments. They also have good chemical resistance.
For technical drawings and 3-D models, click on a part number.
Grip | For Panel Cutout | Mounting Plate | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Folding Angle | Ht. | Thick. | Material | Handle Wd. | Projection | Back Projection | Ht. | Wd. | Ht. | Wd. | Thick. | No. of Mount. Holes | Mount. Fasteners Included | Temp. Range, °F | Features | Each | |
Rectangular Grip | |||||||||||||||||
Chrome-Plated Zinc—Polished | |||||||||||||||||
| 90° | 11/16" | 9/16" | Rubber | 3 3/4" | 1 13/16" | 11/16" | 3" | 5 5/16" | 3 3/16" | 5 9/16" | 5/32" | 4 | Yes | -10° to 200° | Spring-Loaded Hinge | 00000000 | 0000000 |
316 Stainless Steel—Polished | |||||||||||||||||
| 90° | 1/2" | 5/8" | Stainless Steel | 4 3/16" | 3 3/8" | 15/16" | 3 1/4" | 5 3/4" | 3 13/16" | 5 15/16" | 5/16" | 4 | Yes | Not Rated | Spring-Loaded Hinge | 00000000 | 000000 |
Spring-Loaded Unthreaded Through-Hole Folding Pull Handles with Mounting Plate
When not in use, the spring in these handles keeps the folding grip flush with the mounting plate and prevents rattling. Fasten the handles directly to the front of your surface to open and close a variety of doors and drawers on chests, crates, furniture, machines, and equipment. All have round grips that allow your hand to pivot in any direction.
Style 4 handles fit into a cutout, so they're flush with the mounting surface.
Steel handles are painted or plated for rust resistance.
Stainless steel handles have excellent corrosion resistance, making them the best choice for harsh environments. They also have good chemical resistance.
For technical drawings and 3-D models, click on a part number.
Grip | Mounting Plate | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Folding Angle | Dia. | Material | Handle Wd. | Projection | Back Projection | Pull Cap., lbs. | Ht. | Wd. | Thick. | No. of Mount. Holes | Mount. Fasteners Included | Mount. Screw Size | Temp. Range, °F | Each | |
Style 4—Round Grip | |||||||||||||||
Zinc-Plated Steel—Dull | |||||||||||||||
| 90° | 5/8" | Plastic | 3 3/4" | 2 3/4" | 3/8" | 85 | 4 1/2" | 6" | 1/16" | 8 | No | No. 10 | 15° to 210° | 0000000 | 000000 |
| 90° | 13/16" | Plastic | 4 3/4" | 3 3/8" | 9/16" | 330 | 5" | 7 1/8" | 1/16" | 12 | No | No. 10 | 15° to 210° | 0000000 | 00000 |
304 Stainless Steel—Dull | |||||||||||||||
| 90° | 5/8" | Plastic | 3 3/4" | 2 11/16" | 3/8" | 165 | 4 1/2" | 6" | 1/16" | 8 | No | No. 10 | 15° to 210° | 0000000 | 00000 |