We will reply to your message within an hour.
More
Keep working when temperatures drop—these coatings can be applied in temperatures down to 20° F, when other coatings would fail. Thicker than polyurethane and paint, they protect against abrasion and resist moisture and chemicals.
Apply these coatings in temperatures down to 20° F, when other coatings would fail. They handle high humidity and have superior abrasion, impact, and UV resistance while providing great color and gloss retention.
Some of the thickest and most durable on the market, these coatings have excellent abrasion and impact resistance. Often used as a topcoat over epoxy coatings, they provide superior UV resistance and have great color and gloss retention.
Made with Viton® fluoroelastomer, use these coatings to create a flexible coating on rollers, heavy equipment, and anything else that’s exposed to corrosive chemicals or extreme temperatures.
Protect surfaces against chemical fumes and splashes. These coatings resist acids, alkalies, and inorganic salts. They’re highly durable and have excellent adhesion.
Put a temporary dull finish on glossy surfaces. Wipe to remove.
These coatings provide chemical, corrosion, and impact resistance on grit-blasted concrete and primed steel in immersion, underground, and waste-water treatment applications.
Spray these coatings on glass to create a clear, scratch-resistant surface that repels oil and water. They’re also known as oleophobic and hydrophobic coatings.
Use these coatings in kitchens, furnace areas, and ships on plastic, metal, wood, and masonry.
These provide the highest traction and impact resistance of our antislip coatings. Longer-lasting than antislip tape, these coatings contain grit to provide traction.
These coatings are often used in food-processing areas. They form a tacky film that provides long-lasting protection against rust and corrosion. Remove with an alkaline cleaner.
Protect metal parts from corrosion. Also known as rust-inhibiting film, these coatings can be removed with a simple degreaser or mineral spirits.
These flexible, slip-resistant silicone coatings resist chemicals, block UV light, and encapsulate lead paint. They withstand temperatures up to 320° F.
Cover sharp edges, corners, and weld seams with these thick epoxy coatings for protection against cuts and snags.
Apply these coatings directly to rust to prevent it from spreading and to stop new rust from forming. Often used on containers, trailers, and in marine restoration, they create a durable, impact-resistant surface that permanently stops rust.
Use these coatings on steel beams and pipes.
Designed for marine environments, these coatings stand up to harsh chemicals, such as sulfuric acid, citric acid, and diesel fuel. They have excellent abrasion, impact, and UV resistance, as well as low hardening temperatures.
Clear enough to read through, this UV-resistant potting compound allows optimal light transmission for use with LEDs, solar cells, and fiber optics.
No mixing required—these potting compounds come ready to apply.
Clear enough to read through, these UV-resistant potting compounds allow optimal light transmission for use with LEDs, solar cells, and fiber optics.
This potting compound is formulated for use in sensitive applications such as manufacturing semiconductors.
The strongest of the potting compounds, epoxies are rigid and wear resistant. They have excellent chemical and moisture resistance, withstand a wide range of temperatures, and provide excellent electrical insulation.
Urethanes withstand a wide range of temperatures and are the best choice for cold-temperature applications. They have excellent flexibility, good chemical and moisture resistance, and provide good electrical insulation.
Formulated to draw heat away from sensitive electronic components, these potting compounds have higher thermal conductivity than standard potting compounds.
Change the mix ratio of these heat-transfer potting compounds to achieve the right hardness for your application.
Seal freshly finished concrete to prevent it from drying too quickly during the curing process. These coatings also protect against mild chemicals, salts, soaps, and detergents.
Dry to the touch in only 3 minutes, use this coating to protect circuit boards from moisture without delaying your process for drying.
This thermally conductive coating keeps electrical components cool by dissipating heat.
Thinner than potting compounds, these rigid and wear-resistant coatings flow easily into small spaces between electrical components. Use them to secure and insulate hardware on printed circuit boards.
This coating is formulated for use in sensitive applications such as manufacturing semiconductors.
Clear enough to read through, this coating allows optimal light transmission for use with LEDs, solar cells, and fiber optics.
These coatings require an ultraviolet curing lamp to reach full strength.
Apply these wear-resistant coatings to wood to protect from scuffs, water, and oil damage.
Use these coatings on structural lumber, decking, and wood shingles.
These coatings reflect up to 60% of the sun's rays. They also restore and reinforce your roof by forming a water-resistant seal.
These silicone-based coatings renew leather and vinyl surfaces and protect against UV damage, dirt, and ozone.
Made from silicone, these coatings are more durable than acrylic coatings for roofs and have better resistance to pooling water. They reflect up to 90% of the sun's rays to reduce cooling costs.
Use these coatings to form a water-resistant layer to restore and reinforce your roof.
Also known as castor oil, use these to lubricate and preserve leather.
Protect clothing, furniture, and other fabric with these oil- and water-repellent coatings. Also known as oleophobic and hydrophobic coatings, they work into a fabric’s individual fibers to repel liquid and grease.
Spray this paint onto trees, logs, or cut wood—even in the rain—to create a bright mark that can be seen at a distance.
Highly abrasion resistant, use this paint in high-traffic areas. It’s good for marking traffic lanes, parking lots, and factory floors.
Hide blemishes and protrusions on shingles and flashing. This paint matches common roofing material.
Made of rubber and iron oxide, these sheets can be cut with scissors to create custom-shaped nonmetallic, nonmagnetic surface that magnets will stick to.
Mix with water to clear all traces of silicone from molds and molded parts.
To allow time to adjust and position parts, these epoxies remain workable for at least 90 minutes.
Epoxies are the strongest and most weather- and chemical-resistant structural adhesives. They work especially well on metals.
Toughened adhesives are blended with rubber particles for better impact resistance than standard epoxies. They form flexible, resilient bonds.
For quick repairs, these epoxies begin to harden in 6 minutes or less.
To simultaneously mix and dispense two-part adhesives, attach these mixer nozzles to a dual cartridge.