These rigid nozzles come with a dispensing tip and have threads on one end for connecting to a grease gun.

Penetrate gaskets, sealed bearings, and joints to deliver grease to precise locations.

These flexible nozzles have threads on both ends for connecting a grease gun to a dispensing tip.

Penetrate gaskets, sealed bearings, and joints to deliver grease to precise locations.

Dispense from grease guns into grease fittings and bare lubrication points.

Convert dispensing tips with male threads into quick-disconnect couplings.

These flexible extensions have a quick-disconnect fitting that snaps into your dispensing tip, so you can lubricate grease fittings that are hard to reach.

Mount holders in convenient locations to keep grease guns within reach.

Dispense grease with the highest-pressure-rated gun we offer.

Switch between high-pressure and low-pressure settings. Use high pressure to dispense thicker grease or to force grease through clogged fittings. Use low pressure for high-volume dispensing.

Ensure that only food-grade grease is used in controlled areas—this gun only works with compatible food-grade grease cartridges.

Be sure you’re using the right grease—this gun has a clear barrel for identification at a glance.

Use compressed air to dispense grease.

Prime these guns faster than standard grease guns and use them with just one hand.

Be sure you’re using the right grease—this gun has a clear barrel for identification at a glance.

Switch between high-pressure and low-pressure settings. Use high pressure to dispense thicker grease or to force grease through clogged fittings. Use low pressure for high-volume dispensing.

More portable than air-powered options, these guns operate on a rechargeable battery.

Dispense small amounts of grease with one of these compact guns.

Increase the pressure of your grease system when necessary to dispense thick grease and force grease through clogged fittings.

Kit contains lengths of hose, nozzles, connectors, and assembly pliers.

Kits contain lengths of hose, nozzles, valves, and caps.

Build a custom 1/2" system to deliver coolant, cutting oil, water, or air in any direction.

Use with Snap-Loc hose to assemble and disassemble components.

The most versatile of our machine-mount coolant nozzles, these adjust from a fine mist to a direct stream and can deliver coolant in any direction. Max. pressure is 100 psi.

For use in the highest pressure coolant lines, these nozzles are rated for at least 1,000 psi.

These nozzles handle coolant pressure up to 150 psi.

Press the lever to stop coolant mist and start a high-velocity air stream to remove dust and shavings.

These dispensers have a reservoir for recirculating coolant.

Deliver a small, controlled amount of coolant to a workpiece.

These dispensers have an opening for filling without removing the nozzle.

Deliver a mist of oil using shop air.

Use suction to remove old lubricant from gear boxes and transmissions.

Connect these dispensing stations to your bulk oil container to easily fill hand-held dispensers.