About Hazardous Location Environmental Ratings
More
About Brightness
More
About Light Appearance
More
Sanitary Articulating-Arm Machine Lights
Shine light on machinery and through the sight glass on tanks to inspect food, brewery, chemical, pharmaceutical, and bio-tech processing lines. Made of stainless steel, these lights withstand frequent washdowns with harsh cleaners and sanitizers. With a sealed lens, rounded edges, and polished surfaces, there aren’t any pits and crevices where bacteria and water can get trapped, so you can leave them mounted to machinery during cleaning. The lens will also stand up to bumps without cracking. Rated IP65 and NEMA 4X, these lights are protected against dust, dirt, corrosion, and light rinses.
Using built-in LEDs, these lights last longer, are more efficient, and generate less heat than other light technologies. Their cool light appearance is good for inspecting, and the 25° beam angle casts a narrow beam of light to maximize brightness on the inspection area. Use the articulating arm to aim light where it’s needed. Compared to gooseneck-arm lights, these lights hold their position better, especially around vibration.
These lights have a mechanical switch that when pushed once, will turn the light on for two minutes. When pushed twice, the light will turn on for 30 minutes. When the switch is pushed and held, the light will turn on until the switch is released.
Base | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Voltage | Arm Reach | Arm Adjustability | Head Dia. | Lg. | Wd. | Brightness, lumens | Light Appearance | Wattage | Head Material | Arm Material | Lens Material | Electrical Connection Type | Each | |
Built-In LED Bulbs | ||||||||||||||
Fastener Mount | ||||||||||||||
| 12V AC, 12V DC, 24V AC, 24V DC | 2 7/8" | Horizontal, Vertical | 2" | 1 1/4" | 1/2" | 1,000 | Cool (5,000K) | 12W | Stainless Steel | Stainless Steel | Glass | Hardwire | 0000000 | 0000000 |
| 120V AC, 240V AC | 2 7/8" | Horizontal, Vertical | 2" | 1 1/4" | 1/2" | 1,000 | Cool (5,000K) | 12W | Stainless Steel | Stainless Steel | Glass | Hardwire | 0000000 | 000000 |
Wet-Location Plug-In Portable String Lights
Hang a string of lights overhead to brighten wet jobsites. IP rated, these lights are sealed to keep out dust and moisture from washdowns, splashes, and sprays, even outdoors. They have multiple heads, so you can light large areas. Daisy chain multiple strings together to cover an even larger area.
Style C are built the toughest to withstand extreme weather. You can use them in temperatures as low as -40° F and plunge them 3 ft. under water, and they’ll still work. These lights not only carry one of the toughest IP ratings but also the top NEMA rating for outdoors and use near oil and coolant. They cast light at a 200° angle, illuminating a broad area.
Head | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Style | Overall Lg., ft. | Lg. | Wd. | No. of Bulb Heads | Bulb Spacing, ft. | Max. No. of Strings per Circuit | Brightness, lumens | Light Appearance | Outlet Included | Wire Gauge | Mount Type | Environmental Rating | Color | Each | |
Built-In LED | |||||||||||||||
| C | 50 | 11" | 2" | 3 | 16 | 24 | 4,200 | Neutral (4000K) | Yes | 14 | Suspension | IP67, NEMA 6P | Yellow | 0000000 | 0000000 |
Wet-Location Portable Lights
Plastic
Lens
Tempered
Glass Lens
Light up damp areas—these lights seal out moisture and humidity. They’ll even work in areas with frequent washdowns. Rated NEMA 4X, they withstand spraying liquid, resist corrosion, and keep out dust. Use them with medium-base, screw-in CFL (compact fluorescent), halogen, incandescent, and LED bulbs (sold separately).
PTFE plastic lenses are impact resistant.
Tempered glass lenses are more durable than plastic lenses. They have a zinc-plated steel guard to protect them.
Overall | Hook | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Lg. | Dia. | Cord Lg., ft. | Wattage | Color | Handle Material | Environmental Rating | Voltage | Electrical Connection Type | Wire Gauge | Material | Adjustability | Each | |
For Replaceable CFL, Halogen, Incandescent, LED Bulbs | |||||||||||||
With PTFE Plastic Lens | |||||||||||||
| 10" | 5" | 25 | 100W | Yellow | Plastic | NEMA 4X | 120V AC | Two-Prong Plug | 16 | Plastic | Swivel | 0000000 | 0000000 |
| 10" | 5" | 50 | 100W | Yellow | Plastic | NEMA 4X | 120V AC | Two-Prong Plug | 16 | Plastic | Swivel | 0000000 | 000000 |
With Tempered Glass Lens | |||||||||||||
| 18" | 4 3/4" | __ | 100W | Yellow | Rubber | NEMA 4X | 120V AC | Hardwire | 16 | Aluminum | Swivel | 0000000 | 000000 |
| 18" | 4 3/4" | 25 | 100W | Yellow | Rubber | NEMA 4X | 120V AC | Three-Prong Plug | 16 | Aluminum | Swivel | 0000000 | 000000 |
| 18" | 4 3/4" | 50 | 100W | Yellow | Rubber | NEMA 4X | 120V AC | Three-Prong Plug | 16 | Aluminum | Swivel | 0000000 | 000000 |
Explosion-Proof Freestanding Portable Floodlights
Safely light up large spaces where combustible gases and dust are normally present. Rated NEC Class I and II, these lights have a housing that contains any sparks or flames and seals out ignitable gases, vapors, and dust. They’re rated T5, an NEC hazardous location temperature classification. This means their surface temperature stays below 212° F to prevent them from reacting with nearby flammable substances. Made of lightweight, durable aluminum with a tempered glass lens, they withstand bumps and rough handling. They’re often used in chemical processing, refineries, and paint spray booths.
Unless noted, the plug and power supply on these lights are outdoor rated but are not explosion-proof rated. Electrical connections must be made outside the hazardous environment.
Style A can withstand extreme weather and washdowns. Rated NEMA 6P, you can plunge them 6 ft. underwater for 24 hrs. and they’ll still work. They’re easy to move around since they weigh just 10 lbs. Rubber bumpers prevent damage if they’re bumped or dropped. Those with an explosion-proof power supply have a sealed enclosure, so you can make safe electrical connections within the hazardous environment. Their power supply and plug are explosion-proof rated.
and Magnetic Mount,
Sold Separately)
Head | Overall | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Style | Ht. | Wd. | Ht. | Wd. | Dp. | Brightness, lumens | Light Appearance | Cord Lg., ft. | Electrical Connection Type | Outlet Included | Wire Gauge | Environmental Rating | Color | Each | |
Built-In LED with Standard Power Supply | |||||||||||||||
| A | 12 3/4" | 6 1/2" | 12 3/4" | 6 1/2" | 5 1/4" | 11,500 | Daylight (6000K) | 100 | 3-Prong Plug | No | 16 | NEC Class I Divisions 1, 2 Groups C, D NEC Class II Divisions 1, 2 Groups E, F, G NEMA 6P | Green | 0000000 | 000000000 |
Built-In LED with Explosion-Proof Power Supply | |||||||||||||||
| A | 12 3/4" | 6 1/2" | 12 3/4" | 6 1/2" | 5 1/4" | 11,500 | Daylight (6000K) | 100 | 3-Prong Plug | No | 16 | NEC Class I Divisions 1, 2 Groups C, D NEC Class II Divisions 1, 2 Groups E, F, G NEMA 6P | Green | 0000000 | 00000000 |
Add a magnet mount to attach these lights to most metal surfaces.
| Overall Lg. | Material | Color | Each | |
| 7 1/2" | Aluminum | Green | 00000000 | 0000000 |
Use a stand for a stable way to position the light higher than on the ground. The stand must be used with the magnet mount (sold separately).
| Overall Ht. | Base Dia. | Material | Color | Each | |
| 24" | 23" | Aluminum, Stainless Steel | Green | 00000000 | 0000000 |
Add a lens protector to these lights to shield the lens from scratching during abrasive blasting and other harsh tasks.
| Ht. | Wd. | Each | |
| 8 1/2" | 4 1/2" | 00000000 | 000000 |
Use a diffuser to disperse the light for broad coverage and minimal glare.
| Ht. | Wd. | Each | |
| 8 1/2" | 4 1/2" | 00000000 | 0000000 |
Explosion-Proof Portable Lights
Bring light to explosion-prone work areas. Rated NEC Class I, these lights are safe to use in areas with ignitable concentrations of flammable or combustible gases, vapors, and liquids. The housing of these lights contains fire and sparks, so they don’t ignite what’s in your environment. They’re often used in mines and underground drilling. All also meet NEMA 4X, meaning they withstand spraying liquid, resist corrosion, and keep out dust. Use the hook to hang them where you need them. These lights come with a standard three-prong plug, so electrical connections must be made outside of the hazardous environment. Alternatively, you can add a hazardous location plug.
Style A weigh less than 2 pounds, so you can hold them without your hand and arm tiring. Rated IP66, they’re dust tight and sealed against washdowns. A protective lens keeps the LEDs from getting damaged while diffusing light evenly. Their compact design fits in narrow and low-clearance spaces. Add a mounting clamp to clip to a pipe or other surface. The clamp swivels so you can aim the light where you need it.
Style B are rated NEC Class II for use in areas with combustible dust. The guard and hook are made of copper-free aluminum, which minimizes the chance of creating sparks if you drop or bump them. To stand up to frequent use, a tempered borosilicate glass lens protects the bulb and the handle is made of impact-resistant glass.
Hazardous location environmental ratings indicate where manufacturers have included safety features in products to facilitate their safe use in hazardous environments. Before selecting a product for a hazardous location, ensure it is rated for your environment.
Overall | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Style | Lg. | Dia. | Brightness, lumens | Light Appearance | Cord Lg., ft. | Outlet Included | Wire Gauge | Mount Type | Environmental Rating | Specifications Met | Color | Each | |
Built-In LED | |||||||||||||
| A | 7" | 5" | 1,700 | Cool (5000K) | 25 | No | 16 | Hook | NEC Class I Divisions 1, 2 Groups C, D NEC Class I Division 2 Groups A, B NEMA 4X IP66 | CSA-US Certified, CSA Certified | Black | 000000 | 0000000 |
For Replaceable LED | |||||||||||||
| B | 15 1/2" | 5 1/2" | 850 | Cool (5000K) | 50 | No | 16 | Hook | NEC Class I Divisions 1, 2 Groups C, D NEC Class II Divisions 1, 2 Groups F, G NEMA 4X | ETL Listed, C-ETL Listed | Blue/Silver | 000000 | 000000 |
| Grip Range | Dia. | Lg. | Material | Each | |
| 1"-1.875" | 1 1/2" | 6 1/2" | Aluminum | 000000 | 0000000 |
| Each | ||
| 000000 | 0000000 |
Explosion-Proof String Lights
Safe to use in areas with ignitable concentrations of flammable or combustible gases, vapors, liquids, and dust, these lights are rated NEC Class I, Class II, and Zone 1. Their housing contains fire and sparks, so they don’t ignite what’s in your environment. They’re often used in refineries, mines, and paint booths. Rated IP66, they’re also dust tight and sealed against sprays of water such as those used in washdowns. Since each head weighs less than 2 lbs., they’re easy to hang overhead. Each head has two straps for mounting on pipes, beams, or other surfaces. For more precise control over where the light is directed, add mounting clamps (sold separately). One clamp is required for each head.
These lights come with a standard three-prong plug, so electrical connections must be made outside of the hazardous environment. Alternatively, you can add a hazardous location plug.
Hazardous location environmental ratings indicate where manufacturers have included safety features in products to facilitate their safe use in hazardous environments. Before selecting a product for a hazardous location, ensure it is rated for your environment.
| Overall Lg., ft. | Head Dia. | No. of Bulb Heads | Bulb Spacing, ft. | Brightness, lumens | Light Appearance | Electrical Connection Type | Outlet Included | Wire Gauge | Mount Type | Environmental Rating | Includes | Each | |
Built-In LED | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 65 | 5" | 5 | 10 | 8,500 | Cool (5000K) | Three-Prong Plug | No | 12 | Suspension | NEC Class I Divisions 1, 2 Groups C, D NEC Class I Division 2 Groups A, B NEC Class II Divisions 1, 2 Groups E, F, G NEC Zone 1 Groups IIB, IIA NEMA 4X IP66 | Mounting Straps | 000000 | 000000000 |
| Grip Range | Dia. | Lg. | Material | Each | |
| 1"-1.875" | 1 1/2" | 6 1/2" | Aluminum | 000000 | 0000000 |
Sanitary Lights for Quick-Clamp Fittings
Attach these lights in one of the quick-clamp ports for a clear view of what's inside tanks, filters, and other closed containers used in brewery, pharmaceutical, and food-processing lines. Made with a 316 stainless steel body that is IP65 and NEMA 4X rated, they seal out dirt and dust, and won't corrode from frequent rinsing with harsh cleaners and sanitizers. With rounded edges, polished surfaces, and a fused lens, there aren’t any crevices for water and bacteria to hide in, so you can leave them mounted to machinery during cleaning. The lens doesn’t contain Bisphenol A (BPA), Bisphenol B (BPB), or BPA derivates (BPX), which are chemicals that could contaminate food and beverage applications. These lights also meet ASME BPE, which is a design standard for bioprocessing equipment that helps ensure purity and safety.
You’ll need to make sure your tank has at least two ports, since these lights require their own port. They mount to the port using quick-clamp clamps (not included), while leaving the other port for viewing. Mounting the light this way makes it easy to install and remove for cleaning.
With built-in LEDs, these lights last longer, are more efficient, and generate less heat than other light technologies. Their cool light appearance is good for viewing the contents of stainless steel containers, such as brew kettles and bioreactors. The narrow 25° beam angle concentrates light output through the lens and into the tank. Made of plastic, the lens resists shattering, high temperatures, corrosion, and chemicals. It’s reinforced around the edge with 304 stainless steel, so it won’t chip, crack, and break from the pressure of the quick-clamp fitting. Attach the lens to the body using the included set screws.
Lens | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Voltage | For Tube OD | Flange OD | End-to-End Lg. | Brightness, lumens | Light Appearance | Wattage | Body Material | Dia. | Material | Electrical Connection Type | Temp. Range, °F | Max. Pressure, psi | Specifications Met | Each | |
Built-In LED Bulbs | |||||||||||||||
Clamp-On Mount | |||||||||||||||
| 24V AC, 24V DC | 1" | 1.984" | 6 5/8" | 1,000 | Cool (5,000K) | 12W | 316 Stainless Steel | 1 1/4" | Plastic | Hardwire | -40° to 170° | 150 | ASME BPE | 000000 | 000000000 |
| 24V AC, 24V DC | 2" | 2.515" | 6 3/8" | 1,000 | Cool (5,000K) | 12W | 316 Stainless Steel | 1 1/4" | Plastic | Hardwire | -40° to 170° | 150 | ASME BPE | 000000 | 00000000 |
| 120V AC | 1" | 1.984" | 6 5/8" | 1,000 | Cool (5,000K) | 12W | 316 Stainless Steel | 1 1/4" | Plastic | Hardwire | -40° to 170° | 150 | ASME BPE | 000000 | 00000000 |
| 120V AC | 2" | 2.515" | 6 3/8" | 1,000 | Cool (5,000K) | 12W | 316 Stainless Steel | 1 1/4" | Plastic | Hardwire | -40° to 170° | 150 | ASME BPE | 000000 | 00000000 |
