Illuminate machines or monitor processes in environments that reach up to 210° F. These lights have a thick housing that acts as a heat sink to protect the LEDs and driver from overheating. Tough enough for CNC machines, both the housing and glass lens resist impact and vibration. They’re sealed against coolant, lubricant, and chips and shavings. IP rated, they withstand high-temperature washdown sprays and temporary submersion, so they can handle your wettest environments. All have FEP-covered wire leads that withstand heat and hardwire to your 24V DC power supply.

As chips fly and coolant splashes, these lights shine bright in tough machining conditions. Use them to light up your CNC machine for everything from tool swaps to tune-ups. A thick, tempered glass lens shields them from damage. Rated IP67, these lights are also sealed for protection against dust and temporary submersion, so they’ll hold up in wet and dirty environments.

Rocker Switches—If you’d rather place a switch in a different spot, add a rocker switch (sold separately).

More than twice as wide as strip lights, these lights brighten a broader area—ideal for large CNC machines. The extra coverage reduces shadows during maintenance and tool changeovers. A tempered glass lens shields against flying chips and coolant splashes to keep these lights shining in tough conditions.

All meet IP67 for protection against dust and temporary submersion, so they hold up in wet and dirty environments.

Adjustable Mounting Brackets—Add adjustable mounting brackets to angle these lights.

Rocker Switches—Add rocker switches in easy-to-reach spots to manually turn lights on and off.

Brighten electrical cabinets, small server closets, valve control enclosures, and other tight spaces. Tap the lens of these lights to turn them on, then tap again to dim or switch them off—even while wearing gloves. Rated IP69K, their polycarbonate housing and lens are sealed to keep out dust and high-pressure, high-temperature washdowns, so they’ll still work in wet conditions.

Mount these lights with the included hook and loop fasteners or with screws (not included).

Know your machine’s status at a glance—green for running, red for stopped, yellow for standby. Using your programmable logic controller (PLC), you can adjust the brightness of these lights and mix red, green, and blue light to achieve thousands of colors. They shine a bright white by default to illuminate your production line.

With a smooth, shatterproof lens, these lights have no crevices where debris can accumulate. Their stainless steel connectors, plastic lens, and mounting brackets resist acids, alkalis, and other chemicals commonly used in food environment washdowns. All are IP rated to seal out dust and withstand high-pressure, high-temperature sprays required for sanitizing.

Use the included hardware to install them in your machine. They require a 5-pole M12 socket (sold separately) to connect to your PLC.

Mount these lights into an opening in your CNC machine. They sit flush with the surface for a streamlined look, and they free up space for setting up or maintaining your machine. A tempered glass lens protects them from coolants and lubricants, as well as impacts from chips and shavings. Rated IP67, these lights are sealed to protect them from dust and temporary submersion in water. They’re also rated IP69K for protection from high-temperature sprays from washdowns. All require a cord (sold separately) to connect to your 24V DC power supply. 3-Pole Micro M12 plugs are compatible with cords that have 4 poles.