These lights cast a narrower beam than other gooseneck-arm machine lights. Reposition them faster and more easily than articulating-arm lights. They have a durable glass lens that's sealed to keep out fluids, chips, and shavings, so they can be mounted directly inside machines. With built-in LEDs, these lights last longer, are more efficient, and generate less heat than other light technologies. They produce a cool or daylight appearance that highlights white/blue tones, which is good for inspecting. IP67 lights withstand temporary submersion in a maximum of one meter of water for up to 30 minutes, so they are built tougher than needed for machine environments.

Power supplies, also known as transformers, convert your facility's 120 or 240 AC voltage into 24V DC voltage.

Pivot the head to cast a narrow beam of light to exactly where it's needed. Mount these lights directly inside machines—they have a heat- and chemical-resistant glass lens that’s sealed to keep out fluids, chips, and shavings. They’re rated IP67 to withstand temporary submersion in a maximum of one meter of water for up to 30 minutes, so they are built tougher than needed for machine environments. These lights have built-in LEDs that last longer, are more efficient, and generate less heat than other light technologies. They produce a cool light appearance that highlights white/blue tones, which is good for inspecting.

Power supplies, also known as transformers, convert your facility's 120 or 240 AC voltage into 24 DC voltage. They cannot be sold to California or Vermont due to local energy efficiency requirements.

Faster and easier to reposition than articulating-arm lights, these gooseneck-arm lights attach to your workspace for additional lighting. They're more rugged than office desk lamps. All are furnished with LEDs that last longer, are more efficient, and generate less heat than other light technologies. They produce a warm light appearance that casts a yellow tone similar to incandescent lights.

Keep excess cords out of your way—the reel locks the cord at any length and retracts it when not in use. All of these lights have a hook for hanging when you need both hands for other work.

Styles B and C have a swiveling hook, so you can aim light where you need it. Fold the hook away when not in use. They also have a magnet in back for mounting to metal. Ideal for inspecting, their daylight appearance highlights white and blue tones. A plastic lens resists impact to protect the LEDs. Mount the reel to your wall or ceiling using the included hardware. Style B can double as an extension cord for plugging in a power tool or other device.

Style D have a hook on the top and the bottom, so you can hang the light horizontally or vertically. Fold both hooks away when not in use. You can also mount these lights to metal with the removable magnet in back. Their daylight appearance highlights white and blue tones, so they’re ideal for inspecting. To protect the LEDs, they have an impact-resistant plastic lens. They come with hardware for mounting to your wall or ceiling.

Pop these lights on magnetic surfaces to brighten wet spaces. Rated NEMA 6 and ETL listed, you can splash, spray, or dunk them in water, and they’ll keep working. Strong magnets on the back keep them from sliding down or shaking loose. You can also secure them with a chain (not included) from the eyebolt at the top.

Style A and D have a handle for carrying the lights to your worksite.

Lights with an outlet included can be connected together to avoid running separate extension cords. Link up to 10 lights on one circuit. For increased spacing between lights, you can add an extension cord between them.

Hang these lights where you need them on the job site.

Style A have a magnet on the back to attach these lights to most metal surfaces. The hook swivels, so you can aim the light where you need it. When you don’t need the hook, fold it away. These lights have an impact-resistant plastic lens to protect the LEDs. Some include an outlet to plug in a power tool or other device without running another extension cord.

Style C have two hooks that swivel, so you can also hang them horizontally by putting both hooks on the same surface. You can attach them with the magnet to most metal surfaces. They have an impact-resistant plastic lens to protect the LEDs.

Point light where it’s needed—even in wet areas. These lights are sealed against splashing and dripping water. You won't need an outlet nearby because they're cordless, so you can bring them wherever you're working. They have a hook, a magnet at the base, or both, so you can attach them to nearby surfaces.

Styles A and B show colors more accurately than standard LEDs. Use them where color identification is critical, such as paint inspection and wiring. They’re durable enough to fall from 6 ft. and still work. Style B have a UV light that illuminates fluorescent dyes to track down leaks and spot surface contaminants more easily than with white light.

Styles C and D have a light on the end, so they can also be used as a flashlight. Their head swivels in addition to pivoting. Style C are dimmable.

Style E are small enough to fit in the palm of your hand, so it’s a cinch to carry and store them. They’re durable enough to fall from 6 ft. and still work. Choose from two lighting modes based on your situation: a floodlight for close-up tasks or a spotlight for long distances. They show colors more accurately than standard LEDs, so they’re great when color identification is critical, such as paint inspection and wiring. Their lens resists chemicals.

Styles F and G have a clip like a carabiner built into the base to secure them to racks, ladders, or other surfaces. Their head swivels in addition to pivoting.

Aim light where it’s needed most in areas that don't have an electrical outlet.

Lights with rechargeable batteries include a USB charging cord.

Style A swivel like a joystick to aim light. They also have a magnet on the back, so you can pop them on most metal surfaces.

Style B have a large head to cast even light with minimal glare and shadows. You can pivot the head up and down and rotate the head side to side to aim light. The stand has magnets for attaching these lights to most metal surfaces. A swivel hook unfolds from the back of the lights, so you can hang them.

Style C have a light on the end, so they can be used as a flashlight. Use the flashlight when you need a narrow beam and unfold the head to cast light widely. For hands-free use, they have a magnet and a hook on the base.

Style E help you find fluid leaks and detect flaws and contaminants on a surface—they have an ultraviolet light in addition to a white light. Their white light helps you distinguish similar hues. They show color more accurately than most LEDs. Use them where color identification is critical, such as paint inspection and wiring. The base is magnetic, so you can attach them to most metal surfaces, and a hook folds out for hanging. Designed tough, they can withstand a drop from up to 6 feet without breaking.

Style F have a hook that swivels and a magnet on the base to give you a variety of options when mounting them.

Lights tested against ANSI/PLATO FL 1 standards confirm the accuracy of performance attributes such as beam distance, impact resistance, and battery life.

Lights that cannot be sold to Canada are restricted due to energy efficiency requirements.

Bring light to areas that don't have electrical power service. These lights have an impact-resistant plastic lens to protect their LEDs. No need to swap out disposable batteries—just charge these flashlights up and they’re ready to go.

Style A have a swiveling hook and magnetic back for flexible mounting options. You can fold away the hook when not in use. They cast a neutral light that’s often found in workspaces.

Power these lights with the same battery as your other cordless tools. They run on a Milwaukee M18 battery (sold separately) to light up work where there’s no outlet. Their head pivots to aim light where you need it, and they’re small enough to easily move from workspace to workspace. Ideal for tough jobsites, their plastic lens resists impact. You can use them outdoors and in other damp areas—rated IP54, they’re sealed against splashing liquid and humidity. They’ll also work in dusty conditions.

Style B can clamp onto 1”-3” dia. pipes. They also have a magnetic base to mount to most metal surfaces. Their head pivots horizontally and vertically.

Note: Battery life depends on the size of your battery.

Because these lights are compatible with DeWalt rechargeable batteries, you can keep one type of cordless tool battery on hand. Their head pivots to aim light where it's needed in areas that don't have electrical power service. Hang them by the hook or stand them up for hands-free illumination. To protect the LEDs, their plastic lens resists impact.

Style A have a head that both pivots and rotates, so they’ll point light at any angle. For flexible mounting, they have a hanging hook, belt hook, and kickstand. You can also stick their magnetic back to metal surfaces.

Note: Battery life depends on the size of your battery.

From pipes to pallet racks to control panels—these lights clamp onto almost anything and swivel to direct light just where you need it. They have a magnetic base to attach to most metal surfaces and can also be used as freestanding lights. You won’t be tethered to an outlet or extension cord, since they use battery power. A battery life indicator tells you how much charge you have left. Even while charging, you can still use the light, so your job isn’t on hold. Fold the head down to take up less storage space.

IP rated, these lights are sealed to keep out humidity and dripping and splashing liquids. They’re also tested against ANSI/PLATO FL 1 standards to confirm the accuracy of performance attributes such as beam distance, impact resistance, and battery life.

Style A are also IP rated for dust, so you can use them when sanding, grinding, and in other messy applications. They have a USB charger port for powering other things such as phones and earbuds. Style A with a hook can also be hung.

Style B have a maximum grip of 5”—wide enough to clamp on the side of a pallet or a support beam. Their grips are rubber-coated to prevent scratching surfaces. You’ll have two beam options: a spotlight for longer distances and a floodlight for close-up tasks; adjust both with high, medium, and low settings. With a gasket-sealed lens that’s made of glass, these lights resist solvents and oil.

Splashes and drips are no problem for these lights. They don’t need an outlet, so you can bring them wherever you’re working. With a swivel hook and a magnet, you can attach them where convenient and aim light on your task. IP rated, they’re sealed to keep water from working its way in and causing failure. Their light mimics natural daylight to give you a crisp, clear light that’s good for inspecting.

Style A have magnets at both ends and on the back of the handle. Pop them onto magnetic surfaces or stick the magnetic hook on to hang them where they work best for you. The handle has an octagonal collar, so you can set them on their side without them rolling away.

Style B come with removable mounting attachments: a hook for hanging that also doubles as a kickstand when you fold it down and a magnetic clip for attaching them to most metal surfaces. Use the light on the top as a flashlight when all you need is a narrow beam.

Style C and D have a magnet on the kickstand. You can attach them to a metal surface and adjust the angle of the light. Fold the hook into the back when you’re not using it. Style D can shine like a flashlight when you need to peer into narrow spaces.

Style E have a magnet embedded in the hook. Since the hook folds, you can use it to tilt the light toward your task. Use the light on the end as a flashlight when all you need is a narrow beam. A battery life indicator lets you know when it’s time to charge these lights. They’re tested against ANSI/PLATO FL 1 standards to confirm the accuracy of performance attributes such as beam distance, impact resistance, and battery life.

Aim light where you need it—even in explosion-prone spaces—by raising, lowering, and tilting these lights on their tripod. Rated NEC Classes I, II, III, and Zone 0, they’re safe to use near ignitable concentrations of flammable or combustible gas, dust, or fibers. Intrinsically safe, they’re designed not to create enough heat or sparks to trigger an explosion.

They’re durable enough to fall from 6 ft. and still work. The polycarbonate lens resists impact, and the sturdy steel body has rubber cushioning on the edges. Rated IP67, they’re completely dust tight and can be submerged in water and still work. They’re also tested against ANSI/PLATO FL 1 standards to confirm the accuracy of performance attributes such as beam distance, impact resistance, and battery life.

Set these cordless lights up on the included tripod or mount them using the hook on the back or the magnet on the base. You can set these lights up quickly and move them elsewhere at a moment’s notice. The hook makes it easy to carry them around your jobsite and the carrying case fits both the light and the tripod.

Flood hazardous areas with light—these lights are intrinsically safe, meaning they can’t cause an explosion or fire. Rated NEC Class I, II, III, and Zone 0, they’re safe to use in areas with ignitable concentrations of flammable or combustible gases, dust, and fibers. They’re often used in refineries, mines, and paint booths. Pivot their head up and down to direct light where you need it most. These lights are rechargeable, compact, and include a carrying case for easy transport to jobsites without power.

They’re durable enough to fall from 6 ft. and still work. The edges of the metal body are cushioned with rubber, and the lens is impact-resistant polycarbonate. Rated IP67, they are sealed against dust and water. You can drop them in water, and they’ll keep working. These lights are tested against ANSI/PLATO FL 1 standards to confirm the accuracy of performance attributes such as beam distance, impact resistance, and battery life.

Mount them using the extendable swivel hook on the back or the magnet in the base. The hook also functions as a carrying handle. Add a tripod if there’s nowhere to mount the light and you need to position it higher than on the ground.

Brighten remote areas, even if they’re damp or rainy. These floodlights are IP rated to keep out humidity and dripping, splashing, and falling liquids. Lightweight, you can move them elsewhere at a moment’s notice.

Style B are made with tough jobsites in mind. For impact resistance, they’re cushioned with rubber at the edges and have a tempered-glass lens. You can drop them from up to 6 feet without damage. Rated IP67, they’re dust-tight and will still work if temporarily submerged under water. Adjust them to any angle to aim light exactly where you need it. To mount, hang them up with the extendable hook or stick the magnetic base to a metal surface. If there’s no surface to mount them on, add a tripod (sold separately).

Style C are the best at showing slight color differences. Originally used by evidence technicians, they’re great for inspecting paint or similarly colored wires. Light up something nearby or far away by adjusting the diffuser lens from a flood beam to a spot beam. Rated IP07, these floodlights will still work even if they’re temporarily submerged. They also have the best battery life, offering up to a full day of lighting. For unlimited operation, use the included adapters to plug them into a standard outlet or a 12V power source, such as a truck. They also come with a remote that lets you control them from up to 20 feet away. To mount, hang them like a lantern with the loop on top or stick them to a metal surface with the magnetic base. If you don’t have a surface to work with, add a tripod (sold separately).

Floodlights tested against ANSI/PLATO FL 1 standards confirm the accuracy of performance attributes such as beam distance, impact resistance, and battery life.

Brighten remote areas using the same battery as your other cordless Milwaukee tools. Since these lights run on a Milwaukee M18 battery (sold separately), you don’t need to have an outlet nearby. Their LEDs are protected by an impact-resistant polycarbonate lens.

Styles D and E have heads that tilt to direct light where you need it. You can mount them to the ceiling or a wall thanks to fastener mounts on the bottom. They’ll also run on AC power with an extension cord (not included). Style E send light in all directions when you pivot the panels all the way back. You can also mount them using the built-in hook or magnetic base.

All lights are protected from dirty, dusty conditions. IP54-rated lights are sealed against splashing liquid and humidity.

Bring light to remote, wet areas. These floodlights are IP rated to handle humidity and dripping, splashing, and falling liquids. Adjust their tripod up and down to direct light as far as you need. They’re also quick to set up and move elsewhere at a moment’s notice.

Style B have three LED panels that adjust up and down and side to side to aim light where you need it. The head detaches for use as a lantern. Fold out the hook to hang it up, or stick the magnetic base to a metal surface.

Style D are made with tough jobsites in mind. For impact resistance, the head is cushioned with rubber at the edges and has a tempered-glass lens. It’s also detachable and has been drop tested from 6 feet. Hang it from a pipe or rail with the steel-reinforced, extendable hook, or stick its magnetic base to a metal surface. The head adjusts to any angle to aim light exactly where you need it. To move these floodlights around, either carry them by the hook or fold them up and put them in their carrying case.

Floodlights tested against ANSI/PLATO FL 1 standards confirm the accuracy of performance attributes such as beam distance, impact resistance, and battery life.

Floodlights with a vehicle plug or wire leads can be operated as long as needed using an external power source, such as your truck’s battery. Vehicle plugs fit into a standard outlet or a 12V DC power source using the included adapters. Floodlights that cannot be sold to Canada are restricted due to energy efficiency requirements.

Brighten enclosures and small spaces like closets and drawers—no hardwiring or outlets needed. Powered by a rechargeable battery, these lights are easy to install and help save on maintenance costs. Stick the adhesive-backed metal mounting plates to any surface where you need light. The light snaps onto the plates—and off when it’s time for charging.

A motion sensor turns these lights on when you open the door or wave your hand. Choose between two modes for turning off the light: a two-minute timer or a hand wave. In timer mode, the light also turns off when the door is closed.

Improve visibility inside enclosures and control cabinets so it’s easier to trace wires, swap relays, check connections, and more. These lights have an impact-resistant plastic lens that protects the LEDs. Each light has a 2-pin connector on both ends, so you can plug in a power cord or a connecting cord (both sold separately) to link multiple lights together in a large cabinet. You can also make your own power cord or connecting cord using screw terminal connectors (sold separately) and your own 16/2 cable.

Lights with a motion sensor turn on automatically when the door opens—no wiring to a door switch necessary. Position the sensor so it has a clear view of the door.

If you’d prefer to control the lights with a door switch, choose lights with no switch or lights with a rocker switch. Those with a rocker switch can be left in the ‘on’ position for use with a door switch, or toggled manually to control the light.

Lights with a button switch only operate manually.

When linked together, lights with a motion sensor or switch turn on and off independently. Lights with no switch turn on and off together when linked.

Lights with a magnetic mount cling to most metal panels and can be repositioned and removed. Pop them off to use them as a portable light inside your enclosure—just leave some slack in the cable to move them around.

Light that moves with your gaze, not your grip. These headlamps provide hands-free illumination. IP rated, they’re sealed to keep out splashing and dripping water.

Headlamps with a rubber grip, rubber strap, or hard hat clips stay in place on hard hats.

Rechargeable headlamps that are compatible with disposable batteries allow you to swap in three AAA disposable batteries instead of waiting for a charge.

Adjustable-focus headlamps have a spot-to-flood beam that narrows and broadens as you twist the head.

Headlamps with a spot beam cast light with a bright center for long distances.

Removable magnetic lights double as task lights—just pop them out and stick them to any metal surface.

Light up work even when your visor is up. These headlamps come with three attachments that fit with anything from your hard hat to your baseball cap. A strong magnet connects the light to the attachments, so swap between them in a snap. When you need close-up illumination, detach the light and hold it as a task light.

Rated IP54, these headlamps are sealed against dust and splashing liquids. They’re tested against ANSI/PLATO FL 1 standards to confirm the accuracy of performance attributes such as brightness, battery life, and beam distance. On the high beam, these lamps will illuminate the length of a football field.

Twist the head to adjust from a narrow spotlight to a wide floodlight. These headlamps are rechargeable and include a spare rechargeable battery. If you aren’t near an outlet or you can’t wait for a recharge, they’ll also run on three disposable AAA batteries.