From pipes to pallet racks to control panels—these lights clamp onto almost anything and swivel to direct light just where you need it. They have a magnetic base to attach to most metal surfaces and can also be used as freestanding lights. You won’t be tethered to an outlet or extension cord, since they use battery power. A battery life indicator tells you how much charge you have left. Even while charging, you can still use the light, so your job isn’t on hold. Fold the head down to take up less storage space.

IP rated, these lights are sealed to keep out humidity and dripping and splashing liquids. They’re also tested against ANSI/PLATO FL 1 standards to confirm the accuracy of performance attributes such as beam distance, impact resistance, and battery life.

Style A are also IP rated for dust, so you can use them when sanding, grinding, and in other messy applications. They have a USB charger port for powering other things such as phones and earbuds. Style A with a hook can also be hung.

Style B have a maximum grip of 5”—wide enough to clamp on the side of a pallet or a support beam. Their grips are rubber-coated to prevent scratching surfaces. You’ll have two beam options: a spotlight for longer distances and a floodlight for close-up tasks; adjust both with high, medium, and low settings. With a gasket-sealed lens that’s made of glass, these lights resist solvents and oil.

Splashes and drips are no problem for these lights. They don’t need an outlet, so you can bring them wherever you’re working. With a swivel hook and a magnet, you can attach them where convenient and aim light on your task. IP rated, they’re sealed to keep water from working its way in and causing failure. Their light mimics natural daylight to give you a crisp, clear light that’s good for inspecting.

Style E have a magnet embedded in the hook. Since the hook folds, you can use it to tilt the light toward your task. Use the light on the end as a flashlight when all you need is a narrow beam. A battery life indicator lets you know when it’s time to charge these lights. They’re tested against ANSI/PLATO FL 1 standards to confirm the accuracy of performance attributes such as beam distance, impact resistance, and battery life.

Aim light where you need it—even in explosion-prone spaces—by raising, lowering, and tilting these lights on their tripod. Rated NEC Classes I, II, III, and Zone 0, they’re safe to use near ignitable concentrations of flammable or combustible gas, dust, or fibers. Intrinsically safe, they’re designed not to create enough heat or sparks to trigger an explosion.

They’re durable enough to fall from 6 ft. and still work. The polycarbonate lens resists impact, and the sturdy steel body has rubber cushioning on the edges. Rated IP67, they’re completely dust tight and can be submerged in water and still work. They’re also tested against ANSI/PLATO FL 1 standards to confirm the accuracy of performance attributes such as beam distance, impact resistance, and battery life.

Set these cordless lights up on the included tripod or mount them using the hook on the back or the magnet on the base. You can set these lights up quickly and move them elsewhere at a moment’s notice. The hook makes it easy to carry them around your jobsite and the carrying case fits both the light and the tripod.

Flood hazardous areas with light—these lights are intrinsically safe, meaning they can’t cause an explosion or fire. Rated NEC Class I, II, III, and Zone 0, they’re safe to use in areas with ignitable concentrations of flammable or combustible gases, dust, and fibers. They’re often used in refineries, mines, and paint booths. Pivot their head up and down to direct light where you need it most. These lights are rechargeable, compact, and include a carrying case for easy transport to jobsites without power.

They’re durable enough to fall from 6 ft. and still work. The edges of the metal body are cushioned with rubber, and the lens is impact-resistant polycarbonate. Rated IP67, they are sealed against dust and water. You can drop them in water, and they’ll keep working. These lights are tested against ANSI/PLATO FL 1 standards to confirm the accuracy of performance attributes such as beam distance, impact resistance, and battery life.

Mount them using the extendable swivel hook on the back or the magnet in the base. The hook also functions as a carrying handle. Add a tripod if there’s nowhere to mount the light and you need to position it higher than on the ground.

Brighten remote areas, even if they’re damp or rainy. These floodlights are IP rated to keep out humidity and dripping, splashing, and falling liquids. Lightweight, you can move them elsewhere at a moment’s notice.

Style A can be hung or propped up like a picture frame with their handle. Adjust from a focused spot beam to a wide flood beam by twisting the light head. Rated IP54, these floodlights also seal out dusty conditions. Their high-capacity battery lets you plug your phone or other device in to charge while you’re working. And when you plug these lights in to charge, they’ll still produce light. The battery life indicator will let you know when to recharge.

Style B are made with tough jobsites in mind. For impact resistance, they’re cushioned with rubber at the edges and have a tempered-glass lens. You can drop them from up to 6 feet without damage. Rated IP67, they’re dust-tight and will still work if temporarily submerged under water. Adjust them to any angle to aim light exactly where you need it. To mount, hang them up with the extendable hook or stick the magnetic base to a metal surface. If there’s no surface to mount them on, add a tripod (sold separately).

Floodlights tested against ANSI/PLATO FL 1 standards confirm the accuracy of performance attributes such as beam distance, impact resistance, and battery life.

Bring light to remote, wet areas. These floodlights are IP rated to handle humidity and dripping, splashing, and falling liquids. Adjust their tripod up and down to direct light as far as you need. They’re also quick to set up and move elsewhere at a moment’s notice.

Style A can be used as a freestanding lantern when you lower the tripod, or as a flashlight when you fully collapse the legs. When extended, the head pivots to aim light where you need it.

Style B have three LED panels that adjust up and down and side to side to aim light where you need it. The head detaches for use as a lantern. Fold out the hook to hang it up, or stick the magnetic base to a metal surface.

Style D are made with tough jobsites in mind. For impact resistance, the head is cushioned with rubber at the edges and has a tempered-glass lens. It’s also detachable and has been drop tested from 6 feet. Hang it from a pipe or rail with the steel-reinforced, extendable hook, or stick its magnetic base to a metal surface. The head adjusts to any angle to aim light exactly where you need it. To move these floodlights around, either carry them by the hook or fold them up and put them in their carrying case.

Floodlights tested against ANSI/PLATO FL 1 standards confirm the accuracy of performance attributes such as beam distance, impact resistance, and battery life.

Floodlights with a vehicle plug or wire leads can be operated as long as needed using an external power source, such as your truck’s battery. Vehicle plugs fit into a standard outlet or a 12V DC power source using the included adapters. Floodlights that cannot be sold to Canada are restricted due to energy efficiency requirements.

Provide 360° of lighting with these lanterns. They have a daylight appearance that highlights white/blue tones, which is good for inspecting.

Rechargeable Style A lanterns have a spot for 3 AA backup batteries as well. When the charge is under 10%, they’ll switch to the backup batteries to preserve runtime. You can lock these lanterns out to prevent accidental activation. Charge your phone and other devices with the USB port.

Style B have a light on the base, so they work as a flashlight too. You can even use them in place of a road flare—they have a flashing hazard light. Charge your phone and other devices with the USB power bank.

IP04-rated lanterns keep out dripping, splashing, and falling liquids, as well as humidity.

Lanterns that meet ANSI/PLATO FL 1 are tested to confirm the accuracy of performance attributes such as beam distance, impact resistance, and battery life.

Light up enclosures and other spaces without wiring. These lights even work outdoors—rated IP07, they can be temporarily submerged, so rain is no problem. They also have a rigid exterior that resists shocks. With a 17-hour battery life, they’ll give you years of light if used intermittently. After you remove them, they won’t leave a sticky residue. These lights meet ANSI/PLATO FL 1, so they’ve been tested for light output, impact resistance, and battery life.

Clip these headlamps right into a mount on your tactical or rescue helmet. You can also clip them onto your gear’s MOLLE strap. These headlamps all have multiple LED color options for different scenarios. Use the red or blue beam in low-light environments to preserve your night vision. The blue beam lets you see more details and color differences than the red beam—you can even read. The green beam shows more contrast than red and blue beams, but it can interfere with your ability to see in dark conditions. Meeting ANSI/Plato F1, these lights have been tested for light output, impact resistance, and run time.

Style A are best for close-up tasks and inspection work—they produce a flood beam with an even spread of light. Direct the light where you need it with the bendable arm. You can program the order the beam colors appear with each push of the button based on your preference. Rated IP04, these headlamps are sealed to keep out dripping, splashing, and falling liquids, as well as humidity. They include common helmet mount adapters such as ARC, M-LOK, MICH, Picatinny, and ABR.

Style B are best for lighting up long distances where water is a concern. Our most water-resistant option, they’re rated IP08 to handle prolonged submersion. Their spot beam has a bright center to illuminate faraway objects. When wearing night-vision goggles, switch these headlamps to infrared light to see clear, crisp images in dim light or pitch black. You can also program the order that the beam colors appear with each push of a button based on your preference. Bend the arm to direct light where you need it. To keep them from turning on accidentally, they have a digital lockout option. These headlamps include common helmet mount adapters such as ARC, M-LOK, MICH, Picatinny, and ABR.

Style C project light the farthest of these headlamps. Tilt them up to 90° to point light where you need it. To view clear images through night-vision goggles in dim light or pitch black, switch them to infrared light. A digital lockout option keeps the beam from turning on accidentally. IP07-rated for temporary submersion, they’ll keep working if you drop them in water. These headlamps are compatible with NVG mounts and include a strap if you want to wear them without a helmet.

Light that moves with your gaze, not your grip. These headlamps provide hands-free illumination. IP rated, they’re sealed to keep out splashing and dripping water.

Headlamps with a rubber grip, rubber strap, or hard hat clips stay in place on hard hats.

Rechargeable headlamps that are compatible with disposable batteries allow you to swap in three AAA disposable batteries instead of waiting for a charge.

Adjustable-focus headlamps have a spot-to-flood beam that narrows and broadens as you twist the head.

Headlamps with a spot beam cast light with a bright center for long distances. Headlamps with a flood beam cast uniform light for close-up tasks and inspection work. Headlamps with a spot/flood beam can shine both at the same time for maximum brightness.

Headlamps with a safety light also shine from the back of your head, so others can see you from all sides.

Choose headlamps with voice command to change the settings on your headlamp without lifting a finger.

Removable magnetic lights double as task lights—just pop them out and stick them to any metal surface.

Light up work while staying visible in high-risk areas. These headlamps have LEDs on the head band so forklift and truck drivers can see you. You can set the lights to shine steady or flash. These headlamps are tested against ANSI/Plato FL 1 standards to confirm the accuracy of performance attributes such as beam distance, impact resistance, and battery life.

Styles A and B have lights all around the head band for 360° visibility. You can turn the front and band light on separately or simultaneously. Battery life is measured when all lights are on. They include a rubber strap you can wrap around a hard hat—no hard hat clips required. These headlamps are rated for temporary submersion in water.

Style A have a memory function that defaults to your preferred light combination when you first turn them on.

Style B headlamps will last a full shift. Quickly swap out their disposable batteries—no need to wait for a charge. Their reflective band keeps you visible to vehicles even when the light is turned off.

Style C are a lower cost alternative that has a red light in back so people can see you when it is dark. However, they don’t have lights all around the head band. The front light has a dial to dim the light anywhere from high to low for precise lighting control. They are a good choice for wearing on your head rather than on a hard hat. Rated IP54, they’re sealed against dust and splashing water.

Headlamps with a spot beam have a bright center for lighting up long distances. Headlamps with a flood beam cast a uniform spread of light that’s good for close-up tasks and inspection work.

On headlamps with color options, the red beam lets you see in low light without disrupting your night vision. The green beam shows more contrast than the red beam, but it can interfere with your ability to see in dark conditions.

Brighten things in your periphery without having to turn your head. These headlamps cast a beam that’s two to three times wider than traditional headlamps. Rated IP05, they’re sealed to resist splashes and dripping water. Use the included clips to secure the elastic strap to your hard hat.

Style B have a separate spotlight, so you can see farther away.

Light up work without risking an explosion. NEC rated, these headlamps are safe to use in areas with ignitable concentrations of flammable or combustible gases, vapors, and liquids. Swap the elastic strap with the included rubber strap to wear them around a hard hat—no clips required. To attach them to a welding helmet, use the included snap-together fastener. IP rated, you can drop them in water and they’ll still work. These headlamps are tested against ANSI/PLATO FL 1 standards to confirm the accuracy of performance attributes such as beam distance, impact resistance, and battery life.

Intrinsically safe headlamps cannot cause an explosion, so they're a better choice where hazardous material is present in normal operating conditions.

Hazardous location environmental ratings indicate where manufacturers have included safety features in products to facilitate their safe use in hazardous environments. Before selecting a product for a hazardous location, ensure it is rated for your environment.

Light up work even when your visor is up. These headlamps come with three attachments that fit with anything from your hard hat to your baseball cap. A strong magnet connects the light to the attachments, so swap between them in a snap. When you need close-up illumination, detach the light and hold it as a task light.

Rated IP54, these headlamps are sealed against dust and splashing liquids. They’re tested against ANSI/PLATO FL 1 standards to confirm the accuracy of performance attributes such as brightness, battery life, and beam distance. On the high beam, these lamps will illuminate the length of a football field.

Twist the head to adjust from a narrow spotlight to a wide floodlight. These headlamps are rechargeable and include a spare rechargeable battery. If you aren’t near an outlet or you can’t wait for a recharge, they’ll also run on three disposable AAA batteries.