Mount these lights into a recessed opening on your machine—they sit flush against the surface for a streamlined appearance.

These classic-style machine lights have a reflector to distribute light more evenly than strip machine lights.

Update conventional fluorescent tubular lights with newer LED technology. These lights are furnished with brackets that have the same hole pattern as most older lights for easy changeover.

These low-profile lights stay out of sight when mounted under a cabinet. Use them to free up space on your work surface.

These lights cast a narrower beam than other gooseneck-arm machine lights. Reposition them faster and more easily than articulating-arm lights.

Gooseneck arms can be repositioned faster and more easily than articulating arms.

These lights cast a narrow beam of light. With a gooseneck arm, they are faster and easier to reposition than articulating-arm lights.

These lights have a longer reach and hold their position better than gooseneck-arm lights, especially around vibration.

Hang a string of lights overhead to brighten wet jobsites. IP rated, these lights are sealed to keep out dust and moisture from washdowns, splashes, and sprays, even outdoors.

Pop these lights on magnetic surfaces to brighten wet spaces. Rated NEMA 6 and ETL listed, you can splash, spray, or dunk them in water, and they’ll keep working.

Hang these lights above your workspace—they shine through long tubes to distribute even light with minimal glare and shadows. Carry them where you need them and suspend them from pipes, beams, and other overhead surfaces.

Hang these lights where you need them on the job site.

A series of bulb heads are attached to a power cord to provide overhead lighting for job sites.

Aim light where it's needed most in areas that don't have an electrical outlet.

Bring light to areas that don't have electrical power service.

Power these lights with the same battery as your other cordless tools. They run on a Milwaukee M18 battery to light up work where there’s no outlet.

Flood hazardous areas with light—these lights are intrinsically safe, meaning they can’t cause an explosion or fire. Rated NEC Class I, II, III, and Zone 0, they’re safe to use in areas with ignitable concentrations of flammable or combustible gases, dust, and fibers.

Safe to use in areas with ignitable concentrations of flammable or combustible gases, vapors, liquids, and dust, these lights are rated NEC Class I, Class II, and Zone 1.

With a rounded, weighted base, these floodlights wobble—but don't fall over—when bumped.

Bring light to remote areas with the DeWalt rechargeable battery that's already in your toolkit.

Brighten remote areas using the same battery as your other cordless Milwaukee tools.

Bring light to remote, wet areas. These floodlights are IP rated to handle humidity and dripping, splashing, and falling liquids. Adjust their tripod up and down to direct light as far as you need.

Brighten remote spaces with the DeWalt rechargeable battery that’s already in your toolkit. These floodlights extend up to 7 ft., and the light head turns at any angle to aim light where it’s needed.

As bright as stadium lights, these floodlights are the most powerful in our offering—they’ll brighten jobsites half the size of a football field. They run on a diesel generator you can use to power other lights and tools in the field.

Communicate a status at a glance by wiring these strip lights to change color when a part is malfunctioning inside your enclosure.

Keep your hands free by wearing a flashlight on your head.

Light up work without risking an explosion. NEC rated, these headlamps are safe to use in areas with ignitable concentrations of flammable or combustible gases, vapors, and liquids.

Drop these headlamps in water and they’ll still work—they’re IP rated to withstand submersion for at least 30 minutes.

Wear a flashlight around your neck to keep your hands free.

These lights have lenses that snap in and out, so you can easily swap colors or change their position in the stack.

Mount these lights horizontally or vertically in places where a tower will not fit.

Use these lights in tight spaces in place of a tower. They emit three colors from a single lens.

These lights emit three colors from a single lens and can be mounted in tight spaces where a tower will not fit.

These lights have LED bulbs for years of maintenance-free operation and can be wired as either continuous or flashing.

Use a computer to program colors, lighting patterns, and sounds to communicate a variety of status conditions, material levels, and cycle times—these stack lights have 21 colors and 11 sounds.

These lights are rated IP69K to withstand high-pressure washdowns, such as those in food and beverage applications.

Make a custom panel light with your choice of light and lens cap color.

You can use these lights outdoors and they will still be visible. Rated IP67 for harsh environments.

Stronger and with greater load capacities than gooseneck-style positioning arms, these arms keep their shape even when moving or when exposed to vibration. They’re often used in robotics and conveyor applications when frequent repositioning isn’t required.

Surround your camera with light for perfectly aligned brightness. These small and lightweight ring lights are mounted directly around your machine vision camera or vision sensor.

Ranging in size from a domino to a small TV remote control, these lights shine bright, even light from tight spots on your production line. Use them to help your machine vision camera capture a detailed image for inspection.

Flood bright, even light on parts so your machine vision camera can capture a detailed image for inspection.

Use these as replacement bulbs in stack lights.