Machine Table T-Slots | McMaster-Carr

Filter by

System of Measurement

Slot Width

Material

Length

Width

Thickness

T-Slot Width

Thread Size

Shape

Component

Number of T-Slots

T-Slot Center-to-Center

2 3/8"

2 1/2"

50 mm

Positioning Table Type

Standard

Tilting

Export Control Classification Number (ECCN)

EAR99

DFARS Specialty Metals

Table Length

Mount Type

RoHS

Compliant with Exemptions

T-Track Profile

Height

Maximum X-Axis Travel

Table Diameter

U.S.–Mexico–Canada Agreement (USMCA) Qualifying

Yes

REACH

Compliant

Not Compliant

Number of Mounting Holes

Diameter

3/4"

Forward

How can we improve?

102 Products

T-Slot Covers

Prevent chips, debris, and small parts from falling into T-slots. These covers snap securely into T-slots but can be easily removed to change your table setup. They can be cut to length.

	For Slot Wd.
	Inch	Metric, mm	Lg.		Each
Aluminum



		1/2"	12	39"	1353N11	000000


		9/16"	14	39"	1353N12	00000
		5/8", 11/16"	16	39"	1353N13	00000
		—	18	39"	1353N14	00000
		—	22	39"	1353N15	00000
		—	28	39"	1353N16	00000

T-Slot Fixture Plates

These plates have T-slots for fastening components with T-slot nuts, bolts, and setup studs.

Inch

These plates have three T-slots on top and a straight slot along each side for mounting with clamps.

Aluminum—Aluminum plates are lightweight and have mild corrosion resistance.

Iron—Iron plates are heavy duty for long-term use.

			T-Slots
Lg.	Wd.	Thk.	No. of	Wd.	Ctr.-to-Ctr.	Mounting Slot Ht.	Parallel Tolerance	Material		Each
13"	9"	1 1/2"	3	5/8"	2 1/2"	1/2"	0.005"	Aluminum	1957N11	0000000
13"	9"	2"	3	11/16"	2 1/2"	5/8"	0.0005"	Iron	1957N15	00000000
18"	9"	1 1/2"	3	5/8"	2 1/2"	1/2"	0.005"	Aluminum	1957N12	000000
24"	9"	1 1/2"	3	5/8"	2 1/2"	1/2"	0.005"	Aluminum	1957N13	000000

Metric

These plates have T-slots on all four sides and are milled flat on the top and bottom. The slots meet DIN 650, so they’re compatible with DIN 508 T-slot nuts and DIN 787 T-slot bolts for 8 mm wide slots.

Aluminum—Aluminum plates are lightweight and have mild corrosion resistance.

		T-Slots (A)			T-Slots (B)
Wd., mm	Thk., mm	No. of	Wd., mm	Ctr.-to-Ctr., mm	No. of	Wd., mm	Parallel Tolerance, mm	Material	Specs. Met		500 mm Long	1,000 mm Long	1,500 mm Long
150	40	5	8.1	50	2	8.1	0.3	Aluminum	DIN 650, EN 12020-2	1957N31	000000	0000000	0000000
250	40	9	8.1	50	2	8.1	0.3	Aluminum	DIN 650, EN 12020-2	1957N32	000000	000000	000000
350	40	14	8.1	50	2	6.5	0.1	Aluminum	DIN 650, EN 12020-2	1957N33	000000	000000	00000000

Precision-Adjust Cross-Slide Milling Tables

Standard-Table 50 lb. Load

Capacity

Image of Product. Front orientation. Contains Annotated. Milling Tables. Precision-Adjust Cross-Slide Milling Tables, Standard-Table 150 lb. Load Capacity.

Standard-Table 150 lb. Load Capacity

Tilting-Table 50 lb. Load

Capacity

For when handcrafted artistry matters. These tables position your work with exact alignment on the X- and Y-axes. Unlike CNC machines, they don’t need programming, so they’re great for one-off parts and quick prototypes. They’re precision ground to ensure accurate cuts every time.

These tables mount on your milling machine or drill press. The thick handles give you a firm grip for smooth turning of the steel hand wheels. As the table slides on its axes, an adjustable steel gib minimizes sticking and slipping. Tighten the lock nuts to keep the table steady as you machine.

Tilting Table—Cut your work from any angle. In addition to the same features as the Standard-Table 50 lb. Load Capacity table, these also position your work at any angle between 0° and 90°. Tighten the hex bolts on the side plates to keep the table at your desired tilt.

50 lb. Load Capacity—Double the T-slots for twice as many fixturing possibilities. The four T-slots give you the space to make elaborate fixture setups or hold your work from multiple sides. Cut with trapezoid-shaped Acme threads, the internal X-Y screws minimize backlash and won't deform. Balanced to prevent unintentional movement, the crank handles take less effort to turn than hand wheels. With bulbous grips, these handles fit comfortably in your palm.

150 lb. Load Capacity—The highest weight capacity of any table we offer. The wide base keeps the table stable when machining your heaviest work. They’re long enough that workpieces won’t hang off the edge and become unbalanced. With X-axis hand wheels on both ends of the table, you can adjust them no matter where you’re standing.

	Table		Base		Max. Travel					X-Axis T-Slots			Y-Axis T-Slots
	Lg.	Wd.	Lg.	Wd.	X-Axis	Y-Axis	X- and Y-Axis Adjustment Dial Graduations	Keyway Size	Overall Ht.	No. of	Wd.	Ctr.-to-Ctr.	No. of	Wd.	Ctr.-to-Ctr.	Flatness Tolerance	Material	Mounting Fasteners Included		Each
Standard-Table 50 lb. Load Capacity



		10"	6"	6 3/8"	7 5/8"	6"	4"	0.001"	5/8"	4 3/8"	1	7/16"	—	3	7/16"	2 1/2"	0.001"	Iron	No	5234A1	0000000


		Standard-Table 150 lb. Load Capacity



				18 5/8"	6"	7 1/8"	12"	12"	8"	0.001"	—	5 1/4"	2	1/2"	2 3/8"	—	—	—	0.002"	Iron	No	5179A29	000000


				Tilting-Table 50 lb. Load Capacity



						12"	6"	5"	9"	8"	4"	0.001"	5/8"	4 5/8"	1	7/16"	—	3	7/16"	3"	0.001"	Iron	No	5234A6	00000000

Rotary Angle Indexers


Indexer with Workpiece Shown in Vise	Indexer with Workpiece

Transform your machine vise into an indexing system in seconds. These indexers help you position round workpieces at precise, repeatable angles for machining flats, hexes, and key slots. Slide them onto the end of a workpiece and secure with the set screw. These indexers attach directly to your workpiece, so you can move them from setup to setup without losing your reference point. These indexers are etched with graduation marks up to 360° so you can line up your workpiece with a machinist square. A hex, square, and octagon are cut into the face, so you don’t need to check the graduations for 45°, 60°, or 90° increments.

For Workpiece Dia.	Angle Measured Range	Graduations	Angle Numeric Increments	Graduation Type	Lg.	Wd.	Thk.	Material	Includes		Each
1/4" to 1"	0° to 360°	5°	10°	Etched	1 1/2"	1 1/2"	3/4"	Zinc-Plated Steel	Set Screw	7866N102	000000
1" to 2"	0° to 360°	1°	10°	Etched	3"	3"	1 1/2"	Zinc-Plated Steel	Set Screw	7866N101	000000

T-Tracks

A versatile foundation for custom fixturing setups.

Single-Profile Straight T-Tracks

Use these compact T-tracks to mount objects on saw tables, CNC routers, drill presses, or any flat surface.

				Inside			Mounting Holes		For Mounting Screw
	Lg.	Wd.	Ht.	Width	Height	Mounting Fasteners Included	Number of	Center-to-Center	Size	Head Style	Material		Each
3/8" Wide Slot



		6"	3/4"	1/2"	1/2"	1/4"	No	2	3"	No. 10	Pan	Anodized Aluminum	1850A41	00000


		12"	3/4"	1/2"	1/2"	1/4"	No	4	3"	No. 10	Pan	Anodized Aluminum	1850A42	0000
		18"	3/4"	1/2"	1/2"	1/4"	No	6	3"	No. 8	Pan	Anodized Aluminum	1850A11	0000
		24"	3/4"	1/2"	1/2"	1/4"	No	8	3"	No. 8	Pan	Anodized Aluminum	1850A14	00000
		36"	3/4"	1/2"	1/2"	1/4"	No	12	3"	No. 8	Pan	Anodized Aluminum	1850A17	00000
		48"	3/4"	1/2"	1/2"	1/4"	No	16	3"	No. 8	Pan	Anodized Aluminum	1850A19	00000
		60"	3/4"	1/2"	1/2"	1/4"	No	20	3"	No. 10	Pan	Anodized Aluminum	1850A46	00000
		72"	3/4"	1/2"	1/2"	1/4"	No	24	3"	No. 10	Pan	Anodized Aluminum	1850A47	00000
		96"	3/4"	1/2"	1/2"	1/4"	No	32	3"	No. 10	Pan	Anodized Aluminum	1850A48	00000
		120"	3/4"	1/2"	1/2"	1/4"	No	40	3"	No. 10	Pan	Anodized Aluminum	1850A49	00000

Metric Single-Profile Straight T-Tracks

Use these compact T-tracks to mount objects on saw tables, CNC routers, drill presses, or any flat surface.

DIN 650—Sized to mate with DIN 508 T-slot nuts and DIN 787 T-slot bolts.

				Inside, mm
	Lg., mm	Wd., mm	Ht., mm	Width	Height	Material	Specs. Met		Each
5 mm Wide Slot



		600	17	12.25	10.5	4	Anodized Aluminum	DIN 650	8397N11	00000


		1,200	17	12.25	10.5	4	Anodized Aluminum	DIN 650	8397N12	00000


		6 mm Wide Slot



				600	18	15.25	11.5	5.5	Anodized Aluminum	DIN 650	8397N13	00000


				1,200	18	15.25	11.5	5.5	Anodized Aluminum	DIN 650	8397N14	00000


				8 mm Wide Slot



						600	21.5	19.75	15	7.5	Anodized Aluminum	DIN 650	8397N15	00000


						1,200	21.5	19.75	15	7.5	Anodized Aluminum	DIN 650	8397N16	00000


						10 mm Wide Slot



								600	23.5	22.25	17	7.5	Anodized Aluminum	DIN 650	8397N17	00000


								1,200	23.5	22.25	17	7.5	Anodized Aluminum	DIN 650	8397N18	00000


								12 mm Wide Slot



										600	26.5	25.75	20	8.5	Anodized Aluminum	DIN 650	8397N19	00000


										1,200	26.5	25.75	20	8.5	Anodized Aluminum	DIN 650	8397N21	00000


										14 mm Wide Slot



												600	30.5	28.75	24	10	Anodized Aluminum	DIN 650	8397N22	00000


												1,200	30.5	28.75	24	10	Anodized Aluminum	DIN 650	8397N23	00000


												18 mm Wide Slot



														600	37.5	36.25	31	13	Anodized Aluminum	DIN 650	8397N24	00000


1,200	37.5													36.25	31	13	Anodized Aluminum	DIN 650	8397N25	00000

Single-Profile Perpendicular T-Tracks

Join T-tracks at 90° to create tidy grids and spread clamping points across your workspace.

				Inside			Mounting Holes		For Mounting Screw
	Lg.	Wd.	Ht.	Width	Height	Mounting Fasteners Included	Number of	Center-to-Center	Size	Head Style	Material	No. of Pieces		Each
3/8" Wide Slot



		4"	3/4"	1/2"	1/2"	1/4"	No	2	2"	No. 6	Pan	Anodized Aluminum	4	1850A12	000000

Double-Profile Straight T-Tracks

Combine two or more of these tracks to create the exact layout you need. They're ideal for space-efficient, multi-axis setups—from modular jigs to fences to fixture bases.

				Inside
	Lg.	Wd.	Ht.	Width	Height	Material		Each
3/8" Wide Slot



		18"	1 3/8"	1/2"	1/2"	1/4"	Anodized Aluminum	1850A53	000000


		48"	1 3/8"	1/2"	1/2"	1/4"	Anodized Aluminum	1850A55	00000

Triple-Profile Straight T-Tracks

Combine two or more of these tracks to create the exact layout you need. They're ideal for space-efficient, multi-axis setups—from modular jigs to fences to fixture bases.

				Inside
	Lg.	Wd.	Ht.	Width	Height	Material		Each
3/8" Wide Slot



		18"	1 3/4"	1/2"	1/2"	1/4"	Anodized Aluminum	1850A63	000000


		48"	1 3/4"	1/2"	1/2"	1/4"	Anodized Aluminum	1850A65	00000

Quad-Profile Straight T-Tracks

Combine two or more of these tracks to create the exact layout you need. They're ideal for space-efficient, multi-axis setups—from modular jigs to fences to fixture bases.

				Inside
	Lg.	Wd.	Ht.	Width	Height	Material		Each
3/8" Wide Slot



		18"	1 1/2"	3/4"	1/2"	1/4"	Anodized Aluminum	1850A73	000000


		48"	1 1/2"	3/4"	1/2"	1/4"	Anodized Aluminum	1850A75	00000

Hex Head Screws

Slide hex head screws along the track to create mounting points for components.

Secure hex head screws with a lock nut.

Head Wd.	Thread Size	Material	Pkg. Qty.		Pkg.



1"	7/16"	1/4"-20	Steel	10	1850A22	00000


2"	7/16"	1/4"-20	Steel	10	1850A23	0000
3"	7/16"	1/4"-20	Steel	10	1850A24	0000
4"	7/16"	1/4"-20	Steel	10	1850A25	0000

Locknuts

Secure hex head screws with a lock nut.

Lg.	Thread Size	Material		Each



3/4"	5/8"	1/4"-20	Steel	1850A26	00000


3/4"	5/8"	1/4"-20	303 Stainless Steel	1850A32	0000
1"	3/4"	1/4"-20	Steel	1850A33	0000
1"	3/4"	1/4"-20	303 Stainless Steel	1850A34	00000

T-Nuts

Slide T-nuts along the track to create mounting points for components.

Wd.	Thread Size	Material	Pkg. Qty.		Pkg.



7/8"	7/16"	8-32	Steel	25	1850A27	00000


7/8"	7/16"	10-24	Steel	25	1850A28	0000
1"	7/16"	1/4"-20	Steel	25	1850A29	0000

Hold-Down Clamps

Hold-down clamps slide along a T-track and secure a workpiece. Tighten with a turn of the knob. Mount them to the track using the included hex head screw.

Lg.	Wd.	Material		Each



2 1/2"	4 1/4"	1"	Steel	1850A21	00000

Cam Clamps

Cam clamps slide along a T-track and secure a workpiece from the side, so they don’t block access to the top of it. For a tight grip, they have an angled jaw that applies focused pressure as you turn the handle. They’re often used to hold workpieces on CNC machines.

Wd.	Material		Each



1 3/8"	2 3/16"	Steel	1850A31	000000

Precision-Adjust Rotary Tables


Standard Table	Mounted Horizontally

Heavy Duty Table	Heavy Duty Tilting Table

Turn workpieces 360° for precise alignment during milling, drilling, and grinding. With finely ground worm gears, these tables give you fine control of your workpiece’s alignment to fractions of a degree. The gears also keep the tabletop from moving once your workpiece is in position, even if you bump it or press against it while you machine. Markings on the handle’s dial and the tabletop’s edge tell you how far you’ve moved, so you don’t overshoot your mark. The tabletop and base are ground so flat their surfaces vary less than the thickness of a single sheet of copy paper, so they give you the flattest and squarest possible surface for accurate work. The base also has both keyways and bolt slots to mount these tables in both vertical and horizontal orientations.

Heavy Duty Table—These tables move in smaller increments for finer control than our standard rotary tables. They’re also machined three times flatter, virtually eliminating uneven positioning. Once the table is in position, dual locks prevent even the slightest table rotation. Hardened and oil-immersed gears extend their life, especially in high-demand machining.

Heavy Duty Tilting Table—The same upgraded performance as our heavy duty standard tables but with an adjustable tilt. Tilt these tables between 0° and 90° to cut your workpieces at an angle. Compared to our standard rotary tables, these move in smaller increments for finer control. They’re also machined three times flatter to virtually eliminate uneven positioning. Dual locks prevent even the slightest table rotation after the table is in position. Hardened and oil-immersed gears extend their life, especially in high-demand machining.

Gear Ratio—Gear ratio describes how far the table rotates with every turn of the handle. For example, a 90:1 gear ratio means a 90° turn of the handle rotates the table 1°.

Tailstocks—Support long workpieces to improve stability during indexing and machining.

	Rotary Tables																			Tailstocks
		Load Cap., lb.			Base			T-Slots					Rotation Graduations
	Table Dia.	Horizontal	Vertical	Gear Ratio	Lg.	Wd.	Overall Ht.	No. of	Wd.	Ctr. Bore Type	Ctr. Bore Dia.	Machine Taper No.	Adjustment Dial	Table	Flatness Tolerance	Material	Mounting Fasteners Included		Each		Each
Standard Table



		8"	160	80	40:1	12"	9 1/2"	3 7/8"	2	5/8"	Straight	1 5/8"	—	1/20°	1°	0.002"	Iron	No	5209A1	000000000	8795N13	0000000


		10"	200	100	40:1	12"	9 1/2"	3 7/8"	2	5/8"	Straight	1 5/8"	—	1/20°	1°	0.002"	Iron	No	5209A2	00000000	8795N13	000000


		Heavy Duty Table



				6"	90	40	90:1	8"	6 5/16"	3 1/8"	3	3/8"	Morse Taper	—	Morse 3	1/10°	1°	0.0006"	Steel	No	5209A5	000000	8795N11	000000


				8"	175	85	90:1	10 1/2"	8 5/8"	4 1/8"	6	1/2"	Morse Taper	—	Morse 3	1/4°	1°	0.0006"	Steel	No	5209A6	00000000	8795N12	000000
				10"	195	110	90:1	12 3/4"	11"	4 1/2"	6	1/2"	Morse Taper	—	Morse 3	1/4°	1°	0.0006"	Steel	No	5209A7	00000000	8795N13	000000
				12"	265	130	90:1	15 5/16"	13"	5"	6	5/8"	Morse Taper	—	Morse 4	1/10°	1°	0.0006"	Iron	No	5209A8	00000000	8795N14	000000
				16"	310	130	90:1	20"	17"	5 1/8"	6	5/8"	Morse Taper	—	Morse 4	1/10°	1°	0.0006"	Iron	No	5209A9	00000000	8795N14	000000


				Heavy Duty Tilting Table



						6"	75	35	90:1	9 3/4"	6"	8 1/2"	3	3/8"	Morse Taper	—	Morse 3	1/4°	1°	0.0006"	Steel	No	5209A31	00000000	———	0

T-Slot Fixture Tables


	Tables Style A	Tables Style B

Build custom workspaces with no drilling or tapping required. Slide in T-slot bolts or T-slot nuts with setup studs to mount work holders, light machinery, collaborative robots, and more. The T-shaped slots on these tables are spaced 50 mm apart. This is a common layout in modular workbenches used for prototyping, automation, and optical sensor setups. Adjust the leveling feet to compensate for uneven floors and create a stable base. Since tables are made of aluminum, they're nonmagnetic and won’t interfere with robotic sensors, control systems, or communication signals. They’re also lightweight and corrosion resistant for easy handling and frequent cleaning.

Tables


Style A	Style B

Style A—Store tools and accessories on the bottom shelf.

Style B—The back panel adds a vertical fixturing surface for mounting components on another axis.

Casters—Make tables mobile.

	Fixture Tables																			Casters
	Overall				Shelves			T-Slots
	Lg., mm	Wd., mm	Ht., mm	Wt. Cap., lb.	Movement	No. of	Clearance, mm	No. of	Wd., mm	Ctr.-to-Ctr., mm	Mounting Slot Ht., mm	Back Panel Height, mm	Plate Thk., mm	Parallel Tolerance, mm	Frame Material	Plate Material	Features		Each		Each
Style A



		1,000	500	750	495	Fixed	1	452	10	8	50	7	—	12	Not Rated	Aluminum	Aluminum	Leveling Feet	7710N14	000000000	———	0


		1,500	750	750	1,045	Fixed	1	452	15	8	50	7	—	12	Not Rated	Aluminum	Aluminum	Leveling Feet	7710N15	00000000	2445T41	000000
		1,500	1,000	750	1,045	Fixed	1	452	20	8	50	7	—	12	Not Rated	Aluminum	Aluminum	Leveling Feet	7710N16	00000000	2445T41	00000


		Style B



				1,000	500	1,300	440	—	—	—	20	8	50	7	500	12	0.3	Aluminum	Aluminum	Leveling Feet	7710N24	00000000	———	0


				1,500	750	1,300	880	—	—	—	20	8	50	7	500	12	0.3	Aluminum	Aluminum	Leveling Feet	7710N25	00000000	2445T41	00000

Accessories for Fixture Tables

Robot Mounts

Secure your robot arm to tables.

							Robot Mounting Location
	For Robot Arm Mfr. (Series/Model No.)	Wd., mm	Lg., mm	Thk., mm	Static Load Cap.	T-Slotted Fixture Table Mount Type	Mount Type	Mounting Hole Thread Size (No. of Holes)	Mounting Fasteners Included		Each
Anodized Aluminum



		FANUC (CRX 5iA)	225	225	22.5	Not Rated	T-Slot Nut	Bolt On	M8 (4)	No	8191N12	0000000


		FANUC (CRX 10iA, 10iA/L, 20iA)	225	225	22.5	Not Rated	T-Slot Nut	Bolt On	M8 (4)	No	8191N13	000000
		Universal (UR3, UR3e)	180	180	22.5	Not Rated	T-Slot Nut	Bolt On	M6 (4)	No	8191N21	000000
		Universal (UR5, UR5e)	225	225	22.5	Not Rated	T-Slot Nut	Bolt On	M8 (4)	No	8191N22	000000
		Universal (UR10, UR10e, UR16e)	225	225	22.5	Not Rated	T-Slot Nut	Bolt On	M8 (4)	No	8191N23	000000

Angle Plates

Mount workpieces in precisely located holes for repeatable setups. These plates ensure accurate right angles and hold workpieces and fixtures perpendicular to tables.

				Hole			Slot
	Lg., mm	Wd., mm	Ht., mm	No. of	Dia., mm	Dp., mm	No. of	Wd., mm	Lg., mm	Wt., lb.	Material		Each
Standard Tolerance



		150	221	300	141	7	8	4	7	87	6	Aluminum	5230A41	0000000


		221	75	446	75	6.5	12	—	—	—	6	Aluminum	5230A42	000000
		221	221	446	189	7	12	12	7	81	13	Aluminum	5230A43	000000

Precision-Adjust Cross-Slide Rotary Tables


Standard Table	Tilting Table

These tables do it all. They rotate 360° and slide on the X-Y axes to position your work with exact alignment. Cut with trapezoid-shaped Acme threads, the internal X-Y screws minimize backlash and won’t deform. They’re precision ground to ensure accurate cuts every time.

Mount these tables on your milling machine, drill press, or grinder. They reduce the height of your setup by over 30% compared to stacking rotary and milling tables. Balanced to prevent unintentional movement, the crank handles take less effort to turn than hand wheels. With bulbous grips, these handles fit comfortably in your palm. Graduations engraved on the bases of the handle and table help you line up your work in fractions of a degree. Tighten the locking clamp on the side of the table base to keep the table steady as you machine.

Tilting Table—The most versatile tables we offer. They also tilt in 1° increments to any angle between 0° and 90°, so you can machine parts from any direction. Tighten the hex bolts on the side plates to keep the table at your desired tilt.

Gear Ratio—Gear ratio describes how far the table rotates with every turn of the handle. For example, a 90:1 gear ratio means a 90° turn of the handle rotates the table 1°.

		Load Cap., lb.			Base		Max. Travel				T-Slots				Rotation Graduations
	Table Dia.	Horizontal	Vertical	Gear Ratio	Lg.	Wd.	X-Axis	Y-Axis	X- and Y-Axis Adjustment Dial Graduations	Overall Ht.	No. of	Wd.	Ctr. Bore Type	Ctr. Bore Dia.	Adjustment Dial	Table	Flatness Tolerance	Material	Mounting Fasteners Included		Each
Standard Table



		8"	160	80	40:1	6 1/4"	7 1/2"	4"	4"	0.001"	5 1/2"	2	5/8"	Straight	1 5/8"	1/20°	1°	0.001"	Iron	No	5207A4	000000000


		10"	200	100	40:1	6 1/4"	7 1/2"	4"	4"	0.001"	5 3/8"	2	5/8"	Straight	1 5/8"	1/20°	1°	0.001"	Iron	No	5207A7	00000000


		Tilting Table



				8"	160	80	40:1	5"	9"	4"	4"	0.001"	5"	2	5/8"	Straight	1 5/8"	1/20°	1°	0.001"	Iron	No	5207A5	00000000


				10"	200	100	40:1	5"	9"	4"	4"	0.001"	5 3/4"	2	5/8"	Straight	1 5/8"	1/20°	1°	0.001"	Iron	No	5207A8	00000000

Rotary Table Mounting Kits for Lathe Chucks

Use these kits to mount lathe chucks to your rotary table—they come with everything you need for a precise, rigid setup. Choose a kit that’s compatible with the brand and model of your rotary table.

	For Mfr. Model No.		Each
For Haas



	6"	HRC160, HRT160, HRT160SP, HRT160SS, TR160, TR200Y, TRT160	7698N121	0000000


	8"	HRC210, HRT210, HRT210SP, HRT210SS, TR210, TRT210	7698N122	000000
	10"	HRC210, HRT210, HRT210SP, HRT210SS, TR210, TRT210	7698N123	000000
	12"	HRT310, HRT310SP, TR310	7698N124	000000


	For Kitagawa



			8"	GT200, MR200	7698N125	000000


			10"	GT250, MR250	7698N126	00000000


			For DMG Mori



					8"	DDRT200	7698N127	000000


					10"	DDRT260	7698N128	000000


					For Hurco



							8"	H200	7698N129	000000


							10"	H250	7698N131	00000000