Easier to spot than other strobe lights, these lights emit bursts of five flashes per cycle. Plug into a standard 12-volt vehicle receptacle and mount using the magnetic base.

Light intensity is measured in candlepower (cp), which indicates how bright a light appears at a distance. Common examples include a car’s taillights (50 cp), traffic signals (600 cp), headlights (15,000 cp), high beams (50,000 cp), and police car searchlights (150,000 cp).

For technical drawings and 3-D models, click on a part number.

As small as a hockey puck and compatible with standard 12-volt vehicle plugs, these strobe lights are inconspicuous when not in use and quick to connect. Their magnetic base lets you mount them without drilling holes in your surface. They use LED light, which is more efficient and lasts longer than other kinds of light. Rated IP67, they seal out dust and moisture even if there’s continuous airflow or they’re submerged in water for up to 30 minutes. Use them on the exterior of emergency, construction, and farm vehicles without fear of the elements damaging the lights. They don’t contain any moving parts, which helps them last a long time.

Most meet SAE J845, which is a standard for warning lights used on emergency, maintenance, and service vehicles. Class 1 have the brightest light output, so they’re used for emergency vehicles. Class 2 is common for wide-load vehicles. Class 3 is typical on forklifts used inside warehouses.

Light intensity is measured in candlepower (cp), which indicates how bright a light appears at a distance. Common examples include a car’s taillights (50 cp), traffic signals (600 cp), headlights (15,000 cp), high beams (50,000 cp), and police car searchlights (150,000 cp).

Plug these into a standard 12-volt vehicle receptacle and mount using the magnetic base. Lights meet NEMA 3 and IP62 for protection from corrosion and wet environments.

Light intensity is measured in candlepower (cp), which indicates how bright a light appears at a distance. Common examples include a car’s taillights (50 cp), traffic signals (600 cp), headlights (15,000 cp), high beams (50,000 cp), and police car searchlights (150,000 cp).

For technical drawings and 3-D models, click on a part number.

Plug these into a standard 12-volt vehicle receptacle and mount using the magnetic base. Lights meet NEMA 4X for protection from corrosion and washdowns.

Light intensity is measured in candlepower (cp), which indicates how bright a light appears at a distance. Common examples include a car’s taillights (50 cp), traffic signals (600 cp), headlights (15,000 cp), high beams (50,000 cp), and police car searchlights (150,000 cp).

For technical drawings and 3-D models, click on a part number.

A series of four flashes per cycle makes this light more visible than other strobe lights. Plug into a standard 12-volt vehicle receptacle and mount using the magnetic base.

For technical drawings and 3-D models, click on a part number.

These strobe lights flash multiple times per cycle, making them easier to spot than standard strobe lights. They’re rated IP65 for protection from dust—even in areas with continuous airflow—and low-pressure jets of water. These strobe lights use an LED bulb that will last for years. Position them quickly with the magnetic-mount base.

For technical drawings and 3-D models, click on a part number.

Carry these lights around with you and place them wherever needed. The LED bulb provides years of maintenance-free operation.

For technical drawings and 3-D models, click on a part number.

These lights can switch between continuous, flashing, or revolving. Place them wherever needed—they don't need to be wired or plugged in. The LED bulb provides years of maintenance-free operation.

Lights with a magnetic base can be quickly positioned on metal surfaces.

For technical drawings and 3-D models, click on a part number.

Plug into a standard 12-volt vehicle receptacle and mount using the magnetic base.

For technical drawings and 3-D models, click on a part number.

Plug these lights into a standard vehicle receptacle and mount using the magnetic base.

LED bulbs last longer than halogen and incandescent bulbs and provide years of maintenance-free operation.

Aluminum lights meet NEMA 3 for protection from corrosion and wet environments.

Light intensity is measured in candlepower (cp), which indicates how bright a light appears at a distance. Common examples include a car’s taillights (50 cp), traffic signals (600 cp), headlights (15,000 cp), high beams (50,000 cp), and police car searchlights (150,000 cp).

For technical drawings and 3-D models, click on a part number.