A rubber seal protects these switches from splashing water.

Maximize the space in a panel—these switches are half the size of most toggle switches.

Able to withstand high currents, these switches are often used with motors and pumps.

Mount these switches under your desktop to keep your workspace clear and prevent accidental switching.

A single-piece construction prevents the contact block from separating from the actuator in high-vibration applications.

The face of these switches mounts flush against a panel, so they're easy to clean and hard to damage.

Immediately cut power with a single push.

Save space on a panel by using one switch to perform multiple switching functions.

Immediately cut power with a single push.

Use these switches where ignitable gas and dust may be present. They're rated for use in hazardous locations.

These aluminum switches are rated NEMA 4, NEMA 13, and IP66 for protection from washdowns and oil/coolant spraying.

Immediately cut power with a single push.

Choose from a variety of messages and colored lenses to combine a rocker with a base and wiring socket for a complete switch.

Also known as high-inrush current switches, these switches can handle starting currents up to 10 times greater than their rating, such as when a motor starts.

Maximize space in a panel—these switches are smaller than most standard rocker switches.

These switches are protected from corrosion, high-temperature and high-pressure washdowns, and oil/coolant spraying. Install them in 22 mm dia. cutouts.

Rated NEMA 4, 13, and IP66, these metal switches are protected from washdowns and oil/coolant spraying. Install them in 30 mm dia. cutouts.

Install in 16 mm dia. cutouts.

Use these switches where ignitable gas, dust, and fibers may be present. They're UL and C-UL listed for hazardous locations.

Choose an actuator and contact block to make your own 30 mm switch.

Choose an actuator and contact block to make your own 16 mm switch.

Control cranes and other mobile machinery in dirty, outdoor, and wet environments without damaging your switch.

Operate these switches hands-free when working in damp or humid environments.

Control multiple devices with one switch. Turn the shaft to change switch positions.

Install these key switches in 3/4" dia. panel cutouts. They require a key to turn circuits on or off, limiting access to sensitive equipment.

With a round key that is difficult to duplicate, these switches provide a higher degree of security than standard key switches.

Install these key switches in 30 mm dia. panel cutouts. They require a key to turn circuits on or off, limiting access to sensitive equipment.

These 16 mm switches require a key to turn circuits on or off, limiting access to sensitive equipment.

Immediately cut power by pulling the cable.

Intuitively steer and position cranes, robot arms, and other machinery that moves in multiple directions—your equipment will follow the movements you make with these joysticks.

Often used with machine guards, these switches mount to a door frame.

Often used in large, open workspaces, these switches can be wired on opposite ends of the room to control lights on the same circuit. They're also known as three-way and four-way switches.

Also known as three-way switches, these are often used in large, open workspaces and can be wired on opposite ends of the room to control lights on the same circuit.

Prevent accidental activation—these switches require a key to turn lights on and off.

Secure sensitive lighting equipment; these switches have a round key that is difficult to duplicate.

Press these switches with your foot for convenient, hands-free operation.

Rated NEMA 4X, these switches are protected from corrosion and washdowns.

Use these switches where ignitable gas and dust may be present. They're rated Class I, Divisions 1 and 2, Groups C and D; and Class II, Divisions 1 and 2, Groups E, F, and G for hazardous locations.

Use these switches with motors that run forward and backward, such as motors for conveyor belts.

These switches are housed in a protective enclosure so they can be mounted wherever needed.

A raintight NEMA 3R rated enclosure protects these switches outdoors.

Rated IP69K, these switches are protected from high-pressure and high-temperature washdowns.

Rated IP66, these switches are protected from washdowns.

These relays switch through a series of different circuit configurations every time they receive an input voltage. Also known as step relays.