These sets include an assortment of sockets and wrenches for occasional maintenance work.

The handle drains static away from your application, preventing buildup from electrostatic discharge (ESD) that can damage sensitive equipment. Also known as ESD-safe screwdrivers and nutdrivers.

You only need one tool—slide a different shaft into the handle to change tip size or drive style.

These tools have an insulated grip to protect against accidental contact with live electrical circuits. They are tested to 1,000 volts to meet ASTM F1505 and IEC 60900.

Made in the U.S.A., these tools handle the toughest industrial applications, provide the best grip on fasteners, and have a superior finish.

Made of aluminum-bronze, these sockets satisfy OSHA requirements that specify nonsparking tools for locations where flammable vapors and combustible residues are present.

Suitable for occasional maintenance work, these sets are imported.

Pivot the head to access fasteners from an angle.

With squared lobes that won’t slip at high torque, all of the sockets in these sets are designed to fit on external Torx-Plus fasteners, often found on pickup trucks.

Grip the indentations around the outside of tri-groove fasteners.

Keep a convenient mix of hex, Torx, Phillips, and slotted bit sockets on hand.

The ball end allows angled entry when you don't have exact alignment between the socket bit and fastener.

The short bit on these sockets fits in spaces where height clearance is limited.

Make maximum contact on all sides of a fastener to reduce slipping. These sockets are also known as torque adapters.

Often used with an extension, these sockets turn fasteners and fittings in obstructed areas that a regular socket can't reach. They are also known as crowfoot wrenches.

Lock your socket into the extension to prevent accidental disengagement..

Lock your socket into the extension to prevent accidental disengagement.

Attach to your socket for a longer reach.

Use these sockets as an alternative to a screwdriver or L-key. They are made to withstand the high torque and force of impact tools.

Remove and install dual wheels on trucks and trailers with the sockets in these sets.

Suitable for occasional maintenance work, these sets are imported.

Made of aluminum-bronze that is Factory Mutual approved, these wrenches inhibit sparking and are nonmagnetic and corrosion resistant.

When working in tight spaces, these short wrenches fit where others can't.

Suitable for occasional maintenance work, these sets are imported.

A spline-shaped box end turns spline, hex, and 12-point fasteners. This shape also gets a better grip on rounded fasteners that can be difficult to turn with a traditional wrench.

Made in the U.S.A., these tools handle the toughest industrial applications, provide the best grip on fasteners, and have a superior finish.

Pivot the box end for access to fasteners in tight spots.

The handles are covered in plastic for a comfortable grip.

One head is angled 60° for access to hard-to-reach fasteners. These are also known as ignition wrenches.

The opening shape makes more contact with fasteners for a better grip than standard open-end wrenches. These tools are also known as flare-nut or line wrenches.

Fit the narrow head into tight spaces and around thin fasteners.

When turning fasteners in small spaces, these short wrenches fit where others can't.

The heads are offset 45° to provide clearance for reaching over obstructions.

A ratchet mechanism allows you to turn fasteners in tight spaces without removing and repositioning the wrench.

Sets include various sizes of wrenches that are shaped to fit round holes on the circumference of collars, bearings, and other machine tool components.

Made of stainless steel, these wrenches have excellent corrosion resistance.

All of the keys in these sets have an extra-short leg to fit into tight spots and a ball end to turn screws at an angle in hard-to-reach places. Their bright chrome-plated finish makes them easy to see, reducing the chance you’ll lose them.

Sets include assorted keys with each size a different color for easy identification. When a standard-tip key can't make good contact with the recess, a ball end allows angled entry to turn screws in hard-to-reach places.

The assorted tools in these sets have a flexible joint that provides access to fasteners in hard-to-reach areas.

When a standard-tip key can't make good contact with the recess, a ball end allows angled entry to turn screws in hard-to-reach places. These keys have a zinc coating that resists salt-spray exposure.

These assorted keys have a ball end that allows angled entry to make good contact with the screw recess when standard-tip keys can’t. Use to turn screws in hard-to-reach spots.

Sets include an assortment of keys. These simple tools turn fasteners from either end and reach into tight spots.

Sets include an assortment of stainless steel keys with a ball end that allows angled entry to turn screws in hard-to-reach areas. Use a stainless steel L-key to protect your stainless steel screws. If steel flakes off a standard tool and into the recess, it can lead to rust and contamination. These keys eliminate that risk.

The assorted keys in these sets have a small handle that prevents you from generating too much torque when turning a fastener. They are often used to install carbide inserts in cutting tools.

Select any key without unfolding the others in the set. The assorted keys turn multiple fastener sizes.

Bright-colored handles make these tools stand out, so they’re less likely to be misplaced. Sets include an assortment of keys for turning multiple fastener sizes.

Set includes a handle and six shafts. Remove and replace the shaft to use a different size or drive style.

The assorted drivers in these sets have a ball end that allows angled entry to turn screws in hard-to-reach areas. Use the rotating end cap on the handle to apply constant pressure with your palm while turning the body of the screwdriver with your fingertips.

Sets include an assortment of drivers with a rotating end cap on the handle that allows you to apply constant pressure with your palm while turning the body of the screwdriver with your fingertips.

The handle on these assorted ESD-safe nutdrivers drains static away from your application, preventing buildup from electrostatic discharge (ESD) that can damage sensitive equipment. Press the rotating end cap to apply constant pressure with your palm while turning the body of the screwdriver with your fingertips.

Sets include an assortment of drivers that allow you to apply constant pressure to small hex nuts and cap screws. Press the rotating end cap on the handle with your palm while turning the body of the driver with your fingertips.

The ball-end tip allows angled entry to turn screws in hard-to-reach areas. These tools are a scaled-down version of standard changeable-shaft screwdrivers, They're shorter, slimmer, and easy to take with you. Remove and replace the shaft to change the tip size.

A scaled-down version of standard changeable-shaft screwdrivers, these tools are shorter, slimmer, and easy to take with you. Remove and replace the shaft to use a different tip size.

Sets include an assortment of drivers with soft, contoured handles that provide comfort and the best possible grip for achieving maximum torque.

Sets include an assortment of drivers with a ring that can be secured with a lanyard to prevent drops. The ring rotates around the shaft so the driver turns freely.

Sets include an assortment of drivers with a cushioned grip that provides comfort and some slip resistance.

The assorted drivers in these sets have a ball end that allows angled entry to turn screws in hard-to-reach areas.

Sets include assorted drivers with an insulated handle and shaft that protect against shock from accidental contact with live electrical circuits. They are tested to 1,000 volts to meet IEC, EN, or ASTM standards.

These assorted screwdrivers are made of beryllium copper that is FM approved. They help meet OSHA requirements that specify nonsparking tools for locations where flammable vapors and combustible residues are present.

The tips of these assorted drivers have ribbed grooves that grip the surface of the recess to reduce slipping and minimizing the pressure required to achieve maximum torque.

The handle on these assorted drivers drains static away from your application, preventing buildup from electrostatic discharge (ESD) that can damage sensitive equipment. They're also known as ESD-safe screwdrivers.

The assorted keys in these sets have an insulated handle and shaft that protect against shock from accidental contact with live electrical circuits. These tools are tested to 1,000 volts to meet IEC 60900 and ASTM F1505-01. They have a long shaft that reaches into tight spots to turn fasteners.

These assorted keys have a retaining ring on the tip that grips inside the recess to hold screws in place. Often used to install carbide inserts in cutting tools, these keys have a small T-handle that prevents you from generating too much torque when turning a fastener.

The assorted keys in these sets have a small T-handle that prevents you from generating too much torque when turning a fastener. They are often used to install carbide inserts in cutting tools.

These assorted keys have a ball-end tip with a retaining ring that grips inside the recess to hold screws in place and allows angled entry to turn fasteners in hard-to-reach areas.

The assorted keys in these sets have a long shaft for more reach and a short shaft for more torque when turning fasteners.

These assorted keys have an extra-long shaft that provides access to fasteners in deep recesses. To change tips, use a hex key to loosen the set screw.

These sets include an assortment of keys with a ball end on the long shaft, which allows angled entry to turn screws in hard-to-reach areas. The short shaft provides additional torque.

Bend the shaft around obstructions to access nuts in tight spots, such as when securing hose clamps.

Press down on the handle’s collar to adjust the shaft length or remove and replace the shaft to change sizes. Sets include a handle and multiple shafts.

A scaled-down version of standard nutdrivers, these tools are shorter, slimmer, and easy to take with you.

The extractors in these sets have a tapered wedge shape that won’t expand the broken part, making it easier to remove. After drilling, tap in with a hammer and turn.

Use a power tool to quickly extract a fastener.

No more searching for the right drill bit sizes—these sets match them with the corresponding extractors.

These sets have a variety of extractors to drill and remove broken screws, bolts, and studs with a single tool.

Keep a selection of extractors on hand to back out a variety of broken parts without damaging the threads around them.

With a short and stocky design, the extractors in these sets provide a strong grip without needing to drill a deep hole. After drilling, insert the extractor and turn.

Sets include a selection of extractors you place over stripped or deformed bolt heads that can be difficult to grip with a wrench. Tap in place with a hammer and turn to extract without damaging the threads around the fastener.

Use these sets to extract socket head cap screws that have damaged or rounded recesses without drilling.

Working with large retaining rings is easier with a T-handle. Turn it to open and close the jaws. Change tips for a different size or angle using the included hex key.

Change tips to use a different size or angle.

The pliers in these sets have a handle that locks in place to hold rings open or closed for easier installation and removal. Change tips to use a different size or angle.

Twist the handle to open and close the jaws. Change tips for a different size or angle using a hex key.

Sets contain an assortment of pliers styles. These tools are steel.

Choose these stainless steel pliers for environments where moisture and other contaminants are present. They resist corrosion that can hinder joint movement, but the jaws will wear more quickly than a steel tool.

More jaw positions than standard adjustable pliers enable fine adjustment and a firm grip. Push and hold the button to adjust the jaws, and then release the button to lock them in place.

Choose these tools when you need the gripping power of a pipe wrench with the adjustability of pliers. Slide the pivot point of the jaws to a range of positions.

Lock the jaws in a vise-like grip around a workpiece and these assorted pliers stay clamped in place to leave your hands free.