Manual Staplers
This general purpose stapler does not clinch the staple.
For Staple | |||||
|---|---|---|---|---|---|
| Wd. | Leg Lg. | Staple Capacity | Material | Each | |
| 3/8" | 1/4", 5/16", 3/8", 7/16", 1/2", 9/16" | 70 | Chrome-Plated Steel | 0000000 | 000000 |
Small Pack | Large Pack | ||||||
|---|---|---|---|---|---|---|---|
| Leg Lg. | Wire Gauge  | Pkg. Qty. | Pkg. | Pkg. Qty. | Pkg. | ||
Galvanized Steel | |||||||
| 1/4" | 16 | 1,250 | 00000000 | 00000 | 5,000 | 000000000 | 000000 |
| 5/16" | 16 | 1,250 | 00000000 | 0000 | 5,000 | 000000000 | 00000 |
| 3/8" | 16 | 1,250 | 00000000 | 0000 | 5,000 | 000000000 | 00000 |
| 1/2" | 16 | 1,250 | 00000000 | 0000 | 5,000 | 000000000 | 00000 |
| 17/32" | 16 | 1,250 | 00000000 | 0000 | 5,000 | 000000000 | 00000 |
| 9/16" | 16 | 1,250 | 00000000 | 0000 | 5,000 | 000000000 | 00000 |
Stainless Steel | |||||||
| 3/8" | 16 | 1,000 | 00000000 | 00000 | 5,000 | 000000000 | 00000 |
400 Nickel | |||||||
| 1/4" | 16 | 1,000 | 00000000 | 00000 | __ | 000000 | 00 |
| 5/16" | 16 | 1,000 | 00000000 | 00000 | __ | 000000 | 00 |
| 3/8" | 16 | 1,000 | 00000000 | 00000 | __ | 000000 | 00 |
| 1/2" | 16 | 1,000 | 00000000 | 00000 | __ | 000000 | 00 |
Manual Staplers with Adjustable Drive
A knob lets you select the best drive depth for your application. The stapler does not clinch the staple.
For Staple | ||||||
|---|---|---|---|---|---|---|
| Wd. | Leg Lg. | Staple Capacity | Material | Appearance | Each | |
| 1/2" | 3/16", 1/4", 5/16", 3/8", 7/16", 1/2", 9/16" | 80 | Chrome-Plated Steel | Polished | 0000000 | 000000 |
| Leg Lg. | Wire Gauge | Pkg. Qty. | Pkg. | |
Galvanized Steel | ||||
|---|---|---|---|---|
| 3/16" | 20 | 5,000 | 00000000 | 000000 |
| 1/4" | 20 | 5,000 | 00000000 | 0000 |
| 5/16" | 20 | 5,000 | 00000000 | 0000 |
| 3/8" | 20 | 5,000 | 00000000 | 0000 |
| 1/2" | 20 | 5,000 | 00000000 | 00000 |
| 9/16" | 20 | 5,000 | 00000000 | 00000 |
Steel | ||||
| 1/4" | 20 | 1,000 | 00000000 | 0000 |
| 5/16" | 20 | 1,000 | 00000000 | 0000 |
| 3/8" | 20 | 1,000 | 00000000 | 0000 |
| 1/2" | 20 | 1,000 | 00000000 | 0000 |
| 9/16" | 20 | 1,000 | 00000000 | 0000 |
Hammer Staplers
Drive staples as fast as you can swing these tools. Balanced for one-handed use, you can use them at arm’s length, overhead, or at floor level. They do not clinch the staples.
For Staple | ||||||||
|---|---|---|---|---|---|---|---|---|
| Wd. | Leg Lg. | Staple Capacity | Wt., lbs. | Lg. | Ht. | Material | Each | |
Back-End Load | ||||||||
| 3/8" | 5/16", 3/8", 7/16", 1/2" | 125 | 2 | 11" | 4" | Steel | 0000000 | 000000 |
| 15/32" | 3/8", 7/16", 1/2", 9/16" | 165 | 2 | 12" | 3 1/2" | Steel | 000000 | 00000 |
| 1/2" | 1/4", 5/16", 3/8" | 168 | 2 | 11 1/4" | 3" | Steel | 000000 | 00000 |
Bottom Load | ||||||||
| 3/8" | 1/4", 5/16", 3/8", 7/16", 1/2" | 150 | 3 | 13" | 2" | Steel | 000000 | 00000 |
| Replacement Feed Bar for 6009A8 | 0000000 | Each | 00000 |
Small Pack | Large Pack | |||||||
|---|---|---|---|---|---|---|---|---|
| Leg Lg. | Gauge | Pkg. Qty. | Pkg. | Gauge | Pkg. Qty. | Pkg. | ||
GalvanizedSteel | ||||||||
| 1/4" | __ | __ | 000000 | 00 | 16 | 5,000 | 000000000 | 000000 |
| 5/16" | __ | __ | 000000 | 00 | 16 | 5,000 | 000000000 | 00000 |
| 3/8" | __ | __ | 000000 | 00 | 16 | 5,000 | 000000000 | 00000 |
| 1/2" | __ | __ | 000000 | 00 | 16 | 5,000 | 000000000 | 00000 |
| 17/32" | __ | __ | 000000 | 00 | 16 | 5,000 | 000000000 | 00000 |
| 9/16" | __ | __ | 000000 | 00 | 16 | 5,000 | 000000000 | 00000 |
Steel | ||||||||
| 1/4" | 16 | 1,250 | 00000000 | 00000 | __ | __ | 000000 | 00 |
| 5/16" | 16 | 1,250 | 00000000 | 0000 | __ | __ | 000000 | 00 |
| 3/8" | 16 | 1,250 | 00000000 | 0000 | __ | __ | 000000 | 00 |
| 1/2" | 16 | 1,250 | 00000000 | 0000 | __ | __ | 000000 | 00 |
| 17/32" | 16 | 1,250 | 00000000 | 0000 | __ | __ | 000000 | 00 |
| 9/16" | 16 | 1,250 | 00000000 | 0000 | __ | __ | 000000 | 00 |
Stainless Steel | ||||||||
| 3/8" | 16 | 1,000 | 00000000 | 00000 | 16 | 5,000 | 000000000 | 00000 |
400 Nickel | ||||||||
| 1/4" | 16 | 1,000 | 00000000 | 00000 | __ | __ | 000000 | 00 |
| 5/16" | 16 | 1,000 | 00000000 | 00000 | __ | __ | 000000 | 00 |
| 3/8" | 16 | 1,000 | 00000000 | 00000 | __ | __ | 000000 | 00 |
| 1/2" | 16 | 1,000 | 00000000 | 00000 | __ | __ | 000000 | 00 |
Heavy Duty Inward-Clinch Manual Staplers
This stapler drives bigger staples than our standard inward-clinch manual stapler. It bends the legs of the staple inward for a more secure hold than a stapler that clinchs outward or does not clinch the staple.
Inward-Clinch Manual Staplers
This stapler bends the legs of the staple inward for a more secure hold than a stapler that clinches outward or does not clinch the staple.
Heavy Duty Inward-Clinch Manual Staplers with Spear Point
The spear point pierces the edges of corrugated containers to clinch the staple from inside. This stapler drives bigger staples than standard inward-clinch manual staplers. It bends the legs of the staple inward for a more secure hold than a stapler that clinches outward or does not clinch the staple.
Outward-Clinch Manual Staplers
This stapler bends the legs of the staple outward for a more secure hold than a stapler that does not clinch the staple. Outward-clinched staples are easier to remove than inward-clinched staples.
For Staple | |||||
|---|---|---|---|---|---|
| Wd. | Leg Lg. | Staple Capacity | Material | Each | |
| 3/8" | 1/4", 5/16", 3/8", 7/16", 1/2", 9/16" | 70 | Chrome-Plated Steel | 0000000 | 000000 |
Small Pack | Large Pack | ||||||
|---|---|---|---|---|---|---|---|
| Leg Lg. | Wire Gauge | Pkg. Qty. | Pkg. | Pkg. Qty. | Pkg. | ||
Galvanized Steel | |||||||
| 1/4" | 16 | 1,250 | 00000000 | 00000 | 5,000 | 000000000 | 000000 |
| 5/16" | 16 | 1,250 | 00000000 | 0000 | 5,000 | 000000000 | 00000 |
| 3/8" | 16 | 1,250 | 00000000 | 0000 | 5,000 | 000000000 | 00000 |
| 1/2" | 16 | 1,250 | 00000000 | 0000 | 5,000 | 000000000 | 00000 |
| 17/32" | 16 | 1,250 | 00000000 | 0000 | 5,000 | 000000000 | 00000 |
| 9/16" | 16 | 1,250 | 00000000 | 0000 | 5,000 | 000000000 | 00000 |
Stainless Steel | |||||||
| 3/8" | 16 | 1,000 | 00000000 | 00000 | 5,000 | 000000000 | 00000 |
400 Nickel | |||||||
| 1/4" | 16 | 1,000 | 00000000 | 00000 | __ | 000000 | 00 |
| 5/16" | 16 | 1,000 | 00000000 | 00000 | __ | 000000 | 00 |
| 3/8" | 16 | 1,000 | 00000000 | 00000 | __ | 000000 | 00 |
| 1/2" | 16 | 1,000 | 00000000 | 00000 | __ | 000000 | 00 |
Stapler/Brad Nailers
Drive staples or brad nails. Stapler does not clinch the staple.
For Staple | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Wd. | Leg Lg. | Staple Capacity | For Nail Lg. | Nail Capacity | For Nail Head Type | Housing Material | Magazine Material | Grip Material | Each | |
| 3/8" | 1/4", 5/16", 3/8", 7/16", 1/2", 9/16" | 120 | 5/8", 3/4", 1" | 100 | Brad | Steel | Steel | Rubber | 00000000 | 000000 |
Small Pack | Large Pack | |||||||
|---|---|---|---|---|---|---|---|---|
| Leg Lg. | Gauge | Pkg. Qty. | Pkg. | Gauge | Pkg. Qty. | Pkg. | ||
Galvanized Steel | ||||||||
| 1/4" | __ | __ | 000000 | 00 | 16 | 5,000 | 000000000 | 000000 |
| 5/16" | __ | __ | 000000 | 00 | 16 | 5,000 | 000000000 | 00000 |
| 3/8" | __ | __ | 000000 | 00 | 16 | 5,000 | 000000000 | 00000 |
| 1/2" | __ | __ | 000000 | 00 | 16 | 5,000 | 000000000 | 00000 |
| 17/32" | __ | __ | 000000 | 00 | 16 | 5,000 | 000000000 | 00000 |
| 9/16" | __ | __ | 000000 | 00 | 16 | 5,000 | 000000000 | 00000 |
Steel | ||||||||
| 1/4" | 16 | 1,250 | 00000000 | 00000 | __ | __ | 000000 | 00 |
| 5/16" | 16 | 1,250 | 00000000 | 0000 | __ | __ | 000000 | 00 |
| 3/8" | 16 | 1,250 | 00000000 | 0000 | __ | __ | 000000 | 00 |
| 1/2" | 16 | 1,250 | 00000000 | 0000 | __ | __ | 000000 | 00 |
| 17/32" | 16 | 1,250 | 00000000 | 0000 | __ | __ | 000000 | 00 |
| 9/16" | 16 | 1,250 | 00000000 | 0000 | __ | __ | 000000 | 00 |
Stainless Steel | ||||||||
| 3/8" | 16 | 1,000 | 00000000 | 00000 | 16 | 5,000 | 000000000 | 00000 |
400 Nickel | ||||||||
| 1/4" | 16 | 1,000 | 00000000 | 00000 | __ | __ | 000000 | 00 |
| 5/16" | 16 | 1,000 | 00000000 | 00000 | __ | __ | 000000 | 00 |
| 3/8" | 16 | 1,000 | 00000000 | 00000 | __ | __ | 000000 | 00 |
| 1/2" | 16 | 1,000 | 00000000 | 00000 | __ | __ | 000000 | 00 |
| Lg. | Shank Dia. | Nail Gauge | Head Type | Shank Type | Pkg. Qty. | Pkg. | |
Galvanized Steel | |||||||
|---|---|---|---|---|---|---|---|
| 5/8" | 0.05" | 18 ga. | Brad | Smooth | 1,000 | 00000000 | 00000 |
| 5/8" | 0.05" | 18 ga. | Brad | Smooth | 5,000 | 00000000 | 00000 |
| 3/4" | 0.05" | 18 ga. | Brad | Smooth | 1,000 | 00000000 | 0000 |
| 3/4" | 0.05" | 18 ga. | Brad | Smooth | 5,000 | 00000000 | 00000 |
| 1" | 0.05" | 18 ga. | Brad | Smooth | 1,000 | 00000000 | 0000 |
| 1" | 0.05" | 18 ga. | Brad | Smooth | 5,000 | 00000000 | 00000 |
316 Stainless Steel | |||||||
| 3/4" | 0.04" | 18 ga. | Brad | Smooth | 500 | 00000000 | 00000 |
| 1" | 0.04" | 18 ga. | Brad | Smooth | 500 | 00000000 | 00000 |
Wire and Cable Staplers for Insulated Staples
Use these staplers with building cable or round signal wire, such as data and communication wire. It does not clinch the staple. A grooved staple guide keeps staples from penetrating the wire or cable jacket.
| For Staple Wd. | For Wire OD | For Staple Leg Lg. | Staple Capacity | Grip Material | Each | |
| 5/16" | 5/16" | 1/4" | 30 | Rubber | 00000000 | 000000 |
| For Staple Wd. | For Wire Wd. | For Staple Leg Lg. | Staple Capacity | Grip Material | Each | |
| 5/16", 19/32" | 1/4", 1/2" | 11/16", 7/8" | 30 | Rubber | 0000000 | 000000 |
Wire and Cable Staplers for Curved Staples
This stapler is commonly used on round signal wire such as coaxial cable and telephone wire. It does not clinch the staple. A grooved staple guide keeps staples from penetrating the wire or cable jacket.
| For Staple Wd. | For Wire OD | For Staple Leg Lg. | Staple Capacity | Housing Material | Magazine Material | Grip Material | Each | |
| 5/16" | 1/4" | 3/8", 7/16", 1/2", 9/16" | 80 | Chrome-Plated Steel | Chrome-Plated Steel | Rubber | 0000000 | 000000 |