Filter by
Switch Designation
Switch Starting Position
Wire Connection
Manufacturer
For Switch Manufacturer
Export Control Classification Number (ECCN)
Specifications Met
DFARS Specialty Metals
Certification
CSA File Number
UL File Number
Electrical Connection
Choosing an Electrical Switch
More
Contact Blocks for Manual Switches
Make or break an electrical circuit. These contact blocks mount to manual switches and transmit an electrical signal when the switch actuator is engaged. You can stack multiple blocks, so a single switch can control several circuits. This is helpful in setups that require multiple systems to turn on or off at the same time. For example, the switch on a conveyor line could turn off the conveyor and turn on a diverter and alarm.
| No. of Circuits Controlled | Switch Starting Position | No. of Terminals | Industry Designation | Wire Connection Type | Environmental Rating | For Switch Manufacturer Series | Each | |
Schneider Electric | ||||||||
|---|---|---|---|---|---|---|---|---|
| 1 | 1 Off (Normally Open) | 2 | SPST-NO | Screw Terminals | IP20 | 9001K, 9001SK | 0000000 | 000000 |
| 1 | 1 On (Normally Closed) | 2 | SPST-NC | Screw Terminals | IP20 | XB5 | 0000000 | 00000 |
| 1 | 1 On (Normally Closed) | 2 | SPST-NC | Screw Terminals | IP20 | 9001K, 9001SK | 0000000 | 00000 |
| 2 | 1 Off (Normally Open) and 1 On (Normally Closed) | 4 | DPST-1NO/1NC | Screw Terminals | IP20 | 9001K, 9001SK | 0000000 | 00000 |