We will reply to your message within an hour.
More
A quick push is all it takes to actuate these switches.
A lightweight yet durable alternative to stainless steel enclosed switches, these aluminum enclosed switches withstand corrosion, oil, and washdowns.
Use these switches where ignitable gas and dust may be present. They're rated for use in hazardous locations.
Immediately cut power with a single push.
Mount these switches in an outlet box. Also known as palm-button switches, they have a large button that makes them easy to use even while wearing gloves.
These switches are protected from corrosion, high-temperature and high-pressure washdowns, and oil/coolant spraying. Install them in 22 mm dia. cutouts.
Use this switch for intermittent, light-duty applications.
Make or break an electrical circuit. These contact blocks mount to manual switches and transmit an electrical signal when the switch actuator is engaged.
Sized for 22 mm dia. panel cutouts, these switches require a key to turn circuits on or off, limiting access to sensitive equipment.
Immediately cut power by pulling the cable.
Flip a switch from here, there, or anywhere—these switches connect wirelessly to your phone or smart device.
With 45° flared tube fittings, these valves form a tight seal on metal tubing lines for natural gas, propane, and butane.
Install these low-profile valves in low-clearance pipelines for natural gas, propane, and butane.
For use in drinking water systems, these valves meet NSF/ANSI 61.
Attach a gauge to the side port on these valves to monitor pressure, temperature, and other measurements in your line. Use with water and air.
An easy-to-read flow-indicating handle shows the percentage the valve is open. These valves are for use with water, oil, inert gas, and steam.
Use these valves in general purpose applications such as those with water, oil, air, and inert gas.
Valves are for use with water, oil, air, inert gas, and steam. They gradually open and close to adjust and regulate flow.