The built-in contact block in these switches extends behind the panel half the depth of most other 22 mm switches, saving valuable space.

A single-piece construction prevents the contact block from separating from the actuator in high-vibration applications.

Actuate these switches with the push of a button. Their buttons are distinct colors to help you quickly spot switches without labels.

The face of these switches mounts flush against a panel, so they're easy to clean and hard to damage.

Use these switches where ignitable gas and dust may be present. Their contact blocks are UL listed for Class I, Division 2, Groups B, C, and D hazardous locations.

A protective plastic enclosure resists dents, chips, and cracks, so you can install these switches outside of panels.

Use these switches where ignitable gas and dust may be present. They're rated for use in hazardous locations.

These aluminum switches are rated NEMA 4, NEMA 13, and IP66 for protection from washdowns and oil/coolant spraying.

Immediately cut power with a single push.

Snap these switches onto your DIN rail to mount them. With a toggle switch and receptacle combined, you can actuate power and plug in devices from a single box.

Prevent accidental actuation from bumps or vibration—these switches require you to grip and twist the lever to turn the switch. The contact block and actuator are all one piece, so they won’t separate in high-vibration applications.

Rated NEMA 4, 13, and IP66, these metal switches are protected from washdowns and oil/coolant spraying. Install them in 30 mm dia. cutouts.

Made for areas where ignitable gas and vapor may be present, these switches have a housing that seals in anything that could spark flammable material.

Use these switches where ignitable gas, dust, and fibers may be present. They're UL and C-UL listed for hazardous locations.

These switches are rated for environments where hazardous material is present.

Rated NEMA 6P and IP68, these switches are protected against washdowns, corrosion, and temporary submersion.

Control equipment from up to 40 feet away—these switches include a transmitter and a receiver that connects to equipment.

Make or break an electrical circuit. These contact blocks mount to manual switches and transmit an electrical signal when the switch actuator is engaged.

Choose an actuator and contact block to make your own 22 mm metal switch.

Sized for 22 mm dia. panel cutouts, these switches require a key to turn circuits on or off, limiting access to sensitive equipment.

Rated NEMA 4 or IP66, these switches are protected from washdowns.

Designed for use near ignitable gases, fibers, and dust, these switches have a housing that seals in anything that could ignite flammable material. They require a key to turn circuits on or off, preventing accidental activation and limiting access.

Tug the hanging rope to actuate these switches.

Safe to use near ignitable gases and dust, the housing on these switches seals in anything that could ignite flammable material. Yank the cable anywhere along your line to quickly cut power in emergencies.

Immediately cut power by pulling the cable.

Control cranes and other mobile machinery in dirty, outdoor, and wet environments without damaging your switch.

With a slim shape, these switches fit comfortably in your hand.

Intuitively steer and position cranes, robot arms, and other machinery that moves in multiple directions—your equipment will follow the movements you make with these joysticks.

The light touch of a finger turns circuits on and off without pressing down a contact. Program these switches to fit your application—control their color, pattern, and sensitivity.

An infrared light beam senses the lightest finger contact to switch a circuit on or off.

Control lights by transmitting a wireless signal from these switches to a control relay on your fixture.

Also known as three-way switches, these are often used in large, open workspaces and can be wired on opposite ends of the room to control lights on the same circuit.

Combine a switch and receptacle into a single outlet box for a small footprint.

Switch lights on and off no matter the forecast.

Your standard light switches—these switches stick out of your mounting surface and flip on and off.

Control multiple lights in the same footprint a standard light switch fits in.

Secure sensitive lighting equipment; these switches have a round key that is difficult to duplicate.

Often used in large, open workspaces, these switches can be wired on opposite ends of the room to control the brightness of lights on the same circuit. They're also known as three-way switches.

Designed to mount on an electrical enclosure, these switches control motors, lighting, and electric heat circuits.

Safely turn motors on and off near ignitable gases and dust—the housing on these switches seals in anything that could ignite flammable material.

Start and stop motors outdoors and in other wet environments.

Rated NEMA 4, these switches are protected from washdowns.

Operated by hand, these starters are more compact than electrically actuated motor starters; use them when multiple motor circuits are housed in one panel.

Rated NEMA 4X, these enclosed starters are protected from corrosion and washdowns.

Housed in a durable steel enclosure.

The NEMA 4X rated enclosure protects these starters from corrosion and washdowns.

Prevent changes in frequency from damaging sensitive equipment.

Match these circuit breakers to Square D breaker boxes or panel boards of the same manufacturer series.

An electronic trip mechanism makes these circuit breakers fast, precise, and consistent. They continuously monitor current and trip at a precise value compared to the much wider current range in traditional thermal-magnetic breakers.

Protect an area of a facility that has high-powered equipment using up to 600V AC or 750V DC and 600A of current.

With 45° flared tube fittings, these valves form a tight seal on metal tubing lines for natural gas, propane, and butane.

A low-profile handle allows these valves to fit in low-clearance pipelines for diesel fuel, fuel oil, and kerosene.

Attach a gauge to the side port on these valves to monitor pressure, temperature, and other measurements in your line. Use with water and air.

Use these valves in general purpose applications such as those with water, oil, air, and inert gas.

FM-approved for fire suppression and protection, these valves can isolate sections of the water supply in your facility.

Use these valves for boiler maintenance and other low-pressure plumbing applications. They're for use with water. All gradually open and close to adjust and regulate flow.

Check that your HVAC smoke detector is working properly. Wire these test stations to your smoke detector controller to test difficult to access smoke detectors from a convenient location.