Simple to use, these switches actuate with a quick push.

The built-in contact block in these switches extends behind the panel half the depth of most other 22 mm switches, saving valuable space.

Install in 16 mm dia. cutouts.

Install in 8 mm dia. cutouts.

These aluminum switches are rated NEMA 4, NEMA 13, and IP66 for protection from washdowns and oil/coolant spraying.

Clip these switches onto nearby structures made from T-slotted framing to quickly cut power with the push of a button.

These switches meet MIL-S-3950.

Prevent accidental actuation—these toggle switches must be pulled up before they can switch a circuit.

Built into a terminal block, these switches mount to DIN rail.

Maximize space in a panel—these switches are smaller than most standard rocker switches.

Able to withstand high currents, these switches are often used with motors and pumps.

The wide surface of these switches makes them easy to press on and off, even if your hands are full and you need to use an elbow.

These switches are protected from corrosion, high-temperature and high-pressure washdowns, and oil/coolant spraying. Install them in 22 mm dia. cutouts.

Made for areas where ignitable gas and vapor may be present, these switches have a housing that seals in anything that could spark flammable material.

Avoid accidental actuation—these switches won’t turn on or off until you grip and twist the lever. Install in a 16 mm dia. cutout.

Apply pressure from any direction to actuate these switches.

Use this switch for intermittent, light-duty applications.

Choose an actuator and contact block to make your own 22 mm plastic switch.

Choose an actuator and contact block to make your own 22 mm metal switch.

Sized for 22 mm dia. panel cutouts, these switches require a key to turn circuits on or off, limiting access to sensitive equipment.

Install these key switches in 3/4" dia. panel cutouts. They require a key to turn circuits on or off, limiting access to sensitive equipment.

Maximize space in a panel with these miniature switches.

Intuitively steer and position cranes, robot arms, and other machinery that moves in multiple directions—your equipment will follow the movements you make with these joysticks.

Made with stainless steel conductors, these switches resist corrosion in damp areas. They’re less than 1/4” thick, so they’ll fit under floor mats and in other tight spaces.

Prevent personnel from getting too close to dangerous equipment while it’s running. Step anywhere on these mats and they can turn on warning lights and alarms or shut down equipment.

Customize the length of these switches by cutting them from a 50-foot roll.

These mats fit under carpeting or anywhere else you want to hide them.

The NEMA 4X rated enclosure protects these starters from corrosion and washdowns.

Protect electrical equipment from overcurrent and undercurrent damage—these relays continuously monitor current flow.

Unlike breakers that trip thermally, these breakers have a hydraulic-magnetic trip mechanism, so they aren’t affected by changes in temperature.

Built to resist vibration and corrosion in harsh environments, these circuit breakers protect against overload and short circuits in low-voltage automotive and other electronic applications.