Choosing an Electrical Switch
More
Metal 22 mm Panel-Mount Push-Button Switches
Simple to use, these switches actuate with a quick push. They mount in a standard panel cutout diameter. Switches include enough contact blocks to control the number of circuits listed. Color code your switches by choosing a different actuator color for each.
NEMA or IP rated, all switches protect against dust. NEMA 4, IP65, and IP66 rated switches seal out water from washdowns.
For technical drawings and 3-D models, click on a part number.
| No. of Circuits Controlled | Switch Starting Position | Switch Action | No. of Terminals | Industry Designation | Switching Current @ Voltage | Dia. | For Max. No. of Contact Blocks | Actuator Color | Environmental Rating | Each | |
Round with Quick-Disconnect Terminals— (250V AC/250V DC Max. Voltage) | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
Flush | |||||||||||
| 1 | 1 Off (Normally Open) | Springs Back (Momentary) | 2 | SPST-NO | 2.5 A @ 125 V AC, 0.15 A @ 250 V DC | 1" | 3 | Black | IP65 | 00000000 | 000000 |
| 1 | 1 Off (Normally Open) | Stays Switched (Maintained) | 2 | SPST-NO | 2.5 A @ 125 V AC, 0.15 A @ 250 V DC | 1" | 3 | Black | IP65 | 00000000 | 00000 |
| 1 | 1 On (Normally Closed) | Springs Back (Momentary) | 2 | SPST-NC | 2.5 A @ 125 V AC, 0.15 A @ 250 V DC | 1" | 3 | Black | IP65 | 00000000 | 00000 |
| 1 | 1 On (Normally Closed) | Stays Switched (Maintained) | 2 | SPST-NC | 2.5 A @ 125 V AC, 0.15 A @ 250 V DC | 1" | 3 | Black | IP65 | 00000000 | 00000 |
| 2 | 1 Off (Normally Open) and 1 On (Normally Closed) | Springs Back (Momentary) | 4 | DPST-1NO/1NC | 2.5 A @ 125 V AC, 0.15 A @ 250 V DC | 1" | 3 | Black | IP65 | 00000000 | 00000 |
Make or break an electrical circuit. These contact blocks mount to manual switches and transmit an electrical signal when the switch actuator is engaged. You can stack multiple blocks, so a single switch can control several circuits. This is helpful in setups that require multiple systems to turn on or off at the same time. For example, the switch on a conveyor line could turn off the conveyor and turn on a diverter and alarm.
| Each | ||
| 00000000 | 000000 |
Contact Blocks for Manual Switches
Make or break an electrical circuit. These contact blocks mount to manual switches and transmit an electrical signal when the switch actuator is engaged. You can stack multiple blocks, so a single switch can control several circuits. This is helpful in setups that require multiple systems to turn on or off at the same time. For example, the switch on a conveyor line could turn off the conveyor and turn on a diverter and alarm.
For technical drawings and 3-D models, click on a part number.
| No. of Circuits Controlled | Switch Starting Position | No. of Terminals | Industry Designation | Wire Connection Type | For Switch Manufacturer Series | Each | |
EAO | |||||||
|---|---|---|---|---|---|---|---|
| 1 | 1 Off (Normally Open) | 2 | SPST-NO | Quick-Disconnect Terminals | 61 | 0000000 | 000000 |
| 1 | 1 On (Normally Closed) | 2 | SPST-NC | Quick-Disconnect Terminals | 61 | 0000000 | 00000 |
| 2 | 1 Off (Normally Open) and 1 On (Normally Closed) | 4 | DPST-1NO/1NC | Quick-Disconnect Terminals | 61 | 0000000 | 00000 |