Switches immediately cut power with a single push. Use these switches where ignitable gas and dust may be present. Their contact blocks are explosion proof and UL listed for Class I, Division 2, Groups B, C, and D hazardous locations. All are rated NEMA 4X and IP65 for protection from corrosion and washdowns. They include enough contact blocks to control the number of circuits listed.

Additional contact blocks (sold separately) can be added to control more circuits, or replace the included contact block.

For technical drawings and 3-D models, click on a part number.

A lightweight yet durable alternative to stainless steel enclosed switches, these aluminum enclosed switches withstand corrosion, oil, and washdowns. They can mount directly to a wall when there’s not enough room in an electrical panel. The enclosure has knockouts so you can easily connect it to conduit fittings and cord grips.

For technical drawings and 3-D models, click on a part number.

Use these switches where ignitable gas and dust may be present. They're rated for use in hazardous locations.

For technical drawings and 3-D models, click on a part number.

Made for areas where ignitable gas and vapor may be present, these switches have a housing that seals in anything that could spark flammable material. You'll know they're safe because they're NEC Class 1, Division 2, Groups A, B, C, and D certified for hazardous locations. They're also UL and C-UL listed and CSA certified. They require you to grip and twist a lever to turn them on or off, so they won’t accidentally actuate if you bump into them. Mount into a standard panel cutout.

Additional contact blocks (sold separately) can be added to control more circuits, or to replace the included contact block.

For technical drawings and 3-D models, click on a part number.

Use these switches where ignitable gas, dust, and fibers may be present. They're UL and C-UL listed for hazardous locations.

For technical drawings and 3-D models, click on a part number.

These switches are rated for environments where hazardous material is present. Press the pedal with your foot for hands-free operation. They have an oversized guard that accommodates bulky footwear.

Hazardous location environmental ratings indicate whether manufacturers have included safety features in products to facilitate their safe use in a hazardous environment. Before selecting a product for a hazardous location, ensure it is rated for your environment. See About Hazardous Location Environmental Ratings.

Designed for use near ignitable gases, fibers, and dust, these switches have a housing that seals in anything that could ignite flammable material. You’ll know they’re safe because they’re NEC Class 1, Division 2 Groups A-D and NEC Zone 1 Groups IIC-IIA certified for hazardous locations. These switches require a key to turn circuits on or off, preventing accidental actuation and limiting access to sensitive equipment. Since they’re keyed alike, all open with the same key. Install them in a standard panel cutout.

Switches that control two circuits come with a contact block for each circuit.

Additional contact blocks (sold separately) can be added to control more circuits, or to replace the included contact block.

For technical drawings and 3-D models, click on a part number.

Safe to use near ignitable gases and dust, the housing on these switches seals in anything that could ignite flammable material. All are UL listed and CSA certified for use in hazardous locations. Yank the cable anywhere along your line to quickly cut power in emergencies. They have positive-force, snap-open contacts that open a circuit when actuated, even if a spring fails or the contacts stick. The contacts will remain open until you tension the cable and reset the switch. Use the tension indicator to visually confirm that they’re reset correctly.

For technical drawings and 3-D models, click on a part number.