About Precision Flow-Adjustment Valves
More
About On/Off Valves
More
Choosing an Electrical Switch
More
Sanitary Finger-Touch Switches
With just a light touch, these switches turn circuits on and off in sanitary areas—even when you're wearing gloves. They're ideal for environments that require frequent cleaning, such as food and pharmaceutical plants. Their smooth, crevice-free surfaces are easy to clean and prevent bacteria buildup. Rated IP69K, they withstand high-pressure, high-temperature washdowns. They help you comply with European Hygienic Engineering and Design Group (EHEDG) sanitary standards.
These switches use IO Link, so you can change settings, view outputs, and receive error messages from a connected programmable logic controller (PLC) or computer. Commonly used on production lines, they alert your team to equipment issues as soon as they occur.
Message Color | Light Color | Wire Leads | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Message (Actuator Color) | When Off | When On | When Off | When On | Switch Starting Position | Switch Action | Signal Output Type | Current Output, mA | Input Voltage Range  | Dp. Behind Panel | No. of | Lg. | Communication Protocol | Dia. | Ht. | Environmental Rating | Each | |
316L Stainless Steel Base with Wire Leads | ||||||||||||||||||
For 22 mm Panel Cutout Dia. | ||||||||||||||||||
| Blank (White) | __ | __ | Green | Red | 1 Off (Normally Open), 1 On (Normally Closed) | Springs Back (Momentary), Stays Switched (Maintained) | PNP/NPN | 200 | 8.4V DC-32V DC | 0.65" | 5 | 7 1/2" | IO Link | 1 1/4" | 5/32" | IP69K | 0000000 | 000000 |
316L Stainless Steel Base with 5-Pole Micro M12 Plug | ||||||||||||||||||
For 22 mm Panel Cutout Dia. | ||||||||||||||||||
| Blank (White) | __ | __ | Green | Red | 1 Off (Normally Open), 1 On (Normally Closed) | Springs Back (Momentary), Stays Switched (Maintained) | PNP/NPN | 200 | 8.4V DC-32V DC | 1.02" | __ | __ | IO Link | 1 1/4" | 5/32" | IP69K | 0000000 | 00000 |
| On/Off (White) | Green/Red | Green/Red | Green | Red | 1 Off (Normally Open), 1 On (Normally Closed) | Springs Back (Momentary), Stays Switched (Maintained) | PNP/NPN | 200 | 8.4V DC-32V DC | 1.02" | __ | __ | IO Link | 1 1/4" | 5/32" | IP69K | 0000000 | 00000 |
| Power Symbol (Black) | Green | Red | Green | Red | 1 Off (Normally Open), 1 On (Normally Closed) | Springs Back (Momentary), Stays Switched (Maintained) | PNP/NPN | 200 | 8.4V DC-32V DC | 1.02" | __ | __ | IO Link | 1 1/4" | 5/32" | IP69K | 0000000 | 00000 |
| Power Symbol (White) | Black | Black | Green | Red | 1 Off (Normally Open), 1 On (Normally Closed) | Springs Back (Momentary), Stays Switched (Maintained) | PNP/NPN | 200 | 8.4V DC-32V DC | 1.02" | __ | __ | IO Link | 1 1/4" | 5/32" | IP69K | 0000000 | 00000 |
| Start (Black) | Green | Red | Green | Red | 1 Off (Normally Open), 1 On (Normally Closed) | Springs Back (Momentary), Stays Switched (Maintained) | PNP/NPN | 200 | 8.4V DC-32V DC | 1.02" | __ | __ | IO Link | 1 1/4" | 5/32" | IP69K | 0000000 | 00000 |
| Start (White) | Black | Black | Green | Red | 1 Off (Normally Open), 1 On (Normally Closed) | Springs Back (Momentary), Stays Switched (Maintained) | PNP/NPN | 200 | 8.4V DC-32V DC | 1.02" | __ | __ | IO Link | 1 1/4" | 5/32" | IP69K | 0000000 | 00000 |
| Start (White) | Green | Green | Green | Red | 1 Off (Normally Open), 1 On (Normally Closed) | Springs Back (Momentary), Stays Switched (Maintained) | PNP/NPN | 200 | 8.4V DC-32V DC | 1.02" | __ | __ | IO Link | 1 1/4" | 5/32" | IP69K | 0000000 | 00000 |
| Stop (Black) | Red | Green | Red | Green | 1 Off (Normally Open), 1 On (Normally Closed) | Springs Back (Momentary), Stays Switched (Maintained) | PNP/NPN | 200 | 8.4V DC-32V DC | 1.02" | __ | __ | IO Link | 1 1/4" | 5/32" | IP69K | 0000000 | 00000 |
| Stop (White) | Red | Red | Red | Green | 1 Off (Normally Open), 1 On (Normally Closed) | Springs Back (Momentary), Stays Switched (Maintained) | PNP/NPN | 200 | 8.4V DC-32V DC | 1.02" | __ | __ | IO Link | 1 1/4" | 5/32" | IP69K | 0000000 | 00000 |
Precision Flow-Adjustment Valves with Sanitary
Quick-Clamp Fittings for Food and Beverage
- Valve Type: Diaphragm
- For Use With: Food, Beverage
- Seal Material: EPDM Rubber, PTFE Plastic
- Specifications Met: DIN 32676, FDA Compliant 21 CFR 177.1550, FDA Compliant 21 CFR 177.2600, ISO 2852
To maintain sanitary standards in food, beverage, and dairy systems that require frequent cleaning, these valves are FDA compliant for direct food contact. Electropolished to a 20 Ra finish, they have smooth internal surfaces that prevent product buildup and inhibit bacteria growth. All have sanitary quick-clamp fittings for easy disassembly. Turn the handle to adjust flow in small increments for metering, sampling, and other applications requiring fine flow control. Valves have a 316L stainless steel body for excellent corrosion resistance. They have metal-to-metal seats that resist temperature fluctuations.
Flow coefficient (Cv) is the amount of water (in gallons per minute) at 60° F that will flow through a fully open valve with a difference of 1 psi between the inlet and the outlet.
| For Tube OD | Flange OD | Flow Coefficient (Cv) | Max. Pressure | Temperature Range, °F | End-to-End Lg. | Interior Smoothness, Ra | Each | |
316L Stainless Steel Body | ||||||||
|---|---|---|---|---|---|---|---|---|
Quick Clamp × Quick Clamp | ||||||||
| 1/4" | 0.984" | 0.8 | 150 psi @ 265° F | 15° to 265° | 2 9/16" | 20 | 000000 | 0000000 |
| 3/8" | 0.984" | 2.1 | 150 psi @ 265° F | 15° to 265° | 3 1/2" | 20 | 000000 | 000000 |
| 1/2" | 0.984" | 3.6 | 150 psi @ 265° F | 15° to 265° | 3 1/2" | 20 | 000000 | 00000000 |
| 3/4" | 0.984" | 9.9 | 150 psi @ 265° F | 15° to 265° | 4" | 20 | 000000 | 00000000 |
| 1" | 1.984" | 16.9 | 150 psi @ 265° F | 15° to 265° | 4 1/2" | 20 | 000000 | 00000000 |
| 1 1/2" | 1.984" | 43.7 | 150 psi @ 265° F | 15° to 265° | 5 1/2" | 20 | 000000 | 00000000 |
| 2" | 2.516" | 76.9 | 150 psi @ 265° F | 15° to 265° | 6 1/4" | 20 | 000000 | 00000000 |
Flow-Adjustment Valves with Sanitary
Quick-Clamp Fittings for Food and Beverage
- Valve Type: Butterfly
- For Use With: Food, Beverage
To maintain sanitary standards in food and beverage applications, these valves have internal surfaces that prevent product buildup and inhibit bacteria growth. All have sanitary quick-clamp fittings for easy disassembly in systems that require frequent cleaning. They gradually open and close to adjust and regulate flow.
304 stainless steel valves have good corrosion resistance.
316 stainless steel valves have the best corrosion resistance.
Lever handles have 4 flow-adjustment positions.
Lockable lever handles have 12 flow-adjustment positions. The handle can be fixed in place using a padlock (not included) with a shackle diameter up to 1/4”.
Silicone seats have some resistance to organic food acids and fats and oils.
EPDM seats have good resistance to organic food acids. They have poor resistance to fats and oils.
Fluoroelastomer seats have excellent resistance to many food-processing chemicals and good resistance to organic food acids and fats and oils.
Flow coefficient (Cv) is the amount of water (in gallons per minute) at 60° F that will flow through a fully open valve with a difference of 1 psi between the inlet and the outlet.
Lever Handle | Lockable Lever Handle | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Tube OD | Flange OD | Flow Coefficient (Cv) | Max. Pressure | Temperature Range, °F | End-to-End Lg. | O'all Ht. | O'all Lg. | Each | O'all Ht. | O'all Lg. | For Max. Shackle Dia. | Each | ||
304 Stainless Steel Body—Silicone Rubber Seat (FDA Compliant 21 CFR 177.2600) | ||||||||||||||
Quick Clamp × Quick Clamp | ||||||||||||||
| 1" | 2" | 27 | 145 psi @ 72° F | -80° to 450° | 2 11/16" | 5 3/8" | 7 15/16" | 00000000 | 0000000 | 5 1/16" | 8 1/16" | 1/4" | 00000000 | 0000000 |
| 1 1/2" | 2" | 92 | 145 psi @ 72° F | -80° to 450° | 3" | 5 5/8" | 8 1/8" | 00000000 | 000000 | 5 1/4" | 8 3/16" | 1/4" | 00000000 | 000000 |
| 2" | 2 33/64" | 248 | 145 psi @ 72° F | -80° to 450° | 3 1/8" | 6 3/8" | 8 3/16" | 00000000 | 000000 | 6 1/16" | 8 9/16" | 1/4" | 00000000 | 000000 |
| 2 1/2" | 3 1/16" | 287 | 145 psi @ 72° F | -80° to 450° | 3 1/8" | 6 11/16" | 8 3/16" | 00000000 | 000000 | __ | __ | __ | 000000 | 00 |
| 3" | 3 9/16" | 411 | 145 psi @ 72° F | -80° to 450° | 3 1/4" | 7 3/16" | 8 1/4" | 00000000 | 000000 | 6 13/16" | 8 15/16" | 1/4" | 00000000 | 000000 |
| 4" | 4 11/16" | 880 | 145 psi @ 72° F | -80° to 450° | 3 1/2" | 8 7/16" | 8 3/8" | 00000000 | 000000 | 8 1/8" | 9 5/8" | 1/4" | 00000000 | 000000 |
304 Stainless Steel Body—EPDM Rubber Seat (FDA Compliant 21 CFR 177.2600) | ||||||||||||||
Quick Clamp × Quick Clamp | ||||||||||||||
| 1" | 2" | 27 | 145 psi @ 72° F | -20° to 300° | 2 11/16" | 5 3/8" | 7 15/16" | 000000000 | 000000 | 5 1/16" | 8 1/16" | 1/4" | 00000000 | 000000 |
| 1 1/2" | 2" | 92 | 145 psi @ 72° F | -20° to 300° | 3" | 5 5/8" | 8 1/8" | 000000000 | 000000 | 5 1/4" | 8 3/16" | 1/4" | 00000000 | 000000 |
| 2" | 2 33/64" | 248 | 145 psi @ 72° F | -20° to 300° | 3 1/8" | 6 3/8" | 8 3/16" | 000000000 | 000000 | 6 1/16" | 8 9/16" | 1/4" | 00000000 | 000000 |
| 2 1/2" | 3 1/16" | 287 | 145 psi @ 72° F | -20° to 300° | 3 1/8" | 6 11/16" | 8 3/16" | 000000000 | 000000 | __ | __ | __ | 000000 | 00 |
| 3" | 3 9/16" | 411 | 145 psi @ 72° F | -20° to 300° | 3 1/4" | 7 3/16" | 8 1/4" | 000000000 | 000000 | 6 13/16" | 8 15/16" | 1/4" | 00000000 | 000000 |
| 4" | 4 11/16" | 880 | 145 psi @ 72° F | -20° to 300° | 3 1/2" | 8 7/16" | 8 3/8" | 000000000 | 000000 | 8 1/8" | 9 5/8" | 1/4" | 00000000 | 000000 |
304 Stainless Steel Body—Fluoroelastomer Rubber Seat (FDA Compliant 21 CFR 177.2600) | ||||||||||||||
Quick Clamp × Quick Clamp | ||||||||||||||
| 1" | 2" | 27 | 145 psi @ 72° F | -20° to 400° | 2 11/16" | 5 3/8" | 7 15/16" | 00000000 | 000000 | 5 1/16" | 8 1/16" | 1/4" | 00000000 | 000000 |
| 1 1/2" | 2" | 92 | 145 psi @ 72° F | -20° to 400° | 3" | 5 5/8" | 8 1/8" | 00000000 | 000000 | 5 1/4" | 8 3/16" | 1/4" | 00000000 | 000000 |
| 2" | 2 33/64" | 248 | 145 psi @ 72° F | -20° to 400° | 3 1/8" | 6 3/8" | 8 3/16" | 00000000 | 000000 | 6 1/16" | 8 9/16" | 1/4" | 00000000 | 000000 |
| 2 1/2" | 3 1/16" | 287 | 145 psi @ 72° F | -20° to 400° | 3 1/8" | 6 11/16" | 8 3/16" | 00000000 | 000000 | __ | __ | __ | 000000 | 00 |
| 3" | 3 9/16" | 411 | 145 psi @ 72° F | -20° to 400° | 3 1/4" | 7 3/16" | 8 1/4" | 00000000 | 000000 | 6 13/16" | 8 15/16" | 1/4" | 00000000 | 000000 |
| 4" | 4 11/16" | 880 | 145 psi @ 72° F | -20° to 400° | 3 1/2" | 8 7/16" | 8 3/8" | 00000000 | 000000 | 8 1/8" | 9 5/8" | 1/4" | 00000000 | 000000 |
316 Stainless Steel Body—Silicone Rubber Seat (FDA Compliant 21 CFR 177.2600) | ||||||||||||||
Quick Clamp × Quick Clamp | ||||||||||||||
| 1" | 2" | 27 | 145 psi @ 72° F | -80° to 450° | 2 11/16" | 5 3/8" | 8 11/16" | 0000000 | 000000 | 5 1/16" | 8 1/16" | 1/4" | 00000000 | 000000 |
| 1 1/2" | 2" | 92 | 145 psi @ 72° F | -80° to 450° | 3" | 5 5/8" | 8 5/8" | 0000000 | 000000 | 5 1/4" | 8 3/16" | 1/4" | 00000000 | 000000 |
| 2" | 2 33/64" | 248 | 145 psi @ 72° F | -80° to 450° | 3 1/8" | 6 3/8" | 9" | 0000000 | 000000 | 6 1/16" | 8 9/16" | 1/4" | 00000000 | 000000 |
| 2 1/2" | 3 1/16" | 287 | 145 psi @ 72° F | -80° to 450° | 3 1/8" | 6 11/16" | 9 3/16" | 0000000 | 000000 | __ | __ | __ | 000000 | 00 |
| 3" | 3 9/16" | 411 | 145 psi @ 72° F | -80° to 450° | 3 1/4" | 7 3/16" | 9 1/2" | 0000000 | 000000 | 6 13/16" | 8 15/16" | 1/4" | 00000000 | 000000 |
| 4" | 4 11/16" | 880 | 145 psi @ 72° F | -80° to 450° | 3 1/2" | 8 7/16" | 10 1/16" | 0000000 | 000000 | 8 1/8" | 9 5/8" | 1/4" | 00000000 | 000000 |
316 Stainless Steel Body—EPDM Rubber Seat (FDA Compliant 21 CFR 177.2600) | ||||||||||||||
Quick Clamp × Quick Clamp | ||||||||||||||
| 1" | 2" | 27 | 145 psi @ 72° F | -20° to 300° | 2 11/16" | 5 3/8" | 8 11/16" | 00000000 | 000000 | 5 1/16" | 8 1/16" | 1/4" | 00000000 | 000000 |
| 1 1/2" | 2" | 92 | 145 psi @ 72° F | -20° to 300° | 3" | 5 5/8" | 8 5/8" | 00000000 | 000000 | 5 1/4" | 8 3/16" | 1/4" | 00000000 | 000000 |
| 2" | 2 33/64" | 248 | 145 psi @ 72° F | -20° to 300° | 3 1/8" | 6 3/8" | 9" | 00000000 | 000000 | 6 1/16" | 8 9/16" | 1/4" | 00000000 | 000000 |
| 2 1/2" | 3 1/16" | 287 | 145 psi @ 72° F | -20° to 300° | 3 1/8" | 6 11/16" | 9 3/16" | 00000000 | 000000 | __ | __ | __ | 000000 | 00 |
| 3" | 3 9/16" | 411 | 145 psi @ 72° F | -20° to 300° | 3 1/4" | 7 3/16" | 9 1/2" | 00000000 | 000000 | 6 13/16" | 8 15/16" | 1/4" | 00000000 | 000000 |
| 4" | 4 11/16" | 880 | 145 psi @ 72° F | -20° to 300° | 3 1/2" | 8 7/16" | 10 1/16" | 00000000 | 000000 | 8 1/8" | 9 5/8" | 1/4" | 00000000 | 000000 |
316 Stainless Steel Body—Fluoroelastomer Rubber Seat (FDA Compliant 21 CFR 177.2600) | ||||||||||||||
Quick Clamp × Quick Clamp | ||||||||||||||
| 1" | 2" | 27 | 145 psi @ 72° F | -20° to 400° | 2 11/16" | 5 3/8" | 8 11/16" | 0000000 | 000000 | 5 1/16" | 8 1/16" | 1/4" | 00000000 | 000000 |
| 1 1/2" | 2" | 92 | 145 psi @ 72° F | -20° to 400° | 3" | 5 5/8" | 8 5/8" | 0000000 | 000000 | 5 1/4" | 8 3/16" | 1/4" | 00000000 | 000000 |
| 2" | 2 33/64" | 248 | 145 psi @ 72° F | -20° to 400° | 3 1/8" | 6 3/8" | 9" | 0000000 | 000000 | 6 1/16" | 8 9/16" | 1/4" | 00000000 | 000000 |
| 2 1/2" | 3 1/16" | 287 | 145 psi @ 72° F | -20° to 400° | 3 1/8" | 6 11/16" | 9 3/16" | 0000000 | 000000 | __ | __ | __ | 000000 | 00 |
| 3" | 3 9/16" | 411 | 145 psi @ 72° F | -20° to 400° | 3 1/4" | 7 3/16" | 9 1/2" | 0000000 | 000000 | 6 13/16" | 8 15/16" | 1/4" | 00000000 | 000000 |
| 4" | 4 11/16" | 880 | 145 psi @ 72° F | -20° to 400° | 3 1/2" | 8 7/16" | 10 1/16" | 0000000 | 000000 | 8 1/8" | 9 5/8" | 1/4" | 00000000 | 000000 |
| Material | Each | |
| PTFE Plastic | 00000000 | 00000 |
| For Tube OD | Each | |
Silicone Rubber | ||
|---|---|---|
| 1" | 0000000 | 000000 |
| 1 1/2" | 0000000 | 00000 |
| 2" | 0000000 | 00000 |
| 2 1/2" | 0000000 | 00000 |
| 3" | 0000000 | 00000 |
| 4" | 0000000 | 00000 |
EPDM Rubber | ||
| 1" | 0000000 | 00000 |
| 1 1/2" | 0000000 | 00000 |
| 2" | 0000000 | 00000 |
| 2 1/2" | 0000000 | 00000 |
| 3" | 0000000 | 00000 |
| 4" | 0000000 | 00000 |
Fluoroelastomer Rubber | ||
| 1" | 0000000 | 00000 |
| 1 1/2" | 0000000 | 00000 |
| 2" | 0000000 | 00000 |
| 2 1/2" | 0000000 | 000000 |
| 3" | 0000000 | 000000 |
| 4" | 0000000 | 000000 |
On/Off Valves with Barbed Fittings for Food and Beverage
- Valve Type: Ball
- For Use With: Food, Beverage
- Seal Material: See table
- Specifications Met: See table
To prevent leaks, these valves have barbed fittings that grip onto tubing to create a strong hold. They meet NSF/ANSI standards or are FDA compliant for use with food. All are full port, so they do not restrict flow.
Polypropylene valves also meet NSF/ANSI 61, so they’re safe to use in drinking water systems.
Flow coefficient (Cv) is the amount of water (in gallons per minute) at 60° F that will flow through a fully open valve with a difference of 1 psi between the inlet and the outlet.
| Pipe Size | For Tube ID | Flow Coefficient (Cv) | Max. Pressure | Temperature Range, °F | Seal Material | End-to-End Lg. | Specifications Met | Each | |
White Polypropylene Plastic Body | |||||||||
|---|---|---|---|---|---|---|---|---|---|
NPT Male × Barbed | |||||||||
| 1/4 | 1/4" | Not Rated | 125 psi @ 225° F | 0° to 210° | EPDM Rubber | 2 13/16" | NSF/ANSI 61, FDA Compliant 21 CFR 177.1520, FDA Compliant 21 CFR 177.1655, FDA Compliant 21 CFR 177.2600 | 0000000 | 00000 |
Barbed × Barbed | |||||||||
| __ | 1/4" | Not Rated | 125 psi @ 225° F | 0° to 210° | EPDM Rubber | 2 15/16" | NSF/ANSI 61, FDA Compliant 21 CFR 177.1520, FDA Compliant 21 CFR 177.1655, FDA Compliant 21 CFR 177.2600 | 0000000 | 0000 |
On/Off Valves with Compression Fittings for Food and Beverage
- Valve Type: Ball
- For Use With: Food, Beverage
- Seal Material: Buna-N Rubber
- Specifications Met: FDA Compliant 21 CFR 177.1520, FDA Compliant 21 CFR 177.1655, FDA Compliant 21 CFR 177.2600
Control flow in lines where preventing leaks is critical, such as bottling lines. These valves have a compression sleeve that bites into tubing as you tighten the nut. They’re more secure than push-to-connect fittings. However, they’re more difficult to remove, so avoid using them in lines that require frequent disassembly. These valves are FDA compliant for direct contact with food. Made from polypropylene, they are hard and slippery to keep food from sticking. These valves resist chemicals and can handle harsh cleaners used in food equipment. They're full port valves, so they don't restrict flow.
| For Tube OD | Pipe Size | Max. Pressure | Temperature Range, °F | End-to-End Lg. | Each | |
White Polypropylene Plastic Body | ||||||
|---|---|---|---|---|---|---|
Compression × Compression | ||||||
| 1/4" | __ | 150 psi @ 75° F | 35° to 200° | 2 15/16" | 0000000 | 00000 |
| 3/8" | __ | 150 psi @ 75° F | 35° to 200° | 3 3/16" | 0000000 | 0000 |
Compression × NPTF Female | ||||||
| 1/4" | 1/4 | 150 psi @ 75° F | 35° to 200° | 2 13/16" | 0000000 | 0000 |
| 3/8" | 3/8 | 150 psi @ 75° F | 35° to 200° | 2 15/16" | 0000000 | 0000 |
Compression × NPTF Male | ||||||
| 1/4" | 1/4 | 150 psi @ 75° F | 35° to 200° | 2 13/16" | 0000000 | 0000 |
| 3/8" | 3/8 | 150 psi @ 75° F | 35° to 200° | 2 15/16" | 0000000 | 0000 |
On/Off Valves with Push-to-Connect Fittings for Food and Beverage
Push tubing into the fittings on these valves and an internal gripping ring and O-ring hold it tight—no heat, solder, or flux required. These valves meet either NSF/ANSI standards or are FDA compliant for use with food. They also meet NSF/ANSI 61, so they’re safe to use with drinking water.
Polypropylene valves are flexible and can accommodate movement and vibration in your line without cracking.
Valves with a tube stem insert into the push-to-connect end of another fitting in place of a length of tubing. They’re good for tight spaces where a length of tube won’t fit.
Full-port valves do not restrict flow.
- Valve Type: Ball
- For Use With: Food, Beverage
- Seal Material: EPDM Rubber
- Specifications Met: See table
For Tube | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| OD | Pipe Size | Max. Pressure | Temperature Range, °F | Seat Material | Port Type | End-to-End Lg. | Specifications Met | Each | |
Push to Connect × NPTF Male | |||||||||
| 1/4" | 1/8 | 150 psi @ 70° F | 35° to 200° | EPDM Rubber | Full | 2 1/4" | FDA Compliant 21 CFR 177.1520, FDA Compliant 21 CFR 177.1655, FDA Compliant 21 CFR 177.2600, NSF/ANSI 61 | 00000000 | 00000 |
- Valve Type: Ball
- For Use With: Food, Beverage
- Seal Material: EPDM Rubber
- Specifications Met: FDA Compliant 21 CFR 177.1520, FDA Compliant 21 CFR 177.1655, FDA Compliant 21 CFR 177.2600, NSF/ANSI 61
Push-to-Connect
Tube Stem
- Valve Type: Ball
- For Use With: Food, Beverage
- Seal Material: EPDM Rubber
- Specifications Met: See table
| For Tube OD | Tube OD | Max. Pressure | Temperature Range, °F | Seat Material | Port Type | Port-to-Port Lg. | Specifications Met | Each | |
Push to Connect × Push-to-Connect Tube Stem | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| 1/4" | 3/8" | 150 psi @ 70° F | 35° to 200° | EPDM Rubber | Full | 1 1/2" | FDA Compliant 21 CFR 177.1520, FDA Compliant 21 CFR 177.1655, FDA Compliant 21 CFR 177.2600, NSF/ANSI 61 | 00000000 | 000000 |
| 3/8" | 3/8" | 150 psi @ 70° F | 35° to 200° | EPDM Rubber | Full | 1 1/2" | FDA Compliant 21 CFR 177.1520, FDA Compliant 21 CFR 177.1655, FDA Compliant 21 CFR 177.2600, NSF/ANSI 61 | 00000000 | 00000 |