Because these switches mount flush against a panel, they're easy to clean and hard to damage.

Because these switches mount flush against a panel, they're easy to clean and hard to damage.

Because these switches mount flush against a panel, they're easy to clean and hard to damage.

Actuate these switches with a quick push. A housing seals in anything that could ignite flammable material, so you can use them where ignitable gas and dust may be present.

Actuate these switches with a quick push.

Keep a switch within reach—but not in the way. These mount to the underside of desks, tables, and shelves to keep work surfaces clear and reduce the risk of accidental presses.

A rubber seal protects these switches from splashing water.

Maximize the space in a panel—these switches are half the size of most toggle switches.

Snap these switches onto your DIN rail to mount them. With a toggle switch and receptacle combined, you can actuate power and plug in devices from a single box.

Maximize space in a panel—these switches are smaller than most standard rocker switches.

Rated IP67 for protection from dust and temporary submersion.

The wide surface of these switches makes them easy to press on and off, even if your hands are full and you need to use an elbow.

Grip and twist a lever to turn these switches on or off—they’re designed to prevent accidental actuation. Install them into standard-sized panel cutouts.

These switches are rated for environments where hazardous material is present.

Operate these switches hands-free when working in damp or humid environments.

Step on these switches for hands-free actuation in an area with frequent washdowns.

Use this switch for intermittent, light-duty applications.

Install these key switches in 3/4" dia. panel cutouts. They require a key to turn circuits on or off, limiting access to sensitive equipment.

Connect these switches to a cable to control circuits from a distance. They're typically used to turn off production lines and material handling systems.

Immediately cut power by pulling the cable.

With a slim shape, these switches fit comfortably in your hand.

The lever sticks out further than a push button, making it easy to identify the position of these switches.

Prevent changes in frequency from damaging sensitive equipment.