Simple to use, these switches actuate with a quick push.

A housing seals in anything that could ignite flammable material, so you can use these switches where explosive gas, dust, and fibers may be. They actuate with a quick push.

Operate low-voltage devices that require less than 48 volts, such as doorbells and buzzers.

Because these switches mount flush against a panel, they're easy to clean and hard to damage.

Actuate these switches with the push of a button. Their buttons are distinct colors to help you quickly spot switches without labels.

The face of these switches mounts flush against a panel, so they're easy to clean and hard to damage.

Send a signal from your circuit board with the push of a button.

Actuate these switches with a quick push.

Keep a switch within reach—but not in the way. These mount to the underside of desks, tables, and shelves to keep work surfaces clear and reduce the risk of accidental presses.

Save space in your setup—these switches double as handles on machines and equipment.

Snap these switches onto your T-slotted framing rails—no need to drill or disassemble your existing structure.

These switches meet MIL-S-3950.

Maximize the space in a panel—these switches are half the size of most toggle switches.

Mount these switches under your desktop to keep your workspace clear and prevent accidental switching.

Choose from a variety of messages and colored lenses to combine a rocker with a base and wiring socket for a complete switch.

Also known as high-inrush current switches, these switches can handle starting currents up to 10 times greater than their rating, such as when a motor starts.

Rated IP67, these switches are protected from temporary submersion.

Prevent accidental actuation from bumps or vibration—these switches require you to grip and twist the lever to turn the switch. The contact block and actuator are all one piece, so they won’t separate in high-vibration applications.

Rated NEMA 4, 13, and IP66, these metal switches are protected from washdowns and oil/coolant spraying. Install them in 30 mm dia. cutouts.

Made for areas where ignitable gas and vapor may be present, these switches have a housing that seals in anything that could spark flammable material.

The enclosure not only protects these switches, but also adds options for how you install them.

Apply pressure from any direction to actuate these switches.

Step on these switches for hands-free actuation in an area with frequent washdowns.

Choose an actuator and contact block to make your own 16 mm switch.

Choose an actuator and contact block to make your own 30 mm switch.

To prevent accidental actuation and limit access to sensitive equipment, these switches require a key to turn circuits on or off. The contact block and actuator are all one piece, so they won’t separate in high-vibration applications.

With a round key that is difficult to duplicate, these switches provide a higher degree of security than standard key switches.

Designed for use near ignitable gases, fibers, and dust, these switches have a housing that seals in anything that could ignite flammable material. They require a key to turn circuits on or off, preventing accidental activation and limiting access.

Maximize space in a panel with these miniature switches.

Control machinery from a safe distance, or use these switches as call buttons.

These switches withstand temporary submersion.

Step on these mats to control doors, lights, or alarms.

Prevent personnel from getting too close to dangerous equipment while it’s running. Step anywhere on these mats and they can turn on warning lights and alarms or shut down equipment.

Customize the length of these switches by cutting them from a 50-foot roll.

These mats fit under carpeting or anywhere else you want to hide them.

Rated IP67 and NEMA 6, these switch mats withstand washdowns.

The faceplate on these controllers is sealed to meet NEMA 4X and IP66 for protection in washdown environments with splashing water, corrosive liquid, and dust.