Save space on a panel by using one switch to perform multiple switching functions.

Mount these switches in an outlet box. Also known as palm-button switches, they have a large button that makes them easy to use even while wearing gloves.

These switches meet MIL-S-3950.

Able to withstand high currents, these switches are often used with motors and pumps.

Choose from a variety of messages and colored lenses to combine a rocker with a base and wiring socket for a complete switch.

Able to withstand high currents, these switches are often used with motors and pumps.

The wide surface of these switches makes them easy to press on and off, even if your hands are full and you need to use an elbow.

Prevent accidental actuation from bumps or vibration—these switches require you to grip and twist the lever to turn the switch. The contact block and actuator are all one piece, so they won’t separate in high-vibration applications.

Prevent accidental actuation from bumps or jostles—these switches require you grip and twist a lever to turn them on or off. Install them in 30 mm dia. cutouts.

Avoid accidental actuation—these switches won’t turn on or off until you grip and twist the lever. Install in a 16 mm dia. cutout.

Make or break an electrical circuit. These contact blocks mount to manual switches and transmit an electrical signal when the switch actuator is engaged.

Choose an actuator and contact block to make your own 16 mm switch.

To prevent accidental actuation and limit access to sensitive equipment, these switches require a key to turn circuits on or off. The contact block and actuator are all one piece, so they won’t separate in high-vibration applications.

These 16 mm switches require a key to turn circuits on or off, limiting access to sensitive equipment.

Control machinery from a safe distance, or use these switches as call buttons.

These switches withstand temporary submersion.

These switches are housed in a plastic enclosure.

Start and stop motors outdoors and in other wet environments.