Choose only the colors you need.

A valve eliminates the risk of seepage caused by the expansion and contraction of a marker due to extreme temperature fluctuations.

The round sponge tip allows you to apply large, clear marks with ease—even on moving objects such as boxes on a conveyor.

Once dried, writing made with these markers can be flaked off or removed with a damp cloth or brush.

Mark storage containers, processing equipment, and other surfaces in your food plant without risking contamination.

Marks remain intact when exposed to degreasing solvents such as mineral spirits, mineral oil, gasoline, and most alcohols.

Often used for quality control and theft detection, the ink in these markers is invisible under normal conditions but fluorescent in ultraviolet light.

Choose only the colors you need.

Choose only the colors you need. These rich colors won’t fade in sunlight or exposure to weather.

Low in chlorides and halogens, these markers won't corrode or contaminate surfaces where degradation is a concern such as stainless steel. They're typically used in nuclear plants and oil and gas refineries.

These crayons come in a tube that makes it easier to write and keeps the crayon from drying out.

Often used for structural steel parts or layout work, markings from these crayons show through oil- and solvent-based primer coatings. Works on metal surfaces.

Also known as lumber crayons, these work better on rough surfaces than our standard wax crayons. Use on concrete, metal, and wood.

Write at any angle in food-, pharmaceutical-, and cosmetics-processing plants—these pens contain metal and chemical additives that set off metal detectors and show up on X-rays if they fall into your line.

Includes NEMA colors corresponding to the international color code for numbering.

Apply directly onto clean, dry pipes for clear identification of contents.

Indicate the flow direction in your pipe.

Label greasy and oily pipes where adhesive won’t hold—these markers coil around your pipe.

Write directly on these pipe markers to label the contents of your pipe. They coil around your pipe and stay in place without adhesive, so they’re ideal for pipes that are often greasy and dirty.

Specify the message you need to label a pipe that’s frequently washed down.

Secure peeling edges of adhesive pipe markers. Printed arrows on the tape's surface indicate the flow direction of your pipe's contents.

Specify the message you need to label the contents of a pipe in low-light conditions.

Label totes, ingredient bags, racks, and other items to keep your food processing plant organized. These tags are laminated with aluminum, so they’ll set off metal detectors if they fall into your line.

These tags have a matte surface so writing won't smudge or rub off accidentally.

Label devices, machines, and other equipment around your food processing plant while reducing the risk of contaminating the food.

These tags have a matte surface so writing won't smudge or rub off accidentally. Write on them with a permanent marker.

Designate parking spaces that are accessible.

Mix-and-match posts and chain to create a barrier that suits your needs.

Connect two lengths of chain to make longer chain barriers.

Identify bundles at a glance.

Identify bundles at a glance.

Load this chalk into chalk line reels to mark straight lines for both indoor and outdoor projects.

Use these footprints to direct traffic in your facility.

These PVC flags are brightly colored and weather resistant.

Tie these flags around posts and stakes.

Mark traffic lanes, parking lots, and factory floors.

This paint lays on thicker than other turf marking paint, making cleaner, bolder lines. It is water based and will not harm grass or other plant life.

These shapes can be written on with a wet erase marker and wiped clean with a damp cloth.