McMaster-Carr logo
    Filter by
    System of Measurement
    Hook Shape
    Connection Hardware
    Fastener Head Type
    DFARS Specialty Metals
    Industrial Info Compare
    U.S.–Mexico–Canada Agreement (USMCA) Qualifying
    Export Control Classification Number (ECCN)
    Industrial Info Snippet
    Thread Type
    Drill Bit Decimal Size Equivalent
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    170 Products

    Bolt-Style Sleeve Anchors for Block and Brick

    Remove the bolt so the anchor is flush with your walls and floors to slide components past these anchors, making it easier to install or make adjustments. They’re best for door frames that need to be pressed into place or machinery you service frequently. All have a sleeve that expands inside your hole to create a strong grip. Since the gripping force is distributed along the entire length of the anchor, it won’t crack soft materials like block and brick. You can use these anchors as an alternative to wedge anchors in concrete near edges, corners, or other weak points, but they are not as strong.
    To install, drive the anchor through your component into a drilled hole until the head meets the surface. Then, tighten the bolt to expand the anchor sleeve. As you tighten, the nylon ring compresses to secure the component against the surface. You can remove the bolt, but the anchor itself cannot be removed.
    Anchors with Hex Head
    Image of Product. Front orientation. Contains Annotated. Anchors. Bolt-Style Sleeve Anchors for Block and Brick, Anchors with Hex Head.
    Corrosion-Resistant 18-8 Stainless Steel—The choice for wet and outdoor environments, these anchors resist rust. However, they’ll corrode or pit when exposed to salt water and chemicals.
    Thread
    Ultimate
    Strength, lbf
    Each
    Package
    Lg.
    Size
    Lg.
    Min. Installation
    Dp.
    Drill Bit
    Size
    Pull-Out
    Shear
    Conditions
    Tested In
    Installation
    Torque, ft·lbf
    Each
    Pkg.
    Qty.
    Pkg.
    Corrosion-Resistant 18-8 Stainless Steel
     
    1/4" Diameter
    1 3/4"10-24
    		3/4"1 1/4"1/4"
    		1,4802,0804,000 psi Concrete392405A19400000492405A102000000
    3"10-24
    		3/4"1 1/4"1/4"
    		1,4802,0804,000 psi Concrete392405A1980000492405A10400000
     
    3/8" Diameter
    2 1/4"5/16"-18
    		7/8"2"3/8"
    		4,4006,4004,000 psi Concrete1292405A2000000492405A10600000
    3 1/2"5/16"-18
    		7/8"2"3/8"
    		4,4006,4004,000 psi Concrete1292405A20200000492405A10800000
    4"5/16"-18
    		7/8"2"3/8"
    		4,4006,4004,000 psi Concrete1292405A20300000492405A11100000
     
    1/2" Diameter
    2 3/4"3/8"-16
    		1"2 1/2"1/2"
    		6,4008,0004,000 psi Concrete2592405A30000000492405A11300000
    4 3/4"3/8"-16
    		1"2 1/2"1/2"
    		6,4008,0004,000 psi Concrete2592405A30200000492405A11500000
     

    Drive Rivet Anchors for Block and Brick

    Fasten signs, security cameras, and motion detectors. All of these anchors have a rivet head that creates a secure connection with a finished look. Easier to install than other types of anchors for block and brick, the anchors expand as you hammer in the pin or screw. Since the gripping force is distributed along the entire length of the anchor, it won’t crack soft materials. These anchors can be used in concrete near edges, corners, or other weak points, but they are not as strong as other drive rivet anchors for concrete.
    To install, insert the anchor through your component and into a drilled hole. Then, hammer the pin or screw until it's flush with the anchor's head, which expands the anchor body.
    Pin Drive Anchors
    Image of Product. Front orientation. Contains Annotated. Anchors. Drive Rivet Anchors for Block and Brick, Pin Drive Anchors.
    To remove, pry out the pin and then pull out the anchor.
    Head
    Ultimate
    Strength, lbf
    Lg.
    Dia.
    Ht.
    Min. Installation
    Dp.
    Drill Bit
    Size
    Pin Material
    Material
    Pull-Out
    Shear
    Conditions
    Tested In
    Certification
    Pkg.
    Qty.
    Pkg.
    1/4" Diameter
    1"9/16"9/64"5/8"1/4"
    		18-8 Stainless Steel
    		Zinc5806554,000 psi ConcreteFM Approved
    		2597090A13000000
    1 1/4"9/16"9/64"5/8"1/4"
    		18-8 Stainless Steel
    		Zinc5806554,000 psi ConcreteFM Approved
    		2597090A1350000
    1 1/2"9/16"9/64"5/8"1/4"
    		18-8 Stainless Steel
    		Zinc5806554,000 psi ConcreteFM Approved
    		1097090A1400000
    2"9/16"9/64"5/8"1/4"
    		18-8 Stainless Steel
    		Zinc5806554,000 psi ConcreteFM Approved
    		1097090A1450000
     

    Hook Anchors for Concrete

    Fasten everything from signposts to support beams. Install these anchors in wet concrete during construction, with their threads sticking out of the surface. Designed for permanent installations, you'd have to cut these anchors out to remove them.
    L-Hook
    Image of Product. Front orientation. Contains Annotated. Anchors. Hook Anchors for Concrete, L-Hook.
    Corrosion-Resistant 18-8 Stainless Steel—The choice for wet and outdoor environments, these anchors resist rust. However, they’ll corrode or pit when exposed to salt water and chemicals.
    Ultimate
    Strength
    Lg.
    Thread
    Size
    Min. Thread
    Lg.
    Hook
    Lg.
    Tensile Strength,
    psi
    Pull-Out
    Shear
    Each
    Corrosion-Resistant 18-8 Stainless Steel
     
    3/8" Diameter
    8"3/8"-16
    		2 1/2"2"80,000Not RatedNot Rated91615A110000000
    10"3/8"-16
    		2 1/2"2"80,000Not RatedNot Rated91615A12000000
    12"3/8"-16
    		2 1/2"2"80,000Not RatedNot Rated91615A13000000
    14"3/8"-16
    		2 1/2"2"80,000Not RatedNot Rated91615A14000000
     
    1/2" Diameter
    8"1/2"-13
    		2 1/2"2"80,000Not RatedNot Rated91615A21000000
    10"1/2"-13
    		2 1/2"2"80,000Not RatedNot Rated91615A22000000
    12"1/2"-13
    		2 1/2"2"80,000Not RatedNot Rated91615A23000000
    16"1/2"-13
    		2 1/2"2"80,000Not RatedNot Rated91615A24000000
    18"1/2"-13
    		2 1/2"2"80,000Not RatedNot Rated91615A25000000
     
    5/8" Diameter
    8"5/8"-11
    		2 1/2"2"80,000Not RatedNot Rated91615A31000000
    10"5/8"-11
    		2 1/2"2"80,000Not RatedNot Rated91615A32000000
    12"5/8"-11
    		2 1/2"2"80,000Not RatedNot Rated91615A33000000
    18"5/8"-11
    		2 1/2"2"80,000Not RatedNot Rated91615A35000000
     
    3/4" Diameter
    8"3/4"-10
    		3"2 3/4"80,000Not RatedNot Rated91615A41000000
    10"3/4"-10
    		3"2 3/4"80,000Not RatedNot Rated91615A42000000
    12"3/4"-10
    		3"2 3/4"80,000Not RatedNot Rated91615A43000000
    14"3/4"-10
    		3"2 3/4"80,000Not RatedNot Rated91615A44000000
    18"3/4"-10
    		3"2 3/4"80,000Not RatedNot Rated91615A45000000
    24"3/4"-10
    		3"2 3/4"80,000Not RatedNot Rated91615A46000000
     
    1" Diameter
    12"1"-8
    		4"3 3/4"80,000Not RatedNot Rated91615A53000000
    18"1"-8
    		4"3 3/4"80,000Not RatedNot Rated91615A55000000
    24"1"-8
    		4"3 3/4"80,000Not RatedNot Rated91615A56000000
     
    J-Hook
    Image of Product. Front orientation. Contains Annotated. Anchors. Hook Anchors for Concrete, J-Hook.
    Corrosion-Resistant 18-8 Stainless Steel—The choice for wet and outdoor environments, these anchors resist rust. However, they’ll corrode or pit when exposed to salt water and chemicals.
    Hook
    Ultimate
    Strength
    Lg.
    Thread
    Size
    Min. Thread
    Lg.
    Lg.
    Opening
    Tensile Strength,
    psi
    Pull-Out
    Shear
    Each
    Corrosion-Resistant 18-8 Stainless Steel
     
    3/8" Diameter
    8"3/8"-16
    		2 1/2"1"1/2"80,000Not RatedNot Rated91521A110000000
    10"3/8"-16
    		2 1/2"1"1/2"80,000Not RatedNot Rated91521A11500000
    12"3/8"-16
    		2 1/2"1"1/2"80,000Not RatedNot Rated91521A12000000
    14"3/8"-16
    		2 1/2"1"1/2"80,000Not RatedNot Rated91521A12500000
     
    1/2" Diameter
    8"1/2"-13
    		2 1/2"1 1/4"5/8"80,000Not RatedNot Rated91521A15000000
    10"1/2"-13
    		2 1/2"1 1/4"5/8"80,000Not RatedNot Rated91521A15500000
    12"1/2"-13
    		2 1/2"1 1/4"5/8"80,000Not RatedNot Rated91521A16000000
    16"1/2"-13
    		2 1/2"1 1/4"5/8"80,000Not RatedNot Rated91521A16500000
    18"1/2"-13
    		2 1/2"1 1/4"5/8"80,000Not RatedNot Rated91521A17000000
     
    5/8" Diameter
    8"5/8"-11
    		2 1/2"1 1/4"3/4"80,000Not RatedNot Rated91521A20500000
    10"5/8"-11
    		2 1/2"1 1/4"3/4"80,000Not RatedNot Rated91521A21000000
    12"5/8"-11
    		2 1/2"1 1/4"3/4"80,000Not RatedNot Rated91521A21500000
     
    3/4" Diameter
    8"3/4"-10
    		3"1 1/2"1 1/8"80,000Not RatedNot Rated91521A26000000
    10"3/4"-10
    		3"1 1/2"1 1/8"80,000Not RatedNot Rated91521A30500000
    12"3/4"-10
    		3"1 1/2"1 1/8"80,000Not RatedNot Rated91521A31000000
    14"3/4"-10
    		3"1 1/2"1 1/8"80,000Not RatedNot Rated91521A31500000
    18"3/4"-10
    		3"1 1/2"1 1/8"80,000Not RatedNot Rated91521A32000000
    24"3/4"-10
    		3"1 1/2"1 1/8"80,000Not RatedNot Rated91521A32500000
     
    1" Diameter
    18"1"-8
    		4"3 1/4"2 1/8"80,000Not RatedNot Rated91521A42000000
     

    Sleeve Anchors for Block and Brick

    Mount machinery, railings, and framing in walls and floors. These anchors have a sleeve that expands inside your hole to create a strong grip. Since the gripping force is distributed along the entire length of the anchor, it won’t crack soft materials like block and brick. You can use these anchors as an alternative to wedge anchors in concrete near edges, corners, or other weak points, but they are not as strong.
    To install, drive the anchor through your machinery into a drilled hole until the head meets the surface. Then, tighten the nut or flat head to expand the anchor sleeve. Remove your machinery by unfastening the nut or flat head, but the anchor itself cannot be removed.
    Anchors with Hex Nut
    Image of Product. Front orientation. Contains Annotated. Anchors. Sleeve Anchors for Block and Brick, Hex Nut.
    Corrosion-Resistant 18-8 Stainless Steel—The choice for wet and outdoor environments, these anchors resist rust. However, they’ll corrode or pit when exposed to salt water and chemicals.
    Thread
    Ultimate
    Strength, lbf
    Lg.
    Size
    Lg.
    Min. Installation
    Dp.
    Drill Bit
    Size
    Pull-Out
    Shear
    Conditions
    Tested In
    Installation
    Torque, ft·lbf
    Pkg.
    Qty.
    Pkg.
    Corrosion-Resistant 18-8 Stainless Steel
     
    5/16" Diameter
    1 7/8"1/4"-20
    		1"1 1/8"5/16"
    		1,8801,6804,000 psi Concrete22596892A231000000
    2 3/4"1/4"-20
    		2"1 1/8"5/16"
    		1,8801,6804,000 psi Concrete22196892A2440000
     
    3/8" Diameter
    2 1/8"5/16"-18
    		1 1/4"1 1/4"3/8"
    		3,0002,0804,000 psi Concrete26196892A2580000
    3 1/4"5/16"-18
    		2 1/4"1 1/4"3/8"
    		3,0002,0804,000 psi Concrete26196892A2740000
     
    1/2" Diameter
    2 5/8"3/8"-16
    		1 5/8"1 1/2"1/2"
    		4,8006,0004,000 psi Concrete38196892A2870000
    4 1/2"3/8"-16
    		3"1 1/2"1/2"
    		4,8006,0004,000 psi Concrete38196892A30000000
     
    5/8" Diameter
    5"1/2"-13
    		4 1/4"2"5/8"
    		6,0008,4004,000 psi Concrete75196892A31400000
     
    3/4" Diameter
    3 3/8"5/8"-11
    		2 1/4"2"3/4"
    		8,80012,4004,000 psi Concrete110196892A32900000
    5"5/8"-11
    		3 1/4"2"3/4"
    		8,80012,4004,000 psi Concrete110196892A34300000
     

    Mesh Anchors for Hollow Block and Brick

    Image of ProductInUse. Front orientation. Anchors. Mesh Anchors for Hollow Block and Brick.
    Image of Product. Front orientation. Anchors. Mesh Anchors for Hollow Block and Brick.
    Create a secure connection that withstands vibration better than any of our other anchors for block and brick. The mesh on these anchors grips adhesive (sold separately), preventing it from running into the cavities of hollow block and brick to secure threaded rods or screws. To achieve the stated strengths, you must use the adhesive listed. A good option for outdoor use, these anchors are made of 18-8 stainless steel to resist rusting while your adhesive seals out moisture.
    To install, first fill the mesh anchor with adhesive and press it into a drilled hole. Then, press the tab against your block to hold the anchor in place, and insert a threaded rod or screw. The rod or screw will push the adhesive out of the mesh, forming a plug that keeps the rod or screw in place once the adhesive dries. Once installed, the rod or screw can’t be removed.
    Dia.
    Ultimate
    Strength, lbf
    For
    Rod
    For
    Hole
    Lg.
    Material
    Pull-Out
    Shear
    Each
    1/4"3/8"2"18-8 Stainless Steel1,5501,90097178A11000000
    3/8"1/2"3 1/2"18-8 Stainless Steel1,6602,07097178A1200000
    1/2"5/8"3 1/2"18-8 Stainless Steel2,4504,46097178A1300000
    5/8"3/4"4 1/2"18-8 Stainless Steel2,5405,04097178A1400000
    Anchoring Adhesives
    Container
    Size, fl. oz.
    Begins to
    Harden, min.
    Reaches Full
    Strength, min.
    Mix
    Ratio
    Temp. Range,
    ° F
    Each
    9.554510:115 to 1107498A55000000

    Flat Head Tapping Screws for Masonry and Concrete

    Image of Product. Front orientation. Contains Annotated. Masonry and Concrete Screws. Flat Head Tapping Screws for Masonry and Concrete.
    Beveled under the head, these screws give you a flush finish in countersunk holes. They’re also known as Tapcons. To create a pilot hole, use a hammer drill or rotary hammer and a compatible bit. Pull-out strength and shear strength values are 25% of the ultimate values.
    18-8 Stainless Steel—The best choice for wet and outdoor environments. These screws have a stainless steel head to resist corrosion and a hardened steel point and threads to penetrate concrete.
    Head
    Strength,
    lbf
    Lg.
    Drill Bit
    Size
    Thread
    Lg.
    Min. Installation
    Dp.
    Dia.
    Ht.
    Pull-Out
    Shear
    Conditions
    Tested In
    Drive
    Style
    Countersink
    Angle
    Pkg.
    Qty.
    Pkg.
    18-8 Stainless Steel
     
    1/4" Screw Size
    1 1/4"3/16"
    		1 1/8"1"13/32"3/16"1101952,000 psi ConcreteTorx
    		82°
    		590161A50100000
    1 3/4"3/16"
    		1 5/8"1"13/32"3/16"1101952,000 psi ConcreteTorx
    		82°
    		590161A5020000
    2 1/4"3/16"
    		1 7/8"1"13/32"3/16"1101952,000 psi ConcreteTorx
    		82°
    		590161A50300000
    2 3/4"3/16"
    		1 7/8"1"13/32"3/16"1101952,000 psi ConcreteTorx
    		82°
    		590161A50400000
    3 1/4"3/16"
    		1 7/8"1"13/32"3/16"1101952,000 psi ConcreteTorx
    		82°
    		590161A50500000
    4"3/16"
    		1 7/8"1"13/32"3/16"1101952,000 psi ConcreteTorx
    		82°
    		590161A50600000
     
    Installation Tools
    Image of Product. Front orientation. Masonry and Concrete Screw Installation Tools.
    Includes
    Each
    5/16" Hex Socket
    No. 2 Socket
    1/4" Hex Socket
    1/8" Hex Key
    Drill Adapter
    1/2" dia. × 6" lg. Drive Sleeve    		90161A1040000000

    Hex Head Tapping Screws for Masonry and Concrete

    Image of Product. Front orientation. Contains Annotated. Masonry and Concrete Screws. Hex Head Tapping Screws for Masonry and Concrete, 18-8 Stainless Steel.

    18-8 Stainless Steel

    Secure material into masonry and concrete—these screws have a hex head for a firm, high-torque grip. They’re also known as Tapcons. To create a pilot hole, use a hammer drill or rotary hammer and a compatible bit. Pull-out strength and shear strength values are 25% of the ultimate values.
    18-8 Stainless Steel—The best choice for wet and outdoor environments. These screws have a stainless steel head to resist corrosion and a hardened steel point and threads to penetrate concrete.
    Head
    Strength,
    lbf
    Lg.
    Drill Bit
    Size
    Thread
    Lg.
    Min. Installation
    Dp.
    Wd.
    Ht.
    Pull-Out
    Shear
    Conditions
    Tested In
    Drive Style
    Pkg.
    Qty.
    Pkg.
    18-8 Stainless Steel
     
    1/4" Screw Size
    1 1/4"3/16"
    		1 1/8"1"5/16"9/64"1101952,000 psi ConcreteExternal Hex
    		590161A60100000
    1 3/4"3/16"
    		1 5/8"1"5/16"9/64"1101952,000 psi ConcreteExternal Hex
    		590161A6020000
    2 1/4"3/16"
    		1 7/8"1"5/16"9/64"1101952,000 psi ConcreteExternal Hex
    		590161A60300000
    2 3/4"3/16"
    		1 7/8"1"5/16"9/64"1101952,000 psi ConcreteExternal Hex
    		590161A60400000
    3 1/4"3/16"
    		1 7/8"1"5/16"9/64"1101952,000 psi ConcreteExternal Hex
    		590161A60500000
    4"3/16"
    		1 7/8"1"5/16"9/64"1101952,000 psi ConcreteExternal Hex
    		190161A6060000
     
    Installation Tools
    Image of Product. Front orientation. Masonry and Concrete Screw Installation Tools.
    Includes
    Each
    5/16" Hex Socket
    No. 2 Socket
    1/4" Hex Socket
    1/8" Hex Key
    Drill Adapter
    1/2" dia. × 6" lg. Drive Sleeve    		90161A1040000000

    High-Strength Toggle Anchors for Drywall

    Image of ProductInUse. Front orientation. Anchors. High-Strength Toggle Anchors for Drywall.
    Image of Product. Front orientation. Contains Annotated. Anchors. High-Strength Toggle Anchors for Drywall.
    Our highest-strength drywall anchors are strong enough to secure pegboards, grab bars, and sinks. The toggle creates an extremely tight hold and won’t fall behind the wall when your screw is removed, so you can switch out components without losing strength. However, the anchor itself cannot be removed. Unlike traditional toggle bolt anchors, the toggle is pulled tight to the wall with the cap, which also covers the hole.
    To install, push the toggle through a drilled hole and pull the anchor back toward you until the toggle rests flush against the wall. Then, slide the cap along the straps up to the wall. Push straps side-to-side, snapping them off so they're level with the cap. Next, position your component over the hole, insert a machine screw, and tighten. The minimum screw length is the wall and component thicknesses plus 1/2".
    Ultimate
    Strength, lbf
    For Thread
    Size
    Usable Lg.
    Drill Bit
    Size
    Wing
    Span
    Toggle Material
    Material
    Pull-Out
    Shear
    Conditions
    Tested In
    Pkg.
    Qty.
    Pkg.
    10-24
    		3/8" to 3 5/8"1/2"
    		2"18-8 Stainless Steel
    		Polystyrene2302401/2" Drywall198184A41100000
    10-24
    		2" to 9 1/2"1/2"
    		2"18-8 Stainless Steel
    		Polystyrene2302401/2" Drywall197802A3390000
    1/4"-20
    		3/8" to 3 5/8"1/2"
    		2"18-8 Stainless Steel
    		Polystyrene2602401/2" Drywall198184A4130000
    1/4"-20
    		2" to 9 1/2"1/2"
    		2"18-8 Stainless Steel
    		Polystyrene2602401/2" Drywall197802A3400000
    3/8"-16
    		3/8" to 2 1/2"3/4"
    		2"18-8 Stainless Steel
    		Polystyrene2702901/2" Drywall198184A4150000
    1/2"-13
    		3/8" to 2 1/2"3/4"
    		2"18-8 Stainless Steel
    		Polystyrene270Not Rated1/2" Drywall198184A4170000

    Anchors for Concrete

    Image of ProductInUse. Front orientation. Anchors. Anchors for Concrete.
    Image of Product. Front orientation. Contains Annotated. Anchors. Anchors for Concrete, Flush Profile.

    Flush Profile

    Image of Product. Front orientation. Anchor Installation Tools. For Concrete.

    Installation Tools

    These anchors are your go-to for suspending conduit, lighting, and pipe overhead in concrete. All have an internal plug that expands in four directions to create a tight grip before inserting a threaded rod or bolt. Since the grip is focused at the base, these anchors are best suited for concrete, which can handle the gripping pressure better than softer block and brick. They’re also known as drop-in anchors.
    To install, place the anchor into the hole, insert the required installation tool (sold separately), and drive with a hammer until the shoulder of the tool contacts the anchor. All create a permanent female-threaded connection that lets you remove and reinstall a screw or threaded rod.
    Corrosion-Resistant 18-8 Stainless Steel—The choice for wet and outdoor environments, these anchors resist rust. However, they’ll corrode or pit when exposed to salt water and chemicals.
    Anchors
    Installation
    Tools
    Thread
    Ultimate
    Strength, lbf
    Size
    Dp.
    Type
    Lg.
    Drill Bit
    Size
    Min. Installation
    Dp.
    Pull-Out
    Shear
    Conditions
    Tested In
    Pkg.
    Qty.
    Pkg.
    Each
    Corrosion-Resistant 18-8 Stainless Steel
     
    Flush Profile
    1/4"-20
    		7/16"UNC
    		1"3/8"
    		1"1,9802,1204,000 psi Concrete497082A1600000097077A16000000
    3/8"-16
    		5/8"UNC
    		1 9/16"1/2"
    		1 9/16"4,1804,5804,000 psi Concrete197082A041000097077A1700000
    1/2"-13
    		13/16"UNC
    		2"5/8"
    		2"5,7606,4004,000 psi Concrete197082A043000097077A1800000
    5/8"-11
    		1 3/16"UNC
    		2 1/2"7/8"
    		2 1/2"7,44012,3804,000 psi Concrete197082A0450000097077A19000000
    3/4"-10
    		1 3/8"UNC
    		3 3/16"1"
    		3 3/16"9,40015,6804,000 psi Concrete197082A0460000097077A21000000
     

    Wedge Anchors for Concrete

    Image of ProductInUse. Front orientation. Anchors. Wedge Anchors for Concrete.
    Image of Product. Front orientation. Contains Annotated. Anchors. Wedge Anchors for Concrete.
    Secure junction boxes, safety railings, and structural beams in concrete floors. These anchors have a wedge-shaped base that expands against the hole’s sides, forming a tight grip that withstands high pull-out forces. Since the grip is focused at the base, these anchors are best suited for concrete, which can handle the gripping pressure better than softer block and brick. However, they require holes that match the anchors' diameter exactly to achieve their pull-out strength, making them more difficult to install than sleeve anchors.
    To install, drive the anchor through your component into a drilled hole until the washer and nut meet the surface. Then, tighten the nut to expand the anchor base. Remove your component by unfastening the nut, but the anchor itself cannot be removed.
    Corrosion-Resistant 18-8 Stainless Steel—The choice for wet and outdoor environments, these anchors resist rust. However, they’ll corrode or pit when exposed to salt water and chemicals.
    Ultimate
    Strength, lbf
    Each
    Package
    Lg.
    Thread
    Size
    Min. Thread
    Lg.
    Min. Installation
    Dp.
    Drill Bit
    Size
    Pull-Out
    Shear
    Conditions
    Tested In
    Installation
    Torque, ft·lbf
    Certification
    Each
    Pkg.
    Qty.
    Pkg.
    Corrosion-Resistant 18-8 Stainless Steel
     
    1/4" Diameter
    1 3/4"1/4"-20
    		5/8"1 1/4"1/4"
    		8401,0004,000 psi Concrete8—92188A100000002092188A112000000
    2 1/4"1/4"-20
    		1 1/8"1 1/4"1/4"
    		8401,0004,000 psi Concrete8—92188A10100002092188A11400000
    3 1/4"1/4"-20
    		2 1/8"1 1/4"1/4"
    		8401,0004,000 psi Concrete8—92188A10200002092188A11600000
     
    3/8" Diameter
    2 1/4"3/8"-16
    		1 1/8"1 7/8"3/8"
    		4,4005,2004,000 psi Concrete30FM Approved, UL Listed
    		92188A36200002092188A36100000
    2 3/4"3/8"-16
    		1 3/8"1 7/8"3/8"
    		4,7205,5804,000 psi Concrete30FM Approved, UL Listed
    		92188A71300002092188A71200000
    3"3/8"-16
    		1 5/8"1 7/8"3/8"
    		4,7205,5804,000 psi Concrete30FM Approved, UL Listed, ICC-ES Listed
    		92188A43200002092188A43100000
    3 1/2"3/8"-16
    		2.09"1 7/8"3/8"
    		4,7205,5804,000 psi Concrete30FM Approved, UL Listed
    		92188A91100002092188A91200000
    3 3/4"3/8"-16
    		2 3/8"1 7/8"3/8"
    		4,7205,5804,000 psi Concrete30FM Approved, UL Listed
    		92188A22300002092188A22900000
    5"3/8"-16
    		3 1/2"1 7/8"3/8"
    		4,7205,5604,000 psi Concrete30FM Approved, UL Listed
    		92188A82300001092188A59500000
    7"3/8"-16
    		5 5/8"1 7/8"3/8"
    		4,4005,2004,000 psi Concrete30FM Approved, UL Listed
    		92188A37200001092188A37100000
     
    1/2" Diameter
    2 3/4"1/2"-13
    		1 1/4"2 1/4"1/2"
    		7,58010,2404,000 psi Concrete65—92188A92100001092188A92200000
    3 3/4"1/2"-13
    		2"2 3/4"1/2"
    		7,20010,0004,000 psi Concrete65FM Approved, UL Listed
    		92188A38200001092188A38100000
    4 1/2"1/2"-13
    		3 1/8"2 1/4"1/2"
    		4,4004,8004,000 psi Concrete60FM Approved, UL Listed
    		92188A30600001092188A14500000
    5 1/2"1/2"-13
    		3 3/4"2 3/4"1/2"
    		7,58010,2404,000 psi Concrete65FM Approved, UL Listed
    		92188A70200001092188A70100000
    7"1/2"-13
    		5 1/4"2 3/4"1/2"
    		7,56010,2404,000 psi Concrete60FM Approved, UL Listed
    		92188A3420000492188A34300000
    8 1/2"1/2"-13
    		6"2 3/4"1/2"
    		7,58010,2404,000 psi Concrete65FM Approved, UL Listed
    		92188A70500000492188A70400000
     
    5/8" Diameter
    3 1/2"5/8"-11
    		1 3/8"2 3/4"5/8"
    		5,2008,0004,000 psi Concrete90—92188A400000001092188A147000000
    4 1/2"5/8"-11
    		2"2 3/4"5/8"
    		5,2008,0004,000 psi Concrete90—92188A401000001092188A149000000
    5"5/8"-11
    		3 1/2"2 3/4"5/8"
    		5,2008,0004,000 psi Concrete90FM Approved, UL Listed
    		92188A454000001092188A158000000
    6"5/8"-11
    		4 1/2"2 3/4"5/8"
    		5,2008,0004,000 psi Concrete90FM Approved, UL Listed
    		92188A452000001092188A156000000
    7"5/8"-11
    		3 1/2"2 3/4"5/8"
    		5,2008,0004,000 psi Concrete90—92188A40500000492188A15200000
    8 1/2"5/8"-11
    		7"2 3/4"5/8"
    		5,2008,0004,000 psi Concrete90FM Approved, UL Listed
    		92188A45600000492188A16100000
    10"5/8"-11
    		2"2 3/4"5/8"
    		5,2008,0004,000 psi Concrete90—92188A41100000492188A15400000
    12"5/8"-11
    		2"2 3/4"5/8"
    		5,2008,0004,000 psi Concrete90—92188A46200000492188A16300000
     
    3/4" Diameter
    4 3/4"3/4"-10
    		2.53"4 1/8"3/4"
    		17,32027,9404,000 psi Concrete150FM Approved
    		92188A93100000492188A93200000
    5 1/2"3/4"-10
    		3.09"4 1/8"3/4"
    		17,32027,9404,000 psi Concrete150FM Approved, UL Listed
    		92188A94100000492188A94200000
    6 1/4"3/4"-10
    		3 3/4"4 1/8"3/4"
    		17,32027,9404,000 psi Concrete150FM Approved, UL Listed
    		92188A70800000492188A70700000
    7"3/4"-10
    		4.59"4 1/8"3/4"
    		17,32027,9404,000 psi Concrete150FM Approved, UL Listed
    		92188A95100000492188A95200000
    8 1/2"3/4"-10
    		6"4 1/8"3/4"
    		17,32027,9404,000 psi Concrete150FM Approved, UL Listed
    		92188A42200000492188A42100000
    12"3/4"-10
    		2 1/4"3 3/4"3/4"
    		8,80011,2004,000 psi Concrete150—92188A56000000492188A181000000
     
    7/8" Diameter
    8"7/8"-9
    		4 3/4"4"7/8"
    		9,60015,6004,000 psi Concrete250FM Approved, UL Listed
    		92188A57000000492188A185000000
     
    1" Diameter
    6"1"-8
    		2 3/8"4 1/2"1"
    		13,60020,8004,000 psi Concrete300FM Approved, UL Listed
    		92188A60100000492188A189000000
    9"1"-8
    		5 3/8"4 1/2"1"
    		13,60020,8004,000 psi Concrete300FM Approved, UL Listed
    		92188A60200000492188A192000000
    12"1"-8
    		8 3/8"4 1/2"1"
    		13,60020,8004,000 psi Concrete300FM Approved, UL Listed
    		92188A60500000492188A194000000
     
    back to top