Rollers have a standard 1.9" diameter to fit most roller conveyors.

Rollers have diameters between 2" and 4".

These rollers have 0.78" diameters.

These rollers have diameters 1 3/4" and below.

Choose the width you need from 6" to 60" in 1/16" increments.

All stainless steel construction makes these rollers suitable for washdown applications. They have 2 1/2" diameters.

Rollers are made from thick, 12-ga. steel so they're less likely to dent than standard 16-ga. rollers.

Rollers move in one direction so they won't roll back when idle, keeping packages in place.

Rollers are grooved to accommodate round belts on line-shaft conveyors.

Rollers are tapered for use on curved conveyor sections.

Replace rollers on a chain-driven conveyor.

Small-diameter rollers on these dollies rotate like a conveyor belt around a center plate to distribute weight evenly and provide a smooth ride.

Use these dollies with their rigid top platform for straight-line movement, or add the included swivel platforms for controlled turning. The small-diameter rollers rotate like a conveyor belt around a center plate to distribute weight evenly and provide a smooth ride.

Large diameter rollers are axle mounted and roll like wheels.

These dollies are designed to make turning easy.

Also known as appliance dollies, use these in pairs to support loads of varying sizes.

For maneuverability in tight spaces, these dollies have two platforms that swivel independently. Their casters are often called triple-swivel casters or zero-throw casters.

These dollies provide the leverage you need to move file cabinets and crates. Slide one end under the edge of a load and step down on the other end to raise the load.

Position these dollies under a load, then depress the handle to lift it.

Because these dollies are lower to the ground than most steel dollies you won't have far to lift a load.

The open design makes these dollies not only lighter than solid-platform dollies, but also easier to carry.

The open design makes these dollies not only lighter than solid-platform dollies, but also easier to carry.

The platforms on these dollies are oversized to handle pallets, machinery, large containers, and other heavy equipment.

A rustproof aluminum platform and open corners for easy drainage make these dollies a good fit for food-service applications, plus they meet NSF/ANSI standards for food equipment.

The casters on these dollies are mounted outside the platform for increased stability.

Maximize stability and minimize spills. These dollies have a large, open platform that sits low to the ground to slide under drums for better support and minimal tipping.

A T-style handle and four swivel casters make these dollies easy to push, pull, and maneuver along walls and aisles.

Contain spills when moving and storing drums.