Thicker than standard antifatigue mats, these mats have more cushion for greater comfort.

Use these greaseproof mats where grease and oil are constantly present.

Thicker than our other wear-resistant antifatigue mats, these mats have more cushion for greater comfort.

These general purpose mats provide cushion to reduce the fatigue and strain of standing while working.

Use these greaseproof mats where grease and oil are constantly present.

Rated for use in Fed. Spec. Class 100 and ISO Class 5 clean rooms, these mats release a low number of particles into the air.

Reduce the strain and fatigue of standing while working in food-processing and pharmaceutical plants, as well as in clean rooms.

Use these mats where drainage and slip resistance are a priority.

Use greaseproof mats where grease and oil are constantly present. They're treated to protect the mat against odors and degradation.

Rigid and lightweight, these polyethylene mats resist acids, salt, gasoline, solvents, and chemicals.

These mats withstand occasional contact with grease.

Rigid mats are more durable than flexible mats, withstanding heavy loads and rough use.

These mats meet NSF/ANSI standards for use in food-processing areas.

These mats provide good traction while protecting walkways, ramps, and other high-traffic areas.

With a coarse ceramic/garnet abrasive surface, these mats feel like walking on sandpaper, even in environments where moisture and grease are constantly present.

Spray these mats with a hose to remove mud and other debris.

Made of galvanized steel, these rust-resistant mats scrape off stubborn mud and snow.

Get three zones of cleaning power in one convenient mat. Zone one is for aggressive scraping, zone two alternates stripes of scraping and drying, and zone three is for drying.

These mats have a smooth backing for use on hard floor surfaces.

Use these mats to drain static that can harm sensitive equipment.

Protect sensitive clean room electronics from harmful static charges. Commonly used in pharmaceutical and laboratory Fed. Std. Class 100 and ISO Class 5 clean rooms, these mats release a low number of particles into the air.

These mats are made up of layers of adhesive-coated sheets. When the top sheet gets dirty, pull the tab to remove it and expose the next clean sheet.

Decontaminate your shoes before entering clean environments. These mats have raised edges so they can be filled with disinfecting solution.

This tape has an odorless, pressure-sensitive adhesive on both sides to secure mats to the floor.

For use in food plants and other sanitary environments, these drainage mats are brightly marked at six-foot intervals to keep workers at a safe distance and help prevent the spread of illness.

With brightly colored markings spaced six feet apart, these drainage mats guide coworkers to stand at a safe distance from each other to help prevent the spread of illness. An open-grid design lets liquid pass through beneath your feet, so puddles don’t form to cause a slipping hazard.

Add edging to vinyl-backed mats for a finished look.

Openings in the surface allow dust, dirt, and liquids to pass through.

Often used in stairwells and hallways, these tiles have a raised-disc surface that provides traction and is easy to clean.

Snap any combination of bin cups onto the liner to create a custom configuration for organizing small parts.

These liners are treated to protect your tools against rust.

These pads take up less space than creepers for use under extra-low-clearance equipment.

Magnetized to hold metal tools and parts, these trays can be used right-side up, sideways, and even upside down.

Keep oil out of soil and fuel out of drains. These sorbents cling to oil but let water pass through, so you can leave them outside for weeks to catch oil spills and leaks.

Made from 80% recycled newsprint and cellulose, these sorbent pads, rolls, and socks are more absorbent than polypropylene sorbents.

Absorb spills, catch drips, and control leaks in clean room environments. These sorbents are cleaned and bagged and don’t release as much lint or dust as other sorbents.

No need to stock several sorbent sizes—these unfold for use as a pad, roll, or pillow.

Place these pads on 55-gallon drum tops to eliminate messy leaks and drips. They have two perforated drum hole cutouts.

These kits have everything you need to safely clean up acid and base spills.

Be prepared for a variety of chemical spills at your worksite.

Kapton® polyimide film is an excellent electrical insulator.

This film is made with virgin Teflon® PTFE resins. It can handle extreme temperatures and resists most solvents.

Often used for circuit-breaker housings, manifolds, and semiconductor components, Ultem PEI offers excellent electrical-insulating properties.

Stronger than PTFE, PVDF offers good chemical resistance. Comparable to Kynar and Solef, it’s widely used for pump parts, tank liners, and seals.

In addition to a low-friction surface that prevents sticking and binding, this tough material is impact and wear resistant to handle the scuffs, scrapes, and strikes that other plastics can’t.

Package food, textiles, and other products in wet environments. This film won’t absorb or swell from water.

A polyester string reinforcement gives this material better tear resistance than standard LDPE film.

This film is often used as a separator when heating parts in an oven.

An aluminum coating on one side of this film reflects heat, so it’s widely used as an insulator and in packaging applications.

Because PVC resists many acids and alkalies, it’s widely used for tanks and in chemical-processing applications. Also known as PVC Type 1.

Carbon mesh is embedded into this clear PVC film to dissipate electrostatic discharge and protect sensitive electronic equipment.

Laminate or mold this plastic film onto credit card signing screens, signs, and other surfaces for a see-through protective layer that won’t scratch.

Polyester absorbs almost no moisture and resists swelling in wet environments. It is also known as PET and PETE.

Stronger and more chemical resistant than FEP and PFA film, ETFE film resists cracking over time.

At only half the weight of glass, polycarbonate maintains excellent impact resistance across a wide temperature range. It's comparable to Lexan, Hyzod, Tuffak, and Makrolon.

Great for use outdoors, these durable pads are neoprene rubber, which withstands exposure to direct sunlight.

These soft pads work well for isolating vibration with light loads such as lab and testing equipment.

Made of fiber-reinforced PVC, these pads endure exposure to corrosive chemicals, such as cleaning solvents, chlorine, and hydrochloric acid.

Shield surfaces from impact, reduce vibration and noise, and stabilize connection points with these packs of pads—they’re reinforced with fabric to endure extreme compression without deforming. They’re also known as bearing pads.

Thick foam pads provide a layer of comfort when working on your knees.

Cover floors with these temporary protectors. Adhesive on the back keeps them in place better than taped paper, and they can be left for up to 30 days.

Pads heal themselves to seal surface nicks and cuts.

With a smaller footprint than other switch mats, these fit in confined spaces.

At only 3/32" thick, these mats fit under carpeting or anywhere else you want to hide them.

Prevent personnel from getting too close to dangerous equipment when equipment is on—these mats turn equipment off when someone steps on them or when a fault is detected.

Customize the length of these switches by cutting them from a 50-foot roll.

Place either side of these mats against your work surface.