Remove oxidation, discoloration, and heat stains from most metals without causing pitting or other surface damage.

Restore and maintain the surface layer on stainless steel that protects it from corrosion. Also known as passivating fluids.

Clean and restore shine to stainless steel surfaces. These cleaners leave a finish that resists dirt, oil, and water spots.

Clean, polish, and protect aluminum, brass, copper, chrome, and stainless steel with this polish. It removes oxidation, tarnish, and surface rust without scratching or dulling brushed finishes.

Polish molds, dies, fixtures, and molded materials. This polish removes plate-out, oxidation, and stains.

More effective than water-based degreasers, these solvent-based degreasers cut through the toughest grease and oils.

Biodegradable and nonflammable, these water-based degreasers cut through grease and oils without harsh chemicals.

Use these nonflammable solvents in vapor degreasing systems to ensure precision parts are clean and residue free.

Often used on the outside of cooling towers and condensers, these scale removers cling to vertical surfaces to dissolve scale and mineral deposits.

Dissolve scale and mineral buildup in drinking water systems with these scale removers. They meet NSF/ANSI Standard 60 for use with components that come into contact with drinking water.

Stronger than our standard floor cleaners, these cleaners remove even the toughest soils and grease from floors to help prevent slips and falls.

Let your drill do the scrubbing and scouring for you.

Scrub out kettles, fryers, and other equipment without fear of contaminating food lines—these pads set off your metal detector if they fall into your line.

The handle on these pads has a 360° swivel socket for scrubbing grease and grime from hard-to-reach areas.

Aggressive cleaning without scratching, this scouring block is made of a chemical-resistant foam block with a handle.

Evenly sand two surfaces at once.

A cushioned layer gives you more control over sanding pressure, creating finer and more consistent finishes. These rolls can be cut to length.

Sized for tight spaces, these small pads sand flat and curved surfaces. They have a flexible foam layer that gives you more control over sanding pressure, creating finer and more consistent finishes.

The soft abrasive is good for fine hand-polishing of metal surfaces that require the smoothest finish possible after an abrasive sequence. Also known as crocus cloth.

The grit particles are block shaped and cut slowly.

The soft abrasive is good for fine hand-polishing of metal surfaces that require the smoothest finish possible after an abrasive sequence. Also known as crocus cloth.

The dental floss of abrasives, these cords slip into areas that other forms cannot. They're good for deburring and polishing small holes, narrow slots, keyways, and grooves.

These assortments include three cut-to-length sanding rolls of various grits in a convenient dispenser.

These sheets resist deterioriation when used wet or with grease, chemicals, cutting fluids, and other solvents that may be present when sanding.

Keep an assortment of sheets that prevent dust and debris from building up on the abrasive surface close at hand.

Assortments include three cut-to-length sanding rolls of various grits that resist deterioration when used wet or with grease, chemicals, cutting fluids, and other solvents.

These cut-to-length rolls resist deterioration when used wet or with grease, chemicals, cutting fluids, and other solvents that may be present when sanding. A layer of mesh lets sanding dust and debris escape during use, preventing material buildup on the abrasive surface.

The dental floss of abrasives, these cords slip into areas that other forms cannot. They're good for deburring and polishing small holes, narrow slots, keyways, and grooves.

Create consistent finishes on stainless steel, titanium, steel, iron, and nickel.

Cut the length you need, then stick to your sanding tool. When it's time to change the sheet, peel it off.

Cut the length you need, then quickly attach, remove, and reuse.

Quickly attach, remove, and reuse these hook-and-loop sheets with pole sanders.

Quickly attach, remove, and reuse these hook-and-loop sheets with triangular detail sanders.

A coating prevents dust and debris from building up on the abrasive surface.

Good for use on bronze and hard woods, this wool won't leave behind small fibers that cause rust.

This nonsparking, gauze-like mesh is good for a range of tasks, from surface cleaning to rust removal. It won't snag or leave strands on your work surface.

Lighter and softer than other corrosion-resistant metal wools, aluminum also won't leave behind small fibers that cause rust. This cut-to-length wool is good for cleaning and finishing aluminum.

Lighter and softer than other corrosion-resistant metal wools, aluminum also won't leave behind small fibers that cause rust. This wool is good for cleaning and finishing aluminum.

This gauze creates a smooth finish and won't snag or leave strands on your work surface.

Clean grease and oil from parts.