Place these scales on your bench top to handle weighing jobs right where you work.

A stainless steel housing and platform resist corrosion in wet conditions and harsh environments.

Count parts and weigh materials sold by weight.

IP69K and NTEP approved as legal for trade, use these scales in washdown environments for material that may be sold by weight.

Similar in style to a hand truck, this scale tilts back on two rubber wheels to move.

Position the display up to 14 feet from the platform for reading at a safe distance.

Determine the approximate weight of large, bulky materials that are impractical to weigh with a floor scale. These scales are often used in loading vehicles and can be suspended from a crane, block and tackle lift, A-frame, or forklift blade.

A sealed aluminum housing protects from corrosion in wet environments.

Press the side of the gauge tip against an object to record the amount of tension required to move it.

Use the included Windows-compatible software to upload measurement data.

Safely view your tension force measurements on a handheld receiver up to 450 ft. away when moving bulk material with cranes and hoists.

Place your tool and the included square drive connector on the tester and turn.

Measure the twisting force needed to tighten or loosen caps and knobs with these torque testers.

Measure the force of hand and non-impact electric torque screwdrivers to keep fasteners from failing due to under or overtightening.

A calibration certificate traceable to NIST is included with these stainless steel rulers.

Rulers have large numbers and deeply etched graduations.

Ensure accurate measurements with these certified rulers.

Ensure reliable, repeatable measurements with these rulers.

These rulers include a certificate of calibration traceable to NIST with test measurements that confirm accuracy.

Protect your ruler from scratches and wear with a TiN (titanium nitride) coating.

Measurements are printed from top to bottom for measuring heights and depths.

Use to measure heights and tank levels.

The blade locks in place when extended until you press the release lever, and a magnetic-hook tip attaches to metal surfaces to assist vertical and distance measuring.

These tape measures have a chrome-plated, impact-resistant plastic case.

Compared to standard tape measures, these are less than half the size.

Ensure accurate measurements with certified tape measures.

Slide the lock to hold the blade in place. The case is chrome-plated, impact-resistant plastic.

Measure from a distance—the blade on these tape measures remains rigid when extended up to 11 feet.

For a comfortable and secure hold, these tape measures have a narrow case with a molded rubber grip.

Accurately measure diameter.

These reliable tape measures include a calibration certificate traceable to NIST stating they have passed a test for accuracy.

Measure distances over 35 ft.

Connect continuous segments to create a ruler up to 10 ft. long.

This digital readout system displays precise positioning on one axis. For use with machines that perform dry machining and cutting applications, such as table saws, band saws, planers, and drill presses.

Install a digital readout stop and fence system onto the setup for your miter, chop, or radial arm saw. It displays measurements on one axis, allowing you to cut pieces up to 94" with high precision.

Reach deep into small holes and slots for precise depth measurements.

Replace your try square, miter square, depth gauge, height gauge, center-point finder, and level. The blade on these squares meets Fed. Spec. GGG-R-791H, which establishes uniform standards for accuracy, graduations, and size.

Blades are for use with High-Accuracy Combination Square Heads.

Attach to High-Accuracy Combination Square Blades with the included lockbolts.

A titanium coating protects the blade against scratches and wear.

Ensure reliable, repeatable angles.

These squares meet Fed. Spec. GGG-S-656-E, which establishes uniform standards for square accuracy to ensure reliable, repeatable angles.

Measure and mark material exactly where you need to with a sliding blade.

Pipe fitting sizes and welding charts are shown on this square in wear-resistant etched markings.

Use these protractors to measure angles and dimensions.

Set bevels and measure angles. Also known as bevel protractors, these have an adjustable arm.

Take precise measurements with this protractor.

These tools have front and back digital displays, as well as horizontal and vertical vials.

A dot laser extends the working distance 200 feet beyond the tool length. This tool has two digital displays that invert when turned upside down; one shows the base angle and the other shows the moveable arm angle.

These angle indicators come with a calibration certificate that's traceable to NIST and includes the test measurements that confirm accuracy.

These angle indicators have a horizontal leveling vial and can measure angles between 0° and 180°.

Also known as safety scales, these gauges confirm that the gaps between the grinding wheel and the tool rest and tongue comply with OSHA and ANSI requirements.

The sturdy box-style housing has precision-machined leveling surfaces to ensure accuracy.

Glow-in-the-dark vials are easy to read in low light.

Align and measure at the same time with these levels that have rulers on the front and side.

These levels have a sturdy aluminum housing.