Instead of attaching your round body air cylinder directly to equipment, add a mount to best suit your application.

Minimize the release of particles that can damage electronics or contaminate batches as you push and pull light loads. These air cylinders are designed with seals and caps that prevent particles from escaping.

Connect these mounts to an air cylinder to create linear, pivot, or arc movements. These mounts are compatible with ISO tie rod air cylinders.

These cylinders have self-adjusting cushions that automatically compensate for changes in load and speed.

Prevent sudden drops while raising and lowering grippers and other pick-and-place equipment.

Move optical equipment and other electronics sensitive to dust and fine particles from a range of mounting positions.

Push one object while pulling another—when one head on these air slides extends, the other retracts.

Mount these cylinders directly to equipment in environments where contamination is a concern, such as electronics manufacturing.

With an integrated valve and multiple mounting options, these air cylinders install quickly, right where you need them, to push and pull light loads.

Made from stainless steel for excellent corrosion resistance in damp environments.

The short body on these switches makes them suitable for tight spaces.

Eliminate the need to calculate the sensing distance when using different metals—these switches sense all metal at the same distance. Also known as K=1 sensors.

The flexible cable on these switches withstands applications that require frequent motion, such as robotics.

Sense objects as they pass through the switch’s ring via tubing or a funnel. These switches are often used to monitor blockages, detect breaks in spooling wire, or count small metallic parts, such as screws, during the stamping process.

About half the length of our other flat-body proximity switches, these switches fit in crowded spaces and along rails.

These inductive proximity switches sense metallic objects each time they pass through the slot, even when they’re obscured by water, oil, dirt, or a surface finish. Use them to measure the speed of rotating equipment and to count or detect moving objects, such as sheet metal being fed into a stamping process.

Twist the sensor to detect metallic objects where explosive dust or gas may be present—the sensor rotates for front, side, top, or bottom sensing. These switches are UL and C-UL listed as well as ATEX and IECEx certified for hazardous locations.

These intrinsically safe switches detect objects as they’re routed through the ring. They produce a low-current, low-voltage NAMUR signal, so they won’t ignite or create sparks. Switches are ATEX certified to protect against explosion.

For use in volatile areas, these intrinsically safe switches detect objects when they pass through the slot. They use a NAMUR signal to operate at a low current and voltage, so they won’t ignite or create sparks. ATEX and IECEx certified, they protect against explosion.

Rotate the face on these switches five different directions for easy installation and positioning—they work with both AC and DC inputs.

These switches have a longer sensing distance compared to other proximity switches with the same diameter.

Switches accept both AC and DC input voltage.

These switches have a receiver built into the housing, eliminating the need to align components and measure sensing distance during installation.

Detect objects as thin as a freshly sharpened pencil tip. These switches are best for tight spaces because they have a smaller light beam and can detect smaller objects than standard photoelectric switches.

Rated IP69K, these switches can withstand high-pressure, high-temperature washdowns and temporary submersion.

About half the size of most standard photoelectric switches, these fit comfortably in tight spaces. The transmitter and receiver are built into the housing, so you don’t need to align components or measure sensing distance to install them.

Easily mount these flat switches to a base or rail.

Rated NEMA 4X, 6P, IP68 and IP69K, these switches resist corrosion and high-pressure, high-temperature washdowns, and can withstand temporary submersion.

Support flow and temperature control in your system with these intrinsically safe switches, which sense when a valve is open or closed in volatile areas. They are ATEX and IECEx certified to protect against explosion.