The standard for high-strength fastening.

Use these general purpose 18-8 stainless steel screws for a variety of fastening applications. They have good chemical resistance.

More corrosion resistant than 18-8 stainless steel screws, these 316 stainless steel screws have excellent resistance to chemicals and salt water.

Often used to fasten parts in engines and turbines, these are our strongest stainless steel screws. They are comparable in strength to alloy steel with the corrosion resistance of 18-8 stainless steel.

Brass screws are electrically conductive, nonmagnetic, and have good corrosion resistance.

Aluminum screws are one-third the weight of steel and have good corrosion resistance.

Made of alloy steel, these low-profile screws are nearly twice as strong as their stainless steel counterparts. With half the height of a standard socket head, these low-profile screws fit in tight spaces.

More corrosion resistant than 18-8 stainless steel screws, these 316 stainless steel screws have excellent resistance to chemicals and salt water. Use these low-profile screws where space is limited.

More corrosion resistant than 18-8 stainless steel screws, these 316 stainless steel screws have excellent resistance to chemicals and salt water. Their ultra-low-profile lets them fit in the tightest spaces.

Serrations under the head grip the material's surface for mild vibration resistance. The flange distributes pressure across the material's surface, eliminating the need for a washer.

With a tensile strength of 170,000 psi, these alloy steel screws are among the strongest we carry. They are stronger than Grade 8 steel screws and are nearly two and a half times stronger than stainless steel thread-locking screws. They have a thread locker to prevent loosening from vibration.

The nylon patch bonded to the threads of these socket head screws adds friction to keep vibration from loosening them, while their O-ring prevents leaks and seals out contaminants.

Seal out contaminants and prevent leaks—a rubber O-ring under the head prevents leaks and seals out contaminants.

More corrosion resistant than 18-8 stainless steel screws, these metric screws have excellent resistance to chemicals and salt water. They may be mildly magnetic.

These metric brass screws are electrically conductive, nonmagnetic, and have good corrosion resistance.

To vent fluids and gases trapped under the screw, these metric screws are drilled through the shaft.

Closely spaced threads on these screws fit in holes with a fine pitch. They're not compatible with standard metric threads.

Made from brass, these metric button head screws are corrosion resistant in wet environments, nonmagnetic, and electrically conductive.

These metric alloy steel screws are nearly twice as strong as stainless steel button head screws. They have a flange that distributes pressure across a wide surface, eliminating the need for a separate washer.

These metric 316 stainless steel screws resist corrosion from chemicals and salt water better than 18-8 stainless steel screws. They have a flange that distributes pressure across a wide surface, eliminating the need for a separate washer. Screws may be mildly magnetic.

Made from aluminum, these metric screws are lightweight and resist corrosion in wet environments. The flange is wider and thicker than our other flanged screws, so they distribute pressure the best.

These metric 18-8 stainless steel screws have good chemical resistance and may be mildly magnetic. A nylon patch bonded to the threads adds friction to prevent loosening from vibration.

These alloy steel set screws have a thin edge that digs into hard surfaces for a secure hold. They're available in metric sizes.

These metric 316 stainless steel set screws have excellent chemical resistance and can be used in saltwater environments.

These metric 18-8 stainless steel set screws are chemical resistant. They have serrations on the cup edge that grip the material surface to resist loosening.

Made from 18-8 stainless steel, these metric set screws are chemical resistant. They have a nylon locking patch that grips threads to resist loosening.

These metric set screws have a tip that makes good contact on flat surfaces and allows you to make frequent adjustments with minimal surface damage.

These metric 316 stainless steel set screws have excellent chemical resistance and can be used in saltwater environments. The tip makes good contact on flat surfaces and allows you to make frequent adjustments with minimal surface damage.

Made of chemical-resistant 18-8 stainless steel, these metric screws have an extra-soft nylon tip that reduces the noise, vibration, and damage that can occur from metal-on-metal contact. Use them on soft surfaces such as aluminum.

Available in metric sizes, these screws have a tip that is harder than nylon and silver to provide a secure hold on hard surfaces. The body is 18-8 stainless steel for good chemical resistance.

Fine threads give you precise control.

Also known as dog-point set screws, these metric set screws have a protruding tip that locks within a mating hole or slot to keep parts aligned. Made of 18-8 stainless steel, they have good chemical resistance.

These metric 18-8 stainless steel set screws are chemical resistant. A pointed tip wedges into the contact surface for a secure hold on soft materials such as brass.

With inch-sized threads the same diameter as the shoulder, these screws can handle heavy loads. They’re 18-8 stainless steel for good chemical resistance.

For metric thread sizes with excellent resistance to chemicals and salt water, choose these 316 stainless steel shoulder screws.

Use these screws in thin materials; they have a shorter threaded portion than our standard shoulder screws. They’re comparable in strength to Grade 8 steel.

Also known as wheel and axle bolts, these metric screws have an unthreaded shoulder that acts as a shaft, so material attached to the threaded end can rotate.

These metric screws have a head height that's about two-thirds the head height of a standard shoulder screw. Use them in low-clearance applications such as inside machines.

These screws have a head height about one-third the head height of a standard shoulder screw. Use them in low-clearance applications such as inside machines.

Install and remove these metric shoulder screws by hand or with a hex key.

Offered in metric sizes, these brass shoulder screws are electrically conductive, nonmagnetic, and have good corrosion resistance.

These assortments include button head screws.