We will reply to your message within an hour.
Strong and durable, these multipurpose bits are for use with bit screwdrivers.
The toughest bits available, these withstand the shock and twisting force of impact drivers.
When you don't have exact alignment between the fastener and the tool, the ball end allows angled entry to turn screws in hard-to-reach areas.
Protect your stainless steel screws by using a stainless steel bit. If steel flakes off a standard bit and into the recess, it can lead to rust and contamination. These bits eliminate that risk.
When you don't have exact alignment between the fastener and the bit, the ball end allows angled entry to turn screws in hard-to-reach areas. A retaining ring grips inside the recess to hold screws in place.
A retaining ring at the tip grips inside the recess to ensure screws won't slip off the bit.
An opening at the tip accommodates the pin in the recess of tamper-resistant hex screws. These are also known as pin-in-hex or pin-in-socket bits.
A magnet or retaining ring holds the nut in place.
Turn hex nuts and cap screws.
A retaining ring grips inside the recess to hold screws in place. These bits have a ball end that allows angled entry to drive screws in hard-to-reach areas.
Assortments contain bits with multiple drive styles.
The knurled shank on these bits allows finger tightening. They can also be used with the included screwdriver.
Eliminate the need for multiple bulky tools with these bit adapters. At less than 3 inches long, these compact adapters convert ¼” bit screwdriver handles and ¼” bits into torque screwdrivers so you can fasten to a specific torque.
Create your own tool by attaching these shafts to a handle, or use with socket wrenches and power tools. They have a ball end that allows angled entry to make good contact with the recess when a standard-tip shaft can’t.
Insert a bit into the shaft and a magnet holds it in place.
The T-handle provides a good grip for your whole hand and the long shaft reaches into tight spots.
Sets include assorted keys with long shafts that reach into tight spots. The plastic-covered handles provide a good grip for your whole hand.
When working in tight spaces, these short keys fit where others can't.
Sets include an assortment of short keys that fit in tight spaces where others can't.
When a standard-tip key can't make good contact with the recess, a ball end allows angled entry to turn screws in hard-to-reach places.
These assorted keys have a ball end that allows angled entry to make good contact with the screw recess when standard-tip keys can’t.
When a standard-tip key can't make good contact with the recess, a ball end allows angled entry to turn screws in hard-to-reach places. These keys have a textured grip that provides comfort, slip resistance, and maximum torque.
These assorted keys have a ball end that allows angled entry to make good contact with the screw recess when standard-tip keys can’t. The textured grip provides comfort, slip resistance, and maximum torque.
The textured grip provides comfort, slip resistance, and maximum torque. These keys have a long shaft for reaching into tight spots to turn fasteners.
These assorted keys have a textured grip that provides comfort, slip resistance, and maximum torque. They have a long shaft for reaching into tight spots to turn fasteners.
With a simple loop handle, these keys are the economical choice. They have a long shaft for reaching into tight spots and the T-handle provides a good grip for your whole hand when turning fasteners.
The economical choice, these sets include an assortment of keys with a simple loop handle. The long shaft reaches into tight spots and the T-handle provides a good grip for your whole hand when turning fasteners.
These sets include an assortment of keys with a ball end on the long shaft, which allows angled entry to turn screws in hard-to-reach areas. The short shaft provides additional torque.
The extra-long shaft lets you access fasteners in deep recesses. To change tips, use a hex key to loosen the set screw.
These assorted keys have an extra-long shaft that provides access to fasteners in deep recesses. To change tips, use a hex key to loosen the set screw.
These assorted keys have a ball-end tip with a retaining ring that grips inside the recess to hold screws in place and allows angled entry to turn fasteners in hard-to-reach areas.
The ball-end tip has a retaining ring that grips inside the recess to hold screws in place and allows angled entry to turn fasteners in hard-to-reach areas.
Protect your stainless steel screws by using a stainless steel key. If steel flakes off a standard tool and into the recess, it can lead to rust and contamination. These keys eliminate that risk.
Sets include an assortment of keys with a long shaft for more reach and a short shaft for more torque. Use stainless steel keys to protect your stainless steel screws. If steel flakes off a standard tool and into the recess, it can lead to rust and contamination. These keys eliminate that risk.
An insulated handle and shaft protect against shock from accidental contact with live electrical circuits. These tools are tested to 1,000 volts to meet IEC and ASTM standards. They have a long shaft that reaches into tight spots to turn fasteners.
The assorted keys in these sets have an insulated handle and shaft that protect against shock from accidental contact with live electrical circuits. These tools are tested to 1,000 volts to meet IEC 60900 and ASTM F1505-01. They have a long shaft that reaches into tight spots to turn fasteners.
Extra-long bits allow access to hard-to-reach fasteners.
The short bit on these sockets fits in spaces where height clearance is limited.
The ball end allows angled entry when you don't have exact alignment between the socket bit and fastener.
These sockets are also known as pin-in-hex or pin-in-socket bits.
Made of aluminum-bronze, these sockets satisfy OSHA requirements that specify nonsparking tools for locations where flammable vapors and combustible residues are present.
Pivot the head to access fasteners from an angle.
With a plastic insert, these sockets firmly grip hex nuts and bolts without rounding them or scratching highly polished finishes.
Turn many sizes of square, hex, and 8-point fasteners with one socket. Place over the fastener and 54 pins move to grip it securely.
Often used with an extension, these sockets turn fasteners and fittings in obstructed areas that a regular socket can't reach. They are also known as crowfoot wrenches.
A rubber insert grips the plug to prevent damage.
Achieve the best possible grip on hex fasteners and prevent rounding.
A magnet holds the fastener securely enough to drive self-tapping screws.
Tighten or loosen nuts and bolts without damaging the finish.
The 12-point shape quickly positions on hex fasteners.
Designed to remove and install dual wheels on trucks and trailers, these sockets have a hex recess for accessing lug nuts and a square recess to turn the threaded shafts found on inner wheels.
Use bit sockets as an alternative to a screwdriver or L-key.
Keep a convenient mix of hex, Torx, Phillips, and slotted bit sockets on hand.
Suitable for occasional maintenance work, these sets are imported.
Made in the U.S.A., these tools handle the toughest industrial applications, provide the best grip on fasteners, and have a superior finish.
Turn nuts on bolts and threaded rod, which pass through these sockets.
Use these sockets as an alternative to a screwdriver or L-key. They are made to withstand the high torque and force of impact tools.
The hex shape grips hex fasteners and prevents rounding. These sockets are made to withstand the high torque and force of impact tools.
Insert directly into power screwdrivers, impact drivers, and other tools that accept a 1/4" hex shank.
Use for drilling in most metal.