Metric Internal Retaining Rings

Filter by

Retaining Ring Type

Ring OD

Ring Thickness

Retaining Ring Style

Material

Groove Diameter

Groove Width

Specifications Met

Finish

Ring ID

Side-Mount External Retaining Rings Included

For 3 mm OD (20 Pieces)

For 4 mm OD (20 Pieces)

For 5 mm OD (20 Pieces)

For 6 mm OD (20 Pieces)

For 7 mm OD (20 Pieces)

For 8 mm OD (20 Pieces)

For 10 mm OD (10 Pieces)

For 12 mm OD (10 Pieces)

Thrust Load Capacity

Less than 10,000 lbf

10,000 lbf to 19,999 lbf

20,000 lbf to 29,999 lbf

30,000 lbf to 99,999 lbf

100,000 lbf or greater

Magnetic Properties

Magnetic

May Be Mildly Magnetic

Minimum Hardness

REACH

Number of Pieces

U.S.–Mexico–Canada Agreement (USMCA) Qualifying

Yes

Export Control Classification Number (ECCN)

RoHS

Hardness

DFARS Specialty Metals

Performance

Passivation

Container Features

406 Products

Retaining Ring Type

External

Secure components on a shaft

1 product

Retaining Ring Style

Tapered

Maintain 360-degree contact with the groove for a sure hold

249 products

Retaining Ring Style

Side Mount

When you can't access the ends of a shaft, install rings from the side

1 product

Spiral

Install coiled rings by hand without the need for tools

140 products

Internal Retaining Rings

Secure components inside a housing or bore with our go-to internal retaining rings. Shaped in the most common style, these are tapered so the thickest section is opposite their opening for a secure 360-degree hold. Squeeze with retaining ring pliers and release into a groove.

Ring OD is measured with the ring uninstalled.

Phosphate-Coated Carbon Steel—The most popular choice, these are strong and wear resistant. Their finish adds some corrosion resistance, but only to minimal dampness.

Zinc-Plated Carbon Steel—These rings are strong with good wear resistance. They provide some corrosion resistance, but not as much as stainless steel rings.

1.4122 Stainless Steel—Corrosion and wear resistant rings that won't break down from rubbing against other metal.

	Retaining Rings											Pliers
		For Groove, mm		Ring, mm
	For ID, mm	Dia.	Wd.	OD	Thk.	Thrust Load Cap., lbf	Min. Hardness	Specs. Met.	Pkg. Qty.		Pkg.		Each
Phosphate-Coated Carbon Steel



		8	8.4	0.9	8.7	0.8	450	Rockwell C47	DIN 472	50	98455A108	00000	5449A65	000000


		9	9.4	0.9	9.8	0.8	450	Rockwell C47	DIN 472	50	98455A109	0000	5449A65	00000
		10	10.4	1.1	10.8	1	890	Rockwell C47	DIN 472	50	98455A110	0000	5449A65	00000
		11	11.4	1.1	11.8	1	890	Rockwell C47	DIN 472	50	98455A111	0000	5449A65	00000
		12	12.5	1.1	13	1	890	Rockwell C47	DIN 472	50	98455A112	0000	5449A65	00000
		13	13.6	1.1	14.1	1	940	Rockwell C47	DIN 472	50	98455A113	0000	5449A65	00000
		14	14.6	1.1	15.1	1	1,010	Rockwell C47	DIN 472	50	98455A114	0000	5449A91	00000
		15	15.7	1.1	16.2	1	1,120	Rockwell C47	DIN 472	50	98455A115	0000	5449A91	00000
		16	16.8	1.1	17.3	1	1,230	Rockwell C47	DIN 472	50	98455A116	0000	5449A91	00000
		17	17.8	1.1	18.3	1	1,340	Rockwell C47	DIN 472	50	98455A117	0000	5449A91	00000
		18	19	1.1	19.5	1	1,460	Rockwell C47	DIN 472	50	98455A119	0000	5449A91	00000


		19	20	1.1	20.5	1	1,520	Rockwell C47	DIN 472	50	98455A224	00000	5449A91	00000
		20	21	1.1	21.5	1	1,610	Rockwell C47	DIN 472	50	98455A120	0000	5449A91	00000
		21	22	1.1	22.5	1	1,700	Rockwell C47	DIN 472	50	98455A121	00000	5449A91	00000
		22	23	1.1	23.5	1	1,790	Rockwell C47	DIN 472	50	98455A122	00000	5449A91	00000
		23	24.1	1.3	24.6	1.2	1,790	Rockwell C47	DIN 472	25	98455A123	0000	5449A91	00000
		24	25.2	1.3	25.9	1.2	3,120	Rockwell C47	DIN 472	25	98455A124	0000	5449A91	00000
		25	26.2	1.3	26.9	1.2	3,280	Rockwell C47	DIN 472	25	98455A125	0000	5449A91	00000
		26	27.2	1.3	27.9	1.2	3,100	Rockwell C47	DIN 472	25	98455A226	0000	5449A92	00000
		27	28.4	1.3	29.1	1.2	2,990	Rockwell C47	DIN 472	25	98455A135	0000	5449A92	00000
		28	29.4	1.3	30.1	1.2	2,990	Rockwell C47	DIN 472	25	98455A126	00000	5449A92	00000


		29	30.4	1.3	31.1	1.2	3,050	Rockwell C47	DIN 472	25	98455A158	0000	5449A92	00000
		30	31.4	1.3	32.1	1.2	3,080	Rockwell C47	DIN 472	10	98455A127	0000	5449A92	00000
		31	32.7	1.3	33.4	1.2	3,100	Rockwell C47	DIN 472	25	98455A719	0000	5449A92	00000
		32	33.7	1.3	34.4	1.2	3,100	Rockwell C47	DIN 472	10	98455A129	0000	5449A92	00000
		33	34.7	1.3	35.5	1.2	3,210	Rockwell C47	DIN 472	10	98455A721	0000	5449A92	00000
		34	35.7	1.6	36.5	1.5	5,890	Rockwell C47	DIN 472	10	98455A131	0000	5449A92	00000
		35	37	1.6	37.8	1.5	6,040	Rockwell C47	DIN 472	10	98455A722	0000	5449A92	00000
		36	38	1.6	38.8	1.5	5,930	Rockwell C47	DIN 472	10	98455A134	0000	5449A92	00000
		37	39	1.6	39.8	1.5	6,090	Rockwell C47	DIN 472	10	98455A723	00000	5449A92	00000
		38	40	1.6	40.8	1.5	6,340	Rockwell C47	DIN 472	10	98455A137	0000	5449A92	00000


		39	41	1.6	42	1.5	6,470	Rockwell C47	DIN 472	10	98455A724	0000	5449A92	00000
		40	42.5	1.85	43.5	1.75	10,000	Rockwell C47	DIN 472	5	98455A139	0000	5449A92	00000
		41	43.5	1.85	44.5	1.75	10,110	Rockwell C47	DIN 472	10	98455A725	0000	5449A92	00000
		42	44.5	1.85	45.5	1.75	10,000	Rockwell C47	DIN 472	5	98455A169	0000	5449A92	00000
		43	45.5	1.85	46.5	1.75	10,000	Rockwell C47	DIN 472	10	98455A726	0000	5449A92	00000
		44	46.5	1.85	47.5	1.75	9,730	Rockwell C47	DIN 472	5	98455A236	0000	5449A92	00000
		45	47.5	1.85	48.5	1.75	9,680	Rockwell C47	DIN 472	5	98455A141	0000	5449A92	00000
		46	48.5	1.85	49.5	1.75	9,640	Rockwell C47	DIN 472	5	98455A297	0000	5449A92	00000
		47	49.5	1.85	50.5	1.75	9,770	Rockwell C47	DIN 472	10	98455A727	0000	5449A92	00000
		48	50.5	1.85	51.5	1.75	9,710	Rockwell C47	DIN 472	5	98455A312	0000	5449A92	00000


		50	53	2.15	54.2	2	13,600	Rockwell C44	DIN 472	5	98455A142	0000	5449A92	00000
		52	55	2.15	56.2	2	13,500	Rockwell C44	DIN 472	1	98455A362	0000	5449A92	00000
		53	56	2.15	57.2	2	13,640	Rockwell C44	DIN 472	5	98455A728	0000	5449A92	00000
		54	57	2.15	58.2	2	13,500	Rockwell C44	DIN 472	1	98455A364	0000	5449A92	00000
		55	58	2.15	59.2	2	13,500	Rockwell C44	DIN 472	5	98455A144	0000	5449A92	00000
		56	59	2.15	60.2	2	13,500	Rockwell C44	DIN 472	1	98455A367	0000	5449A92	00000
		57	60	2.15	61.2	2	13,660	Rockwell C44	DIN 472	5	98455A729	0000	5449A92	00000
		58	61	2.15	62.2	2	13,600	Rockwell C44	DIN 472	1	98455A384	0000	5449A92	00000
		60	63	2.15	64.2	2	13,700	Rockwell C44	DIN 472	1	98455A146	0000	5449A92	00000
		62	65	2.15	66.2	2	13,600	Rockwell C44	DIN 472	1	98455A395	0000	5449A93	00000

63	66	2.15	67.2	2	13,660	Rockwell C44	DIN 472	5	98455A731	00000	5449A93	00000
64	67	2.15	68.2	2	13,600	Rockwell C44	DIN 472	1	98455A404	0000	5449A93	00000
65	68	2.65	69.2	2.5	27,200	Rockwell C44	DIN 472	1	98455A147	0000	5449A93	00000
67	70	2.65	71.5	2.5	27,200	Rockwell C44	DIN 472	5	98455A732	00000	5449A93	00000
68	71	2.65	72.5	2.5	26,700	Rockwell C44	DIN 472	1	98455A423	0000	5449A93	00000
70	73	2.65	74.5	2.5	26,700	Rockwell C44	DIN 472	1	98455A149	0000	5449A93	00000
72	75	2.65	76.5	2.5	26,700	Rockwell C44	DIN 472	1	98455A428	0000	5449A93	00000
75	78	2.65	79.5	2.5	26,500	Rockwell C44	DIN 472	1	98455A150	0000	5449A93	00000
76	79	2.65	80.5	2.5	26,700	Rockwell C44	DIN 472	1	98455A454	0000	5449A93	00000
78	81	2.65	82.5	2.5	27,400	Rockwell C44	DIN 472	1	98455A459	0000	5449A93	00000
80	83.5	2.65	85.5	2.5	26,900	Rockwell C44	DIN 472	1	98455A151	0000	5449A93	00000
82	85.5	2.65	87.5	2.5	26,700	Rockwell C44	DIN 472	1	98455A528	0000	5449A93	00000
85	88.5	3.15	90.5	3	45,100	Rockwell C44	DIN 472	1	98455A153	0000	5449A93	00000
88	91.5	3.15	93.5	3	46,900	Rockwell C44	DIN 472	1	98455A578	0000	5449A93	00000
90	93.5	3.15	95.5	3	44,700	Rockwell C44	DIN 472	1	98455A156	0000	5449A93	00000
92	95.5	3.15	97.5	3	45,100	Rockwell C44	DIN 472	1	98455A637	0000	5449A93	00000
95	98.5	3.15	100.5	3	43,800	Rockwell C44	DIN 472	1	98455A159	0000	5449A93	00000
98	101.5	3.15	103.5	3	42,900	Rockwell C44	DIN 472	1	98455A649	0000	5449A93	00000
100	103.5	3.15	105.5	3	42,200	Rockwell C44	DIN 472	1	98455A161	0000	5449A93	00000
105	109	4.15	112	4	98,010	Rockwell C44	DIN 472	1	98455A733	0000	5449A94	00000
110	114	4.15	117	4	93,200	Rockwell C44	DIN 472	1	98455A674	0000	5449A94	00000
115	119	4.15	122	4	91,940	Rockwell C44	DIN 472	1	98455A734	0000	5449A94	00000
120	124	4.15	127	4	89,000	Rockwell C44	DIN 472	1	98455A167	0000	5449A94	00000
125	129	4.15	132	4	86,550	Rockwell C44	DIN 472	1	98455A735	0000	5449A94	00000
130	134	4.15	137	4	84,000	Rockwell C44	DIN 472	1	98455A170	0000	5449A94	00000
135	139	4.15	142	4	80,480	Rockwell C44	DIN 472	1	98455A736	0000	5449A94	00000
140	144	4.15	147	4	78,600	Rockwell C44	DIN 472	1	98455A173	0000	5449A94	00000
145	149	4.15	152	4	75,530	Rockwell C44	DIN 472	1	98455A737	0000	5300A211	00000
150	155	4.15	158	4	73,200	Rockwell C44	DIN 472	1	98455A743	00000	5300A211	00000
155	160	4.15	164	4	72,830	Rockwell C44	DIN 472	1	98455A738	00000	5300A271	000000
160	165	4.15	169	4	72,100	Rockwell C44	DIN 472	1	98455A179	0000	5300A271	000000
165	170	4.15	174.5	4	71,710	Rockwell C44	DIN 472	1	98455A739	00000	5300A271	000000
170	175	4.15	179.5	4	78,400	Rockwell C44	DIN 472	1	98455A757	00000	5300A271	000000
175	180	4.15	184.5	4	78,900	Rockwell C44	DIN 472	1	98455A741	00000	5300A271	000000
180	185	4.15	189.5	4	78,000	Rockwell C44	DIN 472	1	98455A185	00000	5300A271	000000
185	190	4.15	194.5	4	78,450	Rockwell C44	DIN 472	1	98455A742	00000	5300A271	000000
190	195	4.15	199.5	4	76,400	Rockwell C44	DIN 472	1	98455A768	00000	5300A271	000000
200	205	4.15	209.5	4	73,000	Rockwell C44	DIN 472	1	98455A191	00000	5300A271	000000
210	216	5.15	222	5	135,000	Rockwell C40	DIN 472	1	98455A799	00000	5300A271	000000
220	226	5.15	232	5	129,000	Rockwell C40	DIN 472	1	98455A805	00000	5300A271	000000
230	236	5.15	242	5	123,000	Rockwell C40	DIN 472	1	98455A812	00000	5300A271	000000
240	246	5.15	252	5	118,000	Rockwell C40	DIN 472	1	98455A818	00000	5300A271	000000
250	256	5.15	262	5	113,000	Rockwell C40	DIN 472	1	98455A844	00000	5300A271	000000
260	268	5.15	275	5	120,000	Rockwell C40	DIN 472	1	98455A879	00000	5300A271	000000
270	278	5.15	285	5	116,000	Rockwell C40	DIN 472	1	98455A898	00000	5300A271	000000
280	288	5.15	295	5	112,000	Rockwell C40	DIN 472	1	98455A939	00000	5300A271	000000
290	298	5.15	305	5	108,000	Rockwell C40	DIN 472	1	98455A943	00000	5300A271	000000
300	308	5.15	315	5	104,000	Rockwell C40	DIN 472	1	98455A945	00000	5300A271	000000

Zinc-Plated Carbon Steel



		8	8.4	0.9	8.7	0.8	450	Rockwell C47	DIN 472	50	90301A110	0000	5449A65	00000


		9	9.4	0.9	9.8	0.8	450	Rockwell C47	DIN 472	50	90301A114	0000	5449A65	00000
		10	10.4	1.1	10.8	1	890	Rockwell C47	DIN 472	50	90301A161	0000	5449A65	00000
		11	11.4	1.1	11.8	1	890	Rockwell C47	DIN 472	50	90301A182	0000	5449A65	00000
		12	12.5	1.1	13	1	890	Rockwell C47	DIN 472	50	90301A183	0000	5449A65	00000
		14	14.6	1.1	15.1	1	1,010	Rockwell C47	DIN 472	50	90301A229	0000	5449A91	00000
		15	15.7	1.1	16.2	1	1,120	Rockwell C47	DIN 472	50	90301A231	00000	5449A91	00000
		16	16.8	1.1	17.3	1	1,230	Rockwell C47	DIN 472	50	90301A256	00000	5449A91	00000
		17	17.8	1.1	18.3	1	1,340	Rockwell C47	DIN 472	50	90301A284	00000	5449A91	00000
		18	19	1.1	19.5	1	1,460	Rockwell C47	DIN 472	50	90301A297	00000	5449A91	00000
		19	20	1.1	20.5	1	1,520	Rockwell C47	DIN 472	50	90301A326	00000	5449A91	00000


		20	21	1.1	21.5	1	1,610	Rockwell C47	DIN 472	50	90301A335	00000	5449A91	00000
		21	22	1.1	22.5	1	1,700	Rockwell C47	DIN 472	50	90301A337	00000	5449A91	00000
		22	23	1.1	23.5	1	1,790	Rockwell C47	DIN 472	50	90301A362	00000	5449A91	00000
		23	24.1	1.3	24.6	1.2	1,790	Rockwell C47	DIN 472	25	90301A389	0000	5449A91	00000
		24	25.2	1.3	25.9	1.2	3,120	Rockwell C47	DIN 472	25	90301A438	0000	5449A91	00000
		25	26.2	1.3	26.9	1.2	3,280	Rockwell C47	DIN 472	25	90301A453	0000	5449A91	00000
		26	27.2	1.3	27.9	1.2	3,100	Rockwell C47	DIN 472	25	90301A462	0000	5449A92	00000
		28	29.4	1.3	30.1	1.2	2,990	Rockwell C47	DIN 472	25	90301A472	0000	5449A92	00000
		30	31.4	1.3	32.1	1.2	3,080	Rockwell C47	DIN 472	10	90301A490	0000	5449A92	00000
		32	33.7	1.3	34.4	1.2	3,100	Rockwell C47	DIN 472	10	90301A493	0000	5449A92	00000


		34	35.7	1.6	36.5	1.5	5,890	Rockwell C47	DIN 472	10	90301A501	0000	5449A92	00000
		36	38	1.6	38.8	1.5	5,930	Rockwell C47	DIN 472	10	90301A516	0000	5449A92	00000
		38	40	1.6	40.8	1.5	6,340	Rockwell C47	DIN 472	10	90301A518	00000	5449A92	00000
		40	42.5	1.85	43.5	1.75	10,000	Rockwell C47	DIN 472	5	90301A546	0000	5449A92	00000
		45	47.5	1.85	48.5	1.75	9,680	Rockwell C47	DIN 472	5	90301A611	0000	5449A92	00000
		50	53	2.15	54.2	2	13,600	Rockwell C44	DIN 472	5	90301A641	00000	5449A92	00000
		55	58	2.15	59.2	2	13,500	Rockwell C44	DIN 472	5	90301A650	00000	5449A92	00000
		60	63	2.15	64.2	2	13,700	Rockwell C44	DIN 472	1	90301A686	0000	5449A92	00000
		65	68	2.65	69.2	2.5	27,200	Rockwell C44	DIN 472	1	90301A765	0000	5449A93	00000
		70	73	2.65	74.5	2.5	26,700	Rockwell C44	DIN 472	1	90301A816	0000	5449A93	00000


		75	78	2.65	79.5	2.5	26,500	Rockwell C44	DIN 472	1	90301A827	0000	5449A93	00000
		80	83.5	2.65	85.5	2.5	26,900	Rockwell C44	DIN 472	1	90301A831	0000	5449A93	00000
		85	88.5	3.15	90.5	3	45,100	Rockwell C44	DIN 472	1	90301A938	0000	5449A93	00000
		90	93.5	3.15	95.5	3	44,700	Rockwell C44	DIN 472	1	90301A971	0000	5449A93	00000


		1.4122 Stainless Steel



				8	8.4	0.9	8.7	0.8	450	Rockwell C47	DIN 472	10	98394A611	00000	5449A65	00000


				9	9.4	0.9	9.8	0.8	450	Rockwell C47	DIN 472	10	98394A653	00000	5449A65	00000
				10	10.4	1.1	10.8	1	890	Rockwell C47	DIN 472	5	98394A417	0000	5449A65	00000
				11	11.4	1.1	11.8	1	890	Rockwell C47	DIN 472	5	98394A421	0000	5449A65	00000
				12	12.5	1.1	13	1	890	Rockwell C47	DIN 472	5	98394A424	0000	5449A65	00000
				13	13.6	1.1	14.1	1	940	Rockwell C47	DIN 472	5	98394A425	0000	5449A65	00000
				14	14.6	1.1	15.1	1	1,010	Rockwell C47	DIN 472	5	98394A427	0000	5449A91	00000
				15	15.7	1.1	16.2	1	1,120	Rockwell C47	DIN 472	5	98394A429	00000	5449A91	00000
				16	16.8	1.1	17.3	1	1,230	Rockwell C47	DIN 472	5	98394A431	0000	5449A91	00000
				17	17.8	1.1	18.3	1	1,340	Rockwell C47	DIN 472	5	98394A433	00000	5449A91	00000
18				19	1.1	19.5	1	1,460	Rockwell C47	DIN 472	5	98394A434	0000	5449A91	00000


19	20			1.1	20.5	1	1,520	Rockwell C47	DIN 472	5	98394A435	00000	5449A91	00000
20	21			1.1	21.5	1	1,610	Rockwell C47	DIN 472	5	98394A437	00000	5449A91	00000
21	22			1.1	22.5	1	1,700	Rockwell C47	DIN 472	5	98394A439	00000	5449A91	00000
22	23			1.1	23.5	1	1,790	Rockwell C47	DIN 472	5	98394A440	00000	5449A91	00000
23	24.1			1.3	24.6	1.2	1,790	Rockwell C47	DIN 472	1	98394A441	0000	5449A91	00000
24	25.2			1.3	25.9	1.2	3,120	Rockwell C47	DIN 472	1	98394A443	0000	5449A91	00000
25	26.2			1.3	26.9	1.2	3,280	Rockwell C47	DIN 472	1	98394A444	0000	5449A91	00000
26	27.2			1.3	27.9	1.2	3,100	Rockwell C47	DIN 472	1	98394A445	0000	5449A92	00000
28	29.4			1.3	30.1	1.2	2,990	Rockwell C47	DIN 472	1	98394A447	0000	5449A92	00000
30	31.4			1.3	32.1	1.2	3,080	Rockwell C47	DIN 472	1	98394A450	0000	5449A92	00000


32	33.7			1.3	34.4	1.2	3,100	Rockwell C47	DIN 472	1	98394A453	0000	5449A92	00000
34	35.7			1.6	36.5	1.5	5,890	Rockwell C47	DIN 472	1	98394A467	0000	5449A92	00000
36	38			1.6	38.8	1.5	5,930	Rockwell C47	DIN 472	1	98394A471	0000	5449A92	00000
38	40			1.6	40.8	1.5	6,340	Rockwell C47	DIN 472	1	98394A475	0000	5449A92	00000
40	42.5			1.85	43.5	1.75	10,000	Rockwell C47	DIN 472	1	98394A479	0000	5449A92	00000
45	47.5			1.85	48.5	1.75	9,680	Rockwell C47	DIN 472	1	98394A488	0000	5449A92	00000
50	53			2.15	54.2	2	13,600	Rockwell C47	DIN 472	1	98394A496	0000	5449A92	00000
55	58			2.15	59.2	2	13,500	Rockwell C47	DIN 472	1	98394A504	0000	5449A92	00000
60	63			2.15	64.2	2	13,700	Rockwell C47	DIN 472	1	98394A512	0000	5449A92	00000
65	68			2.65	69.2	2.5	27,200	Rockwell C47	DIN 472	1	98394A520	00000	5449A93	00000


70	73			2.65	74.5	2.5	26,700	Rockwell C47	DIN 472	1	98394A524	00000	5449A93	00000
75	78			2.65	79.5	2.5	26,500	Rockwell C47	DIN 472	1	98394A528	00000	5449A93	00000
80	83.5			2.65	85.5	2.5	26,900	Rockwell C47	DIN 472	1	98394A538	00000	5449A93	00000
85	88.5			3.15	90.5	3	45,100	Rockwell C47	DIN 472	1	98394A552	00000	5449A93	00000
90	93.5			3.15	95.5	3	44,700	Rockwell C47	DIN 472	1	98394A556	00000	5449A93	00000
95	98.5			3.15	100.5	3	43,800	Rockwell C47	DIN 472	1	98394A560	00000	5449A93	00000
100	103.5			3.15	105.5	3	42,200	Rockwell C47	DIN 472	1	98394A686	00000	5449A93	00000

Side-Mount, Tapered External, Internal Retaining Rings Assortment

Cover all bases with multiple retaining ring types and styles. Use the retaining ring pliers to install external rings onto shafts and internal rings into bores and housings. When access to a shaft is limited, install the E-Style rings from the side of the shaft and lock them into the groove.

Phosphate-Coated Carbon Steel—The most popular choice, these are strong and wear resistant. Their finish adds some corrosion resistance, but only to minimal dampness.

	Includes	Side-Mount Retaining Ring Style	Tools Included	Specs. Met		Each
Phosphate-Coated Carbon Steel



	380	120 External Retaining Rings (For 8 mm to 20 mm OD) 120 Internal Retaining Rings (For 8 mm to 20 mm ID) 140 E-Style Side-Mount External Retaining Rings (For 3 mm to 12 mm OD)	E	Retaining Ring Pliers	DIN 6799	93352A100	0000000

Spiral Internal Retaining Rings

2 Turns

1 Turn

Coiled so you can install by hand without any tools. The coiling also keeps these rings from flying away during installation. Just insert one end into the groove, then wind the rest of the ring into place.

Ring OD is measured with the ring uninstalled.

Carbon Steel—The go-to choice. These rings have high strength and wear resistance, but they don't resist rust.

18-8 Stainless Steel—The choice for wet and outdoor environments. These rings resist rust, but they aren't as strong as carbon steel.

2 Turns—Wind two layers into the groove for more load distribution and overall force capacity.

1 Turn—Slide into place with one twist. These rings are useful in areas where there's limited space for installation.

		For Groove, mm		Ring, mm
	For ID, mm	Dia.	Wd.	OD	Thk.	Thrust Load Cap., lbf	No. of Turns	Specs. Met.	Pkg. Qty.		Pkg.
Carbon Steel



		14	14.6	1.1	14.74	0.94	2,560	1	DIN 472	10	92131A510	00000


		14	14.72	0.75	14.85	0.64	2,220	2	—	10	92602A310	00000
		15	15.7	1.1	15.85	0.94	2,740	1	DIN 472	10	92131A520	0000
		16	16.8	1.1	16.9	0.94	2,920	1	DIN 472	10	92131A530	0000
		17	17.8	1.1	17.97	0.94	3,110	1	DIN 472	10	92131A540	0000
		18	19	1.1	19.18	0.94	3,290	1	DIN 472	10	92131A550	0000
		19	20	1.1	20.25	0.94	3,470	1	DIN 472	10	92131A560	0000
		20	20.86	0.91	21.1	0.8	3,580	2	—	10	92602A320	00000
		20	21	1.1	21.2	0.94	3,650	1	DIN 472	5	92131A570	00000
		22	23	1.1	23.22	0.94	4,020	1	DIN 472	5	92131A580	00000
		24	25	0.91	25.2	0.8	4,300	2	—	10	92602A330	00000


		24	25.2	1.3	25.4	1.15	5,370	1	DIN 472	5	92131A590	00000
		25	26.2	1.3	26.45	1.15	5,600	1	DIN 472	5	92131A610	00000
		26	27.2	1.3	27.46	1.15	5,820	1	DIN 472	5	92131A620	00000
		26	27.26	1.07	27.5	0.94	5,470	2	—	10	92602A340	00000
		28	29.26	1.07	29.5	0.94	5,890	2	—	10	92602A350	00000
		28	29.4	1.3	29.68	1.15	6,270	1	DIN 472	5	92131A630	00000
		30	31.4	1.3	31.79	1.15	6,720	1	DIN 472	5	92131A640	00000
		32	33.32	1.22	33.57	1.1	7,880	2	—	10	92602A360	00000
		32	33.7	1.3	33.93	1.15	7,170	1	DIN 472	5	92131A650	00000
		34	35.7	1.6	36.04	1.44	9,060	1	DIN 472	5	92131A660	00000


		35	37	1.6	37.35	1.44	9,320	1	DIN 472	5	92131A670	00000
		36	37.42	1.22	37.7	1.1	8,870	2	—	5	92602A370	0000
		36	38	1.6	38.36	1.44	9,590	1	DIN 472	5	92131A680	00000
		38	39.42	1.22	39.7	1.1	9,360	2	—	5	92602A380	00000
		38	40	1.6	40.44	1.44	10,100	1	DIN 472	5	92131A690	00000
		40	42.5	1.85	42.86	1.69	12,500	1	DIN 472	5	92131A710	00000
		41	42.6	1.42	42.92	1.25	10,400	2	—	5	92602A390	00000
		45	47.5	1.85	47.88	1.69	14,000	1	DIN 472	5	92131A720	00000
		50	51.92	1.42	52.3	1.25	12,700	2	—	5	92602A410	0000
		50	53	2.15	53.5	1.93	16,900	1	DIN 472	5	92131A730	00000


		55	58	2.15	58.55	1.93	18,600	1	DIN 472	1	92131A740	0000
		60	63	2.15	63.6	1.93	20,300	1	DIN 472	1	92131A750	0000
		62	64.24	1.42	64.7	1.25	15,800	2	—	5	92602A420	00000
		65	67.34	1.42	67.82	1.25	16,600	2	—	5	92602A430	00000
		65	68	2.65	68.7	2.41	26,100	1	DIN 472	1	92131A760	0000
		70	73	2.65	73.64	2.41	28,200	1	DIN 472	1	92131A770	0000
		72	74.54	1.42	75.04	1.25	18,400	2	—	5	92602A440	00000
		75	78	2.65	78.75	2.41	30,200	1	DIN 472	1	92131A780	0000
		88	90.84	1.73	91.45	1.55	27,800	2	—	1	92602A450	0000


		18-8 Stainless Steel



				13	13.6	1.1	13.73	0.94	2,380	1	DIN 472	5	92131A110	0000


				14	14.6	1.1	14.74	0.94	2,560	1	DIN 472	5	92131A120	0000
				15	15.7	1.1	15.85	0.94	2,740	1	DIN 472	5	92131A130	0000
				16	16.8	1.1	16.9	0.94	2,920	1	DIN 472	5	92131A140	0000
				17	17.8	1.1	17.97	0.94	3,110	1	DIN 472	5	92131A150	00000
18				19	1.1	19.18	0.94	3,290	1	DIN 472	5	92131A160	00000
19	20			1.1	20.25	0.94	3,470	1	DIN 472	5	92131A170	00000
20	21			1.1	21.2	0.94	3,650	1	DIN 472	5	92131A180	00000
22	23			1.1	23.22	0.94	4,020	1	DIN 472	5	92131A190	00000
24	25.2			1.3	25.4	1.15	5,370	1	DIN 472	5	92131A210	00000
25	26.2			1.3	26.45	1.15	5,600	1	DIN 472	1	92131A220	0000


26	27.2			1.3	27.46	1.15	5,820	1	DIN 472	1	92131A230	0000
26	27.26			1.07	27.5	0.94	5,470	2	—	5	93427A310	00000
28	29.26			1.07	29.5	0.94	5,890	2	—	5	93427A320	00000
28	29.4			1.3	29.68	1.15	6,270	1	DIN 472	1	92131A240	0000
30	31.4			1.3	31.79	1.15	6,720	1	DIN 472	1	92131A250	0000
32	33.7			1.3	33.93	1.15	7,170	1	DIN 472	1	92131A260	0000
34	35.7			1.6	36.04	1.44	9,060	1	DIN 472	1	92131A270	0000
35	37			1.6	37.35	1.44	9,320	1	DIN 472	1	92131A280	0000
36	38			1.6	38.36	1.44	9,590	1	DIN 472	1	92131A290	0000
38	40			1.6	40.44	1.44	10,100	1	DIN 472	1	92131A310	0000


40	42.5			1.85	42.86	1.69	12,500	1	DIN 472	1	92131A320	0000
45	47.5			1.85	47.88	1.69	14,000	1	DIN 472	1	92131A330	0000
50	51.92			1.42	52.3	1.25	12,700	2	—	1	93427A330	0000
50	53			2.15	53.5	1.93	16,900	1	DIN 472	1	92131A340	0000
55	58			2.15	58.55	1.93	18,600	1	DIN 472	1	92131A350	0000
60	63			2.15	63.6	1.93	20,300	1	DIN 472	1	92131A360	00000
65	67.34			1.42	67.82	1.25	16,600	2	—	1	93427A340	0000
65	68			2.65	68.7	2.41	26,100	1	DIN 472	1	92131A370	00000
70	73			2.65	73.64	2.41	28,200	1	DIN 472	1	92131A380	00000
75	78			2.65	78.75	2.41	30,200	1	DIN 472	1	92131A390	00000


80	83.5			2.65	84.3	2.41	32,200	1	DIN 472	1	92131A410	00000
85	88.5			3.15	89.35	2.91	39,300	1	DIN 472	1	92131A420	00000
90	93.5			3.15	94.7	2.91	41,600	1	DIN 472	1	92131A430	00000
95	98.5			3.15	99.62	2.91	43,900	1	DIN 472	1	92131A440	00000
100	103.5			3.15	104.5	2.91	46,300	1	DIN 472	1	92131A450	00000

High-Load Spiral Internal Retaining Rings

Stand up to stronger forces with more layers than the standard internal spiral option. These rings usually have 20% more thrust load capacity than the standard. No tools needed for installation. Spread apart, insert one end into the groove, then collapse the rest of it into place.

Ring OD is measured with the ring uninstalled.

Carbon Steel—The go-to choice. These rings have high strength and wear resistance, but they don't resist rust.

18-8 Stainless Steel—The choice for wet and outdoor environments. These rings resist rust, but they aren't as strong as carbon steel.

		For Groove, mm		Ring, mm
	For ID, mm	Dia.	Wd.	OD	Thk.	Thrust Load Cap., lbf	Specs. Met.	Pkg. Qty.		Pkg.
Carbon Steel



		13	13.6	1.1	13.72	0.99	3,020	DIN 472	10	92248A460	000000


		14	14.6	1.1	14.75	0.99	3,260	DIN 472	10	92248A470	00000
		15	15.7	1.1	15.85	0.99	3,490	DIN 472	10	92248A480	00000
		16	16.8	1.1	16.97	0.99	3,720	DIN 472	10	92248A490	00000
		17	17.8	1.1	17.98	0.99	3,960	DIN 472	10	92248A510	00000
		18	19	1.1	19.18	0.99	4,190	DIN 472	10	92248A520	00000
		19	20	1.1	20.19	0.99	4,420	DIN 472	10	92248A530	00000
		20	21	1.1	21.21	0.99	4,660	DIN 472	5	92248A540	00000
		22	23	1.1	23.23	0.99	5,120	DIN 472	5	92248A550	00000
		24	25.2	1.3	25.45	1.14	5,590	DIN 472	5	92248A560	00000
		25	26.2	1.3	26.45	1.14	5,820	DIN 472	5	92248A570	00000


		26	27.2	1.3	27.48	1.14	6,060	DIN 472	5	92248A580	00000
		28	29.4	1.3	29.69	1.14	6,520	DIN 472	5	92248A590	00000
		30	31.4	1.3	31.71	1.14	6,990	DIN 472	5	92248A610	00000
		32	33.7	1.3	34.04	1.14	7,460	DIN 472	5	92248A620	00000
		34	35.7	1.6	36.07	1.44	10,000	DIN 472	5	92248A630	00000
		35	37	1.6	37.38	1.44	10,300	DIN 472	5	92248A640	00000
		36	38	1.6	38.39	1.44	10,600	DIN 472	5	92248A650	00000
		38	40	1.6	40.41	1.44	11,100	DIN 472	5	92248A660	00000
		40	42.5	1.85	42.93	1.69	13,800	DIN 472	5	92248A670	00000
		45	47.5	1.85	47.98	1.69	15,500	DIN 472	5	92248A680	00000


		50	53	2.15	53.54	1.93	19,700	DIN 472	5	92248A690	00000
		55	58	2.15	58.57	1.93	21,700	DIN 472	1	92248A710	0000
		60	63	2.15	63.63	1.93	23,600	DIN 472	1	92248A720	0000
		65	68	2.65	68.67	2.41	30,500	DIN 472	1	92248A730	0000
		70	73	2.65	73.67	2.41	32,800	DIN 472	1	92248A740	0000
		75	78	2.65	78.68	2.41	35,200	DIN 472	1	92248A750	0000
		80	83.5	2.65	84.19	2.41	37,500	DIN 472	1	92248A760	0000
		85	88.5	3.15	89.2	2.91	48,100	DIN 472	1	92248A770	0000
		90	93.5	3.15	94.21	2.91	51,000	DIN 472	1	92248A780	0000
		95	98.5	3.15	99.24	2.91	53,800	DIN 472	1	92248A790	00000


		100	103.5	3.15	104.29	2.91	56,600	DIN 472	1	92248A810	00000


		18-8 Stainless Steel



				13	13.6	1.1	13.72	0.99	3,020	DIN 472	5	92248A110	00000


				14	14.6	1.1	14.75	0.99	3,260	DIN 472	5	92248A120	00000
				15	15.7	1.1	15.85	0.99	3,490	DIN 472	5	92248A130	00000
				16	16.8	1.1	16.97	0.99	3,720	DIN 472	5	92248A140	00000
				17	17.8	1.1	17.98	0.99	3,960	DIN 472	5	92248A150	00000
				18	19	1.1	19.18	0.99	4,190	DIN 472	5	92248A160	00000
				19	20	1.1	20.19	0.99	4,420	DIN 472	5	92248A170	00000
				20	21	1.1	21.21	0.99	4,660	DIN 472	1	92248A180	0000
				22	23	1.1	23.23	0.99	5,120	DIN 472	1	92248A190	0000
				24	25.2	1.3	25.45	1.14	5,590	DIN 472	1	92248A210	0000
				25	26.2	1.3	26.45	1.14	5,820	DIN 472	1	92248A220	0000


26				27.2	1.3	27.48	1.14	6,060	DIN 472	1	92248A230	0000
28	29.4			1.3	29.69	1.14	6,520	DIN 472	1	92248A240	0000
30	31.4			1.3	31.71	1.14	6,990	DIN 472	1	92248A250	0000
32	33.7			1.3	34.04	1.14	7,460	DIN 472	1	92248A260	0000
34	35.7			1.6	36.07	1.44	10,000	DIN 472	1	92248A270	0000
35	37			1.6	37.38	1.44	10,300	DIN 472	1	92248A280	0000
36	38			1.6	38.39	1.44	10,600	DIN 472	1	92248A290	0000
38	40			1.6	40.41	1.44	11,100	DIN 472	1	92248A310	0000
40	42.5			1.85	42.93	1.69	13,800	DIN 472	1	92248A320	0000
45	47.5			1.85	47.98	1.69	15,500	DIN 472	1	92248A330	0000


50	53			2.15	53.54	1.93	19,700	DIN 472	1	92248A340	0000
55	58			2.15	58.57	1.93	21,700	DIN 472	1	92248A350	00000
60	63			2.15	63.63	1.93	23,600	DIN 472	1	92248A360	00000
65	68			2.65	68.67	2.41	30,500	DIN 472	1	92248A370	00000
70	73			2.65	73.67	2.41	32,800	DIN 472	1	92248A380	00000
75	78			2.65	78.68	2.41	35,200	DIN 472	1	92248A390	00000
80	83.5			2.65	84.19	2.41	37,500	DIN 472	1	92248A410	00000
85	88.5			3.15	89.2	2.91	48,100	DIN 472	1	92248A420	00000
90	93.5			3.15	94.21	2.91	51,000	DIN 472	1	92248A430	00000
95	98.5			3.15	99.24	2.91	53,800	DIN 472	1	92248A440	00000


100	103.5			3.15	104.29	2.91	56,600	DIN 472	1	92248A450	00000

Internal Retaining Rings Assortment

Stock up on our go-to internal retaining rings in a range of sizes. Squeeze with retaining ring pliers and release into a groove inside a bore or housing.

Phosphate-Coated Carbon Steel—The most popular choice, these are strong and wear resistant. Their finish adds some corrosion resistance, but only to minimal dampness.

	Includes	Specs. Met		Each
Phosphate-Coated Carbon Steel



	240	For 8 mm to 32 mm ID	DIN 472	98365A260	0000000

High-Load Internal Retaining Rings

Thick rings manufactured for high-load applications, from power-generation systems to earth movers. Compared to the standard internal retaining rings, these have up to twice the thrust load capacity. Squeeze with retaining ring pliers and release into a groove inside a bore or housing.

Ring OD is measured with the ring uninstalled.

Phosphate-Coated Carbon Steel—The most popular choice, these are strong and wear resistant. Their finish adds some corrosion resistance, but only to minimal dampness.

	Retaining Rings											Pliers
		For Groove, mm		Ring, mm
	For ID, mm	Dia.	Wd.	OD	Thk.	Thrust Load Cap., lbf	Min. Hardness	Specs. Met.	Pkg. Qty.		Pkg.		Each
Phosphate-Coated Carbon Steel



		20	21	1.6	21.5	1.5	3,640	Rockwell C47	DIN 472	25	97250A110	00000	5449A92	000000


		22	23	1.6	23.5	1.5	4,040	Rockwell C47	DIN 472	25	97250A120	0000	5449A92	00000
		28	29.4	1.6	30.1	1.5	4,670	Rockwell C47	DIN 472	25	97250A130	00000	5449A92	00000
		30	31.4	1.6	32.1	1.5	4,810	Rockwell C47	DIN 472	25	97250A140	00000	5449A92	00000
		32	33.7	1.6	34.4	1.5	4,810	Rockwell C47	DIN 472	25	97250A150	0000	5449A92	00000
		35	37	1.85	37.8	1.75	8,220	Rockwell C47	DIN 472	25	97250A160	00000	5449A92	00000
		38	40	1.85	40.8	1.75	8,610	Rockwell C47	DIN 472	10	97250A170	00000	5449A92	00000
		40	42.5	2.15	43.5	2	13,100	Rockwell C47	DIN 472	10	97250A180	00000	5449A92	00000
		45	47.5	2.15	48.5	2	12,700	Rockwell C47	DIN 472	5	97250A190	00000	5449A93	00000
		52	55	2.65	56.2	2.5	21,200	Rockwell C47	DIN 472	5	97250A210	00000	5449A93	00000
		55	58	2.65	59.2	2.5	21,200	Rockwell C47	DIN 472	5	97250A220	00000	5449A93	00000


		60	63	3.15	64.2	3	30,700	Rockwell C47	DIN 472	5	97250A230	00000	5449A93	00000
		62	65	3.15	66.2	3	30,700	Rockwell C47	DIN 472	5	97250A240	00000	5449A93	00000
		63	66	3.15	67.2	3	30,700	Rockwell C47	DIN 472	5	97250A250	00000	5449A93	00000
		64	67	3.15	68.2	3	30,700	Rockwell C47	DIN 472	5	97250A260	00000	5449A93	00000
		65	68	3.15	69.2	3	39,100	Rockwell C47	DIN 472	5	97250A270	00000	5449A93	00000
		70	73	3.15	74.5	3	38,400	Rockwell C47	DIN 472	5	97250A280	00000	5449A93	00000

Tight-Clearance Inverted Internal Retaining Rings

The lugs on these rings point outward, so they won't snag on other parts and have better clearance than standard internal rings. Shaped in the most common style, they are tapered so the thickest section is opposite their opening for a secure 360-degree hold. Squeeze with retaining ring pliers and release into a groove inside a bore or housing.

Ring OD is measured with the ring uninstalled.

Phosphate-Coated Carbon Steel—The most popular choice, these are strong and wear resistant. Their finish adds some corrosion resistance, but only to minimal dampness.

	Retaining Rings											Pliers
		For Groove, mm		Ring, mm
	For ID, mm	Dia.	Wd.	OD	Thk.	Thrust Load Cap., lbf	Min. Hardness	Specs. Met.	Pkg. Qty.		Pkg.		Each
Phosphate-Coated Carbon Steel



		12	12.6	0.7	13.1	0.6	400	Rockwell C47	DIN 472	50	90442A201	000000	5449A91	000000


		13	13.6	0.7	14.5	0.6	400	Rockwell C47	DIN 472	50	90442A202	00000	5449A91	00000
		15	15.7	0.9	16.1	0.8	740	Rockwell C47	DIN 472	50	90442A203	00000	5449A91	00000
		16	16.8	1.1	17.3	1	1,160	Rockwell C47	DIN 472	50	90442A204	00000	5449A91	00000
		17	17.8	1.1	18.3	1	1,300	Rockwell C47	DIN 472	50	90442A205	00000	5449A91	00000
		18	19	1.1	19.5	1	1,410	Rockwell C47	DIN 472	25	90442A206	0000	5449A91	00000
		19	20	1.1	20.5	1	1,480	Rockwell C47	DIN 472	25	90442A207	0000	5449A91	00000
		20	21	1.1	21.5	1	1,570	Rockwell C47	DIN 472	25	90442A208	0000	5449A91	00000
		21	22	1.1	22.5	1	1,660	Rockwell C47	DIN 472	25	90442A209	0000	5449A91	00000
		22	23	1.1	23.5	1	1,680	Rockwell C47	DIN 472	25	90442A210	0000	5449A91	00000
		24	25.2	1.3	25.9	1.2	3,250	Rockwell C47	DIN 472	25	90442A211	0000	5449A91	00000


		25	26.2	1.3	26.9	1.2	3,320	Rockwell C47	DIN 472	25	90442A212	0000	5449A91	00000
		26	27.2	1.3	27.9	1.2	3,430	Rockwell C47	DIN 472	25	90442A213	00000	5449A92	00000
		27	28.4	1.3	29.1	1.2	3,370	Rockwell C47	DIN 472	25	90442A214	00000	5449A92	00000
		28	29.4	1.3	30.1	1.2	3,430	Rockwell C47	DIN 472	25	90442A215	00000	5449A92	00000
		30	31.4	1.3	32.1	1.2	3,340	Rockwell C47	DIN 472	25	90442A216	00000	5449A92	00000
		32	33.7	1.3	34.4	1.2	3,160	Rockwell C47	DIN 472	10	90442A217	0000	5449A92	00000
		33	34.7	1.3	35.5	1.2	3,100	Rockwell C47	DIN 472	10	90442A218	0000	5449A92	00000
		34	35.7	1.6	36.5	1.5	5,390	Rockwell C47	DIN 472	10	90442A219	0000	5449A92	00000
		35	37	1.6	37.8	1.5	5,930	Rockwell C47	DIN 472	10	90442A220	0000	5449A92	00000
		36	38	1.6	38.8	1.5	6,180	Rockwell C47	DIN 472	10	90442A221	0000	5449A92	00000


		38	40	1.6	40.8	1.5	6,290	Rockwell C47	DIN 472	10	90442A222	0000	5449A92	00000
		40	42.5	1.85	43.5	1.75	10,220	Rockwell C47	DIN 472	10	90442A223	00000	5449A92	00000
		42	44.5	1.85	45.5	1.75	10,220	Rockwell C47	DIN 472	10	90442A224	00000	5449A92	00000
		45	47.5	1.85	48.5	1.75	9,890	Rockwell C47	DIN 472	10	90442A225	00000	5449A92	00000
		48	50.5	1.85	51.5	1.75	10,790	Rockwell C47	DIN 472	10	90442A226	00000	5449A92	00000
		50	53	2.15	54.2	2	15,510	Rockwell C44	DIN 472	1	90442A227	0000	5449A92	00000
		52	55	2.15	56.2	2	14,940	Rockwell C44	DIN 472	10	90442A228	00000	5449A92	00000
		58	61	2.15	62.2	2	14,380	Rockwell C44	DIN 472	1	90442A229	0000	5449A92	00000

Tight-Hold Internal-Tooth Internal Retaining Rings

Internal teeth prevent your ring from tilting, bending, and falling off. When there's side clearance from a chamfered end, for instance, a standard ring may tilt over time and lose its hold. Commonly used to retain shafts in roller drum systems and other heavy duty equipment.

Ring OD is measured with the ring uninstalled.

Phosphate-Coated Carbon Steel—The most popular choice, these are strong and wear resistant. Their finish adds some corrosion resistance, but only to minimal dampness.

	Retaining Rings											Pliers
		For Groove, mm		Ring, mm
	For ID, mm	Dia.	Wd.	OD	Thk.	Thrust Load Cap., lbf	Min. Hardness	Specs. Met.	Pkg. Qty.		Pkg.		Each
Phosphate-Coated Carbon Steel



		16	16.8	1.1	17.3	1	1,230	Rockwell C47	DIN 984	25	97244A111	00000	5449A91	000000


		18	19	1.1	19.5	1	1,460	Rockwell C47	DIN 984	25	97244A112	0000	5449A91	00000
		24	25.2	1.3	25.9	1.2	3,120	Rockwell C47	DIN 984	25	97244A113	0000	5449A91	00000
		26	27.2	1.3	28.5	1.2	3,100	Rockwell C47	DIN 984	25	97244A114	0000	5449A92	00000
		28	29.4	1.3	30.1	1.2	2,980	Rockwell C47	DIN 984	25	97244A115	0000	5449A92	00000
		30	31.4	1.3	32.1	1.2	3,070	Rockwell C47	DIN 984	25	97244A116	00000	5449A92	00000
		32	33.7	1.3	34.4	1.2	3,100	Rockwell C47	DIN 984	25	97244A117	00000	5449A92	00000
		35	37	1.6	37.8	1.5	6,040	Rockwell C47	DIN 984	25	97244A118	00000	5449A92	00000
		36	38	1.6	38.8	1.5	5,930	Rockwell C47	DIN 984	10	97244A119	0000	5449A92	00000
		40	42.5	1.85	43.5	1.75	10,020	Rockwell C47	DIN 984	10	97244A121	00000	5449A92	00000
		44	46.5	1.85	47.5	1.75	9,730	Rockwell C47	DIN 984	10	97244A122	00000	5449A92	00000


		45	47.5	1.85	48.5	1.75	9,680	Rockwell C47	DIN 984	10	97244A123	00000	5449A92	00000
		50	53	2.15	54.2	2	13,660	Rockwell C44	DIN 984	1	97244A124	0000	5449A92	00000
		52	55	2.15	56.2	2	13,530	Rockwell C44	DIN 984	10	97244A125	00000	5449A92	00000
		54	57	2.15	58.2	2	13,530	Rockwell C44	DIN 984	10	97244A126	00000	5449A92	00000
		55	58	2.15	59.2	2	13,550	Rockwell C44	DIN 984	10	97244A127	00000	5449A92	00000
		57	60	2.15	61.2	2	13,660	Rockwell C44	DIN 984	5	97244A128	0000	5449A92	00000
		62	65	2.15	66.2	2	13,690	Rockwell C44	DIN 984	5	97244A129	0000	5449A93	00000
		65	68	2.65	69.2	2.5	27,200	Rockwell C44	DIN 984	5	97244A131	00000	5449A93	00000
		72	75	2.65	76.5	2.5	26,750	Rockwell C44	DIN 984	1	97244A132	0000	5449A93	00000
		80	83.5	2.65	85.5	2.5	26,970	Rockwell C44	DIN 984	5	97244A133	00000	5449A93	00000


		90	93.5	3.15	95.5	3	44,730	Rockwell C44	DIN 984	1	97244A134	00000	5449A93	00000

Push-On Internal Retaining Rings

No groove needed—these internal rings have teeth to grip your bore or housing on their own. They won't handle as much force as rings in grooves, however, so use them in applications with lighter loads. Good for one-time use on unhardened shafts softer than the ring.

Phosphate-Coated Carbon Steel—The most popular choice, these are strong and wear resistant. Their finish adds some corrosion resistance, but only to minimal dampness.

	Ring, mm
For ID, mm	ID	Thk.	Min. Hardness	Min. Installation Dp., mm	Pkg. Qty.		Pkg.







			Phosphate-Coated Carbon Steel

			8	4	0.25	Rockwell C45	2	100	90635A428	00000


			10	5	0.25	Rockwell C45	2	50	90635A124	00000
			12	6	0.25	Rockwell C45	2.5	100	90635A429	0000
			14	8	0.3	Rockwell C45	2.5	100	90635A480	00000
			15	9	0.3	Rockwell C45	2.5	50	90635A214	00000
			16	10	0.3	Rockwell C45	2.5	100	90635A610	00000
			17	11	0.3	Rockwell C45	3	50	90635A236	00000
			18	10.5	0.4	Rockwell C45	3	50	90635A628	0000
			20	11	0.4	Rockwell C45	3.5	50	90635A805	00000
			22	13	0.5	Rockwell C45	3.5	50	90635A857	00000
			24	15	0.5	Rockwell C45	3.5	50	90635A976	00000


			25	16	0.5	Rockwell C45	3.5	25	90635A293	0000
			26	17	0.5	Rockwell C45	3.5	25	90635A294	00000
			30	21	0.5	Rockwell C45	4	25	90635A352	00000
			35	25	0.5	Rockwell C45	4	10	90635A360	0000
			40	30	0.5	Rockwell C45	4	10	90635A415	0000
			50	39	0.5	Rockwell C45	4	10	90635A422	0000