Metric Lock Washers | McMaster-Carr

	REACH (Registration, Evaluation, Authorization and Restriction of Chemicals) REACH (Registration, Evaluation, Authorization and Restriction of Chemicals)

REACH Compliant

	Overall Height Overall Height

	Spring Lock Washer Shape Spring Lock Washer Shape


Conical	Curved

	Serration Location Serration Location

Top and Bottom

	Tab Width Tab Width

	For Bearing Nut Face Style For Bearing Nut Face Style

Chamfered

Stepped

	Tab Depth Tab Depth

	For Shaft Diameter For Shaft Diameter

	For Bearing Nut Specifications Met For Bearing Nut Specifications Met

1,113 Products

About Washers

Metric Split Lock Washers

Metric Split Lock Washers for Socket Head Screws

Metric Internal-Tooth Lock Washers

Internal teeth dig into the screw head while the smooth outside edge won't snag objects. Use with metric fasteners that have small heads, such as fillister and cheese head screws.

Metric External-Tooth Lock Washers

Teeth on the outside edge of these metric washers bite into the screw head and joint for a tight grip.

Tight-Grip External-Tooth Lock Washers

The teeth on these washers bite further into the screw head and joint than standard external-tooth washers to provide a stronger hold.

Countersunk Tight-Grip External-Tooth Lock Washers

To keep 90° countersunk screws from loosening in vibration applications, the teeth on these washers bite further into the screw head and joint than standard external-tooth lock washers for a more secure hold.

Internal-/External-Tooth Lock Washers

The combination of internal and external teeth boosts gripping power to maintain a tight hold and provide more vibration resistance than other tooth lock washers. Use with fasteners that have heads large enough to make contact with the external teeth, such as pan, button, and binding head screws.

Belleville Spring Lock Washers for Socket Head Screws

These washers have smaller outside diameters than standard spring lock washers to fit neatly under socket head cap screws.

Spring Lock Washers for Slotted Bearing Nuts

Designed for use with bearing nuts, these lock washers have a conical shape that presses like a spring against bearings, bushings, gears, and pulleys to hold them in place on your threaded shaft or spindle.

Belleville Spring Lock Washers

Also known as conical washers, these have a slightly cupped shape that gives them spring-like flexibility to grip tighter than split and tooth lock washers.

Metric Spring Lock Washers

The arched shape of these washers presses up against a bolt and down against a nut to prevent loosening from wear, vibration, or temperature changes.

Spring Lock Washers for Plastic Screws

Designed for use with plastic screws, these acetal washers are good electrical insulators. They are excellent for use under water and in rotating assemblies.

Wedge Lock Washers

Comparable to NORD-LOCK® and Sherex TEC Series washers, these two-piece washers provide more locking power than split, tooth, and spring lock washers. Wedges on the inside lock the two pieces together, and serrations on the exterior grip surfaces to resist loosening from high vibration and shifting.

Metric Tab Lock Washers

Bend the tab of these metric lock washers against the flats of a hex nut or bolt head to prevent the fastener and washer from turning and loosening due to vibration, wear, or changes in temperature.

Split Lock Washer Assortments

As a screw is tightened, these washers flatten to add tension to the joint and prevent loosening from small amounts of vibration.

Disc Springs

Stacked Wave Disc Springs

Multiple rows of waves allow these springs to handle higher loads than standard wave disc springs.

Corrosion-Resistant Stacked Wave Disc Springs

Made of 17-7 PH stainless steel with multiple rows of waves, these springs are more corrosion resistant than steel springs and handle greater loads than standard wave disc springs.

Split Wave Disc Springs

A gap allows these springs to compress without widening, so they won't bind or deform when used inside a housing with tight clearance.

Belleville Disc Springs

Use these steel springs in noncorrosive environments.

Corrosion-Resistant Belleville Disc Springs

Made of stainless steel, these springs are more corrosion resistant than steel springs. Use them on shafts, bolts, and the ends of valves to maintain tension and separate components.

Belleville Disc Springs for Ball Bearings

Install these springs, also known as bearing preload washers, against ball bearings to reduce noise and unwanted movement along the shaft.