Filter by
Drive Size
Drive Style
Sold As
Grip Style
Overall Length
Bolt Clearance
Material
Shank Type
Length
Performance
Container Type
DFARS Specialty Metals
Export Control Classification Number (ECCN)
Surface Resistivity
Static Control Rating
Specifications Met
Nutdrivers
 |
Plain Grip |
 |
Cushion Grip |
 |
Tighten and loosen hex nuts for routine maintenance and repairs. With a hollow shaft, these nutdrivers reach nuts at the end of long bolts.
Chrome-Plated Steel—The bright plating resists salt water and chemicals better than other finishes and is less likely to wear off.
Black-Oxide Steel—These nutdrivers withstand occasional moisture.
Steel—Best for dry environments, since moisture will cause it to rust.
Plain Grip—Made of hard plastic for durability.
Cushion Grip—Made of soft plastic to make gripping and squeezing the handle more comfortable.
Shaft | |||||||||
|---|---|---|---|---|---|---|---|---|---|
Drive Size, mm | Bolt Clearance | Overall Lg. | Lg. | Overall Wd. | Material | Grip Style | Each | ||
| 4 | 1" | 7 5/16" | 3" | 3/16" | Chrome-Plated Steel | Plain | 0000000 | 00000 | |
| 4.5 | 3" | 6 5/8" | 3" | 5/16" | Black-Oxide Steel | Plain | 0000000 | 0000 | |
| 5 | 3" | 6 5/8" | 3" | 3/8" | Chrome-Plated Steel | Plain | 0000000 | 0000 | |
| 5.5 | 1" | 7 5/16" | 3" | 3/16" | Chrome-Plated Steel | Plain | 0000000 | 0000 | |
| 6 | 3" | 7 5/16" | 3" | 1/4" | Chrome-Plated Steel | Plain | 0000000 | 0000 | |
| 7 | 1" | 7 5/16" | 3" | 1/4" | Chrome-Plated Steel | Plain | 0000000 | 0000 | |
| 8 | 1" | 7 3/8" | 3" | 3/8" | Chrome-Plated Steel | Cushion | 0000000 | 0000 | |
| 9 | 1" | 7 5/16" | 3" | 3/8" | Chrome-Plated Steel | Plain | 0000000 | 0000 | |
| 10 | 1" | 7 5/16" | 3" | 3/8" | Chrome-Plated Steel | Plain | 0000000 | 0000 | |
| 11 | 1" | 7 5/16" | 3" | 7/16" | Chrome-Plated Steel | Plain | 0000000 | 0000 | |
| 12 | 3" | 7 1/4" | 3" | 15/32" | Chrome-Plated Steel | Plain | 0000000 | 0000 | |
| 13 | 7" | 7 1/4" | 3 1/8" | 13/16" | Steel | Plain | 0000000 | 00000 | |
Precise-Control Nutdriver Sets
 | |
Keep a selection of small nutdrivers on hand to adjust electronics and other delicate components. These give you better control than standard nutdrivers to avoid stripping tiny nuts or cracking fragile materials. Press the end of the handle with your palm to apply constant pressure while turning the handle with your fingertips.
Chrome-Plated Steel—The bright plating resists salt water and chemicals better than other finishes and is less likely to wear off.
Plain Grip—Made of hard plastic for durability.
No. of Pieces | Includes | Bolt Clearance | Material | Grip Style | Each | ||
|---|---|---|---|---|---|---|---|
| 8 | 2.5 mm Nutdriver—6 1/8" O'all Lg. 3 mm Nutdriver—6 1/8" O'all Lg. 3.5 mm Nutdriver—6 1/8" O'all Lg. 4 mm Nutdriver—6 1/8" O'all Lg. 4.5 mm Nutdriver—6 1/8" O'all Lg. 5 mm Nutdriver—6 1/8" O'all Lg. 5.5 mm Nutdriver—6 3/4" O'all Lg. 6 mm Nutdriver—6 3/4" O'all Lg. | 3/8" to 11/16" | Chrome-Plated Steel | Plain | 00000000 | 000000 |
Fastener-Holding Nutdriver Bits
 |
Hex Shank |
 |
Quick-Change Hex Shank |
 |
 |
External Hex |
Overall | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Drive Size, mm | Bolt Clearance | Lg. | Dia. | Fastener-Holding Mechanism | Material | Each | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
1/4" Hex Shank | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 7 | 1/8" | 1 1/8" | 0.438" | Magnet | Steel | 00000000 | 00000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 8 | 1/8" | 1 1/8" | 0.5" | Magnet | Steel | 00000000 | 0000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 10 | 1/8" | 1 1/8" | 0.563" | Magnet | Steel | 00000000 | 0000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
1/4" Quick-Change Hex Shank | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 4 | 1/16" | 2 5/8" | 0.438" | Magnet | Steel | 0000000 | 0000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 5 | 1/16" | 1 5/8" | 0.438" | Magnet | Steel | 0000000 | 0000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 5 | 1/16" | 2 5/8" | 0.438" | Magnet | Steel | 0000000 | 0000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 5.5 | 1/16" | 1 5/8" | 0.438" | Magnet | Steel | 0000000 | 0000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 5.5 | 1/16" | 2 5/8" | 0.438" | Magnet | Steel | 0000000 | 0000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 6 | 1/8" | 1 5/8" | 0.438" | Magnet | Steel | 0000000 | 0000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 6 | 1/8" | 2 5/8" | 0.438" | Magnet | Steel | 0000000 | 0000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 7 | 1/8" | 2 5/8" | 0.438" | Magnet | Steel | 0000000 | 0000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 8 | 1/8" | 1 5/8" | 0.5" | Magnet | Steel | 0000000 | 0000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 9 | 1/8" | 2 5/8" | 0.563" | Magnet | Steel | 0000000 | 0000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 10 | 1/8" | 1 3/4" | 0.563" | Magnet | Steel | 0000000 | 0000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 10 | 1/8" | 2 5/8" | 0.563" | Magnet | Steel | 0000000 | 0000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 12 | 3/16" | 2 5/8" | 0.75" | Magnet | Steel | 0000000 | 00000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 13 | 3/16" | 2 5/8" | 0.75" | Magnet | Steel | 0000000 | 00000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Static-Control Precise-Control Nutdriver Sets
 | |
Keep a collection of small nutdrivers on hand to protect delicate electronics from static shocks. Also known as ESD-safe nutdrivers, these drain static away from your workpiece before it causes damage. Press the end of the handle with your palm to apply pressure while turning the nutdriver with your fingertips.
Warning: Because the handle conducts electricity, nutdrivers must not come in contact with sources of electrical power.
Black-Oxide Steel—These nutdrivers withstand occasional moisture.
Plain Grip—Made of hard plastic for durability.
No. of Pieces | Includes | Bolt Clearance | Material | Grip Style | Static Control Rating | Surface Resistivity, ohm/sq. | Container Type | Each | ||
|---|---|---|---|---|---|---|---|---|---|---|
| 8 | 2 mm Nutdriver—6 1/4" O'all Lg. 2.2 mm Nutdriver—6 1/4" O'all Lg. 2.5 mm Nutdriver—6 1/4" O'all Lg. 3 mm Nutdriver—6 1/4" O'all Lg. 3.5 mm Nutdriver—6 1/4" O'all Lg. 4 mm Nutdriver—6 1/4" O'all Lg. 4.5 mm Nutdriver—6 1/4" O'all Lg. 5 mm Nutdriver—6 1/4" O'all Lg. | 1/4" to 1/2" | Black-Oxide Steel | Plain | Antistatic | 1× 10^9 to 1× 10^11 | Plastic Pouch | 00000000 | 000000 |
Precise-Control Nutdrivers
 |
Plain Grip |
 |
Ultra Grip |
|
Make fine-tuned adjustments to electronics and other components. These give you better control than standard nutdrivers to avoid stripping tiny nuts or cracking fragile materials. Press the end of the handle with your palm to apply constant pressure while turning the handle with your fingertips.
Chrome-Plated Steel—The bright plating resists salt water and chemicals better than other finishes and is less likely to wear off.
Nickel-Plated Steel—Similar corrosion resistance to chrome plating to withstand salt water and chemicals. However, nickel is more likely to wear off over time.
Plain Grip—Made of hard plastic for durability.
Ultra Grip—Contoured and coated with soft plastic for a secure grip and maximum comfort.
Shaft | |||||||||
|---|---|---|---|---|---|---|---|---|---|
Drive Size, mm | Bolt Clearance | Overall Lg. | Lg. | Overall Wd. | Material | Grip Style | Each | ||
| 1.5 | 1/8" | 5 1/2" | 2 7/16" | 1/8" | Chrome-Plated Steel | Plain | 00000000 | 00000 | |
| 1.8 | 1/8" | 5 1/2" | 2 7/16" | 1/8" | Chrome-Plated Steel | Plain | 00000000 | 0000 | |
| 2 | 3/16" | 5 1/2" | 2 7/16" | 5/32" | Chrome-Plated Steel | Plain | 00000000 | 0000 | |
| 2.5 | 3/8" | 6 1/8" | 2 7/16" | 5/32" | Chrome-Plated Steel | Plain | 00000000 | 0000 | |
| 3 | 5/8" | 6 1/8" | 2 7/16" | 3/16" | Chrome-Plated Steel | Plain | 00000000 | 0000 | |
| 3.2 | 9/16" | 6 3/16" | 2 3/8" | 1/4" | Nickel-Plated Steel | Ultra Grip | 00000000 | 0000 | |
| 3.5 | 5/8" | 6 1/8" | 2 7/16" | 1/4" | Chrome-Plated Steel | Plain | 00000000 | 0000 | |
| 4 | 5/8" | 6 1/8" | 2 7/16" | 1/4" | Chrome-Plated Steel | Plain | 00000000 | 0000 | |
| 4.5 | 5/8" | 6 1/8" | 2 7/16" | 9/32" | Chrome-Plated Steel | Plain | 00000000 | 0000 | |
| 5 | 11/16" | 6 1/8" | 2 7/16" | 9/32" | Chrome-Plated Steel | Plain | 00000000 | 0000 | |
| 5.5 | 11/16" | 6 3/4" | 2 7/16" | 5/16" | Chrome-Plated Steel | Plain | 00000000 | 0000 | |
| 6 | 11/16" | 6 3/4" | 2 7/16" | 3/8" | Chrome-Plated Steel | Plain | 00000000 | 0000 | |
Static-Control Precise-Control Screwdriver Sets
 |
Protect delicate microelectronics from harmful static shocks. Also known as ESD-safe screwdrivers, these meet IEC requirements to drain static away from your workpiece before it causes damage. Precise-control screwdrivers allow for nimble, fine-tuned adjustments. Press the end of the handle with your palm to apply constant pressure while turning the body of the screwdriver with your fingertips.
Warning: These screwdrivers conduct electricity. Do not use them near active power sources.
Chrome-Plated Steel—The bright, shiny plating resists salt water and chemicals better than other finishes and is less likely to wear off.
Plain Grip—Made of hard plastic for durability.
No. of Pieces | Includes | Material | Grip Style | Container Type | Static Control Rating | Surface Resistivity | Specs. Met | Each | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Hex, Phillips, Slotted, Torx | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 50 | 5 3/4" Lg. Chip Lifter Hex Screwdrivers: 0.7 mm, 0.9 mm, 1.3 mm, 1.5 mm, 2 mm, 2.5 mm, 3 mm Hex Screwdrivers: 1/16", 3/32", 7/64", 1/8" Nutdrivers: 1.5 mm, 2 mm, 2.5 mm, 3 mm, 3.5 mm, 4 mm, 4.5 mm, 5 mm, 5.5 mm, 1/8", 5/32", 3/16", 1/4" Phillips Screwdrivers: No. 000, No. 00, No. 0, No. 1 Slotted Screwdrivers: 0.031", 0.039", 0.047", 0.059", 0.079", 0.098", 0.118", 0.138", 0.157" Torx Screwdrivers: T1, T2, T3, T4, T5, T6, T7, T8, T9, T10, T15, T20 | Chrome-Plated Steel | Plain | Metal Stand | Static Dissipative | 1× 10^6Ω⋅cm to 1× 10^9Ω⋅cm | IEC 61340-5-1 | 0000000 | 0000000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Nutdriver Bits
 |
Quick-Change Hex Shank |
|
|
External Hex |
Precise-Control Screwdriver Sets
 |
Plain Grip |
Make fine-tuned adjustments on a variety of small, delicate components, such as electronics, miniature models, and microscopes. These screwdriver sets give you better control than a standard screwdriver to avoid stripping tiny screws or cracking fragile materials. Press the end of the handle with your palm to apply constant pressure while turning the body of the screwdriver with your fingertips. They are also known as precision and miniature screwdrivers.
Chrome-Plated Steel—The bright, shiny plating resists salt water and chemicals better than other finishes and is less likely to wear off.
Plain Grip—Made of hard plastic for durability.
No. of Pieces | Includes | Material | Grip Style | Container Type | Each | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Hex, Phillips, Slotted, Torx | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 50 | 5 3/4" Lg. Chip Lifter Hex Screwdrivers: 0.028", 0.035", 0.050", 1/16", 5/64", 3/32", 7/64", 1/8", 9/64", 5/32" Hex Screwdrivers: 1.27 mm, 1.5 mm, 2 mm, 2.5 mm, 3 mm Nutdrivers: 1.5 mm, 1.8 mm, 2 mm, 2.5 mm, 3 mm, 3.5 mm, 4 mm, 4.5 mm, 5 mm, 5.5 mm Phillips Screwdrivers: No. 000, No. 00, No. 0, No. 1 Slotted Screwdrivers: 1/32", 0.039", 3/64", 1/16", 0.070", 5/64", 3/32", 1/8", 9/64", 5/32" Torx Screwdrivers: T1, T2, T3, T4, T5, T6, T7, T8, T9, T10 | Chrome-Plated Steel | Plain | Metal Stand | 00000000 | 0000000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Tight-Clearance Flexible Nutdriver Sets
 | |
Keep a range of flexible nutdrivers on hand so you always have the size you need. The braided steel shaft bends around obstacles to adjust a nut. Slide these nutdrivers into tight or cluttered spots in compact machinery or HVAC units.
Ultra Grip—Contoured and coated with soft plastic for a secure grip and maximum comfort.
No. of Pieces | Includes | Bolt Clearance | Construction | Material | Grip Style | Each | ||
|---|---|---|---|---|---|---|---|---|
| 7 | 5 mm Nutdriver—10" O'all Lg. 5.5 mm Nutdriver—10" O'all Lg. 6 mm Nutdriver—10" O'all Lg. 7 mm Nutdriver—10 1/2" O'all Lg. 8 mm Nutdriver—10 1/2" O'all Lg. 10 mm Nutdriver—11 1/2" O'all Lg. 13 mm Nutdriver—11 1/2" O'all Lg. | 1/4" to 9/16" | Braided | Plastic-Coated Steel | Ultra Grip | 00000000 | 0000000 |
Nonsparking Nutdrivers
 |
|
Made of FM-approved aluminum bronze, these nutdrivers won't spark when scraped, struck, or dropped. They help you meet OSHA requirements in hazardous environments with flammable vapor, liquid, or dust. Use them everywhere from oil refineries to chemical plants.
Warning: Do not use these nutdrivers in direct contact with acetylene.
Plain Grip—Made of hard plastic for durability.
Electrically Insulating Nutdrivers
 | |
Prevent a dangerous zap if you accidentally touch a live circuit. With an insulated handle and shaft, these nutdrivers absorb up to 1,000 volts of electric shock to meet IEC and ASTM standards. Use them to work safely on circuit boards, control panels, and machines with a lingering charge.
Cushion Grip—Made of soft plastic to make gripping and squeezing the handle more comfortable.
Shaft | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
Drive Size, mm | Bolt Clearance | Overall Lg. | Lg. | Overall Wd. | Material | Grip Style | Specs. Met | Each | ||
| 5 | 5 7/8" | 9" | 5" | 3/8" | Plastic-Coated Steel | Cushion | IEC 60900, ASTM F1505 | 00000000 | 000000 | |
| 6 | 5 7/8" | 8 3/4" | 4 3/8" | 1/2" | Plastic-Coated Steel | Cushion | IEC 60900, ASTM F1505 | 00000000 | 00000 | |
| 7 | 5 7/8" | 8 3/4" | 4 7/16" | 1/2" | Plastic-Coated Steel | Cushion | IEC 60900, ASTM F1505 | 00000000 | 00000 | |
| 8 | 5 7/8" | 8 3/4" | 4 3/8" | 1/2" | Plastic-Coated Steel | Cushion | IEC 60900, ASTM F1505 | 00000000 | 00000 | |
| 10 | 5 7/8" | 9" | 4 9/16" | 1/2" | Plastic-Coated Steel | Cushion | IEC 60900, ASTM F1505 | 00000000 | 00000 | |
| 13 | 5 7/8" | 10 7/16" | 6 1/16" | 1/2" | Plastic-Coated Steel | Cushion | IEC 60900, ASTM F1505 | 00000000 | 00000 | |
Static-Control Precise-Control Nutdrivers
 | |
Protect delicate electronics from harmful static shocks. Also known as ESD-safe nutdrivers, these drain static away from your workpiece before it causes damage. Press the end of the handle with your palm to apply pressure while turning the nutdriver with your fingertips.
Warning: Because the handle conducts electricity, nutdrivers must not come in contact with sources of electrical power.
Black-Oxide Steel—These nutdrivers withstand occasional moisture.
Plain Grip—Made of hard plastic for durability.
Shaft | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
Drive Size, mm | Bolt Clearance | Overall Lg. | Lg. | Overall Wd. | Material | Grip Style | Static Control Rating | Surface Resistivity, ohm/sq. | Each | ||
| 2 | 1/4" | 6 1/4" | 2 1/2" | 5/32" | Black-Oxide Steel | Plain | Antistatic | 1× 10^9 to 1× 10^11 | 00000000 | 000000 | |
| 2.2 | 1/4" | 6 1/4" | 2 1/2" | 5/32" | Black-Oxide Steel | Plain | Antistatic | 1× 10^9 to 1× 10^11 | 00000000 | 00000 | |
| 2.5 | 1/4" | 6 1/4" | 2 1/2" | 5/32" | Black-Oxide Steel | Plain | Antistatic | 1× 10^9 to 1× 10^11 | 00000000 | 00000 | |
| 3 | 1/2" | 6 1/4" | 2 1/2" | 3/16" | Black-Oxide Steel | Plain | Antistatic | 1× 10^9 to 1× 10^11 | 00000000 | 00000 | |
| 4 | 1/2" | 6 1/4" | 2 1/2" | 1/4" | Black-Oxide Steel | Plain | Antistatic | 1× 10^9 to 1× 10^11 | 00000000 | 00000 | |
| 4.5 | 1/2" | 6 1/4" | 2 1/2" | 9/32" | Black-Oxide Steel | Plain | Antistatic | 1× 10^9 to 1× 10^11 | 00000000 | 00000 | |
| 5 | 1/2" | 6 1/4" | 2 1/2" | 5/16" | Black-Oxide Steel | Plain | Antistatic | 1× 10^9 to 1× 10^11 | 00000000 | 00000 | |
| 5.5 | 1/2" | 6 1/4" | 2 1/2" | 5/16" | Black-Oxide Steel | Plain | Antistatic | 1× 10^9 to 1× 10^11 | 00000000 | 00000 | |
| 6 | 1/2" | 6 1/4" | 2 1/2" | 3/8" | Black-Oxide Steel | Plain | Antistatic | 1× 10^9 to 1× 10^11 | 00000000 | 00000 | |
