McMaster-Carr logo
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Comments
    E-mail address (if you would like a response)
    39 Products

    Combination Wrench Sets

    Image of Product. Front orientation. Combination Wrenches. Combination Wrench Sets, Fabric Pouch.
    Image of Product. Front orientation. Combination Wrenches. Combination Wrench Sets, Fabric Roll-Up Pouch.

    Fabric Pouch

    Fabric Roll-Up Pouch

    Image of Product. Front orientation. Combination Wrenches. Combination Wrench Sets, Plastic Organizer.

    Plastic

    Organizer

    Image of Attribute. Front orientation. Contains Annotated. Combination Wrench Sets.
    Image of Attribute. Front orientation. Contains Annotated. Combination Wrench Sets.
    Image of Specification. 12-Point Opening. Front orientation. ZoomedIn view. Contains Border. 12-Point Opening. Combination Wrench Sets.
    Image of Specification. 6-Point Opening. Front orientation. ZoomedIn view. Contains Border. 6-Point Opening. Combination Wrench Sets.

    12-Point

    Opening

    6-Point

    Opening

    With a range of drive sizes and lengths, these wrench sets are your go-to for routine maintenance. With two different ends, you need fewer tools to tighten and loosen nuts and bolts. The open end slides onto the side of fasteners for adjustments in tight spots. When nuts and bolts won't budge, the box end fully encircles them to apply maximum torque.
    6-Point Opening—Avoid rounding off the corners of hex fasteners. These wrenches won't slip, even when nuts and bolts are rusted or damaged, since they grip the sides rather than the corners.
    12-Point Opening—The most common opening, these wrenches work on hex and 12-point nuts and bolts. They slide onto hex heads at more angles than 6-point fasteners for quicker engagement, but they're more likely to slip when you apply more torque.
    Industrial—Made in the U.S. from high-strength steel or stainless steel, these wrenches are built to last. They’re indispensable for daily maintenance and repair.
    Value—Fill out your tool kit for a few dollars per wrench. Typically imported, these cost-friendly sets are the right choice for occasional maintenance.
    Dull—With a textured finish, these wrenches won't slip out of your hands, even when greasy or oily.
    Polished—The smooth surface is easy to wipe clean of grime. The mirror-like finish lends a high-end look to any toolkit.
    Chrome-Plated Steel—The most popular finish, these wrenches won't rust or chip. Although they withstand moisture better than black oxide, they don't hold up to harsh chemicals as well as stainless steel.
    Corrosion-Resistant Wear-Resistant 420 Stainless Steel—The most corrosion-resistant wrenches we offer. Stronger than other types of stainless steel, they'll withstand years of use without breaking or warping.
    No. of
    Pieces
    Drive Size
    Overall Lg.
    Box-End Head
    Offset Angle
    Open-End Opening
    Angle
    Appearance
    Material
    Container Type
    Specs. Met
    Each
    Industrial
     
    6-Point Opening
    117 mm, 8 mm, 9 mm, 10 mm, 11 mm, 12 mm, 13 mm, 14 mm, 15 mm, 17 mm, 19 mm5 3/16" to 11 1/16"15°15°PolishedChrome-Plated SteelFabric Roll-Up Pouch00000000000000
     
    12-Point Opening
    116 mm, 8 mm, 10 mm, 11 mm, 12 mm, 13 mm, 14 mm, 15 mm, 16 mm, 17 mm, 19 mm3 3/4" to 9 3/16"15°15°420 Stainless SteelDIN 3113000000000000000
    117 mm, 8 mm, 9 mm, 10 mm, 11 mm, 12 mm, 13 mm, 14 mm, 15 mm, 17 mm, 19 mm5 1/4" to 10 1/8"15°15°DullChrome-Plated SteelFabric Roll-Up Pouch0000000000000
    117 mm, 8 mm, 9 mm, 10 mm, 11 mm, 12 mm, 13 mm, 14 mm, 15 mm, 17 mm, 19 mm5 1/4" to 10 1/8"15°15°PolishedChrome-Plated SteelFabric Roll-Up Pouch0000000000000
    157 mm, 8 mm, 10 mm, 12 mm, 14 mm, 16 mm, 18 mm, 20 mm, 22 mm, 24 mm, 26 mm, 27 mm, 30 mm, 32 mm5 3/8" to 17"15°15°PolishedChrome-Plated SteelFabric Pouch0000000000000
    176 mm, 7 mm, 8 mm, 9 mm, 10 mm, 11 mm, 12 mm, 13 mm, 14 mm, 15 mm, 16 mm, 17 mm, 18 mm, 19 mm, 20 mm, 21 mm, 22 mm5" to 11 3/4"15°15°DullChrome-Plated SteelFabric Pouch0000000000000
    187 mm, 8 mm, 9 mm, 10 mm, 11 mm, 12 mm, 13 mm, 14 mm, 15 mm, 16 mm, 17 mm, 18 mm, 19 mm, 20 mm, 21 mm, 22 mm, 23 mm, 24 mm5 1/4" to 12 3/4"15°15°PolishedChrome-Plated SteelFabric Roll-Up PouchASME B107.1000000000000000
     
    Value
     
    12-Point Opening
    610 mm, 11 mm, 12 mm, 13 mm, 14 mm, 15 mm5 1/2" to 8 11/16"15°15°PolishedSteelPlastic Organizer00000000000
    117 mm, 8 mm, 9 mm, 10 mm, 11 mm, 12 mm, 13 mm, 14 mm, 15 mm, 17 mm, 19 mm5 1/8" to 9 7/8"15°15°PolishedChrome-Plated SteelFabric Roll-Up Pouch00000000000
    146 mm, 7 mm, 8 mm, 9 mm, 10 mm, 11 mm, 12 mm, 13 mm, 14 mm, 15 mm, 16 mm, 17 mm, 18 mm, 19 mm3 19/32" to 8 41/64"15°15°PolishedChrome-Plated SteelFabric Roll-Up Pouch00000000000
    221/4", 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4", 13/16", 7/8", 9 mm, 10 mm, 11 mm, 12 mm, 13 mm, 14 mm, 15 mm, 16 mm, 17 mm, 18 mm, 19 mm4" to 10 7/32"15°15°DullChrome-Plated SteelPlastic Organizer000000000000
     

    Reversible Ratcheting Combination Wrench Sets

    Image of Product. Front orientation. Combination Wrenches. Reversible Ratcheting Combination Wrench Sets, Fabric Roll-Up Pouch.
    Image of Product. Front orientation. Combination Wrenches. Reversible Ratcheting Combination Wrench Sets, Plastic Roll-Up Pouch.

    Fabric Roll-Up Pouch

    Plastic Roll-Up Pouch

    Image of Product. Front orientation. Combination Wrenches. Reversible Ratcheting Combination Wrench Sets, Plastic Tray.

    Plastic Tray

    Image of Attribute. Front orientation. Contains Annotated. Reversible Ratcheting Combination Wrench Sets.
    Image of Attribute. Front orientation. Contains Annotated. Reversible Ratcheting Combination Wrench Sets.
    Image of Specification. Front orientation. ZoomedIn view. Contains Border. 12-Point Opening. Reversible Ratcheting Combination Wrench Sets.

    12-Point

    Opening

    With the flick of a lever, the wrenches in these sets go from loosening nuts and bolts to tightening them. Unlike other ratcheting wrenches, you can turn in either direction without having to flip them over. They're ideal for jobs with frequent pivots between tightening and loosening, such as assembly line maintenance.
    12-Point Opening—The most common opening, these wrenches work on hex and 12-point nuts and bolts. They slide onto hex heads at more angles than 6-point fasteners for quicker engagement, but they're more likely to slip when you apply more torque.
    Industrial—Made in the U.S. from high-strength steel or stainless steel, these wrenches are built to last. They’re indispensable for daily maintenance and repair.
    Value—Fill out your tool kit for a few dollars per wrench. Typically imported, these cost-friendly sets are the right choice for occasional maintenance.
    Polished—The smooth surface is easy to wipe clean of grime. The mirror-like finish lends a high-end look to any toolkit.
    Chrome-Plated Steel—The most popular finish, these wrenches won't rust or chip. Although they withstand moisture better than black oxide, they don't hold up to harsh chemicals as well as stainless steel.
    Box End
    No. of
    Pieces
    Drive Size, mm
    Overall Lg.
    Head Offset
    Angle
    Number
    of Teeth
    Open-End Opening
    Angle
    Appearance
    Material
    Container Type
    Specs. Met
    Each
    Industrial
     
    12-Point Opening
    1010, 11, 12, 13, 14, 15, 16, 17, 18, 197 1/16" to 12"15°8015°PolishedChrome-Plated SteelFabric Roll-Up Pouch00000000000000
     
    Value
     
    12-Point Opening
    421, 22, 24, 255 1/4" to 9 3/4"15°7215°PolishedChrome-Plated SteelPlastic Roll-Up PouchASME B107.10000000000000000
    88, 10, 12, 13, 14, 15, 17, 195 1/2" to 9 5/8"15°7215°PolishedChrome-Plated SteelPlastic TrayASME B107.1000000000000000
     

    Flex-Head Ratcheting Combination Wrench Sets

    Image of Product. Front orientation. Combination Wrenches. Flex-Head Ratcheting Combination Wrench Sets.
    Image of Attribute. Front orientation. Contains Annotated, Border. Flex-Head Ratcheting Combination Wrench Sets.
    Image of Attribute. Front orientation. Contains Annotated. Flex-Head Ratcheting Combination Wrench Sets.
    Image of Attribute. 12-Point Opening. Front orientation. ZoomedIn view. Contains Border. 12-Point Opening. Flex-Head Ratcheting Combination Wrench Sets.

    12-Point

    Opening

    Access a range of hard-to-reach fasteners without needing to remove obstructions. These wrenches are particularly useful where components are packed tightly, such as HVAC systems and conveyors. The box end swivels a full 180° to pivot around obstacles and give you leverage even at awkward angles. To switch between loosening and tightening, flip these wrenches over.
    12-Point Opening—The most common opening, these wrenches work on hex and 12-point nuts and bolts. They slide onto hex heads at more angles than 6-point fasteners for quicker engagement, but they're more likely to slip when you apply more torque.
    Polished—The smooth surface is easy to wipe clean of grime. The mirror-like finish lends a high-end look to any toolkit.
    Chrome-Plated Steel—The most popular finish, these wrenches won't rust or chip. Although they withstand moisture better than black oxide, they don't hold up to harsh chemicals as well as stainless steel.
    Box End
    No. of
    Pieces
    Drive Size, mm
    Overall Lg.
    Flex Range
    of Motion
    Number
    of Teeth
    Open-End Opening
    Angle
    Appearance
    Material
    Each
    12-Point Opening
    128, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 195 1/2" to 9 5/16"180°9015°PolishedChrome-Plated Steel00000000000000
     

    Tight-Clearance Angled Open-End Wrench Sets

    Image of Product. Front orientation. Open-End Wrenches. Tight-Clearance Angled Open-End Wrench Sets.
    Image of Attribute. Front orientation. Contains Annotated. Tight-Clearance Angled Open-End Wrench Sets.
    Image of Specification. Front orientation. ZoomedIn view. Contains Border. Round Opening. Tight-Clearance Angled Open-End Wrench Sets.
    Image of Specification. Front orientation. ZoomedIn view. Contains Border. Hex Opening. Tight-Clearance Angled Open-End Wrench Sets.

    Round

    Opening

    Hex Opening

    Keep a collection of sizes handy to turn thin, awkwardly placed fasteners tucked away in confined spaces. Use the 60° or 75° angled head to reach around obstacles and apply more force without constant repositioning. The two heads save you time and reduce the number of tools you need to keep on hand. Also known as ignition wrenches.
    Round Opening—The rounded edges spread force evenly to prevent stripping your fasteners. Use them on hex-head fasteners.
    Hex Opening—Snugly grip the sides rather then the corners of commonly used hex-head fasteners so they won't slip, even when the nuts and bolts are rusted or damaged.
    Chrome-Plated Steel—The most popular finish, these wrenches won't rust or chip. Although they withstand moisture better than black oxide, they don't hold up to harsh chemicals as well as stainless steel.
    Dull—With a textured finish, these wrenches won't slip out of your hands, even when greasy or oily.
    No. of
    Pieces
    Sizes Included
    Overall Lg.
    Opening
    Angle
    Appearance
    Container Type
    Specs. Met
    Each
    Round Opening
     
    Chrome-Plated Steel
    163.2 mm
    4 mm
    5 mm
    5.5 mm
    6 mm
    7 mm
    8 mm
    9 mm
    10 mm
    11 mm
    12 mm
    13 mm
    14 mm
    15 mm
    16 mm
    17 mm
    2 3/4" to 5 1/2"15° × 75°DullFabric Roll-Up Pouch00000000000000
     
    Hex Opening
     
    Chrome-Plated Steel
    1510 mm
    11 mm
    12 mm
    13 mm
    14 mm
    15 mm
    16 mm
    17 mm
    18 mm
    19 mm
    21 mm
    22 mm
    24 mm
    27 mm
    30 mm
    4 3/4" to 11"15° × 60°DullPlastic Roll-Up PouchASME B107.1000000000000000
     

    Spline Ratcheting Combination Wrench Sets

    Image of Product. Front orientation. Combination Wrenches. Spline Ratcheting Combination Wrench Sets.
    Image of Attribute. Front orientation. Contains Annotated. Standard Length, Sold as Sets, Ratcheting.
    Image of Specification. Spline Opening. Front orientation. ZoomedIn view. Contains Border. Spline Opening. Standard Length, Sold as Sets, Ratcheting.

    Spline Opening

    These versatile wrenches turn a range of hex, 12-point, and spline fasteners. With more points of contact than 12-point openings, the spline-shaped box end gets a better grip on nuts and bolts and is less likely to round off corners. Rotate these wrenches without having to remove and reposition them. They're commonly used where you don't have enough space for full turns. To switch between loosening and tightening, flip them over.
    Polished—The smooth surface is easy to wipe clean of grime. The mirror-like finish lends a high-end look to any toolkit.
    Chrome-Plated Steel—The most popular finish, these wrenches won't rust or chip. Although they withstand moisture better than black oxide, they don't hold up to harsh chemicals as well as stainless steel.
    Box End
    No. of
    Pieces
    Drive Size, mm
    External Spline Drive Size
    Number
    of Teeth
    Overall Lg.
    Open-End Opening
    Angle
    Appearance
    Material
    Container Type
    Each
    Spline Opening
    146, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19No. 6, No. 7, No. 8, No. 9, No. 10, No. 11, No. 12, No. 13, No. 14, No. 15, No. 16, No. 17, No. 18, No. 19724 15/16" to 11 1/16"15°PolishedChrome-Plated SteelPlastic Roll-Up Pouch00000000000000
     

    Miniature Open-End Wrench Sets

    Image of Product. Front orientation. Open-End Wrenches. Miniature Open-End Wrench Sets.
    Image of Attribute. Front orientation. Contains Annotated. Miniature Open-End Wrench Sets.
    Image of Specification. Front orientation. ZoomedIn view. Contains Border. Hex Opening. Miniature Open-End Wrench Sets.

    Hex Opening

    Take on precision tasks with assorted sizes of extra slim heads. The wrenches in these sets are just the right size for assembling electronics, building models, and repairing small appliances.
    Hex Opening—Snugly grip the sides rather then the corners of commonly used hex-head fasteners so they won't slip, even when the nuts and bolts are rusted or damaged.
    Black-Oxide Steel—The dark, matte coating protects these wrenches from wear and won't flake off. They offer minimal corrosion resistance, though, so they're best for dry environments.
    No. of
    Pieces
    Sizes Included
    Overall
    Lg.
    Opening
    Angle
    Container
    Type
    Each
    Hex Opening
     
    Black-Oxide Steel
    82.5 mm
    3 mm
    3.2 mm
    4 mm
    5 mm
    5.5 mm
    6 mm
    7 mm
    4 1/8"30°Plastic Pouch0000000000000
     

    Ratcheting Combination Wrench Sets

    Image of Product. Front orientation. Combination Wrenches. Ratcheting Combination Wrench Sets.
    Image of Attribute. Front orientation. Contains Annotated. Ratcheting Combination Wrench Sets.
    Image of Specification. Front orientation. ZoomedIn view. Contains Border. 12-Point Opening. Ratcheting Combination Wrench Sets.

    12-Point

    Opening

    Turn a variety of nuts and bolts without having to remove and reposition these wrenches. They're commonly used where you don't have enough space for full turns. Just flip them over when you need to switch between tightening and loosening.
    12-Point Opening—The most common opening, these wrenches work on hex and 12-point nuts and bolts. They slide onto hex heads at more angles than 6-point fasteners for quicker engagement, but they're more likely to slip when you apply more torque.
    Polished—The smooth surface is easy to wipe clean of grime. The mirror-like finish lends a high-end look to any toolkit.
    Chrome-Plated Steel—The most popular finish, these wrenches won't rust or chip. Although they withstand moisture better than black oxide, they don't hold up to harsh chemicals as well as stainless steel.
    No. of
    Pieces
    Drive Size, mm
    Overall Lg.
    No. of
    Teeth
    Open-End Opening
    Angle
    Appearance
    Material
    Container Type
    Each
    12-Point Opening
    1010, 11, 12, 13, 14, 15, 16, 17, 18, 197 1/16" to 12"8015°PolishedChrome-Plated SteelFabric Roll-Up Pouch00000000000000
     

    Self-Adjusting Ratcheting Box Wrench Head Sets

    Image of ProductInUse. Wrench and Socket Extension Not Included. Front orientation. Wrench Heads. Self-Adjusting Ratcheting Box Wrench Head Sets.
    Image of Product. Front orientation. Wrench Heads. Self-Adjusting Ratcheting Box Wrench Head Sets.

    Wrench and Socket

    Extension Not Included

    Get a strong grip in tight areas, even on fasteners that are rounded or damaged. Open the spring-loaded jaws in these heads to access a fastener like an open-end wrench; the jaws will automatically close when you push against the fastener. The 6-point opening grips hex heads on all sides. Also known as crowfoot wrenches. Attach one to a socket extension to reach obstructed fasteners. With the ratcheting feature, you can turn the fastener without removing and repositioning the wrench head.
    No. of
    Pieces
    Includes
    Turn Req.
    to Ratchet
    Material
    Wrench Opening
    Shape
    Container
    Type
    Each
    3/8" Square Drive
    6Wrench Heads: 8 mm, 10 mm, 11 mm, 12 mm, 13 mm, 14 mm15°Stainless Steel6-PointFoam Tray0000000000000000
     

    Stubby Ratcheting Combination Wrench Sets

    Image of Product. Front orientation. Combination Wrenches. Stubby Ratcheting Combination Wrench Sets.
    Image of Product. Front orientation. Combination Wrenches. Stubby Ratcheting Combination Wrench Sets, Fabric Roll-Up Pouch.

    Fabric Roll-Up Pouch

    Image of Attribute. Front orientation. Contains Annotated. Stubby Ratcheting Combination Wrench Sets.
    Image of Specification. Front orientation. ZoomedIn view. Contains Border. 12-Point Opening. Stubby Ratcheting Combination Wrench Sets.

    12-Point

    Opening

    Turn nuts and bolts in tight spaces without removing and repositioning the wrenches in these sets. They’re up to 50% shorter than others to squeeze into spots without enough clearance to make full turns, such as engine compartments. When you need more leverage, opt for standard-length ratcheting wrenches.
    12-Point Opening—The most common opening, these wrenches work on hex and 12-point nuts and bolts. They slide onto hex heads at more angles than 6-point fasteners for quicker engagement, but they're more likely to slip when you apply more torque.
    Industrial—Made in the U.S. from high-strength steel or stainless steel, these wrenches are built to last. They’re indispensable for daily maintenance and repair.
    Value—Fill out your tool kit for a few dollars per wrench. Typically imported, these cost-friendly sets are the right choice for occasional maintenance.
    Polished—The smooth surface is easy to wipe clean of grime. The mirror-like finish lends a high-end look to any toolkit.
    Chrome-Plated Steel—The most popular finish, these wrenches won't rust or chip. Although they withstand moisture better than black oxide, they don't hold up to harsh chemicals as well as stainless steel.
    No. of
    Pieces
    Drive Size, mm
    Overall Lg.
    No. of
    Teeth
    Open-End Opening
    Angle
    Appearance
    Material
    Container Type
    Specs. Met
    Each
    Industrial
     
    12-Point Opening
    1010, 11, 12, 13, 14, 15, 16, 17, 18, 193 1/2" to 5 3/8"7215°PolishedChrome-Plated SteelFabric Roll-Up Pouch00000000000000
     
    Value
     
    12-Point Opening
    1010, 11, 12, 13, 14, 15, 16, 17, 18, 193 3/4" to 5 1/2"7215°PolishedChrome-Plated SteelASME B107.1000000000000000
     

    Double Open-End Wrench Sets

    Image of Product. Front orientation. Open-End Wrenches. Double Open-End Wrench Sets, Fabric Roll-Up Pouch.

    Fabric Roll-Up Pouch

    Image of Product. Front orientation. Open-End Wrenches. Double Open-End Wrench Sets, Plastic Roll-Up Pouch.

    Plastic Roll-Up

    Pouch

    Image of Attribute. Front orientation. Contains Annotated. Double Open-End Wrench Sets.
    Image of Specification. Front orientation. ZoomedIn view. Contains Border. Round Opening. Double Open-End Wrench Sets.

    Round

    Opening

    Keep a range of sizes on hand to switch between two different-sized fasteners without swapping out your wrenches. The two heads save you time and reduce the number of tools you need to keep on hand. Drop forged for added strength, these wrenches will be part of your toolbox for life.
    Round Opening—The rounded edges spread force evenly to prevent stripping your fasteners. Use them on hex-head fasteners.
    Chrome-Plated Steel—The most popular finish, these wrenches won't rust or chip. Although they withstand moisture better than black oxide, they don't hold up to harsh chemicals as well as stainless steel.
    Dull—With a textured finish, these wrenches won't slip out of your hands, even when greasy or oily.
    Polished—The smooth surface is easy to wipe clean of grime. The mirror-like finish lends a high-end look to any toolkit.
    No. of
    Pieces
    Sizes Included
    Overall Lg.
    Opening
    Angle
    Appearance
    Container Type
    Specs. Met
    Each
    Round Opening
     
    Chrome-Plated Steel
    84 mm × 5 mm
    6 mm × 7 mm
    8 mm × 9 mm
    10 mm × 11 mm
    12 mm × 13 mm
    14 mm × 15 mm
    16 mm × 17 mm
    18 mm × 19 mm
    4" to 8 3/4"15°DullPlastic Roll-Up PouchDIN 31100000000000000
    106 mm × 7 mm
    8 mm × 9 mm
    10 mm × 11 mm
    12 mm × 13 mm
    14 mm × 15 mm
    16 mm × 17 mm
    18 mm × 19 mm
    20 mm × 22 mm
    21 mm × 23 mm
    24 mm × 26 mm (Dull Appearance)
    4 1/2" to 12 3/8"15°PolishedFabric Roll-Up PouchASME B107.1000000000000000
    126 mm × 7 mm
    8 mm × 9 mm
    10 mm × 11 mm
    12 mm × 13 mm
    14 mm × 15 mm
    16 mm × 17 mm
    18 mm × 19 mm
    20 mm × 22 mm
    21 mm × 23 mm
    24 mm × 26 mm
    25 mm × 28 mm
    27 mm × 30 mm
    4 1/2" to 11 7/8"15°DullPlastic Roll-Up Pouch0000000000000
     

    Stubby Reversible Ratcheting Combination Wrench Sets

    Image of Product. Front orientation. Combination Wrenches. Stubby Reversible Ratcheting Combination Wrench Sets.
    Image of Attribute. Front orientation. Contains Annotated. Stubby Reversible Ratcheting Combination Wrench Sets.
    Image of Attribute. Front orientation. Contains Annotated. Stubby Reversible Ratcheting Combination Wrench Sets.
    Image of Specification. Front orientation. ZoomedIn view. Contains Border. 12-Point Opening. Stubby Reversible Ratcheting Combination Wrench Sets.

    12-Point

    Opening

    The ultimate tool for ratcheting in tight spaces—in an array of sizes. They’re up to 50% shorter than others to squeeze into spots without enough clearance to make full turns, such as engine compartments. With the flick of a lever, these wrenches go from loosening nuts and bolts to tightening them.
    12-Point Opening—The most common opening, these wrenches work on hex and 12-point nuts and bolts. They slide onto hex heads at more angles than 6-point fasteners for quicker engagement, but they're more likely to slip when you apply more torque.
    Chrome-Plated Steel—The most popular finish, these wrenches won't rust or chip. Although they withstand moisture better than black oxide, they don't hold up to harsh chemicals as well as stainless steel.
    Polished—The smooth surface is easy to wipe clean of grime. The mirror-like finish lends a high-end look to any toolkit.
    Box End
    Drive Size, mm
    Overall Lg.
    Head Offset
    Angle
    Number
    of Teeth
    Open-End Opening
    Angle
    Appearance
    Each
    12-Point Opening
     
    Chrome-Plated Steel
    8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 193 1/2" to 5 1/2"15°6015°Polished00000000000000
     

    Stubby Combination Wrench Sets

    Image of Product. Front orientation. Combination Wrenches. Stubby Combination Wrench Sets, Fabric Roll-Up Pouch.
    Image of Product. Front orientation. Combination Wrenches. Stubby Combination Wrench Sets, Plastic Roll-Up Pouch.

    Fabric Roll-Up Pouch

    Plastic Roll-Up Pouch

    Image of Attribute. Front orientation. Contains Annotated. Stubby Combination Wrench Sets.
    Image of Attribute. Front orientation. Contains Annotated. Stubby Combination Wrench Sets.
    Image of Specification. 12-Point Opening. Front orientation. ZoomedIn view. Contains Border. 12-Point Opening. Stubby Combination Wrench Sets.

    12-Point

    Opening

    Turn nuts and bolts in tight spaces with the wrenches in these sets. They are up to 50% shorter than others to squeeze into spots without enough clearance to make full turns, such as engine compartments. However, you may need longer wrenches for higher-leverage jobs.
    12-Point Opening—The most common opening, these wrenches work on hex and 12-point nuts and bolts. They slide onto hex heads at more angles than 6-point fasteners for quicker engagement, but they're more likely to slip when you apply more torque.
    Chrome-Plated Steel—The most popular finish, these wrenches won't rust or chip. Although they withstand moisture better than black oxide, they don't hold up to harsh chemicals as well as stainless steel.
    Polished—The smooth surface is easy to wipe clean of grime. The mirror-like finish lends a high-end look to any toolkit.
    No. of
    Pieces
    Drive Size, mm
    Overall Lg.
    Box-End Head
    Offset Angle
    Open-End Opening
    Angle
    Appearance
    Container Type
    Specs. Met
    Each
    12-Point Opening
     
    Chrome-Plated Steel
    77, 8, 9, 10, 11, 12, 133 3/8" to 4 5/16"15°15°PolishedFabric Roll-Up Pouch00000000000000
    146, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 193 1/4" to 5 1/2"15°15°PolishedPlastic Roll-Up PouchASME B107.10000000000000000
     

    Wrench Head Sets

    Image of ProductInUse. Wrench and Socket Extension Not Included. Front orientation. Wrench Heads. Wrench Head Sets.

    Wrench and

    Socket

    Extension Not

    Included

    Image of Product. Wrench Head Set. Front orientation. Wrench Heads. Wrench Head Sets.
    Image of Product. Wrench Head Set with Metal Clip Rail. Front orientation. Wrench Heads. Wrench Head Sets, Metal Clip Rail.

    Wrench Head Set

    Wrench Head Set with Metal Clip

    Rail

    Image of Product. Wrench Head Set with Plastic Clip Rail. Front orientation. Wrench Heads. Wrench Head Sets, Plastic Clip Rail.

    Wrench Head Set with

    Plastic Clip Rail

    Reach nuts obstructed by a fluid line or other barrier with the wrench heads in these sets. Connect them to a socket extension and ratchet wrench to turn fasteners where clearance is limited from both the top and side. You can also attach one directly to your ratchet wrench to convert it into an open-ended ratcheting wrench. Also known as crowfoot wrenches.
    No. of
    Pieces
    Includes
    Material
    Wrench Opening
    Shape
    Container Type
    Each
    1/4" Square Drive
    7Wrench Heads: 7 mm, 8 mm, 10 mm, 11 mm, 12 mm, 13 mm, 14 mmChrome-Plated SteelRound000000000000000
     
    3/8" Square Drive
    10Wrench Heads: 10 mm, 11 mm, 12 mm, 13 mm, 14 mm, 15 mm, 16 mm, 17 mm, 18 mm, 19 mmChrome-Plated SteelRoundMetal Clip Rail0000000000000
    30Wrench Heads (Inch): 5/16", 11/32", 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4", 13/16", 7/8", 15/16", 1"
    Wrench Heads (Metric): 8 mm, 9 mm, 10 mm, 11 mm, 12 mm, 13 mm, 14 mm, 15 mm, 16 mm, 17 mm, 18 mm, 19 mm, 20 mm, 21 mm, 22 mm, 23 mm, 24 mm
    Nickel-Plated SteelRoundPlastic Clip Rail00000000000000
     

    Stubby Open-End Wrench Sets

    Image of Product. Front orientation. Open-End Wrenches. Stubby Open-End Wrench Sets.
    Image of Attribute. Front orientation. Contains Annotated. Stubby Open-End Wrench Sets.
    Image of Specification. Front orientation. ZoomedIn view. Contains Border. Round Opening. Stubby Open-End Wrench Sets.

    Round

    Opening

    Assorted sizes of these short open-end wrenches are perfect for spots that don't have enough clearance for full-sized tools. Their compact design lets you make full turns without hitting or disassembling surrounding parts. They are often used to fasten bolts in cramped engine compartments and tight plumbing jobs. For tasks that require more muscle, longer wrenches may be necessary.
    Round Opening—The rounded edges spread force evenly to prevent stripping your fasteners. Use them on hex-head fasteners.
    Chrome-Plated Steel—The most popular finish, these wrenches won't rust or chip. Although they withstand moisture better than black oxide, they don't hold up to harsh chemicals as well as stainless steel.
    Dull—With a textured finish, these wrenches won't slip out of your hands, even when greasy or oily.
    No. of
    Pieces
    Sizes Included
    Overall Lg.
    Opening
    Angle
    Appearance
    Container Type
    Specs.
    Met
    Each
    Round Opening
     
    Chrome-Plated Steel
    63.2 mm × 5.5 mm
    4 mm × 5 mm
    6 mm × 7 mm
    8 mm × 9 mm
    10 mm × 11 mm
    12 mm × 13 mm
    2 3/4" to 4 3/8"15°DullPlastic Roll-Up PouchISO 33180000000000000
     

    Sure Grip Wrench Head Sets

    Image of ProductInUse. Wrench and Socket Extension Not Included. Front orientation. Wrench Heads. Sure Grip Wrench Head Sets.
    Image of Product. Front orientation. Wrench Heads. Sure Grip Wrench Head Sets.

    Wrench and

    Socket Extension

    Not Included

    Grip more of your fastener head with these wrench heads. They have a hex or 12-point opening with more surface area than rounded wrench heads, so they make more contact with fasteners for a better hold. Also known as flare-nut crowfoot wrenches or line wrenches, they're often used with flared tube fittings as well as fuel and hydraulic lines. Connect them to a socket extension and ratchet wrench to turn fasteners where clearance is limited from both the top and side. You can also attach one directly to your ratchet wrench to convert it into an open-ended ratcheting wrench.
    No. of
    Pieces
    Includes
    Material
    Wrench Opening
    Shape
    Container Type
    Each
    3/8" Square Drive
    18Wrench Heads: 8 mm, 9 mm, 10 mm, 11 mm, 12 mm, 13 mm, 14 mm, 15 mm, 16 mm, 17 mm, 18 mm, 19 mm, 20 mm, 21 mm, 22 mm, 23 mm, 24 mm, 27 mmNickel-Plated SteelHex Sure GripPlastic Clip Rail000000000000000
     

    Tight-Clearance Open-End Wrench Sets

    Image of Product. Front orientation. Open-End Wrenches. Tight-Clearance Open-End Wrench Sets.
    Image of Attribute. Front orientation. Contains Annotated. Tight-Clearance Open-End Wrench Sets.
    Image of Specification. Front orientation. ZoomedIn view. Contains Border. Round Opening. Tight-Clearance Open-End Wrench Sets.

    Round

    Opening

    Twist various sizes of thin fasteners in cramped spots where other wrenches are too bulky. With a head and handle about half as thick as standard wrenches, it's easier to grip nuts found in electrical enclosures and small machinery. These wrenches are ASME certified—they handle more torque than run-of-the-mill alternatives and precisely fit fasteners so they don't round them off. Drop forged for added strength, they will be part of your toolbox for life. Also known as check nut or service wrenches.
    Round Opening—The rounded edges spread force evenly to prevent stripping your fasteners. Use them on hex-head fasteners.
    Black-Oxide Steel—The dark, matte coating protects these wrenches from wear and won't flake off. They offer minimal corrosion resistance, though, so they're best for dry environments.
    Chrome-Plated Steel—The most popular finish, these wrenches won't rust or chip. Although they withstand moisture better than black oxide, they don't hold up to harsh chemicals as well as stainless steel.
    Dull—With a textured finish, these wrenches won't slip out of your hands, even when greasy or oily.
    No. of
    Pieces
    Sizes Included
    Overall Lg.
    Opening
    Angle
    Appearance
    Container Type
    Specs. Met
    Each
    Round Opening
     
    Black-Oxide Steel
    910 mm
    11 mm
    12 mm
    13 mm
    14 mm
    15 mm
    16 mm
    17 mm
    19 mm
    4" to 6 1/8"15°Plastic Roll-Up PouchASME B107.10000000000000000
     
    Chrome-Plated Steel
    1119 mm
    21 mm
    22 mm
    24 mm
    27 mm
    30 mm
    32 mm
    36 mm
    37 mm
    38 mm
    40 mm
    6 3/8" to 8"30°DullPlastic Roll-Up PouchASME B107.1000000000000000
     

    Tight-Clearance Double Open-End Wrench Sets

    Image of Product. Front orientation. Open-End Wrenches. Tight-Clearance Double Open-End Wrench Sets, Fabric Roll-Up Pouch.

    Fabric Roll-Up

    Pouch

    Image of Attribute. Front orientation. Contains Annotated. Tight-Clearance Double Open-End Wrench Sets.
    Image of Specification. Front orientation. ZoomedIn view. Contains Border. Round Opening. Tight-Clearance Double Open-End Wrench Sets.

    Round

    Opening

    Keep multiple sizes on hand to twist two different-sized, thin fasteners in the tightest nooks without the hassle of changing tools. Drop forged for added strength, these wrenches will be part of your toolbox for life. Also known as tappet wrenches.
    Round Opening—The rounded edges spread force evenly to prevent stripping your fasteners. Use them on hex-head fasteners.
    Chrome-Plated Steel—The most popular finish, these wrenches won't rust or chip. Although they withstand moisture better than black oxide, they don't hold up to harsh chemicals as well as stainless steel.
    Dull—With a textured finish, these wrenches won't slip out of your hands, even when greasy or oily.
    No. of
    Pieces
    Sizes Included
    Overall Lg.
    Opening
    Angle
    Appearance
    Container Type
    Each
    Round Opening
     
    Chrome-Plated Steel
    68 mm × 9 mm
    10 mm × 11 mm
    12 mm × 13 mm
    14 mm × 15 mm
    16 mm × 17 mm
    18 mm × 19 mm
    6 7/8" to 9 7/8"15°DullFabric Roll-Up Pouch000000000000000
     

    Sure-Grip Open-End Wrench Sets

    Image of Product. Front orientation. Open-End Wrenches. Sure-Grip Open-End Wrench Sets.
    Image of Attribute. Front orientation. Contains Annotated. Sure-Grip Open-End Wrench Sets.
    Image of Attribute. Front orientation. Contains Annotated. Sure-Grip Open-End Wrench Sets.
    Image of Specification. Front orientation. ZoomedIn view. Contains Border. Hex Sure-Grip Opening. Sure-Grip Open-End Wrench Sets.

    Hex

    Sure-Grip

    Opening

    Get a firm hold on various sizes of flare nuts and fittings to create leak-tight seals on tubing without cracking it. The heads on these wrenches have recessed corners to distribute turning force more evenly than standard wrenches, preventing stripping and slipping. They're well-suited for tight spots on refrigeration, brake, fuel, or hydraulic lines. Also known as flare-nut or line wrenches.
    Hex Sure-Grip Opening—Avoid rounding off the corners of hex-head fasteners. These wrenches won't slip, even when nuts and bolts are rusted or damaged, since they grip the sides rather than the corners.
    Chrome-Plated Steel—The most popular finish, these wrenches won't rust or chip. Although they withstand moisture better than black oxide, they don't hold up to harsh chemicals as well as stainless steel.
    Dull—With a textured finish, these wrenches won't slip out of your hands, even when greasy or oily.
    No. of
    Pieces
    Sizes Included
    Overall Lg.
    Head
    Style
    Head Offset
    Angle
    Opening
    Angle
    Appearance
    Container Type
    Each
    Hex Sure-Grip Opening
     
    Chrome-Plated Steel
    57 mm × 8 mm
    9 mm × 11 mm
    10 mm × 12 mm
    13 mm × 14 mm
    15 mm × 17 mm
    5 3/4" to 8"Offset15°StraightDullFabric Roll-Up Pouch00000000000000
     

    Ratcheting Wrench Head Sets

    Image of ProductInUse. Wrench and Socket Extension Not Included. Front orientation. Wrench Heads. Ratcheting Wrench Head Sets.
    Image of Product. Front orientation. Wrench Heads. Ratcheting Wrench Head Sets.

    Wrench and

    Socket Extension

    Not Included

    Connect one of the heads in these sets to a socket extension to reach an obstructed fastener, then turn the fastener without removing and repositioning the wrench head. These also work well where clearance is limited from both the top and side. Alternatively, attach a head directly to a wrench handle to convert it into an open-ended ratcheting wrench. Also known as crowfoot wrenches.
    No. of
    Pieces
    Includes
    Turn Req.
    to Ratchet
    Material
    Wrench Opening
    Shape
    Container
    Type
    Each
    3/8" Square Drive
    10Wrench Heads: 10 mm, 11 mm, 12 mm, 13 mm, 14 mm, 15 mm, 16 mm, 17 mm, 18 mm, 19 mm60°Chrome-Plated SteelHexPlastic Case0000000000000000
     
    back to top