McMaster-Carr logo
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Comments
    E-mail address (if you would like a response)
    115 Products

    Pull-Out Dowel Pins
    3D CAD models available

    Remove pins even when you only have access to one end or they sit flush with the surface of your part. With one internally threaded end, they are easier to remove than most dowel pins. Thread a screw into the pin and then pull with the removal tool (sold separately). You can also pull the screw with pliers, but there’s more risk of damaging the hole.
    Steel
    Image of Product. Front orientation. Dowel Pins. Pull-Out Dowel Pins.
    High-Strength Alloy Steel—Our strongest, most wear-resistant pins, these won't bend or break from vibration. Use them for high-stress applications, such as mounting and aligning hydraulic cylinders and injection molds. They perform best in dry environments since moisture will cause them to rust.
    Spring Steel—These pins won't deform from stress and vibration. They're stronger than stainless steel but not quite as strong as alloy steel. Pins perform best in dry environments since moisture will cause them to rust.
    Puller Handle—A complete removal tool requires a puller handle and a tip that fits your pin diameter. To use, thread a tip into the puller handle and then place the tip over the screw in your pin. Slide the weight along the handle to pull the pin out.
    Lg.,
    mm
    Dia. Tolerance
    Thread Size
    Min.
    Hardness
    Breaking Strength,
    lbf
    Specs. Met
    Each
    High-Strength Alloy Steel
     
    16 mm Diameter
    320.007 mm to 0.018 mmM8 × 1.25 mmRockwell C5233,500DIN 7979D-M600000000000000
    360.007 mm to 0.018 mmM8 × 1.25 mmRockwell C5233,500DIN 7979D-M60000000000000
    400.007 mm to 0.018 mmM8 × 1.25 mmRockwell C5233,500DIN 7979D-M60000000000000
    500.007 mm to 0.018 mmM8 × 1.25 mmRockwell C5233,500DIN 7979D-M60000000000000
    600.007 mm to 0.018 mmM8 × 1.25 mmRockwell C5233,500DIN 7979D-M60000000000000
    700.007 mm to 0.018 mmM8 × 1.25 mmRockwell C5233,500DIN 7979D-M60000000000000
     
    20 mm Diameter
    500.008 mm to 0.021 mmM10 × 1.5 mmRockwell C5251,500DIN 7979D-M60000000000000
    600.008 mm to 0.021 mmM10 × 1.5 mmRockwell C5251,500DIN 7979D-M600000000000000
    800.008 mm to 0.021 mmM10 × 1.5 mmRockwell C5251,500DIN 7979D-M600000000000000
     
    Spring Steel
     
    6 mm Diameter
    160.004 mm to 0.012 mmM4 × 0.7 mmRockwell C526,600DIN 7979D-M60000000000000
    180.004 mm to 0.012 mmM4 × 0.7 mmRockwell C526,600DIN 7979D-M60000000000000
    200.004 mm to 0.012 mmM4 × 0.7 mmRockwell C526,600DIN 7979D-M60000000000000
    240.004 mm to 0.012 mmM4 × 0.7 mmRockwell C526,600DIN 7979D-M60000000000000
    280.004 mm to 0.012 mmM4 × 0.7 mmRockwell C526,600DIN 7979D-M60000000000000
    300.004 mm to 0.012 mmM4 × 0.7 mmRockwell C526,600DIN 7979D-M60000000000000
    320.004 mm to 0.012 mmM4 × 0.7 mmRockwell C526,600DIN 7979D-M60000000000000
    360.004 mm to 0.012 mmM4 × 0.7 mmRockwell C526,600DIN 7979D-M60000000000000
    400.004 mm to 0.012 mmM4 × 0.7 mmRockwell C526,600DIN 7979D-M60000000000000
    500.004 mm to 0.012 mmM4 × 0.7 mmRockwell C526,600DIN 7979D-M60000000000000
    600.004 mm to 0.012 mmM4 × 0.7 mmRockwell C526,600DIN 7979D-M60000000000000
     
    8 mm Diameter
    200.006 mm to 0.015 mmM5 × 0.8 mmRockwell C5210,400DIN 7979D-M60000000000000
    240.006 mm to 0.015 mmM5 × 0.8 mmRockwell C5210,400DIN 7979D-M60000000000000
    280.006 mm to 0.015 mmM5 × 0.8 mmRockwell C5210,400DIN 7979D-M60000000000000
    300.006 mm to 0.015 mmM5 × 0.8 mmRockwell C5210,400DIN 7979D-M60000000000000
    320.006 mm to 0.015 mmM5 × 0.8 mmRockwell C5210,400DIN 7979D-M60000000000000
    360.006 mm to 0.015 mmM5 × 0.8 mmRockwell C5210,400DIN 7979D-M60000000000000
    400.006 mm to 0.015 mmM5 × 0.8 mmRockwell C5210,400DIN 7979D-M60000000000000
    500.006 mm to 0.015 mmM5 × 0.8 mmRockwell C5210,400DIN 7979D-M60000000000000
    600.006 mm to 0.015 mmM5 × 0.8 mmRockwell C5210,400DIN 7979D-M60000000000000
    700.006 mm to 0.015 mmM5 × 0.8 mmRockwell C5210,400DIN 7979D-M60000000000000
    800.006 mm to 0.015 mmM5 × 0.8 mmRockwell C5210,400DIN 7979D-M60000000000000
     
    10 mm Diameter
    240.006 mm to 0.015 mmM6 × 1 mmRockwell C52Not RatedDIN 7979D-M60000000000000
    280.006 mm to 0.015 mmM6 × 1 mmRockwell C52Not RatedDIN 7979D-M60000000000000
    300.006 mm to 0.015 mmM6 × 1 mmRockwell C52Not RatedDIN 7979D-M60000000000000
    320.006 mm to 0.015 mmM6 × 1 mmRockwell C52Not RatedDIN 7979D-M60000000000000
    360.006 mm to 0.015 mmM6 × 1 mmRockwell C52Not RatedDIN 7979D-M60000000000000
    400.006 mm to 0.015 mmM6 × 1 mmRockwell C52Not RatedDIN 7979D-M60000000000000
    500.006 mm to 0.015 mmM6 × 1 mmRockwell C52Not RatedDIN 7979D-M60000000000000
    600.006 mm to 0.015 mmM6 × 1 mmRockwell C52Not RatedDIN 7979D-M60000000000000
    700.006 mm to 0.015 mmM6 × 1 mmRockwell C52Not RatedDIN 7979D-M60000000000000
    800.006 mm to 0.015 mmM6 × 1 mmRockwell C52Not RatedDIN 7979D-M60000000000000
     
    12 mm Diameter
    240.007 mm to 0.018 mmM6 × 1 mmRockwell C5224,000DIN 7979D-M60000000000000
    300.007 mm to 0.018 mmM6 × 1 mmRockwell C5224,000DIN 7979D-M60000000000000
    360.007 mm to 0.018 mmM6 × 1 mmRockwell C5224,000DIN 7979D-M60000000000000
    450.007 mm to 0.018 mmM6 × 1 mmRockwell C5224,000DIN 7979D-M60000000000000
    500.007 mm to 0.018 mmM6 × 1 mmRockwell C5224,000DIN 7979D-M60000000000000
    600.007 mm to 0.018 mmM6 × 1 mmRockwell C5224,000DIN 7979D-M60000000000000
     

    Vented Pull-Out Dowel Pins
    3D CAD models available

    Insert and remove from blind holes with less effort than pins that aren't vented. The vent relieves trapped air, so pressure doesn't create resistance as you install the pin. Because they have a tapped end, you can thread in a screw and pull the pin out with a removal tool (sold separately). You can also pull using pliers, but there’s more risk of damaging the hole.
    Flat Shaft
    Image of Product. Front orientation. Dowel Pins. Vented Pull-Out Dowel Pins, Flat Shaft.
    The flat side of these pins creates a vent that's less likely to be blocked than a spiral shaft, but doesn’t offer quite as strong of a hold.
    High-Strength Alloy Steel—Our strongest, most wear-resistant pins, these won't bend or break from vibration. Use them for high-stress applications, such as mounting and aligning hydraulic cylinders and injection molds. They perform best in dry environments since moisture will cause them to rust.
    Spring Steel—These pins won't deform from stress and vibration. They're stronger than stainless steel but not quite as strong as alloy steel. Pins perform best in dry environments since moisture will cause them to rust.
    18-8 Stainless Steel—The choice for wet and outdoor environments. In addition to resisting rust, these pins also withstand mild chemicals such as cleaners and degreasers. They are strong enough to join most components but won't withstand extreme stress and vibration as well as steel.
    Passivated—With an added layer of protection, these pins stand up to strong acids and other harsh chemicals.
    Puller Handle—A complete removal tool requires a puller handle and a tip that fits your pin diameter. To use, thread a tip into the puller handle and then place the tip over the screw in your pin. Slide the weight along the handle to pull the pin out.
    Lg.,
    mm
    Dia. Tolerance,
    mm
    Thread Size
    Min.
    Hardness
    Breaking Strength,
    lbf
    Passivation
    Specs. Met
    Each
    High-Strength Alloy Steel
     
    16 mm Diameter
    320.007 to 0.018M8 × 1.25 mmRockwell C5233,500__DIN 7979D-M600000000000000
    400.007 to 0.018M8 × 1.25 mmRockwell C5233,500__DIN 7979D-M60000000000000
    500.007 to 0.018M8 × 1.25 mmRockwell C5233,500__DIN 7979D-M60000000000000
    600.007 to 0.018M8 × 1.25 mmRockwell C5233,500__DIN 7979D-M60000000000000
    700.007 to 0.018M8 × 1.25 mmRockwell C5233,500__DIN 7979D-M60000000000000
    800.007 to 0.018M8 × 1.25 mmRockwell C5233,500__DIN 7979D-M60000000000000
     
    Spring Steel
     
    6 mm Diameter
    160.004 to 0.012M4 × 0.7 mmRockwell C526,600__DIN 7979D-M60000000000000
    180.004 to 0.012M4 × 0.7 mmRockwell C526,600__DIN 7979D-M60000000000000
    200.004 to 0.012M4 × 0.7 mmRockwell C526,600__DIN 7979D-M60000000000000
    240.004 to 0.012M4 × 0.7 mmRockwell C526,600__DIN 7979D-M60000000000000
    280.004 to 0.012M4 × 0.7 mmRockwell C526,600__DIN 7979D-M60000000000000
    300.004 to 0.012M4 × 0.7 mmRockwell C526,600__DIN 7979D-M60000000000000
    360.004 to 0.012M4 × 0.7 mmRockwell C526,600__DIN 7979D-M60000000000000
    400.004 to 0.012M4 × 0.7 mmRockwell C526,600__DIN 7979D-M60000000000000
    500.004 to 0.012M4 × 0.7 mmRockwell C526,600__DIN 7979D-M60000000000000
     
    8 mm Diameter
    200.006 to 0.015M5 × 0.8 mmRockwell C5210,400__DIN 7979D-M60000000000000
    240.006 to 0.015M5 × 0.8 mmRockwell C5210,400__DIN 7979D-M60000000000000
    280.006 to 0.015M5 × 0.8 mmRockwell C5210,400__DIN 7979D-M60000000000000
    300.006 to 0.015M5 × 0.8 mmRockwell C5210,400__DIN 7979D-M60000000000000
    360.006 to 0.015M5 × 0.8 mmRockwell C5210,400__DIN 7979D-M60000000000000
    400.006 to 0.015M5 × 0.8 mmRockwell C5210,400__DIN 7979D-M60000000000000
    500.006 to 0.015M5 × 0.8 mmRockwell C5210,400__DIN 7979D-M60000000000000
    600.006 to 0.015M5 × 0.8 mmRockwell C5210,400__DIN 7979D-M60000000000000
    700.006 to 0.015M5 × 0.8 mmRockwell C5210,400__DIN 7979D-M60000000000000
     
    10 mm Diameter
    240.006 to 0.015M6 × 1 mmRockwell C52Not Rated__DIN 7979D-M60000000000000
    280.006 to 0.015M6 × 1 mmRockwell C52Not Rated__DIN 7979D-M60000000000000
    300.006 to 0.015M6 × 1 mmRockwell C52Not Rated__DIN 7979D-M60000000000000
    360.006 to 0.015M6 × 1 mmRockwell C52Not Rated__DIN 7979D-M60000000000000
    400.006 to 0.015M6 × 1 mmRockwell C52Not Rated__DIN 7979D-M60000000000000
    500.006 to 0.015M6 × 1 mmRockwell C52Not Rated__DIN 7979D-M60000000000000
    600.006 to 0.015M6 × 1 mmRockwell C52Not Rated__DIN 7979D-M60000000000000
    700.006 to 0.015M6 × 1 mmRockwell C52Not Rated__DIN 7979D-M60000000000000
     
    12 mm Diameter
    240.007 to 0.018M6 × 1 mmRockwell C5224,000__DIN 7979D-M60000000000000
    300.007 to 0.018M6 × 1 mmRockwell C5224,000__DIN 7979D-M60000000000000
    360.007 to 0.018M6 × 1 mmRockwell C5224,000__DIN 7979D-M60000000000000
    400.007 to 0.018M6 × 1 mmRockwell C5224,000__DIN 7979D-M60000000000000
    450.007 to 0.018M6 × 1 mmRockwell C5224,000__DIN 7979D-M60000000000000
    500.007 to 0.018M6 × 1 mmRockwell C5224,000__DIN 7979D-M60000000000000
    600.007 to 0.018M6 × 1 mmRockwell C5224,000__DIN 7979D-M60000000000000
     
    18-8 Stainless Steel
     
    4 mm Diameter
    160.004 to 0.015M3 × 0.5 mmRockwell C18101,000PassivatedDIN 7979C-M60000000000000
    200.004 to 0.015M3 × 0.5 mmRockwell C18101,000PassivatedDIN 7979C-M60000000000000
     
    5 mm Diameter
    100.004 to 0.015M3 × 0.5 mmRockwell C18101,000PassivatedDIN 7979C-M60000000000000
    240.004 to 0.015M3 × 0.5 mmRockwell C18101,000PassivatedDIN 7979C-M60000000000000
     
    6 mm Diameter
    160.004 to 0.015M4 × 0.7 mmRockwell C18101,000PassivatedDIN 7979C-M60000000000000
    240.004 to 0.015M4 × 0.7 mmRockwell C18101,000PassivatedDIN 7979C-M600000000000000
    300.004 to 0.015M4 × 0.7 mmRockwell C18101,000PassivatedDIN 7979C-M600000000000000
    360.004 to 0.015M4 × 0.7 mmRockwell C18101,000PassivatedDIN 7979C-M600000000000000
    400.004 to 0.015M4 × 0.7 mmRockwell C18101,000PassivatedDIN 7979C-M600000000000000
     
    8 mm Diameter
    160.006 to 0.015M5 × 0.8 mmRockwell C18101,000PassivatedDIN 7979C-M600000000000000
    200.006 to 0.015M5 × 0.8 mmRockwell C18101,000PassivatedDIN 7979C-M600000000000000
    240.006 to 0.015M5 × 0.8 mmRockwell C18101,000PassivatedDIN 7979C-M600000000000000
    300.006 to 0.015M5 × 0.8 mmRockwell C18101,000PassivatedDIN 7979C-M600000000000000
    400.006 to 0.015M5 × 0.8 mmRockwell C18101,000PassivatedDIN 7979C-M600000000000000
    500.006 to 0.015M5 × 0.8 mmRockwell C18101,000PassivatedDIN 7979C-M600000000000000
    600.006 to 0.015M5 × 0.8 mmRockwell C18101,000PassivatedDIN 7979C-M600000000000000
    1000.006 to 0.015M5 × 0.8 mmRockwell C18101,000PassivatedDIN 7979C-M600000000000000
     
    10 mm Diameter
    200.006 to 0.015M6 × 1 mmRockwell C18101,000PassivatedDIN 7979C-M600000000000000
    400.006 to 0.015M6 × 1 mmRockwell C18101,000PassivatedDIN 7979C-M600000000000000
    600.006 to 0.015M6 × 1 mmRockwell C18101,000PassivatedDIN 7979C-M600000000000000
    800.006 to 0.015M6 × 1 mmRockwell C18101,000PassivatedDIN 7979C-M600000000000000
     
    12 mm Diameter
    240.007 to 0.018M6 × 1 mmRockwell C18101,000PassivatedDIN 7979C-M600000000000000
    400.007 to 0.018M6 × 1 mmRockwell C18101,000PassivatedDIN 7979C-M600000000000000
    500.007 to 0.018M6 × 1 mmRockwell C18101,000PassivatedDIN 7979C-M600000000000000
    800.007 to 0.018M6 × 1 mmRockwell C18101,000PassivatedDIN 7979C-M600000000000000
     
    back to top