Made of 18-8 stainless steel, these rivet nuts withstand water, mild chemicals, and outdoor conditions better than zinc-plated steel nuts. A ribbed body grips surrounding material to hold them in place, keeping them from spinning as you tighten screws.

Originally designed for Formula 1 racecars, these titanium rivet nuts are the best choice when you need a high strength-to-weight ratio—they're 40% lighter than steel nuts.

Our most twist-resistant round rivet nuts, these have both a ribbed body and wedges under the flange that bite into material to prevent spinning when tightening a screw. With a thick body for heavy duty applications, they match the strength of Grade 5 and Class 8 screws.

Ideal for wet and outdoor environments, these rivet nuts are made of stainless steel. Their hex-shaped body provides the highest twist resistance of any rivet nut.

Made of stainless steel, these rivet nuts hold up better outdoors than zinc-plated steel rivet nuts.

To grip all layers of a sandwich panel—the top, core, and bottom—these rivet nuts have a two-piece construction.

Everything you need to add threads to sheet metal in low-clearance areas. Along with low-profile rivet nuts, these kits include mandrels and an installation tool.

These low-profile rivet nuts are one-third the weight of steel and have mild corrosion resistance.

With a durable plastic seal around a closed body, these rivet nuts add threads to sheet metal without letting water or dust pass through.

Install a rivet nut with only a screw—no special installation tool required.

A nonconductive rubber coating insulates the nut from electricity, seals out moisture, and damps vibration.

Threads float inside the nut so you can install a screw at a slight angle to align with off-center parts. They’re also known as Riv-Float nuts.

These rivet nuts have a smooth body and fit in smaller holes than twist-resistant rivet nuts. Assortments include rivet nuts, mandrels, nosepieces, and a plier-style installation tool.