Metric Roll Pins | McMaster-Carr

Filter by

System of Measurement

Diameter

Length

Shaft Type

Hole Diameter

Material

Wall Thickness

Specifications Met

Performance

Double Shear Breaking Strength

Passivation

Minimum Hardness

Hardness

DFARS Specialty Metals

RoHS

Export Control Classification Number (ECCN)

REACH

Finish

Number of Pieces

Container Features

541 Products

Shaft Type

Slotted

Squeeze and insert into tight holes to hold parts in place with tension

420 products

Coiled

The best for parts exposed to vibration and shock

121 products

Shaft Type

Tooth Slotted

Interlocking teeth resist pulling forces to keep pins from wiggling out of holes

0 products

Performance

Corrosion Resistant

Resist rust in wet and outdoor environments

150 products

Slotted Spring Pins

End View

Squeeze these pins into holes and they expand slightly, creating tension to hold parts in place. They are often used as hinge pins and as fasteners for springs and power transmission components. An alternative to dowel pins, they're lighter in weight with a hollow center and don’t need a precise hole. Also known as roll pins.

Spring Steel—These pins won't deform from stress and vibration. Although they're stronger than stainless steel, they're best for dry environments since moisture will cause them to rust.

Corrosion-Resistant 18-8 Stainless Steel—The choice for wet and outdoor environments, these pins resist rusting. They are strong enough to join most components but won't withstand extreme stress and vibration as well as steel.

	Lg., mm	For Hole Dia., mm	Wall Thk., mm	Double Shear Breaking Strength, lbf	Min. Hardness	Specs. Met	Pkg. Qty.		Pkg.
Spring Steel







				1 mm Diameter

				4	1	0.2	150	Rockwell C42	DIN 1481, ISO 8752	100	000000000	00000


				6	1	0.2	150	Rockwell C42	ISO 8752	100	000000000	0000
				8	1	0.2	150	Rockwell C42	ISO 8752	100	000000000	0000




						1.5 mm Diameter

						4	1.5 to 1.6	0.3	350	Rockwell C42	DIN 1481, ISO 8752	100	000000000	0000


						5	1.5 to 1.6	0.3	350	Rockwell C42	DIN 1481, ISO 8752	100	000000000	0000
						6	1.5 to 1.6	0.3	350	Rockwell C42	DIN 1481, ISO 8752	100	000000000	00000
						8	1.5 to 1.6	0.3	350	Rockwell C42	DIN 1481, ISO 8752	100	000000000	00000
						10	1.5 to 1.6	0.3	350	Rockwell C42	ISO 8752	100	000000000	00000
						12	1.5 to 1.6	0.3	350	Rockwell C42	DIN 1481, ISO 8752	100	000000000	00000




								2 mm Diameter

								4	2	0.2	330	Rockwell C42	DIN 7346, ISO 13337	50	000000000	00000


								4	2 to 2.1	0.4	600	Rockwell C42	ISO 8752	200	000000000	00000
								5	2	0.2	330	Rockwell C42	DIN 7346, ISO 13337	50	000000000	00000
								5	2 to 2.1	0.4	600	Rockwell C42	ISO 8752	200	000000000	00000
								6	2	0.2	330	Rockwell C42	DIN 7346, ISO 13337	100	000000000	00000
								6	2 to 2.1	0.4	600	Rockwell C42	ISO 8752	200	000000000	00000
								8	2	0.2	330	Rockwell C42	DIN 7346, ISO 13337	100	000000000	00000
								8	2 to 2.1	0.4	600	Rockwell C42	ISO 8752	200	000000000	00000
								10	2	0.2	330	Rockwell C42	DIN 7346, ISO 13337	100	000000000	00000
								10	2 to 2.1	0.4	600	Rockwell C42	ISO 8752	200	000000000	00000
								12	2	0.2	330	Rockwell C42	DIN 7346, ISO 13337	100	000000000	00000


								12	2 to 2.1	0.4	600	Rockwell C42	ISO 8752	200	000000000	00000
								14	2	0.2	330	Rockwell C42	DIN 7346, ISO 13337	100	000000000	0000
								14	2 to 2.1	0.4	600	Rockwell C42	ISO 8752	200	000000000	00000
								16	2	0.2	330	Rockwell C42	DIN 7346, ISO 13337	100	000000000	00000
								16	2 to 2.1	0.4	600	Rockwell C42	ISO 8752	200	000000000	00000
								18	2	0.2	330	Rockwell C42	DIN 7346, ISO 13337	100	000000000	00000
								18	2 to 2.1	0.4	600	Rockwell C42	ISO 8752	200	000000000	00000
								20	2	0.2	330	Rockwell C42	DIN 7346, ISO 13337	100	000000000	0000
								20	2 to 2.1	0.4	600	Rockwell C42	ISO 8752	100	000000000	00000
								22	2	0.2	330	Rockwell C42	DIN 7346, ISO 13337	50	000000000	0000


								22	2 to 2.1	0.4	600	Rockwell C42	ISO 8752	100	000000000	0000
								24	2	0.2	330	Rockwell C42	DIN 7346, ISO 13337	100	000000000	00000
								24	2 to 2.1	0.4	600	Rockwell C42	ISO 8752	100	000000000	00000
30								2	0.2	330	Rockwell C42	DIN 7346, ISO 13337	100	000000000	00000
30	2 to 2.1							0.4	600	Rockwell C42	ISO 8752	100	000000000	00000




		2.5 mm Diameter

		5	2.5					0.25	530	Rockwell C42	DIN 7346, ISO 13337	50	000000000	0000


		6	2.5					0.25	530	Rockwell C42	DIN 7346, ISO 13337	100	000000000	00000
		8	2.5					0.25	530	Rockwell C42	DIN 7346, ISO 13337	100	000000000	00000
		10	2.5					0.25	530	Rockwell C42	DIN 7346, ISO 13337	100	000000000	00000
		10	2.5 to 2.6					0.5	950	Rockwell C42	DIN 1481, ISO 8752	100	000000000	0000
		12	2.5					0.25	530	Rockwell C42	DIN 7346, ISO 13337	100	000000000	00000
		14	2.5					0.25	530	Rockwell C42	DIN 7346, ISO 13337	50	000000000	0000
		14	2.5 to 2.6	0.5				950	Rockwell C42	ISO 8752	100	000000000	0000
		16	2.5	0.25	530			Rockwell C42	DIN 7346, ISO 13337	50	000000000	00000
		18	2.5	0.25	530			Rockwell C42	DIN 7346, ISO 13337	50	000000000	00000
		20	2.5	0.25	530			Rockwell C42	DIN 7346, ISO 13337	50	000000000	0000


		20	2.5 to 2.6	0.5	950			Rockwell C42	ISO 8752	100	000000000	00000
		24	2.5	0.25	530			Rockwell C42	DIN 7346, ISO 13337	50	000000000	0000
		24	2.5 to 2.6	0.5	950			Rockwell C42	ISO 8752	100	000000000	0000
		26	2.5	0.25	530			Rockwell C42	DIN 7346, ISO 13337	50	000000000	00000
		30	2.5	0.25	530			Rockwell C42	DIN 7346, ISO 13337	50	000000000	00000
		30	2.5 to 2.6	0.5	950			Rockwell C42	ISO 8752	100	000000000	00000




				3 mm Diameter

				4	3	0.3	780	Rockwell C42	DIN 7346, ISO 13337	100	000000000	00000


				4	3 to 3.65	0.6	1,400	Rockwell C42	ISO 8752	200	000000000	00000
				5	3	0.3	780	Rockwell C42	DIN 7346, ISO 13337	50	000000000	0000
				6	3	0.3	780	Rockwell C42	DIN 7346, ISO 13337	100	000000000	0000
				6	3 to 3.1	0.6	1,400	Rockwell C42	ISO 8752	200	000000000	00000
				8	3	0.3	780	Rockwell C42	DIN 7346, ISO 13337	100	000000000	00000
				8	3 to 3.1	0.6	1,400	Rockwell C42	ISO 8752	200	000000000	00000
				10	3	0.3	780	Rockwell C42	DIN 7346, ISO 13337	100	000000000	00000
				10	3 to 3.1	0.6	1,400	Rockwell C42	ISO 8752	200	000000000	00000
				12	3	0.3	780	Rockwell C42	DIN 7346, ISO 13337	100	000000000	00000
				12	3 to 3.1	0.6	1,400	Rockwell C42	ISO 8752	200	000000000	00000


				14	3	0.3	780	Rockwell C42	DIN 7346, ISO 13337	100	000000000	00000
				14	3 to 3.1	0.6	1,400	Rockwell C42	ISO 8752	200	000000000	00000
				16	3	0.3	780	Rockwell C42	DIN 7346, ISO 13337	100	000000000	00000
				16	3 to 3.1	0.6	1,400	Rockwell C42	ISO 8752	200	000000000	00000
				18	3	0.3	780	Rockwell C42	DIN 7346, ISO 13337	100	000000000	00000
				18	3 to 3.1	0.6	1,400	Rockwell C42	ISO 8752	200	000000000	00000
				20	3 to 3.1	0.6	1,400	Rockwell C42	ISO 8752	200	000000000	00000
				22	3	0.3	780	Rockwell C42	DIN 7346, ISO 13337	50	000000000	00000
				22	3 to 3.1	0.6	1,400	Rockwell C42	ISO 8752	100	000000000	0000
				24	3	0.3	780	Rockwell C42	DIN 7346, ISO 13337	50	000000000	0000


				24	3 to 3.1	0.6	1,400	Rockwell C42	ISO 8752	100	000000000	00000
				26	3	0.3	780	Rockwell C42	DIN 7346, ISO 13337	50	000000000	00000
				26	3 to 3.1	0.6	1,400	Rockwell C42	ISO 8752	100	000000000	00000
				28	3	0.3	780	Rockwell C42	DIN 7346, ISO 13337	50	000000000	00000
				28	3 to 3.1	0.6	1,400	Rockwell C42	ISO 8752	100	000000000	0000
				30	3	0.3	780	Rockwell C42	DIN 7346, ISO 13337	50	000000000	00000
30				3 to 3.1	0.6	1,400	Rockwell C42	ISO 8752	100	000000000	00000
32	3			0.3	780	Rockwell C42	DIN 7346, ISO 13337	50	000000000	0000
36	3			0.3	780	Rockwell C42	DIN 7346, ISO 13337	50	000000000	00000
36	3 to 3.1			0.6	1,400	Rockwell C42	DIN 1481, ISO 8752	100	000000000	00000


40	3			0.3	780	Rockwell C42	DIN 7346, ISO 13337	50	000000000	00000
40	3 to 3.1			0.6	1,400	Rockwell C42	ISO 8752	100	000000000	00000




				3.5 mm Diameter

				10	3.5 to 3.65	0.8	2,000	Rockwell C42	ISO 8752	100	000000000	0000


				20	3.5 to 3.65	0.8	2,000	Rockwell C42	ISO 8752	100	000000000	00000
				30	3.5 to 3.65	0.8	2,000	Rockwell C42	ISO 8752	100	000000000	00000




						4 mm Diameter

						6	4	0.5	1,700	Rockwell C42	DIN 7346, ISO 13337	100	000000000	00000


		6	4 to 4.2			0.8	2,500	Rockwell C42	ISO 8752	100	000000000	00000
		8	4			0.5	1,700	Rockwell C42	DIN 7346, ISO 13337	50	000000000	0000
		8	4 to 4.2			0.8	2,500	Rockwell C42	ISO 8752	100	000000000	0000
		10	4			0.5	1,700	Rockwell C42	DIN 7346, ISO 13337	50	000000000	0000
		10	4 to 4.2			0.8	2,500	Rockwell C42	ISO 8752	100	000000000	00000
		12	4			0.5	1,700	Rockwell C42	DIN 7346, ISO 13337	50	000000000	0000
		12	4 to 4.2			0.8	2,500	Rockwell C42	ISO 8752	100	000000000	00000
		14	4			0.5	1,700	Rockwell C42	DIN 7346, ISO 13337	50	000000000	0000
		14	4 to 4.2			0.8	2,500	Rockwell C42	ISO 8752	100	000000000	00000
		16	4			0.5	1,700	Rockwell C42	DIN 7346, ISO 13337	50	000000000	0000


		16	4 to 4.2			0.8	2,500	Rockwell C42	ISO 8752	100	000000000	00000
		18	4			0.5	1,700	Rockwell C42	DIN 7346, ISO 13337	50	000000000	0000
		18	4 to 4.2			0.8	2,500	Rockwell C42	ISO 8752	100	000000000	00000
		20	4			0.5	1,700	Rockwell C42	DIN 7346, ISO 13337	50	000000000	0000
		20	4 to 4.2			0.8	2,500	Rockwell C42	ISO 8752	100	000000000	00000
		22	4			0.5	1,700	Rockwell C42	DIN 7346, ISO 13337	50	000000000	00000
		22	4 to 4.2			0.8	2,500	Rockwell C42	ISO 8752	100	000000000	00000
		24	4			0.5	1,700	Rockwell C42	DIN 7346, ISO 13337	50	000000000	00000
		24	4 to 4.2			0.8	2,500	Rockwell C42	ISO 8752	100	000000000	00000
		26	4			0.5	1,700	Rockwell C42	DIN 7346, ISO 13337	50	000000000	00000


		26	4 to 4.2			0.8	2,500	Rockwell C42	ISO 8752	100	000000000	00000
		28	4			0.5	1,700	Rockwell C42	DIN 7346, ISO 13337	50	000000000	00000
		30	4			0.5	1,700	Rockwell C42	DIN 7346, ISO 13337	50	000000000	00000
		30	4 to 4.2			0.8	2,500	Rockwell C42	ISO 8752	100	000000000	00000
		32	4			0.5	1,700	Rockwell C42	DIN 7346, ISO 13337	50	000000000	00000
		32	4 to 4.2			0.8	2,500	Rockwell C42	ISO 8752	100	000000000	00000
		36	4			0.5	1,700	Rockwell C42	DIN 7346, ISO 13337	25	000000000	00000
		36	4 to 4.2			0.8	2,500	Rockwell C42	ISO 8752	100	000000000	00000
		40	4			0.5	1,700	Rockwell C42	DIN 7346, ISO 13337	25	000000000	0000
		40	4 to 4.2			0.8	2,500	Rockwell C42	ISO 8752	100	000000000	00000


		45	4			0.5	1,700	Rockwell C42	DIN 7346, ISO 13337	25	000000000	0000
		45	4 to 4.2			0.8	2,500	Rockwell C42	ISO 8752	100	000000000	00000
		50	4			0.5	1,700	Rockwell C42	DIN 7346, ISO 13337	25	000000000	00000
		50	4 to 4.2			0.8	2,500	Rockwell C42	ISO 8752	50	000000000	00000




						5 mm Diameter

5						5	0.5	2,300	Rockwell C42	DIN 7346, ISO 13337	50	000000000	00000


6	5					0.5	2,300	Rockwell C42	DIN 7346, ISO 13337	50	000000000	00000
8	5					0.5	2,300	Rockwell C42	DIN 7346, ISO 13337	50	000000000	0000
10	5 to 5.2					1	3,900	Rockwell C42	DIN 1481, ISO 8752	100	000000000	00000
12	5					0.5	2,300	Rockwell C42	DIN 7346, ISO 13337	25	000000000	0000
12	5 to 5.2					1	3,900	Rockwell C42	ISO 8752	100	000000000	00000
14	5					0.5	2,300	Rockwell C42	DIN 7346, ISO 13337	50	000000000	00000
14	5 to 5.2					1	3,900	Rockwell C42	ISO 8752	100	000000000	00000
16	5					0.5	2,300	Rockwell C42	DIN 7346, ISO 13337	50	000000000	00000
16	5 to 5.2			1		3,900	Rockwell C42	ISO 8752	100	000000000	00000
18	5			0.5	2,300	Rockwell C42	DIN 7346, ISO 13337	50	000000000	00000


18	5 to 5.2			1	3,900	Rockwell C42	ISO 8752	100	000000000	00000
20	5			0.5	2,300	Rockwell C42	DIN 7346, ISO 13337	50	000000000	00000
20	5 to 5.2			1	3,900	Rockwell C42	ISO 8752	100	000000000	00000
22	5			0.5	2,300	Rockwell C42	DIN 7346, ISO 13337	50	000000000	00000
22	5 to 5.2			1	3,900	Rockwell C42	ISO 8752	100	000000000	00000
24	5			0.5	2,300	Rockwell C42	DIN 7346, ISO 13337	50	000000000	00000
24	5 to 5.2			1	3,900	Rockwell C42	ISO 8752	100	000000000	00000
26	5			0.5	2,300	Rockwell C42	DIN 7346, ISO 13337	50	000000000	00000
26	5 to 5.2			1	3,900	Rockwell C42	ISO 8752	100	000000000	00000
28	5			0.5	2,300	Rockwell C42	DIN 7346, ISO 13337	50	000000000	00000


28	5 to 5.2			1	3,900	Rockwell C42	ISO 8752	100	000000000	00000
30	5			0.5	2,300	Rockwell C42	DIN 7346, ISO 13337	50	000000000	00000
30	5 to 5.2			1	3,900	Rockwell C42	ISO 8752	100	000000000	00000
32	5			0.5	2,300	Rockwell C42	DIN 7346, ISO 13337	25	000000000	0000
32	5 to 5.2			1	3,900	Rockwell C42	ISO 8752	100	000000000	00000
36	5			0.5	2,300	Rockwell C42	DIN 7346, ISO 13337	25	000000000	0000
36	5 to 5.2			1	3,900	Rockwell C42	ISO 8752	100	000000000	00000
40	5			0.5	2,300	Rockwell C42	DIN 7346, ISO 13337	25	000000000	0000
40	5 to 5.2			1	3,900	Rockwell C42	ISO 8752	100	000000000	00000
45	5			0.5	2,300	Rockwell C42	DIN 7346, ISO 13337	25	000000000	0000


45	5 to 5.2			1	3,900	Rockwell C42	ISO 8752	100	000000000	00000
50	5			0.5	2,300	Rockwell C42	DIN 7346, ISO 13337	25	000000000	00000
50	5 to 5.2			1	3,900	Rockwell C42	ISO 8752	50	000000000	00000
60	5			0.5	2,300	Rockwell C42	DIN 7346, ISO 13337	25	000000000	00000
70	5			0.5	2,300	Rockwell C42	DIN 7346, ISO 13337	10	000000000	0000
80	5			0.5	2,300	Rockwell C42	DIN 7346, ISO 13337	10	000000000	0000




				6 mm Diameter

				10	6	0.75	4,000	Rockwell C42	DIN 7346, ISO 13337	25	000000000	0000


				12	6	0.75	4,000	Rockwell C42	DIN 7346, ISO 13337	50	000000000	00000
				12	6 to 6.2	1.2	5,800	Rockwell C42	ISO 8752	100	000000000	00000
				14	6	0.75	4,000	Rockwell C42	DIN 7346, ISO 13337	50	000000000	00000
				14	6 to 6.2	1.2	5,800	Rockwell C42	ISO 8752	100	000000000	00000
				16	6	0.75	4,000	Rockwell C42	DIN 7346, ISO 13337	50	000000000	00000
				16	6 to 6.2	1.2	5,800	Rockwell C42	ISO 8752	100	000000000	00000
		18		6	0.75	4,000	Rockwell C42	DIN 7346, ISO 13337	50	000000000	00000
		20	6	0.75	4,000	Rockwell C42	DIN 7346, ISO 13337	25	000000000	0000
		20	6 to 6.2	1.2	5,800	Rockwell C42	ISO 8752	100	000000000	00000
		22	6	0.75	4,000	Rockwell C42	DIN 7346, ISO 13337	25	000000000	0000


		24	6	0.75	4,000	Rockwell C42	DIN 7346, ISO 13337	25	000000000	00000
		24	6 to 6.2	1.2	5,800	Rockwell C42	ISO 8752	100	000000000	00000
		26	6	0.75	4,000	Rockwell C42	DIN 7346, ISO 13337	25	000000000	00000
		26	6 to 6.2	1.2	5,800	Rockwell C42	ISO 8752	100	000000000	00000
		28	6	0.75	4,000	Rockwell C42	DIN 7346, ISO 13337	25	000000000	00000
		30	6	0.75	4,000	Rockwell C42	DIN 7346, ISO 13337	25	000000000	00000
		30	6 to 6.2	1.2	5,800	Rockwell C42	ISO 8752	50	000000000	00000
		32	6	0.75	4,000	Rockwell C42	DIN 7346, ISO 13337	25	000000000	00000
		36	6	0.75	4,000	Rockwell C42	DIN 7346, ISO 13337	25	000000000	00000
		36	6 to 6.2	1.2	5,800	Rockwell C42	ISO 8752	50	000000000	00000


		40	6	0.75	4,000	Rockwell C42	DIN 7346, ISO 13337	25	000000000	00000
		40	6 to 6.2	1.2	5,800	Rockwell C42	ISO 8752	50	000000000	00000
		45	6	0.75	4,000	Rockwell C42	DIN 7346, ISO 13337	10	000000000	0000
		45	6 to 6.2	1.2	5,800	Rockwell C42	ISO 8752	50	000000000	00000
		50	6	0.75	4,000	Rockwell C42	DIN 7346, ISO 13337	10	000000000	0000
		50	6 to 6.2	1.2	5,800	Rockwell C42	ISO 8752	50	000000000	00000
		55	6	0.75	4,000	Rockwell C42	DIN 7346, ISO 13337	10	000000000	0000
		60	6	0.75	4,000	Rockwell C42	DIN 7346, ISO 13337	10	000000000	0000
		60	6 to 6.2	1.2	5,800	Rockwell C42	ISO 8752	25	000000000	0000
		70	6	0.75	4,000	Rockwell C42	DIN 7346, ISO 13337	10	000000000	00000


		80	6	0.75	4,000	Rockwell C42	DIN 7346, ISO 13337	10	000000000	0000
		100	6	0.75	4,000	Rockwell C42	DIN 7346, ISO 13337	10	000000000	00000
		100	6 to 6.2	1.2	5,800	Rockwell C42	DIN 1481, ISO 8752	10	000000000	00000




				8 mm Diameter

				10	8	0.75	5,300	Rockwell C42	DIN 7346, ISO 13337	25	000000000	00000


				12	8	0.75	5,300	Rockwell C42	DIN 7346, ISO 13337	25	000000000	00000
				14	8	0.75	5,300	Rockwell C42	DIN 7346, ISO 13337	25	000000000	00000
				16	8	0.75	5,300	Rockwell C42	DIN 7346, ISO 13337	25	000000000	00000
				18	8	0.75	5,300	Rockwell C42	DIN 7346, ISO 13337	25	000000000	00000
				20	8	0.75	5,300	Rockwell C42	DIN 7346, ISO 13337	25	000000000	00000
				22	8	0.75	5,300	Rockwell C42	DIN 7346, ISO 13337	25	000000000	00000
				22	8 to 8.25	1.5	9,600	Rockwell C42	ISO 8752	50	000000000	00000
				24	8	0.75	5,300	Rockwell C42	DIN 7346, ISO 13337	10	000000000	0000
				26	8	0.75	5,300	Rockwell C42	DIN 7346, ISO 13337	25	000000000	00000
26				8 to 8.25	1.5	9,600	Rockwell C42	ISO 8752	50	000000000	00000


28	8			0.75	5,300	Rockwell C42	DIN 7346, ISO 13337	25	000000000	00000
30	8			0.75	5,300	Rockwell C42	DIN 7346, ISO 13337	10	000000000	0000
30	8 to 8.25			1.5	9,600	Rockwell C42	ISO 8752	50	000000000	00000
32	8			0.75	5,300	Rockwell C42	DIN 7346, ISO 13337	10	000000000	0000
36	8			0.75	5,300	Rockwell C42	DIN 7346, ISO 13337	10	000000000	0000
40	8			0.75	5,300	Rockwell C42	DIN 7346, ISO 13337	10	000000000	0000
40	8 to 8.25			1.5	9,600	Rockwell C42	ISO 8752	50	000000000	00000
45	8			0.75	5,300	Rockwell C42	DIN 7346, ISO 13337	10	000000000	0000
50	8			0.75	5,300	Rockwell C42	DIN 7346, ISO 13337	10	000000000	00000
50	8 to 8.25			1.5	9,600	Rockwell C42	ISO 8752	25	000000000	00000


55	8			0.75	5,300	Rockwell C42	DIN 7346, ISO 13337	10	000000000	0000
55	8 to 8.25			1.5	9,600	Rockwell C42	ISO 8752	25	000000000	00000
60	8			0.75	5,300	Rockwell C42	DIN 7346, ISO 13337	10	000000000	00000
60	8 to 8.25			1.5	9,600	Rockwell C42	ISO 8752	25	000000000	00000
65	8			0.75	5,300	Rockwell C42	DIN 7346, ISO 13337	5	000000000	0000
70	8			0.75	5,300	Rockwell C42	DIN 7346, ISO 13337	10	000000000	00000
80	8			0.75	5,300	Rockwell C42	DIN 7346, ISO 13337	10	000000000	00000
100	8			0.75	5,300	Rockwell C42	DIN 7346, ISO 13337	5	000000000	00000
100	8 to 8.25			1.5	9,600	Rockwell C42	DIN 1481, ISO 8752	5	000000000	0000




				10 mm Diameter

				10	10	1	5,300	Rockwell C42	DIN 7346, ISO 13337	10	000000000	0000


				12	10	1	5,300	Rockwell C42	DIN 7346, ISO 13337	10	000000000	0000
				14	10	1	5,300	Rockwell C42	DIN 7346, ISO 13337	10	000000000	0000
				16	10	1	5,300	Rockwell C42	DIN 7346, ISO 13337	10	000000000	0000
				20	10	1	5,300	Rockwell C42	DIN 7346, ISO 13337	10	000000000	0000
				22	10	1	5,300	Rockwell C42	DIN 7346, ISO 13337	10	000000000	00000
				24	10	1	5,300	Rockwell C42	DIN 7346, ISO 13337	10	000000000	0000
				24	10 to 10.3	2	15,700	Rockwell C42	ISO 8752	25	000000000	00000
				26	10	1	5,300	Rockwell C42	DIN 7346, ISO 13337	10	000000000	0000
				30	10	1	5,300	Rockwell C42	DIN 7346, ISO 13337	10	000000000	0000
				30	10 to 10.3	2	15,700	Rockwell C42	ISO 8752	25	000000000	00000


				36	10	1	5,300	Rockwell C42	DIN 7346, ISO 13337	10	000000000	00000
				36	10 to 10.3	2	15,700	Rockwell C42	ISO 8752	25	000000000	00000
				40	10	1	5,300	Rockwell C42	DIN 7346, ISO 13337	10	000000000	00000
		40		10 to 10.3	2	15,700	Rockwell C42	ISO 8752	25	000000000	00000
		45	10	1	5,300	Rockwell C42	DIN 7346, ISO 13337	10	000000000	00000
		50	10	1	5,300	Rockwell C42	DIN 7346, ISO 13337	5	000000000	0000
		50	10 to 10.3	2	15,700	Rockwell C42	ISO 8752	25	000000000	00000
		60	10	1	5,300	Rockwell C42	DIN 7346, ISO 13337	5	000000000	0000
		60	10 to 10.3	2	15,700	Rockwell C42	ISO 8752	10	000000000	00000
		70	10	1	5,300	Rockwell C42	DIN 7346, ISO 13337	5	000000000	0000


		80	10	1	5,300	Rockwell C42	DIN 7346, ISO 13337	5	000000000	00000
		80	10 to 10.3	2	15,700	Rockwell C42	ISO 8752	10	000000000	00000
		90	10	1	5,300	Rockwell C42	DIN 7346, ISO 13337	5	000000000	00000
		100	10	1	5,300	Rockwell C42	DIN 7346, ISO 13337	1	000000000	0000
		100	10 to 10.3	2	15,700	Rockwell C42	DIN 1481, ISO 8752	5	000000000	00000




				12 mm Diameter

				10	12	1	10,700	Rockwell C42	DIN 7346, ISO 13337	10	000000000	0000


				16	12	1	10,700	Rockwell C42	DIN 7346, ISO 13337	10	000000000	0000
				20	12	1	10,700	Rockwell C42	DIN 7346, ISO 13337	10	000000000	00000
				24	12	1	10,700	Rockwell C42	DIN 7346, ISO 13337	10	000000000	00000
				26	12	1	10,700	Rockwell C42	DIN 7346, ISO 13337	5	000000000	0000
				28	12	1	10,700	Rockwell C42	DIN 7346, ISO 13337	5	000000000	0000
				30	12	1	10,700	Rockwell C42	DIN 7346, ISO 13337	5	000000000	0000
				30	12 to 12.3	2.5	23,000	Rockwell C42	ISO 8752	5	000000000	00000
				32	12	1	10,700	Rockwell C42	DIN 7346, ISO 13337	5	000000000	0000
				36	12	1	10,700	Rockwell C42	DIN 7346, ISO 13337	5	000000000	00000
				40	12	1	10,700	Rockwell C42	DIN 7346, ISO 13337	5	000000000	00000


				40	12 to 12.3	2.5	23,000	Rockwell C42	ISO 8752	10	000000000	00000
				45	12	1	10,700	Rockwell C42	DIN 7346, ISO 13337	5	000000000	00000
				50	12	1	10,700	Rockwell C42	DIN 7346, ISO 13337	5	000000000	00000
				50	12 to 12.3	2.5	23,000	Rockwell C42	ISO 8752	5	000000000	00000
				55	12	1	10,700	Rockwell C42	DIN 7346, ISO 13337	5	000000000	00000
				60	12	1	10,700	Rockwell C42	DIN 7346, ISO 13337	1	000000000	0000
				60	12 to 12.3	2.5	23,000	Rockwell C42	ISO 8752	5	000000000	00000
65				12	1	10,700	Rockwell C42	DIN 7346, ISO 13337	5	000000000	00000
70	12			1	10,700	Rockwell C42	DIN 7346, ISO 13337	5	000000000	00000
80	12			1	10,700	Rockwell C42	DIN 7346, ISO 13337	5	000000000	00000


100	12			1	10,700	Rockwell C42	DIN 7346, ISO 13337	1	000000000	0000




				13 mm Diameter

				10	13	1.2	14,800	Rockwell C42	DIN 7346, ISO 13337	5	000000000	00000


				12	13	1.2	14,800	Rockwell C42	DIN 7346, ISO 13337	1	000000000	0000
				14	13	1.2	14,800	Rockwell C42	DIN 7346, ISO 13337	5	000000000	00000
				16	13	1.2	14,800	Rockwell C42	DIN 7346, ISO 13337	5	000000000	0000
				20	13	1.2	14,800	Rockwell C42	DIN 7346, ISO 13337	5	000000000	00000
				22	13	1.2	14,800	Rockwell C42	DIN 7346, ISO 13337	5	000000000	00000
				24	13	1.2	14,800	Rockwell C42	DIN 7346, ISO 13337	5	000000000	00000
				26	13	1.2	14,800	Rockwell C42	DIN 7346, ISO 13337	5	000000000	00000
				28	13	1.2	14,800	Rockwell C42	DIN 7346, ISO 13337	5	000000000	00000
				30	13	1.2	14,800	Rockwell C42	DIN 7346, ISO 13337	5	000000000	0000
				36	13	1.2	14,800	Rockwell C42	DIN 7346, ISO 13337	5	000000000	00000


				40	13	1.2	14,800	Rockwell C42	DIN 7346, ISO 13337	1	000000000	0000
				50	13	1.2	14,800	Rockwell C42	DIN 7346, ISO 13337	5	000000000	00000
				70	13	1.2	14,800	Rockwell C42	DIN 7346, ISO 13337	1	000000000	0000




						16 mm Diameter

						10	16	1.5	22,000	Rockwell C42	DIN 7346, ISO 13337	10	000000000	00000


		12	16			1.5	22,000	Rockwell C42	DIN 7346, ISO 13337	5	000000000	0000
		14	16			1.5	22,000	Rockwell C42	DIN 7346, ISO 13337	1	000000000	0000
		16	16			1.5	22,000	Rockwell C42	DIN 7346, ISO 13337	1	000000000	0000
		18	16			1.5	22,000	Rockwell C42	DIN 7346, ISO 13337	1	000000000	0000
		20	16			1.5	22,000	Rockwell C42	DIN 7346, ISO 13337	5	000000000	00000
		22	16			1.5	22,000	Rockwell C42	DIN 7346, ISO 13337	1	000000000	0000
		24	16			1.5	22,000	Rockwell C42	DIN 7346, ISO 13337	1	000000000	0000
		26	16			1.5	22,000	Rockwell C42	DIN 7346, ISO 13337	1	000000000	0000
		28	16			1.5	22,000	Rockwell C42	DIN 7346, ISO 13337	5	000000000	00000
		30	16			1.5	22,000	Rockwell C42	DIN 7346, ISO 13337	1	000000000	0000


		32	16			1.5	22,000	Rockwell C42	DIN 7346, ISO 13337	1	000000000	0000
		36	16			1.5	22,000	Rockwell C42	DIN 7346, ISO 13337	1	000000000	0000
		40	16			1.5	22,000	Rockwell C42	DIN 7346, ISO 13337	1	000000000	0000
		45	16			1.5	22,000	Rockwell C42	DIN 7346, ISO 13337	1	000000000	0000
		50	16			1.5	22,000	Rockwell C42	DIN 7346, ISO 13337	1	000000000	0000
		55	16			1.5	22,000	Rockwell C42	DIN 7346, ISO 13337	1	000000000	0000
		60	16			1.5	22,000	Rockwell C42	DIN 7346, ISO 13337	1	000000000	0000
		70	16			1.5	22,000	Rockwell C42	DIN 7346, ISO 13337	1	000000000	0000
		120	16			1.5	22,000	Rockwell C42	DIN 7346, ISO 13337	1	000000000	00000




						21 mm Diameter

						30	21	2	37,700	Rockwell C42	DIN 7346, ISO 13337	1	000000000	0000


						36	21	2	37,700	Rockwell C42	DIN 7346, ISO 13337	1	000000000	00000
						40	21	2	37,700	Rockwell C42	DIN 7346, ISO 13337	1	000000000	00000
						45	21	2	37,700	Rockwell C42	DIN 7346, ISO 13337	1	000000000	00000
50						21	2	37,700	Rockwell C42	DIN 7346, ISO 13337	1	000000000	00000
60	21					2	37,700	Rockwell C42	DIN 7346, ISO 13337	1	000000000	00000
85	21					2	37,700	Rockwell C42	DIN 7346, ISO 13337	1	000000000	00000


Corrosion-Resistant 18-8 Stainless Steel







								1 mm Diameter

								4	1	0.2	Not Rated	Not Rated	ISO 8752	100	000000000	0000


								6	1	0.2	Not Rated	Not Rated	ISO 8752	100	000000000	00000
								8	1	0.2	Not Rated	Not Rated	ISO 8752	100	000000000	00000




										1.5 mm Diameter

				4	1.5 to 1.6					0.3	Not Rated	Not Rated	ISO 8752	100	000000000	0000


				5	1.5 to 1.6					0.3	Not Rated	Not Rated	ISO 8752	100	000000000	0000
				6	1.5 to 1.6					0.3	Not Rated	Not Rated	ISO 8752	25	000000000	0000
				8	1.5 to 1.6					0.3	Not Rated	Not Rated	ISO 8752	25	000000000	0000
				10	1.5 to 1.6					0.3	Not Rated	Not Rated	ISO 8752	25	000000000	0000
				12	1.5 to 1.6					0.3	Not Rated	Not Rated	ISO 8752	25	000000000	0000




										2 mm Diameter

										4	2 to 2.1	0.4	Not Rated	Not Rated	ISO 8752	100	000000000	0000


										5	2 to 2.1	0.4	Not Rated	Not Rated	ISO 8752	100	000000000	0000
										6	2 to 2.1	0.4	Not Rated	Not Rated	DIN 1481, ISO 8752	25	000000000	0000
										8	2 to 2.1	0.4	Not Rated	Not Rated	DIN 1481, ISO 8752	25	000000000	0000
										10	2 to 2.1	0.4	Not Rated	Not Rated	DIN 1481, ISO 8752	25	000000000	0000
										12	2 to 2.1	0.4	Not Rated	Not Rated	DIN 1481, ISO 8752	25	000000000	0000
										14	2 to 2.1	0.4	Not Rated	Not Rated	DIN 1481, ISO 8752	25	000000000	0000
										16	2 to 2.1	0.4	Not Rated	Not Rated	DIN 1481, ISO 8752	25	000000000	0000
										18	2 to 2.1	0.4	Not Rated	Not Rated	DIN 1481, ISO 8752	25	000000000	0000
										20	2 to 2.1	0.4	Not Rated	Not Rated	DIN 1481, ISO 8752	25	000000000	0000
										22	2 to 2.1	0.4	Not Rated	Not Rated	ISO 8752	25	000000000	0000


		24								2 to 2.1	0.4	Not Rated	Not Rated	DIN 1481, ISO 8752	25	000000000	0000
		30	2 to 2.1							0.4	Not Rated	Not Rated	DIN 1481, ISO 8752	25	000000000	0000




										2.5 mm Diameter

										10	2.5 to 2.6	0.5	Not Rated	Not Rated	ISO 8752	25	000000000	0000


										14	2.5 to 2.6	0.5	Not Rated	Not Rated	ISO 8752	25	000000000	00000
										20	2.5 to 2.6	0.5	Not Rated	Not Rated	DIN 1481, ISO 8752	25	000000000	0000
										30	2.5 to 2.6	0.5	Not Rated	Not Rated	DIN 1481, ISO 8752	25	000000000	0000




										3 mm Diameter

						4				3 to 3.65	0.6	Not Rated	Not Rated	ISO 8752	100	000000000	0000


						6	3 to 3.1			0.6	Not Rated	Not Rated	ISO 8752	100	000000000	0000
						8	3 to 3.1			0.6	Not Rated	Not Rated	DIN 1481, ISO 8752	25	000000000	0000
						10	3 to 3.1			0.6	Not Rated	Not Rated	DIN 1481, ISO 8752	25	000000000	0000
						12	3 to 3.1			0.6	Not Rated	Not Rated	DIN 1481, ISO 8752	25	000000000	0000
						14	3 to 3.1			0.6	Not Rated	Not Rated	DIN 1481, ISO 8752	25	000000000	0000
						16	3 to 3.1			0.6	Not Rated	Not Rated	DIN 1481, ISO 8752	25	000000000	0000
						18	3 to 3.1			0.6	Not Rated	Not Rated	DIN 1481, ISO 8752	25	000000000	0000
						20	3 to 3.1			0.6	Not Rated	Not Rated	DIN 1481, ISO 8752	10	000000000	0000
						22	3 to 3.1	0.6		Not Rated	Not Rated	ISO 8752	10	000000000	0000
						24	3 to 3.1	0.6	Not Rated	Not Rated	DIN 1481, ISO 8752	10	000000000	0000


						26	3 to 3.1	0.6	Not Rated	Not Rated	DIN 1481, ISO 8752	10	000000000	0000
						28	3 to 3.1	0.6	Not Rated	Not Rated	DIN 1481, ISO 8752	10	000000000	0000
						30	3 to 3.1	0.6	Not Rated	Not Rated	DIN 1481, ISO 8752	10	000000000	0000
						40	3 to 3.1	0.6	Not Rated	Not Rated	DIN 1481, ISO 8752	10	000000000	0000




								3.5 mm Diameter

				10				3.5 to 3.65	0.75	Not Rated	Not Rated	DIN 1481, ISO 8752	50	000000000	00000


				20	3.5 to 3.6			0.7	Not Rated	Not Rated	ISO 8752	50	000000000	0000
				30	3.5 to 3.6			0.7	Not Rated	Not Rated	ISO 8752	50	000000000	0000




								4 mm Diameter

								8	4 to 4.2	0.8	Not Rated	Not Rated	ISO 8752	10	000000000	0000


								10	4 to 4.2	0.8	Not Rated	Not Rated	DIN 1481, ISO 8752	10	000000000	0000
								12	4 to 4.2	0.8	Not Rated	Not Rated	DIN 1481, ISO 8752	10	000000000	0000
								14	4 to 4.2	0.8	Not Rated	Not Rated	DIN 1481, ISO 8752	10	000000000	0000
								16	4 to 4.2	0.8	Not Rated	Not Rated	DIN 1481, ISO 8752	10	000000000	0000
								18	4 to 4.2	0.8	Not Rated	Not Rated	DIN 1481, ISO 8752	10	000000000	0000
								20	4 to 4.2	0.8	Not Rated	Not Rated	DIN 1481, ISO 8752	10	000000000	0000
								22	4 to 4.2	0.8	Not Rated	Not Rated	ISO 8752	10	000000000	0000
								24	4 to 4.2	0.8	Not Rated	Not Rated	DIN 1481, ISO 8752	10	000000000	0000
								26	4 to 4.2	0.8	Not Rated	Not Rated	DIN 1481, ISO 8752	10	000000000	0000
		30						4 to 4.2	0.8	Not Rated	Not Rated	DIN 1481, ISO 8752	10	000000000	0000


		32	4 to 4.2					0.8	Not Rated	Not Rated	DIN 1481, ISO 8752	10	000000000	0000
		36	4 to 4.2					0.8	Not Rated	Not Rated	DIN 1481, ISO 8752	10	000000000	0000
		40	4 to 4.2					0.8	Not Rated	Not Rated	DIN 1481, ISO 8752	10	000000000	0000
		45	4 to 4.2					0.8	Not Rated	Not Rated	DIN 1481, ISO 8752	10	000000000	0000
		50	4 to 4.2					0.8	Not Rated	Not Rated	ISO 8752	5	000000000	00000




5 mm Diameter

10	5 to 5.2							1	Not Rated	Not Rated	DIN 1481, ISO 8752	10	000000000	0000


12	5 to 5.2							1	Not Rated	Not Rated	DIN 1481, ISO 8752	10	000000000	0000
14	5 to 5.2							1	Not Rated	Not Rated	ISO 8752	10	000000000	0000
16	5 to 5.2							1	Not Rated	Not Rated	DIN 1481, ISO 8752	10	000000000	0000
18	5 to 5.2							1	Not Rated	Not Rated	ISO 8752	10	000000000	0000
20	5 to 5.2							1	Not Rated	Not Rated	DIN 1481, ISO 8752	10	000000000	0000
22	5 to 5.2							1	Not Rated	Not Rated	DIN 1481, ISO 8752	10	000000000	0000
24	5 to 5.2							1	Not Rated	Not Rated	DIN 1481, ISO 8752	10	000000000	0000
26	5 to 5.2							1	Not Rated	Not Rated	DIN 1481, ISO 8752	10	000000000	0000
28	5 to 5.2							1	Not Rated	Not Rated	ISO 8752	10	000000000	0000
30	5 to 5.2							1	Not Rated	Not Rated	DIN 1481, ISO 8752	10	000000000	0000


32	5 to 5.2							1	Not Rated	Not Rated	ISO 8752	10	000000000	0000
36	5 to 5.2							1	Not Rated	Not Rated	DIN 1481, ISO 8752	10	000000000	0000
40	5 to 5.2							1	Not Rated	Not Rated	DIN 1481, ISO 8752	10	000000000	0000
45	5 to 5.2							1	Not Rated	Not Rated	ISO 8752	10	000000000	0000
50	5 to 5.2							1	Not Rated	Not Rated	DIN 1481, ISO 8752	10	000000000	0000




						6 mm Diameter

						12	6 to 6.2	1.2	Not Rated	Not Rated	DIN 1481, ISO 8752	10	000000000	0000


						14	6 to 6.2	1.2	Not Rated	Not Rated	ISO 8752	10	000000000	0000
						16	6 to 6.2	1.2	Not Rated	Not Rated	DIN 1481, ISO 8752	10	000000000	0000
						20	6 to 6.2	1.2	Not Rated	Not Rated	DIN 1481, ISO 8752	10	000000000	0000
						24	6 to 6.2	1.2	Not Rated	Not Rated	DIN 1481, ISO 8752	10	000000000	0000
						26	6 to 6.2	1.2	Not Rated	Not Rated	DIN 1481, ISO 8752	10	000000000	0000
						30	6 to 6.2	1.2	Not Rated	Not Rated	DIN 1481, ISO 8752	10	000000000	0000
				36		6 to 6.2	1.2	Not Rated	Not Rated	DIN 1481, ISO 8752	10	000000000	00000
				40	6 to 6.2	1.2	Not Rated	Not Rated	DIN 1481, ISO 8752	10	000000000	0000
				45	6 to 6.2	1.2	Not Rated	Not Rated	DIN 1481, ISO 8752	10	000000000	00000
				50	6 to 6.2	1.2	Not Rated	Not Rated	DIN 1481, ISO 8752	5	000000000	0000


				60	6 to 6.2	1.2	Not Rated	Not Rated	DIN 1481, ISO 8752	5	000000000	0000




						8 mm Diameter

						22	8 to 8.25	1.5	Not Rated	Not Rated	DIN 1481, ISO 8752	10	000000000	00000


						26	8 to 8.25	1.5	Not Rated	Not Rated	DIN 1481, ISO 8752	10	000000000	00000
						30	8 to 8.25	1.5	Not Rated	Not Rated	DIN 1481, ISO 8752	10	000000000	0000
						40	8 to 8.25	1.5	Not Rated	Not Rated	DIN 1481, ISO 8752	5	000000000	0000
						50	8 to 8.25	1.5	Not Rated	Not Rated	DIN 1481, ISO 8752	1	000000000	0000
						55	8 to 8.25	1.5	Not Rated	Not Rated	DIN 1481, ISO 8752	1	000000000	0000
						60	8 to 8.25	1.5	Not Rated	Not Rated	DIN 1481, ISO 8752	1	000000000	0000
						100	8 to 8.25	1.5	Not Rated	Not Rated	DIN 1481, ISO 8752	1	000000000	0000




			10 mm Diameter

			24				10 to 10.3	2	Not Rated	Not Rated	DIN 1481, ISO 8752	1	000000000	0000


			30				10 to 10.3	2	Not Rated	Not Rated	DIN 1481, ISO 8752	1	000000000	0000
			36				10 to 10.3	2	Not Rated	Not Rated	DIN 1481, ISO 8752	1	000000000	0000
			40				10 to 10.3	2	Not Rated	Not Rated	DIN 1481, ISO 8752	1	000000000	0000
			50				10 to 10.3	2	Not Rated	Not Rated	DIN 1481, ISO 8752	1	000000000	0000
			60				10 to 10.3	2	Not Rated	Not Rated	DIN 1481, ISO 8752	1	000000000	0000
			80				10 to 10.3	2	Not Rated	Not Rated	DIN 1481, ISO 8752	1	000000000	0000
			100				10 to 10.3	2	Not Rated	Not Rated	DIN 1481, ISO 8752	1	000000000	0000

Coiled Spring Pins


	End View

The best spring pins for joining parts exposed to vibration and shock. They're often used in power transmission, automation, and other assemblies with constant motion and sudden starts and stops. Because of their spiral shape, they flex to conform to holes that aren’t perfectly round.

Spring Steel—These pins won't deform from stress and vibration. Although they're stronger than stainless steel, they're best for dry environments since moisture will cause them to rust.

	Lg., mm	For Hole Dia., mm	Double Shear Breaking Strength, lbf	Min. Hardness	Specs. Met	Pkg. Qty.		Pkg.
Spring Steel







				1 mm Diameter

				4	1.000 to 1.040	130	Rockwell C43	DIN 7343, ISO 8750	50	000000000	000000


				6	1.000 to 1.040	130	Rockwell C43	DIN 7343, ISO 8750	50	000000000	00000




						1.5 mm Diameter

						6	1.500 to 1.600	320	Rockwell C43	ASME B18.8.3M, DIN 7343, ISO 8750	50	000000000	00000


						8	1.500 to 1.600	320	Rockwell C43	ASME B18.8.3M, DIN 7343, ISO 8750	50	000000000	00000
						10	1.600 to 1.700	175	Rockwell C43	ASME B18.8.3M, DIN 7343, ISO 8750	50	000000000	00000
						12	1.500 to 1.600	320	Rockwell C43	ASME B18.8.3M, DIN 7343, ISO 8750	50	000000000	00000




								2 mm Diameter

								6	2.000 to 2.100	550	Rockwell C43	ASME B18.8.3M, DIN 7343, ISO 8750	50	000000000	0000


								8	2.000 to 2.100	550	Rockwell C41	DIN 7343, ISO 8750	50	000000000	00000
								10	2.000 to 2.100	550	Rockwell C43	ISO 8750	50	000000000	00000
								12	2.000 to 2.100	550	Rockwell C41	DIN 7343, ISO 8750	50	000000000	0000
								14	2.000 to 2.100	550	Rockwell C43	ASME B18.8.3M, DIN 7343, ISO 8750	50	000000000	0000
								16	2.000 to 2.100	550	Rockwell C43	ASME B18.8.3M, DIN 7343, ISO 8750	50	000000000	0000
								18	2.000 to 2.100	550	Rockwell C41	DIN 7343, ISO 8750	50	000000000	0000




										2.5 mm Diameter

										8	2.500 to 2.600	850	Rockwell C43	DIN 7343, ISO 8750	50	000000000	0000


										10	2.500 to 2.600	850	Rockwell C43	ASME B18.8.3M, DIN 7343, ISO 8750	50	000000000	0000
										12	2.500 to 2.600	850	Rockwell C43	DIN 7343, ISO 8750	50	000000000	0000
										14	2.600 to 2.700	850	Rockwell C43	ASME B18.8.3M, DIN 7343, ISO 8750	50	000000000	00000
										16	2.500 to 2.600	850	Rockwell C43	DIN 7343, ISO 8750	50	000000000	00000
										20	2.500 to 2.600	850	Rockwell C43	DIN 7343, ISO 8750	50	000000000	00000




												3 mm Diameter

												8	3.000 to 3.100	1,200	Rockwell C43	ISO 8750	50	000000000	00000


												10	3.000 to 3.100	1,200	Rockwell C43	DIN 7343, ISO 8750	50	000000000	00000
12												3.000 to 3.100	1,200	Rockwell C43	ISO 8750	50	000000000	00000
14	3.000 to 3.100											1,200	Rockwell C43	DIN 7343, ISO 8750	50	000000000	00000
16	3.000 to 3.100											1,200	Rockwell C43	DIN 7343, ISO 8750	50	000000000	00000
18	3.000 to 3.100											1,200	Rockwell C43	ISO 8750	25	000000000	00000
20	3.000 to 3.100											1,200	Rockwell C43	DIN 7343, ISO 8750	25	000000000	0000
26	3.000 to 3.100	1,200										Rockwell C41	DIN 7343, ISO 8750	25	000000000	0000
30	3.000 to 3.100	1,200	Rockwell C43									DIN 7343, ISO 8750	25	000000000	0000




		3.5 mm Diameter

		10	3.500 to 3.600									1,600	Rockwell C43	ASME B18.8.3M, DIN 7343, ISO 8750	25	000000000	0000


		20	3.500 to 3.600	1,600								Rockwell C43	ASME B18.8.3M, DIN 7343, ISO 8750	25	000000000	0000
		30	3.500 to 3.600	1,600	Rockwell C43							ASME B18.8.3M, DIN 7343, ISO 8750	25	000000000	00000




				4 mm Diameter

				10	4.000 to 4.100							2,100	Rockwell C41	DIN 7343, ISO 8750	25	000000000	0000


				12	4.000 to 4.100							2,100	Rockwell C43	DIN 7343, ISO 8750	25	000000000	0000
				14	4.000 to 4.100							2,100	Rockwell C43	ISO 8750	25	000000000	00000
				16	4.000 to 4.100	2,100						Rockwell C43	ASME B18.8.3M, DIN 7343, ISO 8750	25	000000000	0000
				18	4.000 to 4.100	2,100	Rockwell C43					ASME B18.8.3M, DIN 7343, ISO 8750	25	000000000	0000
				20	4.000 to 4.200	2,100	Rockwell C41					DIN 7343, ISO 8750	25	000000000	00000
				24	4.000 to 4.100	2,100	Rockwell C43					ISO 8750	25	000000000	00000
				30	4.000 to 4.100	2,100	Rockwell C43					DIN 7343, ISO 8750	25	000000000	0000
				35	4.000 to 4.100	2,100	Rockwell C43					DIN 7343, ISO 8750	25	000000000	00000
				40	4.000 to 4.100	2,100	Rockwell C43					ASME B18.8.3M, DIN 7343, ISO 8750	10	000000000	0000
				50	4.000 to 4.100	2,100	Rockwell C43					ASME B18.8.3M, DIN 7343, ISO 8750	10	000000000	0000




						5 mm Diameter

						10	5.000 to 5.100					3,300	Rockwell C43	ASME B18.8.3M, DIN 7343, ISO 8750	25	000000000	00000


						12	5.000 to 5.100	3,300	Rockwell C43			DIN 7343, ISO 8750	25	000000000	0000
						16	5.000 to 5.100	3,300	Rockwell C43			ASME B18.8.3M, DIN 7343, ISO 8750	25	000000000	0000
						20	5.000 to 5.100	3,300	Rockwell C43			DIN 7343, ISO 8750	25	000000000	00000
						24	5.000 to 5.100	3,300	Rockwell C43			ASME B18.8.3M, DIN 7343, ISO 8750	25	000000000	00000
						30	5.000 to 5.100	3,300	Rockwell C43			DIN 7343, ISO 8750	25	000000000	00000
						35	5.000 to 5.100	3,300	Rockwell C43			DIN 7343, ISO 8750	25	000000000	00000
						40	5.000 to 5.100	3,300	Rockwell C43			DIN 7343, ISO 8750	10	000000000	0000
						50	5.000 to 5.100	3,300	Rockwell C43			ASME B18.8.3M, DIN 7343, ISO 8750	10	000000000	00000
						60	5.000 to 5.100	3,300	Rockwell C43			ASME B18.8.3M, DIN 7343, ISO 8750	10	000000000	00000




								6 mm Diameter

								16	6.000 to 6.100	4,900	Rockwell C43	DIN 7343, ISO 8750	25	000000000	00000


								20	6.000 to 6.100	4,900	Rockwell C43	DIN 7343, ISO 8750	25	000000000	00000
								24	6.000 to 6.100	4,900	Rockwell C43	DIN 7343, ISO 8750	25	000000000	00000
								30	6.000 to 6.100	4,900	Rockwell C43	DIN 7343, ISO 8750	10	000000000	0000
								35	6.000 to 6.100	4,900	Rockwell C43	DIN 7343, ISO 8750	5	000000000	0000
								40	6.000 to 6.100	4,900	Rockwell C43	DIN 7343, ISO 8750	5	000000000	0000
								50	6.200 to 6.500	4,900	Rockwell C43	ASME B18.8.3M, DIN 7343, ISO 8750	5	000000000	0000
								60	6.000 to 6.100	4,900	Rockwell C43	ASME B18.8.3M, DIN 7343, ISO 8750	5	000000000	0000




								8 mm Diameter

								20	8.000 to 8.300	8,700	Rockwell C41	DIN 7343, ISO 8750	10	000000000	00000


								26	8.000 to 8.300	8,700	Rockwell C41	DIN 7343, ISO 8750	5	000000000	0000
								30	8.000 to 8.200	8,700	Rockwell C43	DIN 7343, ISO 8750	5	000000000	0000
								35	8.000 to 8.200	8,700	Rockwell C43	ISO 8750	5	000000000	00000
								40	8.000 to 8.200	8,700	Rockwell C43	DIN 7343, ISO 8750	5	000000000	0000
		45						8.000 to 8.200	8,700	Rockwell C43	ISO 8750	5	000000000	00000
		50	8.000 to 8.100					8,700	Rockwell C43	ASME B18.8.3M, DIN 7343, ISO 8750	5	000000000	0000
		60	8.000 to 8.100					8,700	Rockwell C43	ASME B18.8.3M, DIN 7343, ISO 8750	5	000000000	00000




								10 mm Diameter

								24	10.000 to 10.100	13,900	Rockwell C43	ASME B18.8.3M, ISO 8748	1	000000000	0000


								40	10.000 to 10.100	13,900	Rockwell C43	ASME B18.8.3M, DIN 7343, ISO 8750	1	000000000	0000
								50	10.300 to 10.800	13,900	Rockwell C43	ASME B18.8.3M, DIN 7343, ISO 8750	1	000000000	0000
								60	10.000 to 10.100	13,900	Rockwell C43	ASME B18.8.3M, DIN 7343, ISO 8750	1	000000000	0000
								70	10.000 to 10.100	13,900	Rockwell C43	ASME B18.8.3M, DIN 7343, ISO 8750	1	000000000	0000
								80	10.000 to 10.100	13,900	Rockwell C43	ASME B18.8.3M, DIN 7343, ISO 8750	1	000000000	0000
								100	10.000 to 10.100	13,900	Rockwell C43	ASME B18.8.3M, DIN 7343, ISO 8750	1	000000000	0000




								12 mm Diameter

								60	12.000 to 12.100	20,000	Rockwell C43	ASME B18.8.3M, DIN 7343, ISO 8750	1	000000000	0000


								Corrosion-Resistant 18-8 Stainless Steel







												1 mm Diameter

						4						1.000 to 1.040	100	Not Rated	DIN 7343, ISO 8750	50	000000000	00000


						6	1.000 to 1.040					100	Not Rated	DIN 7343, ISO 8750	50	000000000	00000
						10	1.000 to 1.040					100	Not Rated	DIN 7343, ISO 8750	50	000000000	00000




												1.5 mm Diameter

												6	1.500 to 1.600	200	Not Rated	ASME B18.8.3M, DIN 7343, ISO 8750	25	000000000	0000


												8	1.500 to 1.600	200	Not Rated	ASME B18.8.3M, DIN 7343, ISO 8750	25	000000000	0000
												10	1.500 to 1.600	200	Not Rated	ASME B18.8.3M, DIN 7343, ISO 8750	25	000000000	0000
12												1.500 to 1.600	200	Not Rated	ASME B18.8.3M, DIN 7343, ISO 8750	25	000000000	0000




												2 mm Diameter

												6	2.000 to 2.100	400	Not Rated	ASME B18.8.3M, DIN 7343, ISO 8750	50	000000000	00000


												8	2.000 to 2.100	400	Not Rated	DIN 7343, ISO 8750	50	000000000	00000
												10	2.000 to 2.100	400	Not Rated	DIN 7343, ISO 8750	25	000000000	00000
												12	2.000 to 2.100	400	Not Rated	DIN 7343, ISO 8750	25	000000000	0000
												18	2.000 to 2.100	400	Not Rated	DIN 7343, ISO 8750	25	000000000	00000




												2.5 mm Diameter

												8	2.500 to 2.600	650	Not Rated	DIN 7343, ISO 8750	25	000000000	00000


												10	2.500 to 2.600	650	Not Rated	ASME B18.8.3M, DIN 7343, ISO 8750	25	000000000	00000
												12	2.500 to 2.600	650	Not Rated	DIN 7343, ISO 8750	25	000000000	00000
												14	2.500 to 2.600	650	Not Rated	ASME B18.8.3M, DIN 7343, ISO 8750	25	000000000	00000
												16	2.500 to 2.600	650	Not Rated	DIN 7343, ISO 8750	25	000000000	00000
												20	2.500 to 2.600	650	Not Rated	DIN 7343, ISO 8750	10	000000000	0000




					3 mm Diameter

					8								3.000 to 3.100	900	Not Rated	DIN 7343, ISO 8750	25	000000000	00000


					10								3.000 to 3.100	900	Not Rated	DIN 7343, ISO 8750	25	000000000	00000
					12								3.000 to 3.100	900	Not Rated	DIN 7343, ISO 8750	25	000000000	00000
					14								3.000 to 3.100	900	Not Rated	DIN 7343, ISO 8750	25	000000000	00000
					16			3.000 to 3.100					900	Not Rated	DIN 7343, ISO 8750	25	000000000	00000
					18			3.000 to 3.100	900				Not Rated	DIN 7343, ISO 8750	25	000000000	00000
					20			3.000 to 3.100	900				Not Rated	DIN 7343, ISO 8750	25	000000000	00000
					30			3.000 to 3.100	900				Not Rated	DIN 7343, ISO 8750	10	000000000	00000




									4 mm Diameter

									12	4.000 to 4.100	1,700		Not Rated	DIN 7343, ISO 8750	10	000000000	0000


									14	4.000 to 4.100	1,700		Not Rated	DIN 7343, ISO 8750	10	000000000	00000
									18	4.200 to 4.400	1,700		Not Rated	ASME B18.8.3M, DIN 7343, ISO 8750	10	000000000	0000
									20	4.000 to 4.100	1,700		Not Rated	ASME B18.8.3M, DIN 7343, ISO 8750	10	000000000	0000
						24			4.000 to 4.100	1,700	Not Rated		DIN 7343, ISO 8750	10	000000000	00000
						30	4.000 to 4.100		1,700	Not Rated	ASME B18.8.3M, DIN 7343, ISO 8750		10	000000000	00000
						35	4.000 to 4.100		1,700	Not Rated	DIN 7343, ISO 8750		10	000000000	00000




									5 mm Diameter

									12	5.000 to 5.100	2,500		Not Rated	DIN 7343, ISO 8750	10	000000000	0000


20	5.000 to 5.100								2,500	Not Rated	DIN 7343, ISO 8750		10	000000000	00000
30	5.000 to 5.100								2,500	Not Rated	DIN 7343, ISO 8750		5	000000000	00000
35	5.000 to 5.100								2,500	Not Rated	DIN 7343, ISO 8750		5	000000000	00000
40	5.000 to 5.100								2,500	Not Rated	DIN 7343, ISO 8750		5	000000000	00000




									6 mm Diameter

									16	6.000 to 6.100	3,700		Not Rated	DIN 7343, ISO 8750	5	000000000	0000


		20	6.000 to 6.100						3,700	Not Rated	DIN 7343, ISO 8750		5	000000000	0000
		24	6.000 to 6.100						3,700	Not Rated	DIN 7343, ISO 8750		5	000000000	00000
		30	6.000 to 6.100						3,700	Not Rated	DIN 7343, ISO 8750		5	000000000	00000
		35	6.000 to 6.100						3,700	Not Rated	DIN 7343, ISO 8750		5	000000000	00000
		40	6.000 to 6.100						3,700	Not Rated	DIN 7343, ISO 8750		5	000000000	00000

Slotted Spring Pin Assortments

Keep a range of sizes on hand to secure a variety of parts. Squeeze these pins into holes and they expand slightly, creating tension to stay in place. An alternative to dowel pins, they're lighter in weight with a hollow center and don’t need a precise hole. Also known as roll pins.

Spring Steel—These pins won't deform from stress and vibration. Although they're stronger than stainless steel, they're best for dry environments since moisture will cause them to rust.

Zinc-Plated Spring Steel—These pins withstand occasional exposure to moisture. However, since friction from moving parts can wear away the finish, they're not ideal for wet environments. While not nearly as corrosion resistant as stainless steel, they are stronger and won’t deform under stress.

	No. of Pieces	Container Type	Specs. Met		Each
Spring Steel



	2 mm to 6 mm Dia.	520	Plastic Box	DIN 1481	000000000	000000


	Zinc-Plated Spring Steel



			2 mm to 6 mm Dia.	520	Plastic Box	ISO 8752	000000000	000000


			Corrosion-Resistant 18-8 Stainless Steel



					2 mm to 6 mm Dia.	520	Plastic Box	ISO 8752	000000000	000000

Coiled Spring Pin Assortments

The best spring pins for shock and vibration, these assortments secure a variety of parts. They're often used in power transmission, automation, and other assemblies with constant motion and sudden starts and stops. Pins have a spiral shape that flexes to conform to holes that aren’t perfectly round.

	No. of Pieces	Container Type		Each
Corrosion-Resistant 18-8 Stainless Steel



	1.5 mm to 8 mm Dia.	230	Plastic Box	000000000	0000000