Metric Sheet Metal Screws

Filter by

System of Measurement

Thread Type

Screw Size

Length

Tip Type

Fastener Head Type

Drive Style

For Use In

Thread Size

Head Diameter

Tapping Screw Type

Rounded Head Style

Tapping Method

Material

Head Height

Threading

Flat Head Profile

Thread Pitch

Drive Size

Finish

Specifications Met

RoHS

U.S.–Mexico–Canada Agreement (USMCA) Qualifying

Yes

REACH

Compliant

Not Compliant

Export Control Classification Number (ECCN)

EAR99

DFARS Specialty Metals

265 Products

About Tapping Screws

Compare drilling, pointed, thread-forming, and thread-cutting tips to find the best choice for your material.

Fastener Head Type

Rounded

The most common head type creates a finished look

98 products

Hex

For high-torque fastening with a nutdriver or socket

39 products

Fastener Head Type

Flat

Sit neatly in countersunk holes for a flush finish

65 products

Flanged

Distribute pressure evenly to prevent damaging material

39 products

Strip-Resistant Steel Torx Rounded Head Screws for Sheet Metal

Threads with double spirals grab thin-gauge sheet metal for a secure hold without damaging the material. As these screws tap, the threads engage along the whole length to prevent overtightening and ruining the threads. Also known as Fastite, they have a triangular shank and may have a slightly different diameter than standard screws. The deep six-lobe recess (also called a star drive) withstands more torque than slotted, Phillips, and hex drives.

Length is measured from under the head.

Zinc-Plated Steel—A common choice for areas with occasional exposure to moisture.

		Head, mm
	Lg., mm	Dia.	Ht.	Tapping Screw Type	Drive Size	Drill Bit Size	Shank Cross Section	Pkg. Qty.		Pkg.
Zinc-Plated Steel







				M2 Screw Size

				6	4.2	1.8	CA	T6	1.5 mm	Tri-Lobe	25	92750A556	000000




						M2.5 Screw Size

						6	4.9	2.3	CA	T8	48 Ga.	Tri-Lobe	25	92750A611	00000


						8	4.9	2.3	CA	T8	48 Ga.	Tri-Lobe	25	92750A615	00000




								M3 Screw Size

								4	5.6	2.6	CA	T10	42 Ga.	Tri-Lobe	25	92750A652	00000


								6	5.6	2.6	CA	T10	42 Ga.	Tri-Lobe	25	92750A656	00000
								8	5.6	2.6	CA	T10	42 Ga.	Tri-Lobe	25	92750A661	00000
								10	5.6	2.6	CA	T10	42 Ga.	Tri-Lobe	25	92750A665	00000




										M4 Screw Size

										6	8	3.3	CA	T20	1/8"	Tri-Lobe	25	92750A712	00000


										8	8	3.3	CA	T20	1/8"	Tri-Lobe	25	92750A716	00000
										10	8	3.3	CA	T20	1/8"	Tri-Lobe	25	92750A720	00000

Stainless Steel Phillips Rounded Head Screws for Sheet Metal

Our most popular sheet metal screws also resist rust. Their pointed tip starts a hole in sheets up to 0.025" thick, but for thicker material you’ll need to drill first. The Phillips drive handles enough torque to keep drivers from slipping and the rounded head creates a finished look.

Length is measured from under the head.

18-8 Stainless Steel—The choice for wet and outdoor environments, these screws resist rust. However, they won't hold up to the harsh chemicals that 316 stainless steel can.

		Head, mm
	Lg., mm	Dia.	Ht.	Tapping Screw Type	Drive Size	Specs. Met	Pkg. Qty.		Pkg.
18-8 Stainless Steel







				M2.2 Screw Size

				6.5	4.2	1.8	C	No. 1	DIN 7981	50	94997A125	000000


				9.5	4.2	1.8	C	No. 1	DIN 7981	50	94997A130	00000
				13	4.2	1.8	C	No. 1	DIN 7981	50	92470A351	00000
				16	4.2	1.8	C	No. 1	DIN 7981	50	92470A352	00000




						M2.9 Screw Size

						6.5	5.6	2.2	C	No. 1	DIN 7981	50	94997A225	00000


						9.5	5.6	2.2	C	No. 1	DIN 7981	50	94997A250	00000
						13	5.6	2.2	C	No. 1	DIN 7981	50	94997A275	00000
						16	5.6	2.2	C	No. 1	DIN 7981	25	92470A353	00000
						19	5.6	2.2	C	No. 1	DIN 7981	25	92470A354	00000
						22	5.6	2.2	C	No. 1	DIN 7981	25	92470A355	00000
						25	5.6	2.2	C	No. 1	DIN 7981	25	92470A356	00000




								M3.5 Screw Size

								9.5	6.9	2.6	C	No. 2	DIN 7981	25	92470A357	00000


								13	6.9	2.6	C	No. 2	DIN 7981	25	94997A300	00000
								16	6.9	2.6	C	No. 2	DIN 7981	25	92470A358	00000
								19	6.9	2.6	C	No. 2	DIN 7981	25	94997A325	00000
								22	6.9	2.6	C	No. 2	DIN 7981	25	92470A359	00000
								25	6.9	2.6	C	No. 2	DIN 7981	25	94997A350	00000
								32	6.9	2.6	C	No. 2	DIN 7981	25	92470A361	00000




										M3.9 Screw Size

										9.5	7.5	2.8	C	No. 2	DIN 7981	25	92470A362	00000


										13	7.5	2.8	C	No. 2	DIN 7981	25	94997A400	00000
										16	7.5	2.8	C	No. 2	DIN 7981	25	92470A363	00000
										19	7.5	2.8	C	No. 2	DIN 7981	25	94997A425	00000
										22	7.5	2.8	C	No. 2	DIN 7981	25	92470A364	00000
										25	7.5	2.8	C	No. 2	DIN 7981	25	94997A450	00000




												M4.2 Screw Size

9.5	8.2											3.1	C	No. 2	DIN 7981	25	92470A365	00000


13	8.2											3.1	C	No. 2	DIN 7981	25	92470A366	00000
16	8.2	3.1										C	No. 2	DIN 7981	25	92470A367	00000
19	8.2	3.1	C									No. 2	DIN 7981	25	92470A368	00000
22	8.2	3.1	C									No. 2	DIN 7981	25	92470A369	00000
25	8.2	3.1	C									No. 2	DIN 7981	25	92470A371	00000
32	8.2	3.1	C									No. 2	DIN 7981	25	92470A372	00000
38	8.2	3.1	C									No. 2	DIN 7981	10	92470A373	00000




		M4.8 Screw Size

		13	9.5									3.6	C	No. 2	DIN 7981	10	92470A374	0000


		16	9.5	3.6	C							No. 2	DIN 7981	10	92470A375	0000
		19	9.5	3.6	C							No. 2	DIN 7981	10	92470A376	0000
		22	9.5	3.6	C							No. 2	DIN 7981	10	92470A377	00000
		25	9.5	3.6	C							No. 2	DIN 7981	10	92470A378	00000
		32	9.5	3.6	C							No. 2	DIN 7981	10	92470A379	00000
		38	9.5	3.6	C							No. 2	DIN 7981	10	92470A381	00000




				M5.5 Screw Size

				13	10.8							4	C	No. 3	DIN 7981	10	92470A382	00000


				16	10.8	4	C					No. 3	DIN 7981	10	92470A383	00000
				19	10.8	4	C					No. 3	DIN 7981	10	92470A384	00000
				25	10.8	4	C					No. 3	DIN 7981	10	92470A385	00000
				32	10.8	4	C					No. 3	DIN 7981	10	92470A386	00000
				38	10.8	4	C					No. 3	DIN 7981	10	92470A387	00000

Stainless Steel Phillips Flat Head Screws for Sheet Metal

These corrosion-resistant screws fasten trim, brackets, and other objects with countersunk holes to sheet metal. The head is flat on top and beveled underneath to sit flush with surfaces. Screws have a pointed tip that starts a hole in sheets up to 0.025" thick, but for thicker material you’ll need to drill first. The Phillips drive handles enough torque to keep drivers from slipping.

Length is measured from the top of the head.

18-8 Stainless Steel—The choice for wet and outdoor environments, these screws resist rust. However, they won't hold up to the harsh chemicals that 316 stainless steel can.

		Head, mm
	Lg., mm	Dia.	Ht.	Tapping Screw Type	Drive Size	Countersink Angle	Flat Head Profile	Specs. Met	Pkg. Qty.		Pkg.
18-8 Stainless Steel







				M2.2 Screw Size

				6.5	4.2	1.8	C	No. 1	80°	Standard	DIN 7982 Type C	50	95844A610	000000


				9.5	4.2	1.8	C	No. 1	80°	Standard	DIN 7982 Type C	50	95844A611	00000
				13	4.2	1.8	C	No. 1	80°	Standard	DIN 7982 Type C	50	95844A612	00000
				16	4.2	1.8	C	No. 1	80°	Standard	DIN 7982 Type C	50	95844A613	00000
				19	4.2	1.8	C	No. 1	80°	Standard	DIN 7982 Type C	25	95844A614	00000




						M2.9 Screw Size

						9.5	5.5	1.7	C	No. 1	80°	Standard	DIN 7982 Type C	50	95844A225	00000


						13	5.5	1.7	C	No. 1	80°	Standard	DIN 7982 Type C	50	95844A250	00000
						16	5.5	1.7	C	No. 1	80°	Standard	DIN 7982 Type C	50	95844A615	00000
						19	5.5	1.7	C	No. 1	80°	Standard	DIN 7982 Type C	50	95844A275	00000




								M3.5 Screw Size

								13	6.8	2.1	C	No. 2	80°	Standard	DIN 7982 Type C	25	95844A300	00000


								16	6.8	2.1	C	No. 2	80°	Standard	DIN 7982 Type C	25	95844A618	00000
								19	6.8	2.1	C	No. 2	80°	Standard	DIN 7982 Type C	25	95844A325	00000
								22	6.8	2.1	C	No. 2	80°	Standard	DIN 7982 Type C	25	95844A619	00000
								25	6.8	2.1	C	No. 2	80°	Standard	DIN 7982 Type C	25	95844A350	00000




										M3.9 Screw Size

										13	7.5	2.3	C	No. 2	80°	Standard	DIN 7982 Type C	25	95844A400	00000


										16	7.5	2.3	C	No. 2	80°	Standard	DIN 7982 Type C	25	95844A621	00000
										19	7.5	2.3	C	No. 2	80°	Standard	DIN 7982 Type C	25	95844A425	00000
										25	7.5	2.3	C	No. 2	80°	Standard	DIN 7982 Type C	25	95844A450	00000




												M4.2 Screw Size

												13	8.1	2.5	C	No. 2	80°	Standard	DIN 7982 Type C	25	95844A500	00000


												16	8.1	2.5	C	No. 2	80°	Standard	DIN 7982 Type C	25	95844A623	00000
												19	8.1	2.5	C	No. 2	80°	Standard	DIN 7982 Type C	25	95844A525	00000
22												8.1	2.5	C	No. 2	80°	Standard	DIN 7982 Type C	25	95844A624	00000
25	8.1											2.5	C	No. 2	80°	Standard	DIN 7982 Type C	10	95844A550	00000
32	8.1											2.5	C	No. 2	80°	Standard	DIN 7982 Type C	10	95844A625	00000
38	8.1											2.5	C	No. 2	80°	Standard	DIN 7982 Type C	10	95844A626	00000




		M4.8 Screw Size

		16	9.5									3.55	C	No. 2	80°	Standard	DIN 7982 Type C	10	95844A627	0000


		19	9.5									3.55	C	No. 2	80°	Standard	DIN 7982 Type C	10	95844A628	0000
		22	9.5									3.55	C	No. 2	80°	Standard	DIN 7982 Type C	10	95844A629	0000
		25	9.5									3.55	C	No. 2	80°	Standard	DIN 7982 Type C	10	95844A631	0000




				M5.5 Screw Size

				22	10.8							3.95	C	No. 3	80°	Standard	DIN 7982 Type C	10	95844A636	00000


				25	10.8							3.95	C	No. 3	80°	Standard	DIN 7982 Type C	10	95844A637	00000
				32	10.8							3.95	C	No. 3	80°	Standard	DIN 7982 Type C	5	95844A638	00000
				38	10.8							3.95	C	No. 3	80°	Standard	DIN 7982 Type C	5	95844A639	00000

Steel Flanged Hex Head Drilling Screws

Save time and effort with screws that drill and fasten in one step. The hex head gives you a firm, high-torque grip with a nutdriver or socket. Screws have a flange under the head that spreads the load to prevent crushing thin metal.

Length is measured from under the flange. Head height includes the flange.

Zinc-Plated Steel—A common choice for areas with occasional exposure to moisture.

		Drill Tip		Head, mm
	Lg., mm	Point Size	Lg., mm	Wd.	Ht.	Flange Dia., mm	Max. Drilling Thk.	Tapping Screw Type	Specs. Met	Pkg. Qty.		Pkg.
Zinc-Plated Steel







				M3.5 Screw Size

				9.5	No. 2	5.9	5.5	3.4	8.3	0.089"	BSD	DIN 7504 K, ISO 15480	100	90469A101	000000


				13	No. 2	5.9	5.5	3.4	8.3	0.089"	BSD	DIN 7504 K, ISO 15480	100	90469A102	0000
				16	No. 2	5.9	5.5	3.4	8.3	0.089"	BSD	DIN 7504 K, ISO 15480	100	90469A103	0000
				25	No. 2	5.9	5.5	3.4	8.3	0.089"	BSD	DIN 7504 K, ISO 15480	100	90469A106	0000




						M3.9 Screw Size

						13	No. 2	6.3	5.5	3.4	8.3	0.095"	BSD	DIN 7504 K, ISO 15480	100	90469A107	0000


						16	No. 2	6.3	5.5	3.4	8.3	0.095"	BSD	DIN 7504 K, ISO 15480	100	90469A108	0000
						19	No. 2	6.3	5.5	3.4	8.3	0.095"	BSD	DIN 7504 K, ISO 15480	100	90469A109	0000
						25	No. 2	6.3	5.5	3.4	8.3	0.095"	BSD	DIN 7504 K, ISO 15480	100	90469A112	0000




								M4.2 Screw Size

								13	No. 2	7.7	7	4.1	8.8	0.118"	BSD	DIN 7504 K, ISO 15480	100	90469A114	0000


								16	No. 2	7.7	7	4.1	8.8	0.118"	BSD	DIN 7504 K, ISO 15480	100	90469A115	0000
								19	No. 2	7.7	7	4.1	8.8	0.118"	BSD	DIN 7504 K, ISO 15480	100	90469A116	0000
								22	No. 2	7.7	7	4.1	8.8	0.118"	BSD	DIN 7504 K, ISO 15480	100	90469A117	00000
								25	No. 2	7.7	7	4.1	8.8	0.118"	BSD	DIN 7504 K, ISO 15480	100	90469A118	00000
								38	No. 2	7.7	7	4.1	8.8	0.118"	BSD	DIN 7504 K, ISO 15480	50	90469A121	0000




										M4.8 Screw Size

										13	No. 2	9.3	8	4.3	10.5	0.173"	BSD	DIN 7504 K, ISO 15480	100	90469A122	00000


										16	No. 2	9.3	8	4.3	10.5	0.173"	BSD	DIN 7504 K, ISO 15480	100	90469A123	00000
										19	No. 2	9.3	8	4.3	10.5	0.173"	BSD	DIN 7504 K, ISO 15480	100	90469A124	00000
										22	No. 2	9.3	8	4.3	10.5	0.173"	BSD	DIN 7504 K, ISO 15480	50	90469A125	0000
										25	No. 2	9.3	8	4.3	10.5	0.173"	BSD	DIN 7504 K, ISO 15480	50	90469A126	0000
										32	No. 2	9.3	8	4.3	10.5	0.173"	BSD	DIN 7504 K, ISO 15480	50	90469A127	0000
										50	No. 2	9.3	8	4.3	10.5	0.173"	BSD	DIN 7504 K, ISO 15480	50	90469A131	0000




												M5.5 Screw Size

												16	No. 3	10	8	5.4	11	0.207"	BSD	DIN 7504 K, ISO 15480	50	90469A135	00000


19	No. 3											10	8	5.4	11	0.207"	BSD	DIN 7504 K, ISO 15480	50	90469A136	00000
22	No. 3											10	8	5.4	11	0.207"	BSD	DIN 7504 K, ISO 15480	50	90469A137	00000
25	No. 3											10	8	5.4	11	0.207"	BSD	DIN 7504 K, ISO 15480	50	90469A138	0000
32	No. 3											10	8	5.4	11	0.207"	BSD	DIN 7504 K, ISO 15480	50	90469A139	00000
38	No. 3	10										8	5.4	11	0.207"	BSD	DIN 7504 K, ISO 15480	50	90469A141	00000
45	No. 3	10	8									5.4	11	0.207"	BSD	DIN 7504 K, ISO 15480	25	90469A142	0000
80	No. 3	10	8									5.4	11	0.207"	BSD	DIN 7504 K, ISO 15480	25	90469A146	00000




		M6.3 Screw Size

		16	No. 3									11	10	5.9	13.5	0.236"	BSD	DIN 7504 K, ISO 15480	50	90469A149	00000


		19	No. 3									11	10	5.9	13.5	0.236"	BSD	DIN 7504 K, ISO 15480	50	90469A151	00000
		22	No. 3	11								10	5.9	13.5	0.236"	BSD	DIN 7504 K, ISO 15480	50	90469A152	00000
		25	No. 3	11	10							5.9	13.5	0.236"	BSD	DIN 7504 K, ISO 15480	50	90469A153	00000
		32	No. 3	11	10							5.9	13.5	0.236"	BSD	DIN 7504 K, ISO 15480	25	90469A154	0000
		38	No. 3	11	10							5.9	13.5	0.236"	BSD	DIN 7504 K, ISO 15480	25	90469A155	0000
		50	No. 3	11	10							5.9	13.5	0.236"	BSD	DIN 7504 K, ISO 15480	25	90469A157	00000
		60	No. 3	11	10							5.9	13.5	0.236"	BSD	DIN 7504 K, ISO 15480	25	90469A158	00000
		70	No. 3	11	10							5.9	13.5	0.236"	BSD	DIN 7504 K, ISO 15480	10	90469A159	0000
		100	No. 3	11	10							5.9	13.5	0.236"	BSD	DIN 7504 K, ISO 15480	10	90469A163	0000

Stainless Steel Phillips Oval Head Screws for Sheet Metal

These corrosion-resistant screws have a decorative rounded top that peeks out from the surface of trim work. Beveled under the head, they’re often used in countersunk holes. Their pointed tip starts a hole in sheet metal up to 0.025" thick, but for thicker material you’ll need to drill first. The Phillips drive handles enough torque to keep drivers from slipping.

Length is measured from the edge of the head.

18-8 Stainless Steel—The choice for wet and outdoor environments, these screws resist rust. However, they won't hold up to the harsh chemicals that 316 stainless steel can.

		Head, mm
	Lg., mm	Dia.	Ht.	Tapping Screw Type	Drive Size	Countersink Angle	Specs. Met	Pkg. Qty.		Pkg.
18-8 Stainless Steel







				M2.2 Screw Size

				6.5	4.3	2	C	No. 1	82°	DIN 7983, ISO 7051	100	97503A111	00000


				9.5	4.3	2	C	No. 1	82°	DIN 7983, ISO 7051	100	97503A112	0000
				13	4.3	2	C	No. 1	82°	DIN 7983, ISO 7051	100	97503A113	00000




						M2.9 Screw Size

						13	5.5	2.6	C	No. 1	82°	DIN 7983, ISO 7051	100	97503A114	0000


						16	5.5	2.6	C	No. 1	82°	DIN 7983, ISO 7051	100	97503A115	0000
						19	5.5	2.6	C	No. 1	82°	DIN 7983, ISO 7051	100	97503A116	0000
						22	5.5	2.6	C	No. 1	82°	DIN 7983, ISO 7051	100	97503A117	0000
						25	5.5	2.6	C	No. 1	82°	DIN 7983, ISO 7051	100	97503A118	0000




								M3.5 Screw Size

								6.5	6.8	3.3	C	No. 2	82°	DIN 7983, ISO 7051	100	97503A119	0000


								9.5	6.8	3.3	C	No. 2	82°	DIN 7983, ISO 7051	100	97503A121	0000
								13	6.8	3.3	C	No. 2	82°	DIN 7983, ISO 7051	100	97503A122	0000
								16	6.8	3.3	C	No. 2	82°	DIN 7983, ISO 7051	100	97503A123	0000
								19	6.8	3.3	C	No. 2	82°	DIN 7983, ISO 7051	100	97503A124	0000
								22	6.8	3.3	C	No. 2	82°	DIN 7983, ISO 7051	100	97503A125	00000
								25	6.8	3.3	C	No. 2	82°	DIN 7983, ISO 7051	100	97503A126	00000
								32	6.8	3.3	C	No. 2	82°	DIN 7983, ISO 7051	50	97503A127	0000
								38	6.8	3.3	C	No. 2	82°	DIN 7983, ISO 7051	50	97503A128	0000




										M3.9 Screw Size

										9.5	7.5	3.6	C	No. 2	82°	DIN 7983, ISO 7051	100	97503A129	00000


										13	7.5	3.6	C	No. 2	82°	DIN 7983, ISO 7051	100	97503A131	00000
										16	7.5	3.6	C	No. 2	82°	DIN 7983, ISO 7051	100	97503A132	00000
										19	7.5	3.6	C	No. 2	82°	DIN 7983, ISO 7051	100	97503A133	00000
										22	7.5	3.6	C	No. 2	82°	DIN 7983, ISO 7051	100	97503A134	00000
										25	7.5	3.6	C	No. 2	82°	DIN 7983, ISO 7051	50	97503A135	0000
										32	7.5	3.6	C	No. 2	82°	DIN 7983, ISO 7051	50	97503A136	00000
										38	7.5	3.6	C	No. 2	82°	DIN 7983, ISO 7051	50	97503A137	0000




M4.2 Screw Size

9.5	8.1											3.9	C	No. 2	82°	DIN 7983, ISO 7051	100	97503A138	00000


13	8.1											3.9	C	No. 2	82°	DIN 7983, ISO 7051	100	97503A139	00000
16	8.1	3.9										C	No. 2	82°	DIN 7983, ISO 7051	100	97503A141	00000
19	8.1	3.9	C									No. 2	82°	DIN 7983, ISO 7051	50	97503A142	0000
22	8.1	3.9	C									No. 2	82°	DIN 7983, ISO 7051	50	97503A143	0000
25	8.1	3.9	C									No. 2	82°	DIN 7983, ISO 7051	50	97503A144	0000
32	8.1	3.9	C									No. 2	82°	DIN 7983, ISO 7051	50	97503A145	00000
38	8.1	3.9	C									No. 2	82°	DIN 7983, ISO 7051	25	97503A146	0000
45	8.1	3.9	C									No. 2	82°	DIN 7983, ISO 7051	25	97503A147	0000
50	8.1	3.9	C									No. 2	82°	DIN 7983, ISO 7051	25	97503A148	0000




		M4.8 Screw Size

		9.5	9.5	4.5	C							No. 2	82°	DIN 7983, ISO 7051	50	97503A149	0000


		13	9.5	4.5	C							No. 2	82°	DIN 7983, ISO 7051	50	97503A151	0000
		16	9.5	4.5	C							No. 2	82°	DIN 7983, ISO 7051	50	97503A152	0000
		19	9.5	4.5	C							No. 2	82°	DIN 7983, ISO 7051	50	97503A153	0000
		22	9.5	4.5	C							No. 2	82°	DIN 7983, ISO 7051	50	97503A154	00000
		25	9.5	4.5	C							No. 2	82°	DIN 7983, ISO 7051	50	97503A155	00000
		32	9.5	4.5	C							No. 2	82°	DIN 7983, ISO 7051	25	97503A156	0000
		38	9.5	4.5	C							No. 2	82°	DIN 7983, ISO 7051	25	97503A157	0000
		45	9.5	4.5	C							No. 2	82°	DIN 7983, ISO 7051	25	97503A158	0000
		50	9.5	4.5	C	No. 2						82°	DIN 7983, ISO 7051	25	97503A159	0000




				M5.5 Screw Size

				13	10.8	5.1	C					No. 3	82°	DIN 7983, ISO 7051	25	97503A161	0000


				16	10.8	5.1	C					No. 3	82°	DIN 7983, ISO 7051	50	97503A162	00000
				19	10.8	5.1	C					No. 3	82°	DIN 7983, ISO 7051	25	97503A163	0000
				22	10.8	5.1	C					No. 3	82°	DIN 7983, ISO 7051	25	97503A164	0000
				25	10.8	5.1	C					No. 3	82°	DIN 7983, ISO 7051	25	97503A165	00000
				32	10.8	5.1	C					No. 3	82°	DIN 7983, ISO 7051	25	97503A166	0000
				38	10.8	5.1	C					No. 3	82°	DIN 7983, ISO 7051	25	97503A167	0000
				45	10.8	5.1	C					No. 3	82°	DIN 7983, ISO 7051	25	97503A168	0000
				50	10.8	5.1	C					No. 3	82°	DIN 7983, ISO 7051	25	97503A169	0000




						M6.3 Screw Size

						13	12.4	5.8	C			No. 3	82°	DIN 7983, ISO 7051	25	97503A171	0000


						16	12.4	5.8	C			No. 3	82°	DIN 7983, ISO 7051	25	97503A172	00000
						19	12.4	5.8	C			No. 3	82°	DIN 7983, ISO 7051	25	97503A173	00000
						22	12.4	5.8	C			No. 3	82°	DIN 7983, ISO 7051	25	97503A174	0000
						25	12.4	5.8	C			No. 3	82°	DIN 7983, ISO 7051	25	97503A175	0000
						32	12.4	5.8	C			No. 3	82°	DIN 7983, ISO 7051	25	97503A176	00000
						38	12.4	5.8	C			No. 3	82°	DIN 7983, ISO 7051	10	97503A177	0000
						45	12.4	5.8	C			No. 3	82°	DIN 7983, ISO 7051	10	97503A178	0000
						50	12.4	5.8	C	No. 3		82°	DIN 7983, ISO 7051	10	97503A179	0000

Steel Phillips Rounded Head Drilling Screws

Drill and fasten metal in one step and create a finished look with these rounded head screws. The Phillips drive withstands less torque than a hex drive, so apply even, steady pressure when drilling.

Length is measured from under the head.

Zinc-Plated Steel—A common choice for areas with occasional exposure to moisture.

		Drill Tip		Head, mm
	Lg., mm	Point Size	Lg., mm	Dia.	Ht.	Max. Drilling Thk., mm	Drive Size	Specs. Met	Pkg. Qty.		Pkg.
Zinc-Plated Steel







				M2.9 Screw Size

				9.5	No. 1	6.25	5.6	2.4	1.9	No. 1	DIN 7504 N, ISO 7049	100	90769A101	00000


				13	No. 1	6.4	5.6	2.4	1.9	No. 1	DIN 7504 N, ISO 7049	100	90769A102	0000
				16	No. 1	6.4	5.6	2.4	1.9	No. 1	DIN 7504 N, ISO 7049	100	90769A103	0000
				19	No. 1	6.5	5.6	2.4	1.9	No. 1	DIN 7504 N, ISO 7049	100	90769A104	0000




						M3.5 Screw Size

						9.5	No. 2	6.65	7	2.6	2.25	No. 2	DIN 7504 N, ISO 7049	100	90769A105	0000


						13	No. 2	6.8	7	2.6	2.25	No. 2	DIN 7504 N, ISO 7049	100	90769A106	0000
						16	No. 2	6.8	7	2.6	2.25	No. 2	DIN 7504 N, ISO 7049	100	90769A107	0000
						19	No. 2	6.9	7	2.6	2.25	No. 2	DIN 7504 N, ISO 7049	100	90769A108	0000
						32	No. 2	6.9	7	2.6	2.25	No. 2	DIN 7504 N, ISO 7049	100	90769A112	00000




								M3.9 Screw Size

								9.5	No. 2	6.7	7.5	2.8	2.4	No. 2	DIN 7504 N, ISO 7049	100	90769A113	00000


								13	No. 2	7.2	7.5	2.8	2.4	No. 2	DIN 7504 N, ISO 7049	100	90769A114	0000
								16	No. 2	7.2	7.5	2.8	2.4	No. 2	DIN 7504 N, ISO 7049	100	90769A115	0000
								19	No. 2	7.3	7.5	2.8	2.4	No. 2	DIN 7504 N, ISO 7049	100	90769A116	0000
								25	No. 2	7.3	7.5	2.8	2.4	No. 2	DIN 7504 N, ISO 7049	100	90769A118	00000
								50	No. 2	7.5	7.5	2.8	2.4	No. 2	DIN 7504 N, ISO 7049	100	90769A123	00000




										M4.2 Screw Size

										13	No. 2	8.7	8.2	3.1	3	No. 2	DIN 7504 N, ISO 7049	100	90769A124	0000


										16	No. 2	8.7	8.2	3.1	3	No. 2	DIN 7504 N, ISO 7049	100	90769A125	0000
										19	No. 2	8.7	8.2	3.1	3	No. 2	DIN 7504 N, ISO 7049	100	90769A126	00000
										22	No. 2	8.7	8.2	3.1	3	No. 2	DIN 7504 N, ISO 7049	100	90769A127	00000
										25	No. 2	8.7	8.2	3.1	3	No. 2	DIN 7504 N, ISO 7049	100	90769A128	00000
										50	No. 2	9	8.2	3.1	3	No. 2	DIN 7504 N, ISO 7049	50	90769A133	00000




												M4.8 Screw Size

												13	No. 2	9.3	9.5	3.7	4.4	No. 2	DIN 7504 N, ISO 7049	100	90769A134	0000


16	No. 2											10.2	9.5	3.7	4.4	No. 2	DIN 7504 N, ISO 7049	100	90769A135	00000
19	No. 2											10.3	9.5	3.7	4.4	No. 2	DIN 7504 N, ISO 7049	100	90769A136	00000
22	No. 2											10.3	9.5	3.7	4.4	No. 2	DIN 7504 N, ISO 7049	100	90769A137	00000
25	No. 2											10.3	9.5	3.7	4.4	No. 2	DIN 7504 N, ISO 7049	100	90769A138	00000
32	No. 2	10.5										9.5	3.7	4.4	No. 2	DIN 7504 N, ISO 7049	50	90769A139	0000
60	No. 2	10.5	9.5									3.7	4.4	No. 2	DIN 7504 N, ISO 7049	50	90769A144	00000
120	No. 2	10.5	9.5									3.7	4.4	No. 2	DIN 7504 N, ISO 7049	10	90769A151	0000




		M5.5 Screw Size

		16	No. 3									11	11	4	5.25	No. 3	DIN 7504 N, ISO 7049	50	90769A152	0000


		19	No. 3									11	11	4	5.25	No. 3	DIN 7504 N, ISO 7049	50	90769A153	0000
		22	No. 3	11								11	4	5.25	No. 3	DIN 7504 N, ISO 7049	50	90769A154	0000
		25	No. 3	11	11							4	5.25	No. 3	DIN 7504 N, ISO 7049	50	90769A155	00000
		32	No. 3	11	11							4	5.25	No. 3	DIN 7504 N, ISO 7049	50	90769A156	00000
		50	No. 3	11	11							4	5.25	No. 3	DIN 7504 N, ISO 7049	25	90769A159	0000
		60	No. 3	11	11							4	5.25	No. 3	DIN 7504 N, ISO 7049	25	90769A161	00000




				M6.3 Screw Size

				16	No. 3							12	12.5	4.6	6	No. 3	DIN 7504 N, ISO 7049	50	90769A164	00000


				19	No. 3	12						12.5	4.6	6	No. 3	DIN 7504 N, ISO 7049	50	90769A165	00000
				22	No. 3	12	12.5					4.6	6	No. 3	DIN 7504 N, ISO 7049	50	90769A166	00000
				25	No. 3	12	12.5					4.6	6	No. 3	DIN 7504 N, ISO 7049	50	90769A167	00000
				32	No. 3	12	12.5					4.6	6	No. 3	DIN 7504 N, ISO 7049	25	90769A168	0000
				50	No. 3	12	12.5					4.6	6	No. 3	DIN 7504 N, ISO 7049	25	90769A172	0000
				100	No. 3	12	12.5					4.6	6	No. 3	DIN 7504 N, ISO 7049	10	90769A177	0000

Steel Phillips Flat Head Drilling Screws

In one step, drill and fasten trim, brackets, and other objects with countersunk holes. These screws have a flat, beveled head to sit flush with surfaces. The Phillips drive withstands less torque than a hex drive, so drill with even, steady pressure.

Length is measured from the top of the head.

Zinc-Plated Steel—A common choice for areas with occasional exposure to moisture.

		Drill Tip		Head, mm
	Lg., mm	Point Size	Lg., mm	Dia.	Ht.	Max. Drilling Thk.	Tapping Screw Type	Drive Size	Countersink Angle	Specs. Met	Flat Head Profile	Pkg. Qty.		Pkg.
Zinc-Plated Steel







				M2.9 Screw Size

				13	No. 1	5.5	5.5	1.7	0.075"	BSD	No. 1	82°	DIN 7504 P, ISO 15482	Standard	100	90227A111	00000


				19	No. 1	5.5	5.5	1.7	0.075"	BSD	No. 1	82°	DIN 7504 P, ISO 15482	Standard	100	90227A113	0000




						M3.5 Screw Size

						13	No. 2	5.9	6.8	2.1	0.089"	BSD	No. 2	82°	DIN 7504 P, ISO 15482	Standard	100	90227A114	0000


						16	No. 2	5.9	6.8	2.1	0.089"	BSD	No. 2	82°	DIN 7504 P, ISO 15482	Standard	100	90227A115	0000
						19	No. 2	5.9	6.8	2.1	0.089"	BSD	No. 2	82°	DIN 7504 P, ISO 15482	Standard	100	90227A116	0000
						25	No. 2	5.9	6.8	2.1	0.089"	BSD	No. 2	82°	DIN 7504 P, ISO 15482	Standard	100	90227A118	0000




								M3.9 Screw Size

								13	No. 2	6.3	7.5	2.3	0.094"	BSD	No. 2	82°	DIN 7504 P, ISO 15482	Standard	100	90227A119	0000


								19	No. 2	6.3	7.5	2.3	0.094"	BSD	No. 2	82°	DIN 7504 P, ISO 15482	Standard	100	90227A122	0000
								25	No. 2	6.3	7.5	2.3	0.094"	BSD	No. 2	82°	DIN 7504 P, ISO 15482	Standard	100	90227A124	00000
								38	No. 2	6.3	7.5	2.3	0.094"	BSD	No. 2	82°	DIN 7504 P, ISO 15482	Standard	100	90227A126	00000




										M4.2 Screw Size

										13	No. 2	7.7	8.1	2.5	0.118"	BSD	No. 2	82°	DIN 7504 P, ISO 15482	Standard	100	90227A128	0000


										19	No. 2	7.7	8.1	2.5	0.118"	BSD	No. 2	82°	DIN 7504 P, ISO 15482	Standard	100	90227A131	0000
										25	No. 2	7.7	8.1	2.5	0.118"	BSD	No. 2	82°	DIN 7504 P, ISO 15482	Standard	100	90227A133	0000
										32	No. 2	7.7	8.1	2.5	0.118"	BSD	No. 2	82°	DIN 7504 P, ISO 15482	Standard	50	90227A134	0000
										38	No. 2	7.7	8.1	2.5	0.118"	BSD	No. 2	82°	DIN 7504 P, ISO 15482	Standard	100	90227A135	00000
										45	No. 2	7.7	8.1	2.5	0.118"	BSD	No. 2	82°	DIN 7504 P, ISO 15482	Standard	50	90227A136	0000




												M4.8 Screw Size

												16	No. 2	9.3	9.5	3	0.173"	BSD	No. 2	82°	DIN 7504 P, ISO 15482	Standard	100	90227A138	00000


												19	No. 2	9.3	9.5	3	0.173"	BSD	No. 2	82°	DIN 7504 P, ISO 15482	Standard	100	90227A139	00000
												25	No. 2	9.3	9.5	3	0.173"	BSD	No. 2	82°	DIN 7504 P, ISO 15482	Standard	100	90227A142	00000
												32	No. 2	9.3	9.5	3	0.173"	BSD	No. 2	82°	DIN 7504 P, ISO 15482	Standard	50	90227A143	0000
												38	No. 2	9.3	9.5	3	0.173"	BSD	No. 2	82°	DIN 7504 P, ISO 15482	Standard	50	90227A144	00000
50												No. 2	9.3	9.5	3	0.173"	BSD	No. 2	82°	DIN 7504 P, ISO 15482	Standard	50	90227A146	00000




		M5.5 Screw Size

		25	No. 3									10	10.8	3.4	0.206"	BSD	No. 3	82°	DIN 7504 P, ISO 15482	Standard	50	90227A147	00000


		32	No. 3									10	10.8	3.4	0.206"	BSD	No. 3	82°	DIN 7504 P, ISO 15482	Standard	50	90227A148	0000
		50	No. 3									10	10.8	3.4	0.206"	BSD	No. 3	82°	DIN 7504 P, ISO 15482	Standard	25	90227A152	0000




				M6.3 Screw Size

				25	No. 3							11	12.4	3.8	0.236"	BSD	No. 3	82°	DIN 7504 P, ISO 15482	Standard	50	90227A153	00000


				32	No. 3							11	12.4	3.8	0.236"	BSD	No. 3	82°	DIN 7504 P, ISO 15482	Standard	50	90227A154	00000
				38	No. 3							11	12.4	3.8	0.236"	BSD	No. 3	82°	DIN 7504 P, ISO 15482	Standard	25	90227A155	0000
				45	No. 3							11	12.4	3.8	0.236"	BSD	No. 3	82°	DIN 7504 P, ISO 15482	Standard	25	90227A156	0000
				50	No. 3							11	12.4	3.8	0.236"	BSD	No. 3	82°	DIN 7504 P, ISO 15482	Standard	25	90227A157	0000
				60	No. 3							11	12.4	3.8	0.236"	BSD	No. 3	82°	DIN 7504 P, ISO 15482	Standard	25	90227A158	0000
				70	No. 3							11	12.4	3.8	0.236"	BSD	No. 3	82°	DIN 7504 P, ISO 15482	Standard	25	90227A159	00000