The hex shape achieves the best possible grip on hex fasteners to prevent rounding their points.

Hold fasteners securely in place as you drive them.

Designed for use with stainless steel fasteners, these sockets are more corrosion resistant than steel sockets and less likely to flake.

Slide the open side of these sockets over a tube or hose to adjust a nut that’s already installed.

With a plastic insert, these sockets firmly grip hex nuts and bolts without rounding them or scratching highly polished finishes.

Pivot the head to access fasteners from an angle.

For easy tightening and loosening, these sockets have pins that grip the slotted sides on bearing nuts.

The short bit on these sockets fits in spaces where height clearance is limited.

Tighten and loosen fasteners at an angle by pivoting the head on these sockets.

When vertical space is tight or you need an extra twist on your socket, use these dual drive hex bit sockets. They work with a standard square drive tool and a box or open end wrench.

Extra-long bits allow access to hard-to-reach fasteners.

Achieve the best possible grip on hex fasteners and prevent rounding.

With a smaller OD than standard sockets, these fit between tightly spaced fasteners.

Pivot the head to access fasteners from an angle.

The 12-point shape quickly positions on hex fasteners.

These sockets are made to withstand the high torque and force of impact tools.

Suitable for occasional maintenance work, these sets are imported.

Pair the sockets in these sets with the bolt-through ratchet wrench to reach nuts at the bottom of a long threaded rod or bolt.

Made in the U.S.A., these tools handle the toughest industrial applications, provide the best grip on fasteners, and have a superior finish.

The sockets in these sets have a cutout and extra length so you can reach and twist nuts without having to disconnect your line.

Keep a convenient variety of drive styles and sizes of bit sockets on hand.

Pivot the head of the sockets in these sets to access fasteners from an angle.

In addition to a standard square drive, the sockets in these sets have a hex-shaped base so you can use a ratchet wrench along with an open-end or box wrench for additional leverage.

The ball end allows angled entry when you don't have exact alignment between the socket bit and fastener.

The hex shape grips hex fasteners and prevents rounding. These sockets are made to withstand the high torque and force of impact tools.

Tighten or loosen nuts and bolts without damaging the finish.

Remove and install dual wheels on trucks and trailers with the sockets in these sets.

Convert from one square drive size to another.

Extra-long bits help you access hard-to-reach fasteners.

A ratchet mechanism allows you to turn fasteners without removing and repositioning the wrench.

When the ratchet head becomes worn or damaged, change it out for a new one.

Extend the length of these wrenches for more reach—the shaft locks into place at set increments. When it’s time to change your socket, release it with the push of a button.

Pair these wrenches with a bolt-through socket to reach nuts at the bottom of a long threaded rod or bolt which can pass through the head of the wrench.

Flip between 1/4″ and 3/8″ drive-size sockets without switching out your wrench.

Sealed against dust, dirt, and moisture, these wrenches can be used in greasy machine shops and dusty construction sites.

The shaft on these wrenches extends and locks at set increments.

Reach over obstructions and access fasteners in tight spots—even in dirty and dusty areas. To protect the ratcheting mechanism, these wrenches have a gasket that seals lubrication in and keeps debris out.

Pivot the head on these wrenches to access fasteners in tight spots.

Pivot the head and extend the handle—these wrenches adapt to reach fasteners in challenging spots. When it’s time to release the socket, just push the button on the back of the head.

A soft, contoured grip gives you a secure, comfortable hold. Use these handles to tighten and loosen sockets from above when there isn’t room to swing a standard wrench.

The ratcheting mechanism turns sockets quickly.

Grip one side of the handle in each hand and twist to free stubborn fasteners.

Extend the shaft for additional length.

Break stuck fasteners loose without causing sparks. Made of aluminum-bronze, these wrench handles meet OSHA requirements that specify nonsparking tools for locations where flammable vapors and combustible residues are present.

Loosen stubborn fasteners while working up high—these wrench handles clip to a carabiner or lanyard (not included) to prevent drops.

When the set torque is reached, these wrenches signal with an audible click and an impulse in the grip.

Made of beryllium copper, these wrenches satisfy OSHA requirements that specify nonsparking tools for locations where flammable vapors and combustible residues are present.

Measure with an accuracy of ±7%.

No need to pull the socket off the tool—push a button to release.

The most advanced torque wrenches we offer, these tools store and recall up to 1,500 torque and angle measurements.

Pivot the head to access fasteners in tight spots.

Trust the precision of your measurements—these wrenches are accurate to ±1%.

Unlike most torque wrenches, you don’t have to return the torque setting to the lowest value after use. These tools are also known as split-beam torque wrenches.

Also known as impact drivers, use these tools with impact sockets to break frozen bolts and screws free. Strike with a hammer to tighten and loosen fasteners.

Set torque and the wrench will prevent you from exceeding it. These are also known as nutrunners.

Built to last, these wrenches have an enclosed steel head that seals lubrication in and dirt, dust, and moisture out to protect the ratchet mechanism. Since they’re air powered, these wrenches turn fasteners more quickly than handheld wrenches.