Metric Stainless Steel Tapping Screws

Filter by

Screw Size

Length

Fastener Head Type

Drive Style

For Use In

Tip Type

Head Diameter

Rounded Head Style

Tapping Screw Type

Drive Size

Shank Cross Section

Drill Bit Decimal Size Equivalent

Countersink Angle

RoHS

Performance

REACH

Drill Bit Size

U.S.–Mexico–Canada Agreement (USMCA) Qualifying

Yes

Export Control Classification Number (ECCN)

EAR99

DFARS Specialty Metals

Compliant

Not Compliant

Approximate Thread Pitch

Specifications Met

Flange Diameter

Oval Top Height

450 Products

About Tapping Screws

Compare drilling, pointed, thread-forming, and thread-cutting tips to find the best choice for your material.

Fastener Head Type

Rounded

The most common head type creates a finished look

240 products

Flat

Sit neatly in countersunk holes for a flush finish

147 products

Fastener Head Type

Flanged

Distribute pressure evenly to prevent damaging material

30 products

Oval

Decorative head for trim, mounting plates, and door knobs

63 products

Stainless Steel Phillips Rounded Head Thread-Forming Screws for Plastic

Round

Shank

Cross

Section

Our most popular thread-forming screws for plastic also resist rust. Thread them directly into molded or cast holes—no inserts needed. Screws won’t crack or distort material when fastening enclosures, panels, and other plastic components. The Phillips drive handles enough torque to keep drivers from slipping and the rounded head creates a finished look.

Length is measured from under the head.

18-8 Stainless Steel—The choice for wet and outdoor environments, these screws resist rust. However, they won't hold up to the harsh chemicals that 316 stainless steel can.

Round—The sharply angled threads drive into plastic with less force and a lower risk of cracking than other tapping screws. The base of the threads is recessed to bite deep into material and hold tight. You can reuse these screws a few times without stripping the threads. They're comparable to PT screws.

		Head, mm
	Lg., mm	Dia.	Ht.	Tapping Screw Type	Drive Size	Drill Bit Size	Shank Cross Section	Pkg. Qty.		Pkg.
18-8 Stainless Steel







				M1.6 Screw Size

				5	2.6	1.1	TRS	No. 0	55 Ga.	Round	25	99461A911	00000


				6	2.6	1.1	TRS	No. 0	55 Ga.	Round	25	99461A912	0000
				8	2.6	1.1	TRS	No. 0	55 Ga.	Round	25	99461A913	0000




						M2 Screw Size

						5	3.5	1.4	TRS	No. 1	52 Ga.	Round	25	99461A914	0000


						6	3.5	1.4	TRS	No. 1	52 Ga.	Round	25	99461A915	0000
						8	3.5	1.4	TRS	No. 1	52 Ga.	Round	25	99461A916	0000
						10	3.5	1.4	TRS	No. 1	52 Ga.	Round	25	99461A917	0000




								M2.2 Screw Size

								4	3.9	1.6	TRS	No. 1	50 Ga.	Round	50	99461A918	0000


								5	3.9	1.6	TRS	No. 1	50 Ga.	Round	100	99461A919	00000
								6	3.9	1.6	TRS	No. 1	50 Ga.	Round	100	99461A921	00000
								8	3.9	1.6	TRS	No. 1	50 Ga.	Round	50	99461A922	0000
								10	3.9	1.6	TRS	No. 1	50 Ga.	Round	100	99461A923	00000
								12	3.9	1.6	TRS	No. 1	50 Ga.	Round	100	99461A924	00000
								14	3.9	1.6	TRS	No. 1	50 Ga.	Round	100	99461A925	00000
								16	3.9	1.6	TRS	No. 1	50 Ga.	Round	100	99461A926	00000
								18	3.9	1.6	TRS	No. 1	50 Ga.	Round	50	99461A927	00000




										M2.5 Screw Size

										5	4.4	1.8	TRS	No. 1	45 Ga.	Round	100	99461A928	00000


										6	4.4	1.8	TRS	No. 1	45 Ga.	Round	100	99461A929	00000
										8	4.4	1.8	TRS	No. 1	45 Ga.	Round	100	99461A931	00000
										10	4.4	1.8	TRS	No. 1	45 Ga.	Round	50	99461A932	0000
										12	4.4	1.8	TRS	No. 1	45 Ga.	Round	50	99461A933	0000
										14	4.4	1.8	TRS	No. 1	45 Ga.	Round	50	99461A934	0000
										16	4.4	1.8	TRS	No. 1	45 Ga.	Round	50	99461A935	0000
										18	4.4	1.8	TRS	No. 1	45 Ga.	Round	50	99461A936	0000
										20	4.4	1.8	TRS	No. 1	45 Ga.	Round	50	99461A937	00000




M3 Screw Size

5	5.3											2.1	TRS	No. 1	41 Ga.	Round	50	99461A938	0000


6	5.3											2.1	TRS	No. 1	41 Ga.	Round	100	99461A939	00000
8	5.3	2.1										TRS	No. 1	41 Ga.	Round	50	99461A941	0000
10	5.3	2.1	TRS									No. 1	41 Ga.	Round	50	99461A942	0000
12	5.3	2.1	TRS									No. 1	41 Ga.	Round	50	99461A943	0000
14	5.3	2.1	TRS									No. 1	41 Ga.	Round	50	99461A944	0000
16	5.3	2.1	TRS									No. 1	41 Ga.	Round	50	99461A945	0000
18	5.3	2.1	TRS									No. 1	41 Ga.	Round	50	99461A946	00000
20	5.3	2.1	TRS									No. 1	41 Ga.	Round	50	99461A947	00000
25	5.3	2.1	TRS									No. 1	41 Ga.	Round	50	99461A948	00000
30	5.3	2.1	TRS									No. 1	41 Ga.	Round	50	99461A949	00000




		M3.5 Screw Size

		8	6.1	2.6	TRS							No. 1	34 Ga.	Round	50	99461A951	0000


		10	6.1	2.6	TRS							No. 1	34 Ga.	Round	50	99461A952	0000
		12	6.1	2.6	TRS							No. 1	34 Ga.	Round	50	99461A953	0000
		14	6.1	2.6	TRS							No. 1	34 Ga.	Round	50	99461A954	0000
		16	6.1	2.6	TRS							No. 1	34 Ga.	Round	50	99461A955	00000
		18	6.1	2.6	TRS							No. 1	34 Ga.	Round	50	99461A956	00000
		20	6.1	2.6	TRS							No. 1	34 Ga.	Round	50	99461A957	00000
		25	6.1	2.6	TRS	No. 1						34 Ga.	Round	50	99461A958	00000
		30	6.1	2.6	TRS	No. 1	34 Ga.					Round	25	99461A959	0000
		35	6.1	2.6	TRS	No. 1	34 Ga.					Round	25	99461A961	0000




				M4 Screw Size

				5	7	2.8	TRS					No. 1	30 Ga.	Round	25	99461A962	0000


				6	7	2.8	TRS					No. 1	30 Ga.	Round	25	99461A963	0000
				8	7	2.8	TRS					No. 1	30 Ga.	Round	50	99461A964	0000
				10	7	2.8	TRS					No. 1	30 Ga.	Round	50	99461A965	0000
				12	7	2.8	TRS					No. 1	30 Ga.	Round	50	99461A966	00000
				14	7	2.8	TRS					No. 1	30 Ga.	Round	50	99461A967	00000
				16	7	2.8	TRS					No. 1	30 Ga.	Round	50	99461A968	00000
				18	7	2.8	TRS	No. 1				30 Ga.	Round	50	99461A969	00000
				20	7	2.8	TRS	No. 1	30 Ga.			Round	25	99461A971	0000
				25	7	2.8	TRS	No. 1	30 Ga.			Round	25	99461A972	0000
				30	7	2.8	TRS	No. 1	30 Ga.			Round	25	99461A973	0000


				35	7	2.8	TRS	No. 1	30 Ga.			Round	25	99461A974	00000
				40	7	2.8	TRS	No. 1	30 Ga.			Round	10	99461A975	0000




						M5 Screw Size

						8	8.8	3.32	TRS			No. 2	21 Ga.	Round	25	99461A976	00000


						10	8.8	3.32	TRS	No. 2		21 Ga.	Round	25	99461A977	00000
						12	8.8	3.32	TRS	No. 2	21 Ga.	Round	25	99461A978	00000
						14	8.8	3.32	TRS	No. 2	21 Ga.	Round	25	99461A979	00000
						16	8.8	3.32	TRS	No. 2	21 Ga.	Round	10	99461A981	0000
						18	8.8	3.32	TRS	No. 2	21 Ga.	Round	10	99461A982	0000
						20	8.8	3.32	TRS	No. 2	21 Ga.	Round	10	99461A983	0000
						25	8.8	3.32	TRS	No. 2	21 Ga.	Round	10	99461A984	0000
						30	8.8	3.32	TRS	No. 2	21 Ga.	Round	10	99461A985	0000

Stainless Steel Phillips Oval Head Screws for Sheet Metal

These corrosion-resistant screws have a decorative rounded top that peeks out from the surface of trim work. Beveled under the head, they’re often used in countersunk holes. Their pointed tip starts a hole in sheet metal up to 0.025" thick, but for thicker material you’ll need to drill first. The Phillips drive handles enough torque to keep drivers from slipping.

Length is measured from the edge of the head.

18-8 Stainless Steel—The choice for wet and outdoor environments, these screws resist rust. However, they won't hold up to the harsh chemicals that 316 stainless steel can.

		Head, mm
	Lg., mm	Dia.	Ht.	Tapping Screw Type	Drive Size	Countersink Angle	Specs. Met	Pkg. Qty.		Pkg.
18-8 Stainless Steel







				M2.2 Screw Size

				6.5	4.3	2	C	No. 1	82°	DIN 7983, ISO 7051	100	97503A111	00000


				9.5	4.3	2	C	No. 1	82°	DIN 7983, ISO 7051	100	97503A112	0000
				13	4.3	2	C	No. 1	82°	DIN 7983, ISO 7051	100	97503A113	00000




						M2.9 Screw Size

						13	5.5	2.6	C	No. 1	82°	DIN 7983, ISO 7051	100	97503A114	0000


						16	5.5	2.6	C	No. 1	82°	DIN 7983, ISO 7051	100	97503A115	0000
						19	5.5	2.6	C	No. 1	82°	DIN 7983, ISO 7051	100	97503A116	0000
						22	5.5	2.6	C	No. 1	82°	DIN 7983, ISO 7051	100	97503A117	0000
						25	5.5	2.6	C	No. 1	82°	DIN 7983, ISO 7051	100	97503A118	0000




								M3.5 Screw Size

								6.5	6.8	3.3	C	No. 2	82°	DIN 7983, ISO 7051	100	97503A119	0000


								9.5	6.8	3.3	C	No. 2	82°	DIN 7983, ISO 7051	100	97503A121	0000
								13	6.8	3.3	C	No. 2	82°	DIN 7983, ISO 7051	100	97503A122	0000
								16	6.8	3.3	C	No. 2	82°	DIN 7983, ISO 7051	100	97503A123	0000
								19	6.8	3.3	C	No. 2	82°	DIN 7983, ISO 7051	100	97503A124	0000
								22	6.8	3.3	C	No. 2	82°	DIN 7983, ISO 7051	100	97503A125	00000
								25	6.8	3.3	C	No. 2	82°	DIN 7983, ISO 7051	100	97503A126	00000
								32	6.8	3.3	C	No. 2	82°	DIN 7983, ISO 7051	50	97503A127	0000
								38	6.8	3.3	C	No. 2	82°	DIN 7983, ISO 7051	50	97503A128	0000




										M3.9 Screw Size

										9.5	7.5	3.6	C	No. 2	82°	DIN 7983, ISO 7051	100	97503A129	00000


										13	7.5	3.6	C	No. 2	82°	DIN 7983, ISO 7051	100	97503A131	00000
										16	7.5	3.6	C	No. 2	82°	DIN 7983, ISO 7051	100	97503A132	00000
										19	7.5	3.6	C	No. 2	82°	DIN 7983, ISO 7051	100	97503A133	00000
										22	7.5	3.6	C	No. 2	82°	DIN 7983, ISO 7051	100	97503A134	00000
										25	7.5	3.6	C	No. 2	82°	DIN 7983, ISO 7051	50	97503A135	0000
										32	7.5	3.6	C	No. 2	82°	DIN 7983, ISO 7051	50	97503A136	00000
										38	7.5	3.6	C	No. 2	82°	DIN 7983, ISO 7051	50	97503A137	0000




M4.2 Screw Size

9.5	8.1											3.9	C	No. 2	82°	DIN 7983, ISO 7051	100	97503A138	00000


13	8.1											3.9	C	No. 2	82°	DIN 7983, ISO 7051	100	97503A139	00000
16	8.1	3.9										C	No. 2	82°	DIN 7983, ISO 7051	100	97503A141	00000
19	8.1	3.9	C									No. 2	82°	DIN 7983, ISO 7051	50	97503A142	0000
22	8.1	3.9	C									No. 2	82°	DIN 7983, ISO 7051	50	97503A143	0000
25	8.1	3.9	C									No. 2	82°	DIN 7983, ISO 7051	50	97503A144	0000
32	8.1	3.9	C									No. 2	82°	DIN 7983, ISO 7051	50	97503A145	00000
38	8.1	3.9	C									No. 2	82°	DIN 7983, ISO 7051	25	97503A146	0000
45	8.1	3.9	C									No. 2	82°	DIN 7983, ISO 7051	25	97503A147	0000
50	8.1	3.9	C									No. 2	82°	DIN 7983, ISO 7051	25	97503A148	0000




		M4.8 Screw Size

		9.5	9.5	4.5	C							No. 2	82°	DIN 7983, ISO 7051	50	97503A149	0000


		13	9.5	4.5	C							No. 2	82°	DIN 7983, ISO 7051	50	97503A151	0000
		16	9.5	4.5	C							No. 2	82°	DIN 7983, ISO 7051	50	97503A152	0000
		19	9.5	4.5	C							No. 2	82°	DIN 7983, ISO 7051	50	97503A153	0000
		22	9.5	4.5	C							No. 2	82°	DIN 7983, ISO 7051	50	97503A154	00000
		25	9.5	4.5	C							No. 2	82°	DIN 7983, ISO 7051	50	97503A155	00000
		32	9.5	4.5	C							No. 2	82°	DIN 7983, ISO 7051	25	97503A156	0000
		38	9.5	4.5	C							No. 2	82°	DIN 7983, ISO 7051	25	97503A157	0000
		45	9.5	4.5	C							No. 2	82°	DIN 7983, ISO 7051	25	97503A158	0000
		50	9.5	4.5	C	No. 2						82°	DIN 7983, ISO 7051	25	97503A159	0000




				M5.5 Screw Size

				13	10.8	5.1	C					No. 3	82°	DIN 7983, ISO 7051	25	97503A161	0000


				16	10.8	5.1	C					No. 3	82°	DIN 7983, ISO 7051	50	97503A162	00000
				19	10.8	5.1	C					No. 3	82°	DIN 7983, ISO 7051	25	97503A163	0000
				22	10.8	5.1	C					No. 3	82°	DIN 7983, ISO 7051	25	97503A164	0000
				25	10.8	5.1	C					No. 3	82°	DIN 7983, ISO 7051	25	97503A165	00000
				32	10.8	5.1	C					No. 3	82°	DIN 7983, ISO 7051	25	97503A166	0000
				38	10.8	5.1	C					No. 3	82°	DIN 7983, ISO 7051	25	97503A167	0000
				45	10.8	5.1	C					No. 3	82°	DIN 7983, ISO 7051	25	97503A168	0000
				50	10.8	5.1	C					No. 3	82°	DIN 7983, ISO 7051	25	97503A169	0000




						M6.3 Screw Size

						13	12.4	5.8	C			No. 3	82°	DIN 7983, ISO 7051	25	97503A171	0000


						16	12.4	5.8	C			No. 3	82°	DIN 7983, ISO 7051	25	97503A172	00000
						19	12.4	5.8	C			No. 3	82°	DIN 7983, ISO 7051	25	97503A173	00000
						22	12.4	5.8	C			No. 3	82°	DIN 7983, ISO 7051	25	97503A174	0000
						25	12.4	5.8	C			No. 3	82°	DIN 7983, ISO 7051	25	97503A175	0000
						32	12.4	5.8	C			No. 3	82°	DIN 7983, ISO 7051	25	97503A176	00000
						38	12.4	5.8	C			No. 3	82°	DIN 7983, ISO 7051	10	97503A177	0000
						45	12.4	5.8	C			No. 3	82°	DIN 7983, ISO 7051	10	97503A178	0000
						50	12.4	5.8	C	No. 3		82°	DIN 7983, ISO 7051	10	97503A179	0000

Stainless Steel Torx Plus Rounded Head Thread-Forming Screws for Thin-Walled Holes in Plastic

These corrosion-resistant screws thread into thin plastic without damaging the drive or your workpiece. The deep, six-lobe recess withstands more torque than a Torx drive to prevent slipping. These screws have narrow-angle threads that prevent cracking and discoloration in molded plastics, such as ABS, PVC, and polycarbonate. The rounded head creates a finished look.

Length is measured from under the head.

18-8 Stainless Steel—The choice for wet and outdoor environments, these screws resist rust. However, they won't hold up to the harsh chemicals that 316 stainless steel can.

		Head, mm
	Lg., mm	Dia.	Ht.	Tapping Screw Type	Drive Size	Drill Bit Size	Shank Cross Section	Pkg. Qty.		Pkg.
18-8 Stainless Steel







				M1 Screw Size

				3	1.875	0.8	TRS	IP2, T2	67 Ga.	Round	25	96817A704	000000


				4	1.875	0.8	TRS	IP2, T2	67 Ga.	Round	25	96817A707	00000




						M1.2 Screw Size

						2	2.175	0.95	TRS	IP3, T3	62 Ga.	Round	25	96817A742	00000


						3	2.175	0.95	TRS	IP3, T3	62 Ga.	Round	25	96817A744	00000
						4	2.175	0.95	TRS	IP3, T3	62 Ga.	Round	25	96817A746	00000
						5	2.175	0.95	TRS	IP3, T3	62 Ga.	Round	25	96817A748	00000




								M1.4 Screw Size

								3	2.35	1.15	TRS	IP3, T3	56 Ga.	Round	25	96817A780	00000


								4	2.35	1.15	TRS	IP3, T3	56 Ga.	Round	25	96817A783	00000
								5	2.35	1.15	TRS	IP3, T3	56 Ga.	Round	25	96817A785	00000
								6	2.35	1.15	TRS	IP3, T3	56 Ga.	Round	25	96817A787	00000




										M1.6 Screw Size

										3	2.75	1.2	TRS	IP5, T5	55 Ga.	Round	25	96817A795	0000


										4	2.75	1.2	TRS	IP5, T5	55 Ga.	Round	25	96817A797	00000
										5	2.75	1.2	TRS	IP5, T5	55 Ga.	Round	25	96817A799	00000
										6	2.75	1.2	TRS	IP5, T5	55 Ga.	Round	25	96817A800	00000




												M1.8 Screw Size

												3	3.05	1.35	TRS	IP6, T6	54 Ga.	Round	25	96817A812	00000


												4	3.05	1.35	TRS	IP6, T6	54 Ga.	Round	25	96817A814	00000
												5	3.05	1.35	TRS	IP6, T6	54 Ga.	Round	25	96817A816	00000
												6	3.05	1.35	TRS	IP6, T6	54 Ga.	Round	25	96817A818	00000




	M2 Screw Size

	3												3.35	1.6	TRS	IP6, T6	52 Ga.	Round	25	96817A838	00000


	4	3.35											1.6	TRS	IP6, T6	52 Ga.	Round	25	96817A840	00000
	5	3.35	1.6										TRS	IP6, T6	52 Ga.	Round	25	96817A842	00000
	6	3.35	1.6										TRS	IP6, T6	52 Ga.	Round	25	96817A844	00000
	8	3.35	1.6										TRS	IP6, T6	52 Ga.	Round	25	96817A846	00000




			M2.2 Screw Size

			4										3.75	1.6	TRS	IP6, T6	50 Ga.	Round	25	96817A861	0000


			5	3.75	1.6								TRS	IP6, T6	50 Ga.	Round	25	96817A863	0000
			6	3.75	1.6								TRS	IP6, T6	50 Ga.	Round	25	96817A865	0000
			8	3.75	1.6								TRS	IP6, T6	50 Ga.	Round	25	96817A867	0000
			10	3.75	1.6								TRS	IP6, T6	50 Ga.	Round	25	96817A869	00000




					M2.5 Screw Size

					5								4.25	1.9	TRS	IP8, T8	45 Ga.	Round	25	96817A890	0000


					6	4.25	1.9						TRS	IP8, T8	45 Ga.	Round	25	96817A892	0000
					8	4.25	1.9						TRS	IP8, T8	45 Ga.	Round	25	96817A894	0000
					10	4.25	1.9						TRS	IP8, T8	45 Ga.	Round	25	96817A896	00000
					12	4.25	1.9						TRS	IP8, T8	45 Ga.	Round	25	96817A899	00000




							M3 Screw Size

							5						5.15	2.3	TRS	IP10, T10	41 Ga.	Round	25	96817A904	0000


							6	5.15	2.3				TRS	IP10, T10	41 Ga.	Round	25	96817A906	0000
							8	5.15	2.3				TRS	IP10, T10	41 Ga.	Round	25	96817A908	00000
							10	5.15	2.3				TRS	IP10, T10	41 Ga.	Round	25	96817A910	00000
							12	5.15	2.3				TRS	IP10, T10	41 Ga.	Round	25	96817A912	00000




									M3.5 Screw Size

									6				5.92	2.7	TRS	IP15, T15	34 Ga.	Round	25	96817A932	00000


									10	5.92	2.7		TRS	IP15, T15	34 Ga.	Round	25	96817A935	00000
									12	5.92	2.7		TRS	IP15, T15	34 Ga.	Round	25	96817A938	00000




M4 Screw Size

8											6.82		3.1	TRS	IP20, T20	30 Ga.	Round	25	96817A950	00000


10											6.82	3.1	TRS	IP20, T20	30 Ga.	Round	25	96817A953	00000
12											6.82	3.1	TRS	IP20, T20	30 Ga.	Round	25	96817A956	00000
14											6.82	3.1	TRS	IP20, T20	30 Ga.	Round	25	96817A959	00000




												M4.5 Screw Size

	8	7.5										3.35	TRS	IP20, T20	27 Ga.	Round	25	96817A971	00000


	10	7.5										3.35	TRS	IP20, T20	27 Ga.	Round	25	96817A973	00000
	12	7.5										3.35	TRS	IP20, T20	27 Ga.	Round	25	96817A975	00000
	14	7.5										3.35	TRS	IP20, T20	27 Ga.	Round	25	96817A977	00000




												M5 Screw Size

			10									8.62	3.5	TRS	IP25, T25	21 Ga.	Round	25	96817A984	00000


			12	8.62								3.5	TRS	IP25, T25	21 Ga.	Round	25	96817A987	00000




												M6 Screw Size

												12	10.5	4.35	TRS	IP30, T30	12 Ga.	Round	25	96817A992	00000


					14							10.5	4.35	TRS	IP30, T30	12 Ga.	Round	25	96817A996	00000

Stainless Steel Phillips Rounded Head Screws for Sheet Metal

Our most popular sheet metal screws also resist rust. Their pointed tip starts a hole in sheets up to 0.025" thick, but for thicker material you’ll need to drill first. The Phillips drive handles enough torque to keep drivers from slipping and the rounded head creates a finished look.

Length is measured from under the head.

18-8 Stainless Steel—The choice for wet and outdoor environments, these screws resist rust. However, they won't hold up to the harsh chemicals that 316 stainless steel can.

		Head, mm
	Lg., mm	Dia.	Ht.	Tapping Screw Type	Drive Size	Specs. Met	Pkg. Qty.		Pkg.
18-8 Stainless Steel







				M2.2 Screw Size

				6.5	4.2	1.8	C	No. 1	DIN 7981	50	94997A125	000000


				9.5	4.2	1.8	C	No. 1	DIN 7981	50	94997A130	00000
				13	4.2	1.8	C	No. 1	DIN 7981	50	92470A351	00000
				16	4.2	1.8	C	No. 1	DIN 7981	50	92470A352	00000




						M2.9 Screw Size

						6.5	5.6	2.2	C	No. 1	DIN 7981	50	94997A225	00000


						9.5	5.6	2.2	C	No. 1	DIN 7981	50	94997A250	00000
						13	5.6	2.2	C	No. 1	DIN 7981	50	94997A275	00000
						16	5.6	2.2	C	No. 1	DIN 7981	25	92470A353	00000
						19	5.6	2.2	C	No. 1	DIN 7981	25	92470A354	00000
						22	5.6	2.2	C	No. 1	DIN 7981	25	92470A355	00000
						25	5.6	2.2	C	No. 1	DIN 7981	25	92470A356	00000




								M3.5 Screw Size

								9.5	6.9	2.6	C	No. 2	DIN 7981	25	92470A357	00000


								13	6.9	2.6	C	No. 2	DIN 7981	25	94997A300	00000
								16	6.9	2.6	C	No. 2	DIN 7981	25	92470A358	00000
								19	6.9	2.6	C	No. 2	DIN 7981	25	94997A325	00000
								22	6.9	2.6	C	No. 2	DIN 7981	25	92470A359	00000
								25	6.9	2.6	C	No. 2	DIN 7981	25	94997A350	00000
								32	6.9	2.6	C	No. 2	DIN 7981	25	92470A361	00000




										M3.9 Screw Size

										9.5	7.5	2.8	C	No. 2	DIN 7981	25	92470A362	00000


										13	7.5	2.8	C	No. 2	DIN 7981	25	94997A400	00000
										16	7.5	2.8	C	No. 2	DIN 7981	25	92470A363	00000
										19	7.5	2.8	C	No. 2	DIN 7981	25	94997A425	00000
										22	7.5	2.8	C	No. 2	DIN 7981	25	92470A364	00000
										25	7.5	2.8	C	No. 2	DIN 7981	25	94997A450	00000




												M4.2 Screw Size

9.5	8.2											3.1	C	No. 2	DIN 7981	25	92470A365	00000


13	8.2											3.1	C	No. 2	DIN 7981	25	92470A366	00000
16	8.2	3.1										C	No. 2	DIN 7981	25	92470A367	00000
19	8.2	3.1	C									No. 2	DIN 7981	25	92470A368	00000
22	8.2	3.1	C									No. 2	DIN 7981	25	92470A369	00000
25	8.2	3.1	C									No. 2	DIN 7981	25	92470A371	00000
32	8.2	3.1	C									No. 2	DIN 7981	25	92470A372	00000
38	8.2	3.1	C									No. 2	DIN 7981	10	92470A373	00000




		M4.8 Screw Size

		13	9.5									3.6	C	No. 2	DIN 7981	10	92470A374	0000


		16	9.5	3.6	C							No. 2	DIN 7981	10	92470A375	0000
		19	9.5	3.6	C							No. 2	DIN 7981	10	92470A376	0000
		22	9.5	3.6	C							No. 2	DIN 7981	10	92470A377	00000
		25	9.5	3.6	C							No. 2	DIN 7981	10	92470A378	00000
		32	9.5	3.6	C							No. 2	DIN 7981	10	92470A379	00000
		38	9.5	3.6	C							No. 2	DIN 7981	10	92470A381	00000




				M5.5 Screw Size

				13	10.8							4	C	No. 3	DIN 7981	10	92470A382	00000


				16	10.8	4	C					No. 3	DIN 7981	10	92470A383	00000
				19	10.8	4	C					No. 3	DIN 7981	10	92470A384	00000
				25	10.8	4	C					No. 3	DIN 7981	10	92470A385	00000
				32	10.8	4	C					No. 3	DIN 7981	10	92470A386	00000
				38	10.8	4	C					No. 3	DIN 7981	10	92470A387	00000

Stainless Steel Phillips Flat Head Screws for Sheet Metal

These corrosion-resistant screws fasten trim, brackets, and other objects with countersunk holes to sheet metal. The head is flat on top and beveled underneath to sit flush with surfaces. Screws have a pointed tip that starts a hole in sheets up to 0.025" thick, but for thicker material you’ll need to drill first. The Phillips drive handles enough torque to keep drivers from slipping.

Length is measured from the top of the head.

18-8 Stainless Steel—The choice for wet and outdoor environments, these screws resist rust. However, they won't hold up to the harsh chemicals that 316 stainless steel can.

		Head, mm
	Lg., mm	Dia.	Ht.	Tapping Screw Type	Drive Size	Countersink Angle	Flat Head Profile	Specs. Met	Pkg. Qty.		Pkg.
18-8 Stainless Steel







				M2.2 Screw Size

				6.5	4.2	1.8	C	No. 1	80°	Standard	DIN 7982 Type C	50	95844A610	000000


				9.5	4.2	1.8	C	No. 1	80°	Standard	DIN 7982 Type C	50	95844A611	00000
				13	4.2	1.8	C	No. 1	80°	Standard	DIN 7982 Type C	50	95844A612	00000
				16	4.2	1.8	C	No. 1	80°	Standard	DIN 7982 Type C	50	95844A613	00000
				19	4.2	1.8	C	No. 1	80°	Standard	DIN 7982 Type C	25	95844A614	00000




						M2.9 Screw Size

						9.5	5.5	1.7	C	No. 1	80°	Standard	DIN 7982 Type C	50	95844A225	00000


						13	5.5	1.7	C	No. 1	80°	Standard	DIN 7982 Type C	50	95844A250	00000
						16	5.5	1.7	C	No. 1	80°	Standard	DIN 7982 Type C	50	95844A615	00000
						19	5.5	1.7	C	No. 1	80°	Standard	DIN 7982 Type C	50	95844A275	00000




								M3.5 Screw Size

								13	6.8	2.1	C	No. 2	80°	Standard	DIN 7982 Type C	25	95844A300	00000


								16	6.8	2.1	C	No. 2	80°	Standard	DIN 7982 Type C	25	95844A618	00000
								19	6.8	2.1	C	No. 2	80°	Standard	DIN 7982 Type C	25	95844A325	00000
								22	6.8	2.1	C	No. 2	80°	Standard	DIN 7982 Type C	25	95844A619	00000
								25	6.8	2.1	C	No. 2	80°	Standard	DIN 7982 Type C	25	95844A350	00000




										M3.9 Screw Size

										13	7.5	2.3	C	No. 2	80°	Standard	DIN 7982 Type C	25	95844A400	00000


										16	7.5	2.3	C	No. 2	80°	Standard	DIN 7982 Type C	25	95844A621	00000
										19	7.5	2.3	C	No. 2	80°	Standard	DIN 7982 Type C	25	95844A425	00000
										25	7.5	2.3	C	No. 2	80°	Standard	DIN 7982 Type C	25	95844A450	00000




												M4.2 Screw Size

												13	8.1	2.5	C	No. 2	80°	Standard	DIN 7982 Type C	25	95844A500	00000


												16	8.1	2.5	C	No. 2	80°	Standard	DIN 7982 Type C	25	95844A623	00000
												19	8.1	2.5	C	No. 2	80°	Standard	DIN 7982 Type C	25	95844A525	00000
22												8.1	2.5	C	No. 2	80°	Standard	DIN 7982 Type C	25	95844A624	00000
25	8.1											2.5	C	No. 2	80°	Standard	DIN 7982 Type C	10	95844A550	00000
32	8.1											2.5	C	No. 2	80°	Standard	DIN 7982 Type C	10	95844A625	00000
38	8.1											2.5	C	No. 2	80°	Standard	DIN 7982 Type C	10	95844A626	00000




		M4.8 Screw Size

		16	9.5									3.55	C	No. 2	80°	Standard	DIN 7982 Type C	10	95844A627	0000


		19	9.5									3.55	C	No. 2	80°	Standard	DIN 7982 Type C	10	95844A628	0000
		22	9.5									3.55	C	No. 2	80°	Standard	DIN 7982 Type C	10	95844A629	0000
		25	9.5									3.55	C	No. 2	80°	Standard	DIN 7982 Type C	10	95844A631	0000




				M5.5 Screw Size

				22	10.8							3.95	C	No. 3	80°	Standard	DIN 7982 Type C	10	95844A636	00000


				25	10.8							3.95	C	No. 3	80°	Standard	DIN 7982 Type C	10	95844A637	00000
				32	10.8							3.95	C	No. 3	80°	Standard	DIN 7982 Type C	5	95844A638	00000
				38	10.8							3.95	C	No. 3	80°	Standard	DIN 7982 Type C	5	95844A639	00000

Stainless Steel Torx Flanged Rounded Head Thread-Forming Screws for Thin-Walled Holes in Plastic

These corrosion-resistant screws have a flange under the head to distribute pressure and prevent denting or pulling through thin plastic. Their narrow-angle threads drive into ABS, PVC, and polycarbonate without cracking or discoloring the material. The Torx drive ensures a good grip with less slip than slotted, Phillips, square, or hex drives. These screws have a rounded head to create a finished look.

Length is measured from under the flange.

18-8 Stainless Steel—The choice for wet and outdoor environments, these screws resist rust. However, they won't hold up to the harsh chemicals that 316 stainless steel can.

	Head Ht., mm	Flange Dia., mm	Tapping Screw Type	Drive Size	Drill Bit Size	Shank Cross Section	Pkg. Qty.		Pkg.
18-8 Stainless Steel







			M1.6 Screw Size

			5	1.3	3.6	TRS	T5	56 Ga.	Round	25	96817A401	00000


			6	1.3	3.6	TRS	T5	56 Ga.	Round	25	96817A402	0000
			8	1.3	3.6	TRS	T5	56 Ga.	Round	25	96817A403	0000




					M2 Screw Size

					4	1.3	4	TRS	T6	58 Ga.	Round	25	96817A404	0000


					5	1.3	4	TRS	T6	58 Ga.	Round	25	96817A405	0000
					6	1.3	4	TRS	T6	58 Ga.	Round	25	96817A406	00000
					8	1.3	4	TRS	T6	58 Ga.	Round	25	96817A407	00000




							M2.2 Screw Size

							4	1.4	4.5	TRS	T6	56 Ga.	Round	25	96817A408	0000


							5	1.4	4.5	TRS	T6	56 Ga.	Round	50	96817A409	00000
							6	1.4	4.5	TRS	T6	56 Ga.	Round	25	96817A411	0000
							8	1.4	4.5	TRS	T6	56 Ga.	Round	25	96817A412	0000




									M2.5 Screw Size

									5	1.5	5	TRS	T8	54 Ga.	Round	50	96817A413	00000


									6	1.5	5	TRS	T8	54 Ga.	Round	25	96817A414	00000
									8	1.5	5	TRS	T8	54 Ga.	Round	25	96817A415	0000
									10	1.5	5	TRS	T8	54 Ga.	Round	50	96817A416	00000
									12	1.5	5	TRS	T8	54 Ga.	Round	50	96817A417	00000




											M3 Screw Size

											5	2.1	6	TRS	T10	52 Ga.	Round	50	96817A418	0000


											6	2.1	6	TRS	T10	52 Ga.	Round	50	96817A419	00000
											8	2.1	6	TRS	T10	52 Ga.	Round	50	96817A421	00000
											10	2.1	6	TRS	T10	52 Ga.	Round	50	96817A422	00000
											12	2.1	6	TRS	T10	52 Ga.	Round	50	96817A423	00000




											M3.5 Screw Size

	10	2.4									7	TRS	T10	50 Ga.	Round	25	96817A424	0000


	12	2.4									7	TRS	T10	50 Ga.	Round	25	96817A425	0000
	14	2.4									7	TRS	T10	50 Ga.	Round	25	96817A426	0000




											M4 Screw Size

			8	2.6							8	TRS	T20	45 Ga.	Round	25	96817A427	0000


			10	2.6							8	TRS	T20	45 Ga.	Round	25	96817A428	0000
			12	2.6							8	TRS	T20	45 Ga.	Round	25	96817A429	0000
			14	2.6							8	TRS	T20	45 Ga.	Round	25	96817A431	0000




											M5 Screw Size

					10	3.3					10	TRS	T20	38 Ga.	Round	25	96817A432	00000


					12	3.3					10	TRS	T20	38 Ga.	Round	25	96817A433	00000

Stainless Steel Torx Plus Rounded Head Thread-Forming Screws for Plastic


	Tri-Lobe Shank Cross Section

Neither moisture nor a heavy hand can damage these screws. The deep, six-lobe recess withstands even more torque than a Torx drive to prevent slipping as you install screws in plastic. They press threads into molded or cast holes and won’t crack or distort the material. Use them to fasten plastic components, enclosures, and panels. The rounded head creates a finished look.

Length is measured from under the head.

18-8 Stainless Steel—The choice for wet and outdoor environments, these screws resist rust. However, they won't hold up to the harsh chemicals that 316 stainless steel can.

Tri-Lobe—The tri-lobular shank forms threads in thermoplastics such as polypropylene and ABS. These screws displace material to create a tight fit that resists vibration and prevents backing out. Because the shank isn't round, the diameter will vary slightly depending on where you measure it. They're comparable to Plastite screws.

		Head, mm
	Lg., mm	Dia.	Ht.	Tapping Screw Type	Drive Size	Drill Bit Size	Shank Cross Section	Pkg. Qty.		Pkg.
18-8 Stainless Steel







				M1.59 Screw Size

				2	2.95	1.12	TRS	IP5, T5	54 Ga.	Tri-Lobe	50	99397A006	000000


				3	2.95	1.12	TRS	IP5, T5	54 Ga.	Tri-Lobe	50	99397A009	00000
				4	2.95	1.12	TRS	IP5, T5	54 Ga.	Tri-Lobe	50	99397A012	00000
				5	2.95	1.12	TRS	IP5, T5	54 Ga.	Tri-Lobe	50	99397A015	00000
				6	2.95	1.12	TRS	IP5, T5	54 Ga.	Tri-Lobe	50	99397A018	00000
				8	2.95	1.12	TRS	IP5, T5	54 Ga.	Tri-Lobe	50	99397A022	00000




						M1.91 Screw Size

						3	4	1.6	TRS	IP6, T6	51 Ga.	Tri-Lobe	50	99397A061	00000


						4	4	1.6	TRS	IP6, T6	51 Ga.	Tri-Lobe	50	99397A064	00000
						5	4	1.6	TRS	IP6, T6	51 Ga.	Tri-Lobe	50	99397A066	00000
						6	4	1.6	TRS	IP6, T6	51 Ga.	Tri-Lobe	50	99397A068	00000
						8	4	1.6	TRS	IP6, T6	51 Ga.	Tri-Lobe	50	99397A072	00000
						10	4	1.6	TRS	IP6, T6	51 Ga.	Tri-Lobe	50	99397A074	00000
						12	4	1.6	TRS	IP6, T6	51 Ga.	Tri-Lobe	50	99397A077	00000




								M2.26 Screw Size

								4	4	1.6	TRS	IP6, T6	5/64"	Tri-Lobe	50	99397A182	00000


								5	4	1.6	TRS	IP6, T6	5/64"	Tri-Lobe	50	99397A185	00000
								6	4	1.6	TRS	IP6, T6	5/64"	Tri-Lobe	50	99397A187	00000
								8	4	1.6	TRS	IP6, T6	5/64"	Tri-Lobe	50	99397A189	00000
								10	4	1.6	TRS	IP6, T6	5/64"	Tri-Lobe	50	99397A192	00000
								12	4	1.6	TRS	IP6, T6	5/64"	Tri-Lobe	50	99397A195	00000




										M2.63 Screw Size

										4	5	2.1	TRS	IP8, T8	43 Ga.	Tri-Lobe	50	99397A344	00000


										5	5	2.1	TRS	IP8, T8	43 Ga.	Tri-Lobe	50	99397A347	00000
										6	5	2.1	TRS	IP8, T8	43 Ga.	Tri-Lobe	50	99397A349	00000
										8	5	2.1	TRS	IP8, T8	43 Ga.	Tri-Lobe	50	99397A351	00000
										10	5	2.1	TRS	IP8, T8	43 Ga.	Tri-Lobe	50	99397A354	00000
										12	5	2.1	TRS	IP8, T8	43 Ga.	Tri-Lobe	50	99397A356	00000
										14	5	2.1	TRS	IP8, T8	43 Ga.	Tri-Lobe	50	99397A359	00000




	M3.12 Screw Size

	4										5.6	2.4	TRS	IP10, T10	37 Ga.	Tri-Lobe	50	99397A433	00000


	5	5.6									2.4	TRS	IP10, T10	37 Ga.	Tri-Lobe	50	99397A436	00000
	6	5.6	2.4								TRS	IP10, T10	37 Ga.	Tri-Lobe	50	99397A438	00000
	8	5.6	2.4								TRS	IP10, T10	37 Ga.	Tri-Lobe	50	99397A441	00000
	10	5.6	2.4								TRS	IP10, T10	37 Ga.	Tri-Lobe	50	99397A445	00000
	12	5.6	2.4								TRS	IP10, T10	37 Ga.	Tri-Lobe	50	99397A448	00000
	14	5.6	2.4								TRS	IP10, T10	37 Ga.	Tri-Lobe	50	99397A450	00000




			M3.63 Screw Size

			6								7	2.6	TRS	IP15, T15	1/8"	Tri-Lobe	50	99397A480	00000


			8	7							2.6	TRS	IP15, T15	1/8"	Tri-Lobe	50	99397A482	00000
			10	7	2.6						TRS	IP15, T15	1/8"	Tri-Lobe	50	99397A484	00000
			12	7	2.6						TRS	IP15, T15	1/8"	Tri-Lobe	50	99397A486	00000
			14	7	2.6						TRS	IP15, T15	1/8"	Tri-Lobe	50	99397A489	00000




					M4.55 Screw Size

					6						8	3.1	TRS	IP20, T20	23 Ga.	Tri-Lobe	50	99397A758	00000


					8						8	3.1	TRS	IP20, T20	23 Ga.	Tri-Lobe	50	99397A761	00000
					10						8	3.1	TRS	IP20, T20	23 Ga.	Tri-Lobe	50	99397A764	00000
					12						8	3.1	TRS	IP20, T20	23 Ga.	Tri-Lobe	50	99397A767	00000
					14	8					3.1	TRS	IP20, T20	23 Ga.	Tri-Lobe	50	99397A770	00000
					16	8	3.1				TRS	IP20, T20	23 Ga.	Tri-Lobe	50	99397A772	00000

Stainless Steel Phillips Flat Head Thread-Forming Screws for Plastic


	Round Shank Cross Section

These corrosion-resistant screws thread into plastic components, enclosures, and panels with countersunk holes. The head is flat on top and beveled underneath to sit flush with surfaces. The Phillips drive handles enough torque to keep drivers from slipping.

Length is measured from the top of the head.

18-8 Stainless Steel—The choice for wet and outdoor environments, these screws resist rust. However, they won't hold up to the harsh chemicals that 316 stainless steel can.

		Head, mm
	Lg., mm	Dia.	Ht.	Tapping Screw Type	Drive Size	Countersink Angle	Flat Head Profile	Drill Bit Size	Shank Cross Section	Pkg. Qty.		Pkg.
18-8 Stainless Steel







				M1.6 Screw Size

				5	3	0.96	TRS	No. 0	90°	Standard	55 Ga.	Round	50	90485A411	000000


				6	3	0.96	TRS	No. 0	90°	Standard	55 Ga.	Round	50	90485A412	00000
				8	3	0.96	TRS	No. 0	90°	Standard	55 Ga.	Round	25	90485A413	0000




						M2 Screw Size

						5	3.8	0.96	TRS	No. 0	90°	Standard	52 Ga.	Round	50	90485A414	0000


						6	3.8	0.96	TRS	No. 0	90°	Standard	52 Ga.	Round	50	90485A415	0000
						8	3.8	0.96	TRS	No. 0	90°	Standard	52 Ga.	Round	50	90485A416	0000
						10	3.8	0.96	TRS	No. 0	90°	Standard	52 Ga.	Round	50	90485A417	00000




								M2.2 Screw Size

								4	3.8	1.2	TRS	No. 0	90°	Standard	50 Ga.	Round	50	90485A418	0000


								5	3.8	1.2	TRS	No. 0	90°	Standard	50 Ga.	Round	50	90485A419	0000
								6	3.8	1.2	TRS	No. 0	90°	Standard	50 Ga.	Round	100	90485A421	00000
								8	3.8	1.2	TRS	No. 0	90°	Standard	50 Ga.	Round	100	90485A422	00000
								12	3.8	1.2	TRS	No. 0	90°	Standard	50 Ga.	Round	100	90485A424	00000
								16	3.8	1.2	TRS	No. 0	90°	Standard	50 Ga.	Round	50	90485A426	0000




										M2.5 Screw Size

										5	4.7	1.7	TRS	No. 1	90°	Standard	45 Ga.	Round	50	90485A428	0000


										6	4.7	1.7	TRS	No. 1	90°	Standard	45 Ga.	Round	100	90485A429	00000
										8	4.7	1.7	TRS	No. 1	90°	Standard	45 Ga.	Round	100	90485A431	00000
										10	4.7	1.7	TRS	No. 1	90°	Standard	45 Ga.	Round	100	90485A432	00000
										12	4.7	1.7	TRS	No. 1	90°	Standard	45 Ga.	Round	100	90485A433	00000
										14	4.7	1.7	TRS	No. 1	90°	Standard	45 Ga.	Round	50	90485A434	00000
										16	4.7	1.7	TRS	No. 1	90°	Standard	45 Ga.	Round	50	90485A435	0000
										18	4.7	1.7	TRS	No. 1	90°	Standard	45 Ga.	Round	50	90485A436	00000
										20	4.7	1.7	TRS	No. 1	90°	Standard	45 Ga.	Round	50	90485A437	00000




												M3 Screw Size

												5	5.5	1.8	TRS	No. 1	90°	Standard	41 Ga.	Round	50	90485A438	0000


6	5.5											1.8	TRS	No. 1	90°	Standard	41 Ga.	Round	50	90485A439	00000
8	5.5											1.8	TRS	No. 1	90°	Standard	41 Ga.	Round	100	90485A441	00000
10	5.5											1.8	TRS	No. 1	90°	Standard	41 Ga.	Round	100	90485A442	00000
12	5.5	1.8										TRS	No. 1	90°	Standard	41 Ga.	Round	100	90485A443	00000
14	5.5	1.8	TRS									No. 1	90°	Standard	41 Ga.	Round	100	90485A444	00000
16	5.5	1.8	TRS									No. 1	90°	Standard	41 Ga.	Round	50	90485A445	0000
20	5.5	1.8	TRS									No. 1	90°	Standard	41 Ga.	Round	50	90485A447	0000
25	5.5	1.8	TRS									No. 1	90°	Standard	41 Ga.	Round	50	90485A448	00000
30	5.5	1.8	TRS									No. 1	90°	Standard	41 Ga.	Round	25	90485A449	0000




		M3.5 Screw Size

		8	7.3	2.5								TRS	No. 2	90°	Standard	34 Ga.	Round	100	90485A451	00000


		10	7.3	2.5	TRS							No. 2	90°	Standard	34 Ga.	Round	50	90485A452	0000
		12	7.3	2.5	TRS							No. 2	90°	Standard	34 Ga.	Round	50	90485A453	0000
		14	7.3	2.5	TRS							No. 2	90°	Standard	34 Ga.	Round	50	90485A454	0000
		16	7.3	2.5	TRS							No. 2	90°	Standard	34 Ga.	Round	50	90485A455	0000
		18	7.3	2.5	TRS							No. 2	90°	Standard	34 Ga.	Round	50	90485A456	00000
		25	7.3	2.5	TRS							No. 2	90°	Standard	34 Ga.	Round	50	90485A458	00000




				M4 Screw Size

				8	8.4	2.9	TRS					No. 2	90°	Standard	30 Ga.	Round	50	90485A463	0000


				10	8.4	2.9	TRS					No. 2	90°	Standard	30 Ga.	Round	50	90485A464	0000
				12	8.4	2.9	TRS					No. 2	90°	Standard	30 Ga.	Round	50	90485A465	00000
				14	8.4	2.9	TRS					No. 2	90°	Standard	30 Ga.	Round	50	90485A466	00000
				16	8.4	2.9	TRS					No. 2	90°	Standard	30 Ga.	Round	50	90485A467	00000
				18	8.4	2.9	TRS					No. 2	90°	Standard	30 Ga.	Round	50	90485A468	00000
				20	8.4	2.9	TRS					No. 2	90°	Standard	30 Ga.	Round	25	90485A469	0000
				25	8.4	2.9	TRS					No. 2	90°	Standard	30 Ga.	Round	25	90485A471	00000
				30	8.4	2.9	TRS					No. 2	90°	Standard	30 Ga.	Round	25	90485A472	00000
				35	8.4	2.9	TRS					No. 2	90°	Standard	30 Ga.	Round	10	90485A473	0000




						M5 Screw Size

						10	9.3	2.9	TRS			No. 2	90°	Standard	21 Ga.	Round	25	90485A476	00000


						12	9.3	2.9	TRS			No. 2	90°	Standard	21 Ga.	Round	25	90485A477	00000
						14	9.3	2.9	TRS			No. 2	90°	Standard	21 Ga.	Round	25	90485A478	00000
						16	9.3	2.9	TRS			No. 2	90°	Standard	21 Ga.	Round	25	90485A479	00000
						20	9.3	2.9	TRS			No. 2	90°	Standard	21 Ga.	Round	25	90485A482	00000
						25	9.3	2.9	TRS			No. 2	90°	Standard	21 Ga.	Round	10	90485A483	0000
						30	9.3	2.9	TRS			No. 2	90°	Standard	21 Ga.	Round	10	90485A484	0000

Stainless Steel Torx Flat Head Thread-Forming Screws for Plastic

Round

Shank

Cross

Section

Drivers won’t slip out of these corrosion-resistant screws, which form threads in plastic to secure components with countersunk holes. Also known as star drive, the six-lobe Torx recess withstands more torque than slotted, Phillips, or hex drives. Screws press threads into molded or cast holes without cracking or distorting the material. Use them to fasten plastic components, enclosures, and panels. Their flat, beveled head sits flush in holes.

Length is measured from the top of the head.

18-8 Stainless Steel—The choice for wet and outdoor environments, these screws resist rust. However, they won't hold up to the harsh chemicals that 316 stainless steel can.

		Head, mm
	Lg., mm	Dia.	Ht.	Tapping Screw Type	Drive Size	Countersink Angle	Flat Head Profile	Drill Bit Size	Shank Cross Section	Pkg. Qty.		Pkg.
18-8 Stainless Steel







				M1.6 Screw Size

				5	3	0.96	TRS	T5	90°	Standard	55 Ga.	Round	50	95893A161	000000


				6	3	0.96	TRS	T5	90°	Standard	55 Ga.	Round	50	95893A162	00000
				8	3	0.96	TRS	T5	90°	Standard	55 Ga.	Round	50	95893A163	00000




						M2 Screw Size

						5	3.8	0.96	TRS	T6	90°	Standard	52 Ga.	Round	50	95893A164	00000


						6	3.8	0.96	TRS	T6	90°	Standard	52 Ga.	Round	50	95893A165	00000
						8	3.8	0.96	TRS	T6	90°	Standard	52 Ga.	Round	50	95893A166	00000
						10	3.8	0.96	TRS	T6	90°	Standard	52 Ga.	Round	25	95893A167	0000




								M2.2 Screw Size

								5	3.8	1.2	TRS	T6	90°	Standard	50 Ga.	Round	50	95893A168	0000


								6	3.8	1.2	TRS	T6	90°	Standard	50 Ga.	Round	50	95893A169	0000
								8	3.8	1.2	TRS	T6	90°	Standard	50 Ga.	Round	100	95893A171	00000
								10	3.8	1.2	TRS	T6	90°	Standard	50 Ga.	Round	100	95893A172	00000
								12	3.8	1.2	TRS	T6	90°	Standard	50 Ga.	Round	50	95893A173	0000
								14	3.8	1.2	TRS	T6	90°	Standard	50 Ga.	Round	50	95893A174	00000
								16	3.8	1.2	TRS	T6	90°	Standard	50 Ga.	Round	50	95893A175	00000




										M2.5 Screw Size

										5	4.7	1.7	TRS	T8	90°	Standard	45 Ga.	Round	50	95893A177	0000


										6	4.7	1.7	TRS	T8	90°	Standard	45 Ga.	Round	100	95893A178	00000
										8	4.7	1.7	TRS	T8	90°	Standard	45 Ga.	Round	100	95893A179	00000
										10	4.7	1.7	TRS	T8	90°	Standard	45 Ga.	Round	100	95893A181	00000
										12	4.7	1.7	TRS	T8	90°	Standard	45 Ga.	Round	50	95893A182	0000
										14	4.7	1.7	TRS	T8	90°	Standard	45 Ga.	Round	50	95893A183	00000
										16	4.7	1.7	TRS	T8	90°	Standard	45 Ga.	Round	50	95893A184	00000
										18	4.7	1.7	TRS	T8	90°	Standard	45 Ga.	Round	50	95893A185	00000
										20	4.7	1.7	TRS	T8	90°	Standard	45 Ga.	Round	50	95893A186	00000




												M3 Screw Size

5												5.5	1.8	TRS	T8	90°	Standard	41 Ga.	Round	50	95893A187	0000


6	5.5											1.8	TRS	T8	90°	Standard	41 Ga.	Round	50	95893A188	0000
8	5.5											1.8	TRS	T8	90°	Standard	41 Ga.	Round	100	95893A189	00000
10	5.5	1.8										TRS	T8	90°	Standard	41 Ga.	Round	100	95893A191	00000
12	5.5	1.8	TRS									T8	90°	Standard	41 Ga.	Round	100	95893A192	00000
14	5.5	1.8	TRS									T8	90°	Standard	41 Ga.	Round	50	95893A193	00000
16	5.5	1.8	TRS									T8	90°	Standard	41 Ga.	Round	50	95893A194	0000
18	5.5	1.8	TRS									T8	90°	Standard	41 Ga.	Round	50	95893A195	00000
20	5.5	1.8	TRS									T8	90°	Standard	41 Ga.	Round	50	95893A196	00000
25	5.5	1.8	TRS									T8	90°	Standard	41 Ga.	Round	25	95893A197	0000
30	5.5	1.8	TRS									T8	90°	Standard	41 Ga.	Round	25	95893A198	0000




		M3.5 Screw Size

		8	7.3	2.5	TRS							T15	90°	Standard	34 Ga.	Round	50	95893A199	00000


		10	7.3	2.5	TRS							T15	90°	Standard	34 Ga.	Round	50	95893A221	0000
		12	7.3	2.5	TRS							T15	90°	Standard	34 Ga.	Round	50	95893A222	0000
		16	7.3	2.5	TRS							T15	90°	Standard	34 Ga.	Round	50	95893A224	00000
		25	7.3	2.5	TRS							T15	90°	Standard	34 Ga.	Round	25	95893A227	00000




				M4 Screw Size

				8	8.4	2.9	TRS					T20	90°	Standard	30 Ga.	Round	25	95893A232	0000


				10	8.4	2.9	TRS					T20	90°	Standard	30 Ga.	Round	25	95893A233	0000
				12	8.4	2.9	TRS					T20	90°	Standard	30 Ga.	Round	25	95893A234	0000
				14	8.4	2.9	TRS					T20	90°	Standard	30 Ga.	Round	25	95893A235	0000
				16	8.4	2.9	TRS					T20	90°	Standard	30 Ga.	Round	25	95893A236	0000
				18	8.4	2.9	TRS					T20	90°	Standard	30 Ga.	Round	25	95893A237	0000
				20	8.4	2.9	TRS					T20	90°	Standard	30 Ga.	Round	25	95893A238	0000
				25	8.4	2.9	TRS					T20	90°	Standard	30 Ga.	Round	25	95893A239	00000
				30	8.4	2.9	TRS					T20	90°	Standard	30 Ga.	Round	25	95893A241	00000
				35	8.4	2.9	TRS					T20	90°	Standard	30 Ga.	Round	10	95893A242	0000
				40	8.4	2.9	TRS					T20	90°	Standard	30 Ga.	Round	10	95893A243	0000




						M5 Screw Size

						10	9.3	2.9	TRS			T20	90°	Standard	21 Ga.	Round	25	95893A245	0000


						12	9.3	2.9	TRS			T20	90°	Standard	21 Ga.	Round	25	95893A246	0000
						14	9.3	2.9	TRS			T20	90°	Standard	21 Ga.	Round	25	95893A247	0000
						16	9.3	2.9	TRS			T20	90°	Standard	21 Ga.	Round	25	95893A248	00000
						18	9.3	2.9	TRS			T20	90°	Standard	21 Ga.	Round	25	95893A249	00000
						20	9.3	2.9	TRS			T20	90°	Standard	21 Ga.	Round	25	95893A261	00000
						25	9.3	2.9	TRS			T20	90°	Standard	21 Ga.	Round	10	95893A262	0000
						30	9.3	2.9	TRS			T20	90°	Standard	21 Ga.	Round	10	95893A263	0000