These rods are precision ground and held to a strict straightness tolerance, so they're ready for turning in a lathe.

Also known as mild steel, low-carbon steel is easy to machine, form, and weld. It's widely fabricated into parts that don’t require high strength.

With a thickness that's precision ground to a tight tolerance, these bars are sometimes called flat stock.

Also known as mild steel, low-carbon steel is easy to machine, form, and weld. It's widely fabricated into parts that don’t require high strength.

Ready for turning in a lathe, these rods are precision ground and held to a strict straightness tolerance.

A lead-free alternative to 12L14, 1215 carbon steel contains the same amount of sulfur and phosphorus for excellent machinability. It is often used for shaft couplings, studs, and pins.

Stronger than low-carbon steel with equally good machinability, 1045 carbon steel is widely used for bolts, studs, and shafts.

The chrome plating on these rods increases corrosion resistance.

Often called ETD-150, these rods are made from a modified version of 4140 alloy steel and have been drawn at high temperatures for excellent strength.

Ready for turning in a lathe, these rods are precision ground to a tight diameter tolerance.

Precision ground and held to a strict straightness tolerance, these rods are ready for turning in your lathe.

This material has tighter tolerances than standard 304 stainless steel.

Widely used for fabricating fittings and fasteners, 303 stainless steel machines quickly without sticking to cutting tools.

Each piece is precision ground to offer tighter tolerances than standard 17-4 PH stainless steel.

The addition of molybdenum gives 316 stainless steel excellent corrosion resistance. Use it in a variety of marine and chemical-processing applications.

Hardened for superior wear resistance, these rods are precision ground to a tight diameter tolerance so they’re ready for turning in a lathe.

Mount these externally threaded shafts into tapped holes rather than using a shaft support, or attach a hex nut, shaft collar, or other threaded accessory.

For your compliance and quality assurance needs, these shafts come with a material certificate with a traceable lot number.

These shafts include a support rail for a stable setup that eliminates bending and prevents linear bearings from rotating.

Combine with a machine key to transmit torque to gears, sprockets, and other power transmission components.

Thread these shafts into a tapped hole to support idler sprockets and pulleys in tensioning applications. They have a retaining-ring groove, retaining ring, and spacers to position your component and hold it in place.

Good for hydraulic systems, machine tools, and other high-torque applications, these shafts have teeth that transmit high rotational loads.

From one compact system, transmit linear or rotary motion or both at once (sometimes called spiral motion). Because of these different motions, these ball screw/splines and bearings create efficient, fluid movements in complex automated applications, such as pick-and-place robots.

Class 12.9 rods are about 20% stronger than Class 10.9 threaded rods and are for use in heavy machinery.

About half the strength of medium-strength steel threaded rods, use these metric fine-thread rods for light duty hanging, mounting, and fastening.

Made of Grade B7 steel, the tensile strength of these threaded rods is one and a half times higher than low-strength steel threaded rods. They also meet the pressure and temperature requirements of ASTM A193 and are often used to secure pressure tanks, valves, and flanges.

An economical alternative to Grade B7 and Grade B16 threaded rods, these metric Class 8.8 rods are suitable for fastening most machinery and equipment.

These metric 316 stainless steel threaded rods are more corrosion resistant than 18-8 and 410 stainless steel threaded rods and have excellent resistance to chemicals and salt water.

Also known as tap-end, fixture, and setup studs, these studs have Class SK6 friction-fit threads on one end to resist loosening and Class 6g standard threads on the other end for attaching a nut.

These steel studs are zinc plated to resist corrosion in wet environments.

Pass these studs through a hole and weld them in place.

Stick these studs to nearly any surface for a strong bond and a watertight seal.

These metric 316 stainless steel studs have excellent resistance to chemicals and salt water. Also known as hanger bolts, use them to hang, mount, and fasten parts to wood structures.

These metric lead screws and nuts have broad, square threads that are well suited for quick assembly, high clamping forces, and lifting and lowering heavy objects. They're commonly found in hand-powered clamps, vises, grates, doors, and work tables.

Multiple thread channels (also known as thread starts) create faster linear travel than lead screws with a single thread start.