Filter by
Vise Type
Jaw Style
Jaw Material
Material
Performance
Workpiece Diameter
DFARS Specialty Metals
Export Control Classification Number (ECCN)
Groove Orientation
Machinable Milling-Machine Vise Jaws
 |
Made from unhardened metal, machine these jaws to fit the contours and curves of your workpiece. They have an industry standard hole pattern that fits most manufacturers' vises, including Kurt, Chick, TE-CO, Toolex, and Palmgren.
1018 Low-Carbon Steel Jaw—1018 low-carbon steel jaws are more durable than 6061 aluminum.
Jaw | Mounting | 6061 Aluminum Jaw | 1018 Low-Carbon Steel Jaw | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Wd. | Ht. | Thk. | Thk. Tolerance | Fasteners Included | Hole Dia. | Hole Ctr.-to-Ctr. | For Mounting Screw Size | Pair | Pair | ||||
Flat Jaw | |||||||||||||
| 4" | 1 1/2" | 1" | -0.002" to 0.002" | No | 0.409" | 2 1/2" | 3/8" | 1005N23 | 000000 | 1005N36 | 000000 | ||
| 4" | 1 1/2" | 1.5" | -0.002" to 0.002" | No | 0.409" | 2 1/2" | 3/8" | 1005N27 | 00000 | 1005N37 | 00000 | ||
| 6" | 2" | 1" | -0.002" to 0.002" | No | 0.532" | 3 7/8" | 1/2" | 1005N28 | 00000 | 1005N38 | 00000 | ||
| 6" | 2" | 1.25" | -0.002" to 0.002" | No | 0.532" | 3 7/8" | 1/2" | 1005N24 | 00000 | 1005N39 | 00000 | ||
| 6" | 2" | 1.5" | -0.002" to 0.002" | No | 0.532" | 3 7/8" | 1/2" | 1005N29 | 00000 | 1005N41 | 000000 | ||
| 6" | 2" | 2" | -0.002" to 0.002" | No | 0.532" | 3 7/8" | 1/2" | 1005N31 | 00000 | 1005N42 | 000000 | ||
| 6" | 3" | 2" | -0.002" to 0.002" | No | 0.532" | 3 7/8" | 1/2" | 1005N32 | 000000 | 1005N43 | 000000 | ||
| 8" | 2" | 1.5" | -0.002" to 0.002" | No | 0.532" | 3 7/8" | 1/2" | 1005N33 | 00000 | 1005N44 | 000000 | ||
| 8" | 2 1/2" | 1" | -0.002" to 0.002" | No | 0.654" | 4 3/4" | 5/8" | 1005N35 | 00000 | 1005N46 | 000000 | ||
| 8" | 2 1/2" | 2" | -0.002" to 0.002" | No | 0.654" | 4 3/4" | 5/8" | 1005N25 | 000000 | 1005N47 | 000000 | ||
| 10" | 2" | 1.5" | -0.002" to 0.002" | No | 0.532" | 3 7/8" | 1/2" | 1005N34 | 00000 | 1005N45 | 000000 | ||
Adjustable-Angle Milling-Machine Vise Jaws
 |  |
Arrange the included pins in a series of holes to position a part at any angle and hold odd-shaped parts securely.
Jaw | Pin | Mounting | Steel Jaw | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Wd. | Ht. | Thk. | Thk. Tolerance | Dia. | Dia. Tolerance | Workholding Angle | Fasteners Included | Hole Dia. | Hole Ctr.-to-Ctr. | For Mounting Screw Size | Includes | Pair | |||
Adjustable-Pin Jaw | |||||||||||||||
| 6" | 1 3/4" | 0.725" | -0.0008" to 0.0008" | 1/4" | -0.0007" to 0.0007" | 5°, 10°, 15°, 20°, 25°, 30°, 45° | No | 17/32" | 3 7/8" | 1/2" | Four 7/8" Lg. Pins Three 1 19/32" Lg. Pins Three 2 9/32" Lg. Pins Three 3" Lg. Pins | 1005N26 | 0000000 | ||
Hardened Milling-Machine Vise Jaws
 |
Hardened for wear resistance, these steel jaws are replacements for the ones that come installed on your vise. They have an industry standard hole pattern that fits most manufacturers' vises, including Kurt, Chick, TE-CO, Toolex, and Palmgren.
Jaw | Mounting | Steel Jaw | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
Wd. | Ht. | Thk. | Thk. Tolerance | Fasteners Included | Hole Dia. | Hole Ctr.-to-Ctr. | For Mounting Screw Size | Pair | |||
Flat Jaw | |||||||||||
| 4" | 1 1/4" | 0.547" | -0.0005" to 0.0005" | No | 13/32" | 2 1/2" | 3/8" | 8474A21 | 0000000 | ||
| 6" | 1 3/4" | 0.725" | -0.0005" to 0.0005" | No | 17/32" | 3 7/8" | 1/2" | 8474A22 | 000000 | ||
| 8" | 2 3/16" | 1.105" | -0.0005" to 0.0005" | No | 21/32" | 4 3/4" | 5/8" | 8474A23 | 000000 | ||
Quick-Change Milling-Machine Vise Jaws
 |
Significantly cut down on jaw changeover time—this two-part system lets you swap out jaws in less than 30 seconds. Mount the jaw plates to the vise and slide the dovetailed jaw stock in and out of the plates.
Jaw Plates
 |
Jaw plates have set screws on top for securing the jaw stock. Tighten using the included T-handle key. Plates have an industry standard hole pattern that fits most manufacturers' vises, including Kurt, Chick, TE-CO, Toolex, and Palmgren.
Jaw | Mounting | Steel Jaw | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
Wd. | Ht. | Thk. | Thk. Tolerance | Fasteners Included | Hole Dia. | Hole Ctr.-to-Ctr. | For Mounting Screw Size | Includes | Pair | |||
Flat Jaw | ||||||||||||
| 6" | 1 3/4" | 0.688" | -0.0005" to 0.0005" | Yes | 17/32" | 3 7/8" | 1/2" | 1/4" Hex T-Handle Key | 2406N1 | 0000000 | ||
Hardened Jaw Stock
 |
Jaw | Steel Jaw | ||||||
|---|---|---|---|---|---|---|---|
Wd. | Ht. | Thk. | Thk. Tolerance | Pair | |||
Flat Jaw | |||||||
| 6" | 1 11/16" | 0.5" | -0.0005" to 0.0005" | 2406N2 | 0000000 | ||
Milling-Machine Vise Jaws for Round Material
 |  |
Vertical Groove | Vertical and Horizontal Grooves |
The V-shaped recess holds round material securely for machining. Place one of these jaws on one side of your vise and use a flat jaw on the other. They have an industry standard hole pattern that fits most manufacturers' vises, including Kurt, Chick, TE-CO, Toolex, and Palmgren.
Jaws with vertical and horizontal grooves holds 1/2" to 1 1/4" dia. workpieces vertically and 1/4" to 1/2" dia. workpieces horizontally.
Vertical Groove—Jaws with vertical groove holds 3/4" to 1 3/4" dia. workpieces.
Jaw | For Workpiece Dia. | Mounting | Steel Jaw | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Wd. | Ht. | Thk. | Thk. Tolerance | Vertical | Horizontal | Fasteners Included | Hole Dia. | Hole Ctr.-to-Ctr. | For Mounting Screw Size | Each | |||
Grooved Jaw | |||||||||||||
Vertical Groove | |||||||||||||
| 6" | 1 3/4" | 1.26" | -0.005" to 0.005" | 3/4" to 1 3/4" | — | No | 17/32" | 3 7/8" | 1/2" | 2579N1 | 0000000 | ||
Vertical and Horizontal Grooves | |||||||||||||
| 6" | 1 3/4" | 1" | -0.005" to 0.005" | 1/2" to 1 1/4" | 1/4" to 1/2" | No | 17/32" | 3 7/8" | 1/2" | 2579N2 | 000000 | ||
Slotted Milling-Machine Vise Jaws
 |
Hold workpieces steady with these vise jaws—they work with slot-mount workstops so you can quickly position, adjust, and change out your workpieces. Using jaws and workstops together keeps the workpiece from slipping, and gives you more control over the position than jaws alone. Slide your workstop into a slot on either the top or the bottom jaw and tighten with a screw. One slot is closer to the jaw face than the other to give you more positioning options. These jaws have industry-standard mounting hole patterns to match most vises, including those made by Kurt, Chick, TE-CO, Toolex, and Palmgren.
Milling-Machine Vise Jaws with Changeable Parallels
 |
Quickly move parallels in and out of these jaws and raise your workpiece within the vise. Choose jaws and the mating pair or set of parallels. Mount jaws to the vise, slide the parallels in place, and then rest your workpiece on top to allow more clearance for cutting tools.
