Make controlled cuts in drywall, fiberglass, and laminate.

Originally designed to cut rings off of fingers, these cutters slice through thin metal without damaging nearby surfaces. Slide the blade guard under the material you’re cutting, then turn the cutting wheel while squeezing the handles.

Plunge these saws right into your material to make small, detailed cuts. Also known as cut-out tools, these saws are often used to make cutouts in drywall for electrical boxes. They weigh under three pounds and can be used comfortably with one hand for long periods. A dust blower clears debris from your cut line to keep it visible. Attach a cutoff wheel to make straight cuts.

Make small, detailed cuts anywhere on your jobsite with these portable saws. They deliver the same power as electric spiral saws but don’t require an outlet nearby. Also known as cut-out tools, these saws are often used to make cutouts in drywall for electrical boxes. Because they weigh under two pounds, they can be used comfortably with one hand for extended periods. Rechargeable batteries keep them powered wherever you need them. A brushless motor optimizes battery usage, so these saws run longer on a single charge. It also enhances longevity—they run cool and have few moving parts that require maintenance.

Use the tool-free bit change system to swap out dull bits without a wrench. An LED light brightens your workpiece, so you can see your cutting line clearly.

Some saws include rechargeable batteries. For saws where they’re not included, see DeWalt batteries and chargers.

Hoods—Connect a dust hood (sold separately) to a dust collector to keep your work area cleaner and improve air quality.

These economy cutoff saws have a lightweight nylon handle and are for less prolonged use than our medium duty air-powered cutoff saws. Easy to carry and portable, you can take these saws where you need them. They come in handy to cut through materials that have already been installed, such as pipe or tubing. Powered by air, these saws have more consistent power than battery-powered saws, so they’re less prone to bogging down and stalling when cutting. Use abrasive wheels with these saws.

Warning: Use wheels that have a greater rpm rating than the no-load rpm of your tool.

A higher air consumption rating gives these saws more power and allows them to cut for longer periods than light duty cutoff saws. Powered by air, they have more consistent power than battery-powered saws, so they’re less likely to stall out as you cut dense material. Use them for general purpose cutting, such as cutting through bolts and trimming excess metal from installed parts. They’re portable and have a durable composite handle, so you can move them where needed. Use them with abrasive wheels.

Warning: Use wheels that have a greater rpm rating than the no-load rpm of your tool.

Use these wheels to cut through metal such as aluminum, iron, stainless steel, and steel. They are reinforced with a layer of fiberglass mesh.

Warning: Use wheels that have a greater rpm rating than the no-load rpm of your tool.

The right-angle position of this saw's blade makes it suitable for both cutting and grinding with an abrasive wheel.

Warning! Use wheels that have a greater rpm rating than the no-load rpm of your tool.

These steel wheels have a diamond grit edge for making cuts in abrasive materials such as ceramic and tile.

Make cuts in hard, brittle materials such as firebrick, stone, and concrete. These wheels have a layer of fiberglass mesh reinforcement.

Make cuts in most metal, including aluminum, iron, stainless steel, and steel. These wheels have a layer of fiberglass mesh reinforcement.

Create stable, controlled cuts in tile or grout with a guide and bit that allow maximum visibility.

The loose weave of the reinforcement material means more of the abrasive grain contacts the metal as you're cutting for a faster cut than standard cutoff wheels. These wheels are reinforced with fiberglass mesh, so they're strong enough to make quick, burr-free cuts in metals such as iron, stainless steel, and steel. However, the loose weave makes these wheels more prone to breaking and they won't last as long as standard cutoff wheels.

Warning: Use wheels that have a greater rpm rating than the no-load rpm of your tool.

Make burr-free cuts in a variety of materials—from rubber to metal to stone. Made from a blend of silicon carbide and aluminum oxide abrasives, these cutoff wheels won’t clog or burn when slicing through nonmetals. They’re often used to cut hard or thick pipe, sheets, and bars to size.

Warning: Use wheels that have a greater rpm rating than the no-load rpm of your tool.

Make cuts in hard, brittle materials such as firebrick, stone, and concrete. These silicon carbide wheels are reinforced with a layer of fiberglass mesh. For wheels with a round/diamond arbor, detach the center piece to expose the diamond shape.

Warning: Use wheels that have a greater rpm rating than the no-load rpm of your tool.

Use these wheels to cut through metal such as aluminum, iron, stainless steel, and steel. They are reinforced with a layer of fiberglass mesh. For wheels with a round/diamond arbor, detach the center piece to expose the diamond shape.

Warning: Use wheels that have a greater rpm rating than the no-load rpm of your tool.

Use these wheels to cut through metal such as iron and steel. They are reinforced with a layer of fiberglass mesh.

Warning: Use wheels that have a greater rpm rating than the no-load rpm of your tool.

Use these wheels to cut through metal such as aluminum, iron, stainless steel, and steel. They are reinforced with a layer of fiberglass mesh. For wheels with a round/diamond arbor, detach the center piece to expose the diamond shape.

Warning: Use wheels that have a greater rpm rating than the no-load rpm of your tool.

These wheels have a blend of aluminum oxide and silicon carbide abrasives for cutting ductile iron. They are reinforced with a layer of fiberglass mesh.

Warning: Use wheels that have a greater rpm rating than the no-load rpm of your tool.

Make cuts in hard, brittle materials such as firebrick, stone, and concrete. These wheels are silicon carbide that is reinforced with a layer of fiberglass mesh.

Warning: Use wheels that have a greater rpm rating than the no-load rpm of your tool.

Use these wheels to cut through metal such as aluminum, iron, stainless steel, and steel. They are reinforced with a layer of fiberglass mesh.

Warning: Use wheels that have a greater rpm rating than the no-load rpm of your tool.