Often used in automation systems such as conveyors and sorters, these cords have plug and socket ends, so they quickly connect and disconnect for maintenance and do not need to be hardwired. Because these cords carry higher currents than micro and mini cords, they can power equipment such as motors, fans, pumps, and automated machine tools. They are shielded to block out interference from nearby equipment. These cords meet UL 2237 and UL 2238, so they can be used in motor branch circuits of industrial machinery. They also meet TC-ER crush and impact requirements for exposed runs in cable carriers. IP rated, they protect against dust, washdowns, and temporary submersion.

Connect these cords to control cabinets and equipment with M29 power receptacles (sold separately).

For technical drawings and 3-D models, click on a part number.

Similar to branches extending from a tree, these cords disperse power from a main power line to run a chain of devices. Power high-amperage fans, pumps, and other machines in motor controls, conveyors, and sorting and packaging systems. All quickly connect and disconnect for easy installation and maintenance.

These cords are UL and C-UL listed, so they meet American and Canadian safety standards. They comply with TC-ER requirements, meaning they withstand being hit and crushed when exposed. An STOOW rating means their inner and outer insulation resist oil and water. IP and NEMA rated when connected, these cords resist corrosion and seal out dust and water from weather and washdowns. They can even be under water for brief periods of time.

Lengthen your power line and reach more devices in your system by adding M22 connectors or M35 cords and connectors. Reducing tees join equipment with M22 connections to equipment with M35 connections.

Add a cap to protect these cords from dust when they’re not in use.

Optional locking clips stop your cord from coming loose when used with equipment that carries high amperage.

For technical drawings and 3-D models, click on a part number.

Often used in computers, small electronics, and electronic prototyping, this cable is very flexible with small gauge wire to handle tight curves in narrow spaces. It withstands continuous motion, so it’s also commonly used around heavy vibration and in automated tasks, including robotics. A braid shield blocks interference from nearby equipment.

Nearly two-thirds the diameter of standard control cable, this cable fits in tight spaces. The modified polyphenylene ether (mPPE) insulation is less than half the weight of the PVC insulation found on standard control cable, yet is more abrasion and cut resistant. Use it to send signal and data to operate, measure, or regulate automated equipment that requires cable to periodically flex and bend. It’s often used with conveyors, CNC machines, and to connect equipment to a control panel. Cable is flame rated VW-1 to meet requirements for preventing the spread of flames based on a timed test with vertically suspended material.

Use unshielded cable in applications where signal interference is not a concern.

Double shielded cable has a layer of braid and foil shielding that provides excellent protection against signal interference from nearby equipment and devices.

For use in tight spaces, this cable has up to a 40% smaller OD than standard continuous-flex cable so it fits in tight spaces. The inner insulation is modified polyphenylene ether (mPPE), making the cable nearly half the weight of standard continuous-flex cable. Often used in automated applications such as robotics and cable carriers, it withstands continuous motion without degrading data or signal transmission.

Bend radius is the point to which the cable will bend without being damaged. It is measured from the center of the bend to the edge of the cable. The smaller the measurement, the tighter the bend.

Nearly half the diameter and up to 40% lighter than standard wire of the same gauge and voltage, this wire fits in tight spaces. Also known as hook-up wire, it’s good for wiring electrical panels and plant floor equipment, or can be used as an alternative to building wire. It’s flame rated VW-1 to meet requirements for preventing the spread of flames, based on a timed test with vertically suspended material.