About Track Rollers
Also known as cam followers, track rollers have a thick outer roller that runs directly on a flat surface.
More
Miniature High-Load Threaded Track Rollers
Despite their size, these rollers handle high radial load capacities without sacrificing speed. They’re often used in robots to guide small movements.
For technical drawings and 3-D models, click on a part number.
Roller, mm | Stud, mm | Thread | Shoulder, mm | Radial Load Cap., lbs. | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Dia. | Wd. | Dia. | Lg. | Size | Pitch, mm | Lg., mm | Dia. | Lg. | Max. Speed, rpm | Static | Dynamic | Max. Temp., °F | Bearing Type | Includes | Each | |
Steel Flat Rollers without Seal | ||||||||||||||||
| 4.5 | 2.5 | 2 | 4 | M2 | 0.4 | 2 | 4.3 | 0.7 | 21,000 | 160 | 170 | 245° | Needle Roller | Mounting Hardware | 0000000 | 0000000 |
| 5 | 4.5 | 2.5 | 5 | M2.5 | 0.45 | 2.5 | 4.8 | 0.7 | 5,000 | 240 | 220 | 175° | Needle Roller | Mounting Hardware | 0000000 | 00000 |
| 6 | 5.5 | 3 | 6 | M3 | 0.5 | 3 | 5.8 | 0.7 | 5,000 | 390 | 230 | 175° | Needle Roller | Mounting Hardware | 0000000 | 00000 |
| 8 | 7 | 4 | 8 | M4 | 0.7 | 4 | 7.7 | 0.7 | 5,000 | 680 | 520 | 175° | Needle Roller | Mounting Hardware | 0000000 | 00000 |
440C Stainless Steel Flat Rollers without Seal | ||||||||||||||||
| 4.5 | 2.5 | 2 | 4 | M2 | 0.4 | 2 | 4.3 | 0.7 | 21,000 | 130 | 135 | 245° | Needle Roller | Mounting Hardware | 0000000 | 000000 |
| 5 | 4.5 | 2.5 | 5 | M2.5 | 0.45 | 2.5 | 4.8 | 0.7 | 5,000 | 240 | 220 | 175° | Needle Roller | Mounting Hardware | 0000000 | 00000 |
| 6 | 5.5 | 3 | 6 | M3 | 0.5 | 3 | 5.8 | 0.7 | 5,000 | 390 | 230 | 175° | Needle Roller | Mounting Hardware | 0000000 | 00000 |
| 8 | 7 | 4 | 8 | M4 | 0.7 | 4 | 7.7 | 0.7 | 5,000 | 680 | 520 | 175° | Needle Roller | Mounting Hardware | 0000000 | 00000 |
Miniature High-Speed Threaded Track Rollers
Built to handle high speeds for their size. These track rollers have an outer ring that supports higher speeds than standard-sized track rollers. They also create less friction than miniature high-load rollers while spinning. You can use these rollers for precise movements in robots or other miniature applications.
For technical drawings and 3-D models, click on a part number.
Roller, mm | Stud, mm | Thread | Shoulder, mm | Radial Load Cap., lbs. | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Dia. | Wd. | Dia. | Lg. | Size | Pitch, mm | Lg., mm | Dia. | Lg. | Max. Speed, rpm | Static | Dynamic | Max. Temp., °F | Bearing Type | Includes | Each | |
Steel Flat Rollers without Seal | ||||||||||||||||
| 5 | 3 | 2.5 | 5 | M2.5 | 0.45 | 2.5 | 4.8 | 0.7 | 33,600 | 75 | 95 | 245° | Needle Roller | Nut | 0000000 | 0000000 |
| 6 | 4 | 3 | 6 | M3 | 0.5 | 3 | 5.8 | 0.7 | 28,000 | 130 | 140 | 245° | Needle Roller | Nut | 0000000 | 000000 |
| 8 | 5 | 4 | 8 | M4 | 0.7 | 4 | 7.7 | 1 | 21,000 | 250 | 250 | 245° | Needle Roller | Nut | 0000000 | 000000 |
440C Stainless Steel Flat Rollers without Seal | ||||||||||||||||
| 4.5 | 2.5 | 2 | 4 | M2 | 0.4 | 2 | 4.3 | 0.7 | 42,000 | 35 | 50 | 230° | Needle Roller | Nut | 0000000 | 000000 |
| 5 | 3 | 2.5 | 5 | M2.5 | 0.45 | 2.5 | 4.8 | 0.7 | 33,600 | 60 | 75 | 245° | Needle Roller | Nut | 0000000 | 000000 |
| 6 | 4 | 3 | 6 | M3 | 0.5 | 3 | 5.8 | 0.7 | 28,000 | 100 | 110 | 245° | Needle Roller | Nut | 0000000 | 000000 |
| 8 | 5 | 4 | 8 | M4 | 0.7 | 4 | 7.7 | 1 | 21,000 | 200 | 200 | 245° | Needle Roller | Nut | 0000000 | 000000 |
Thrust-Load-Rated Corrosion-Resistant Threaded Track Rollers
These rollers are rated to handle radial and thrust (top and side) loads simultaneously. Also known as cam followers, track rollers support loads while guiding and positioning work. Thread the stud directly into a component or secure with a nut for through-hole mounting. All rollers are permanently lubricated and have end seals to retain lubricant and protect rolling elements from dirt and contamination.
303 stainless steel rollers are more corrosion resistant than 440C stainless steel rollers.
For technical drawings and 3-D models, click on a part number.
Roller | Stud | Thread | Shoulder | Radial Load Cap., lbs. | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Dia. | Wd. | Dia. | Lg. | Size | Lg. | Dia. | Lg. | Max. Speed, rpm | Static | Dynamic | Static Thrust Load Cap., lbs. | Max. Temp., °F | Bearing Type | Includes | Each | |
303 Stainless Steel Flat Rollers with Seal | ||||||||||||||||
Slotted Roller Head Drive | ||||||||||||||||
| 3/16" | 13/64" | 3/32" | 1/4" | 2-56 | 1/8" | 1/8" | 1/16" | 1,500 | 15 | 50 | 5 | 245° | Ball | Mounting Hardware | 000000 | 000000 |
| 1/4" | 7/64" | 1/8" | 1/2" | 4-40 | 1/4" | 3/16" | 1/16" | 1,500 | 20 | 60 | 20 | 245° | Ball | Mounting Hardware | 0000000 | 00000 |
| 1/4" | 13/64" | 3/32" | 1/4" | 2-56 | 1/8" | 1/8" | 1/16" | 1,500 | 15 | 50 | 10 | 245° | Ball | Mounting Hardware | 000000 | 00000 |
| 3/8" | 1/8" | 3/16" | 1/2" | 8-32 | 1/4" | 3/8" | 1/16" | 1,500 | 50 | 160 | 50 | 245° | Ball | Mounting Hardware | 0000000 | 00000 |
| 3/8" | 1/4" | 1/8" | 7/16" | 4-40 | 1/4" | 3/16" | 1/16" | 1,500 | 30 | 100 | 20 | 245° | Ball | Mounting Hardware | 0000000 | 00000 |
| 1/2" | 3/16" | 1/4" | 5/8" | 10-32 | 3/8" | 3/8" | 1/16" | 1,500 | 90 | 240 | 80 | 245° | Ball | Mounting Hardware | 0000000 | 00000 |
| 1/2" | 5/16" | 3/16" | 1/2" | 8-32 | 1/4" | 9/32" | 1/16" | 1,500 | 90 | 250 | 50 | 245° | Ball | Mounting Hardware | 0000000 | 00000 |
| 5/8" | 13/64" | 1/4" | 5/8" | 10-32 | 3/8" | 3/8" | 1/16" | 1,500 | 120 | 330 | 120 | 245° | Ball | Mounting Hardware | 0000000 | 00000 |
| 5/8" | 7/16" | 1/4" | 5/8" | 10-32 | 3/8" | 3/8" | 1/16" | 1,500 | 170 | 450 | 80 | 245° | Ball | Mounting Hardware | 0000000 | 00000 |
| 3/4" | 9/32" | 1/4" | 5/8" | 10-32 | 3/8" | 3/8" | 1/16" | 1,500 | 190 | 500 | 150 | 245° | Ball | Mounting Hardware | 0000000 | 00000 |
| 3/4" | 1/2" | 1/4" | 5/8" | 10-32 | 3/8" | 3/8" | 1/16" | 1,500 | 200 | 500 | 120 | 245° | Ball | Mounting Hardware | 0000000 | 00000 |
| 7/8" | 5/8" | 1/4" | 5/8" | 10-32 | 3/8" | 3/8" | 1/16" | 1,500 | 300 | 800 | 150 | 245° | Ball | Mounting Hardware | 0000000 | 00000 |
Threaded V-Groove Track Rollers
Thread the stud directly into a component or secure with a nut for through-hole mounting. Rollers are for use with Angle Rails for V-Groove Track Rollers. They handle radial and thrust (top and side) loads and work well in dirty environments because debris falls off the angled rail. Also known as cam followers, track rollers support loads while guiding and positioning work. All rollers are permanently lubricated.
Rollers with a seal block out dust and other contaminants better than shielded rollers, but they hold more heat. Their seal also helps retain lubricant.
For technical drawings and 3-D models, click on a part number.
Roller | Stud | Thread | Shoulder | Groove | Radial Load Cap., lbs. | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Dia. | Wd. | Dia. | Lg. | Size | Lg. | Dia. | Lg. | Wd. | Dp. | Max. Speed, rpm | Static | Dynamic | Static Thrust Load Cap., lbs. | Max. Temp., °F | Bearing Type | Includes | Each | |
Steel V-Groove Rollers with Seal | ||||||||||||||||||
| 1 1/2" | 3/4" | 7/16" | 1" | 7/16"-20 | 1/2" | 1/2" | 1/32" | 3/8" | 3/16" | 8,000 | 230 | 230 | 140 | 225° | Ball | Mounting Hardware | 0000000 | 000000 |
| 2" | 13/16" | 1/2" | 1 1/4" | 1/2"-20 | 5/8" | 5/8" | 1/32" | 5/8" | 5/16" | 6,000 | 600 | 500 | 370 | 225° | Ball | Mounting Hardware | 0000000 | 000000 |
| 2 1/2" | 1 1/4" | 3/4" | 1 3/4" | 3/4"-16 | 7/8" | 1" | 1/16" | 1" | 1/2" | 6,000 | 1,100 | 1,000 | 680 | 225° | Ball | Mounting Hardware | 0000000 | 000000 |
| 3 1/2" | 1 5/8" | 7/8" | 2" | 7/8"-14 | 1 1/8" | 1" | 1/16" | 1 1/4" | 5/8" | 4,000 | 2,200 | 1,900 | 1,400 | 225° | Ball | Mounting Hardware | 0000000 | 000000 |
Miniature Pass-Through Drawer Slides
The size of a finger, these tiny slides open in both directions. All have ball bearings for smooth operation.
Stainless steel slides resist corrosion, so they're commonly used in medical, laboratory, and other fixtures that are often cleaned.
For technical drawings and 3-D models, click on a part number.
Mounting | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Closed Lg. | Travel Lg. | Wd. | Ht. | Capacity per Pair (Mounting Location) | Roller Type | Fasteners Included | Screw Size | Pair | |
304 Stainless Steel | |||||||||
| 3 1/8" | 1 7/8" | 3/16" | 5/8" | 22 lbs. (Side) | Ball Bearing | No | M2.6 | 0000000 | 000000 |
| 3 15/16" | 2 11/16" | 3/16" | 5/8" | 24 lbs. (Side) | Ball Bearing | No | M2.6 | 0000000 | 00000 |
| 5 7/8" | 3 3/4" | 3/16" | 5/8" | 26 lbs. (Side) | Ball Bearing | No | M2.6 | 0000000 | 00000 |
Anodized Aluminum | |||||||||
| 2 3/4" | 1 3/16" | 3/16" | 5/8" | 6 1/2 lbs. (Side), 2 lbs. (Base) | Ball Bearing | No | M2.6 | 0000000 | 00000 |
| 3 15/16" | 1 9/16" | 3/16" | 5/8" | 11 lbs. (Side), 4 lbs. (Base) | Ball Bearing | No | M2.6 | 0000000 | 00000 |
| 5 7/8" | 3 1/16" | 3/16" | 5/8" | 15 lbs. (Side), 6 1/2 lbs. (Base) | Ball Bearing | No | M2.6 | 0000000 | 00000 |
Miniature Drawer Slides
Half the length of other drawer slides we sell, these slides install in small-parts cabinets. They fully extend for access to the back of drawers. All have ball bearing rollers for smooth, quiet operation. Mount to the sides of drawer openings in cabinets.
Stainless steel slides are commonly used in laboratories and other environments that may get wet and require regular cleaning.
For technical drawings and 3-D models, click on a part number.
Mounting | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Closed Lg. | Travel Lg. | Wd. | Ht. | Capacity per Pair, lbs. | Roller Type | Fasteners Included | Screw Size | Pair | |
304 Stainless Steel | |||||||||
| 3 1/8" | 3 13/16" | 3/8" | 5/8" | 22 | Ball Bearing | No | No. 3 | 0000000 | 000000 |
| 3 15/16" | 4 15/16" | 3/8" | 5/8" | 24 | Ball Bearing | No | No. 3 | 0000000 | 00000 |
| 5 7/8" | 6 15/16" | 3/8" | 5/8" | 26 | Ball Bearing | No | No. 3 | 0000000 | 00000 |
Anodized Aluminum | |||||||||
| 3 1/8" | 3" | 7/16" | 5/8" | 4 | Ball Bearing | No | No. 3 | 0000000 | 00000 |
| 3 15/16" | 4 9/16" | 7/16" | 5/8" | 6 1/2 | Ball Bearing | No | No. 3 | 0000000 | 00000 |
| 5 7/8" | 5 15/16" | 7/16" | 5/8" | 8 1/2 | Ball Bearing | No | No. 3 | 0000000 | 00000 |